* [Qemu-devel] [PATCH v10 1/4] vhost-user: add new vhost user messages to support virtio config space
2018-01-04 1:53 [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Changpeng Liu
@ 2018-01-04 1:53 ` Changpeng Liu
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 2/4] vhost-user-blk: introduce a new vhost-user-blk host device Changpeng Liu
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Changpeng Liu @ 2018-01-04 1:53 UTC (permalink / raw)
To: changpeng.liu, qemu-devel
Cc: stefanha, pbonzini, mst, marcandre.lureau, felipe, james.r.harris
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be
used for live migration of vhost user devices, also vhost user devices
can benefit from the messages to get/set virtio config space from/to the
I/O target. For the purpose to support virtio config space change,
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier
in case virtio config space change in the slave I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
---
docs/interop/vhost-user.txt | 55 ++++++++++++++++++
hw/virtio/vhost-user.c | 118 ++++++++++++++++++++++++++++++++++++++
hw/virtio/vhost.c | 32 +++++++++++
include/hw/virtio/vhost-backend.h | 12 ++++
include/hw/virtio/vhost.h | 15 +++++
5 files changed, 232 insertions(+)
diff --git a/docs/interop/vhost-user.txt b/docs/interop/vhost-user.txt
index 954771d..9a5cb6a 100644
--- a/docs/interop/vhost-user.txt
+++ b/docs/interop/vhost-user.txt
@@ -116,6 +116,19 @@ Depending on the request type, payload can be:
- 3: IOTLB invalidate
- 4: IOTLB access fail
+ * Virtio device config space
+ -----------------------------------
+ | offset | size | flags | payload |
+ -----------------------------------
+
+ Offset: a 32-bit offset of virtio device's configuration space
+ Size: a 32-bit configuration space access size in bytes
+ Flags: a 32-bit value:
+ - 0: Vhost master messages used for writeable fields
+ - 1: Vhost master messages used for live migration
+ Payload: Size bytes array holding the contents of the virtio
+ device's configuration space
+
In QEMU the vhost-user message is implemented with the following struct:
typedef struct VhostUserMsg {
@@ -129,6 +142,7 @@ typedef struct VhostUserMsg {
VhostUserMemory memory;
VhostUserLog log;
struct vhost_iotlb_msg iotlb;
+ VhostUserConfig config;
};
} QEMU_PACKED VhostUserMsg;
@@ -596,6 +610,32 @@ Master message types
and expect this message once (per VQ) during device configuration
(ie. before the master starts the VQ).
+ * VHOST_USER_GET_CONFIG
+
+ Id: 24
+ Equivalent ioctl: N/A
+ Master payload: virtio device config space
+ Slave payload: virtio device config space
+
+ Submitted by the vhost-user master to fetch the contents of the virtio
+ device configuration space, vhost-user slave's payload size MUST match
+ master's request, vhost-user slave uses zero length of payload to
+ indicate an error to vhost-user master. The vhost-user master may
+ cache the contents to avoid repeated VHOST_USER_GET_CONFIG calls.
+
+* VHOST_USER_SET_CONFIG
+
+ Id: 25
+ Equivalent ioctl: N/A
+ Master payload: virtio device config space
+ Slave payload: N/A
+
+ Submitted by the vhost-user master when the Guest changes the virtio
+ device configuration space and also can be used for live migration
+ on the destination host. The vhost-user slave must check the flags
+ field, and slaves MUST NOT accept SET_CONFIG for read-only
+ configuration space fields unless the live migration bit is set.
+
Slave message types
-------------------
@@ -614,6 +654,21 @@ Slave message types
This request should be send only when VIRTIO_F_IOMMU_PLATFORM feature
has been successfully negotiated.
+* VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
+
+ Id: 2
+ Equivalent ioctl: N/A
+ Slave payload: N/A
+ Master payload: N/A
+
+ Vhost-user slave sends such messages to notify that the virtio device's
+ configuration space has changed, for those host devices which can support
+ such feature, host driver can send VHOST_USER_GET_CONFIG message to slave
+ to get the latest content. If VHOST_USER_PROTOCOL_F_REPLY_ACK is
+ negotiated, and slave set the VHOST_USER_NEED_REPLY flag, master must
+ respond with zero when operation is successfully completed, or non-zero
+ otherwise.
+
VHOST_USER_PROTOCOL_F_REPLY_ACK:
-------------------------------
The original vhost-user specification only demands replies for certain
diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
index 093675e..8b94688 100644
--- a/hw/virtio/vhost-user.c
+++ b/hw/virtio/vhost-user.c
@@ -26,6 +26,11 @@
#define VHOST_MEMORY_MAX_NREGIONS 8
#define VHOST_USER_F_PROTOCOL_FEATURES 30
+/*
+ * Maximum size of virtio device config space
+ */
+#define VHOST_USER_MAX_CONFIG_SIZE 256
+
enum VhostUserProtocolFeature {
VHOST_USER_PROTOCOL_F_MQ = 0,
VHOST_USER_PROTOCOL_F_LOG_SHMFD = 1,
@@ -65,12 +70,15 @@ typedef enum VhostUserRequest {
VHOST_USER_SET_SLAVE_REQ_FD = 21,
VHOST_USER_IOTLB_MSG = 22,
VHOST_USER_SET_VRING_ENDIAN = 23,
+ VHOST_USER_GET_CONFIG = 24,
+ VHOST_USER_SET_CONFIG = 25,
VHOST_USER_MAX
} VhostUserRequest;
typedef enum VhostUserSlaveRequest {
VHOST_USER_SLAVE_NONE = 0,
VHOST_USER_SLAVE_IOTLB_MSG = 1,
+ VHOST_USER_SLAVE_CONFIG_CHANGE_MSG = 2,
VHOST_USER_SLAVE_MAX
} VhostUserSlaveRequest;
@@ -92,6 +100,18 @@ typedef struct VhostUserLog {
uint64_t mmap_offset;
} VhostUserLog;
+typedef struct VhostUserConfig {
+ uint32_t offset;
+ uint32_t size;
+ uint32_t flags;
+ uint8_t region[VHOST_USER_MAX_CONFIG_SIZE];
+} VhostUserConfig;
+
+static VhostUserConfig c __attribute__ ((unused));
+#define VHOST_USER_CONFIG_HDR_SIZE (sizeof(c.offset) \
+ + sizeof(c.size) \
+ + sizeof(c.flags))
+
typedef struct VhostUserMsg {
VhostUserRequest request;
@@ -109,6 +129,7 @@ typedef struct VhostUserMsg {
VhostUserMemory memory;
VhostUserLog log;
struct vhost_iotlb_msg iotlb;
+ VhostUserConfig config;
} payload;
} QEMU_PACKED VhostUserMsg;
@@ -608,6 +629,21 @@ static int vhost_user_reset_device(struct vhost_dev *dev)
return 0;
}
+static int vhost_user_slave_handle_config_change(struct vhost_dev *dev)
+{
+ int ret = -1;
+
+ if (!dev->config_ops) {
+ return -1;
+ }
+
+ if (dev->config_ops->vhost_dev_config_notifier) {
+ ret = dev->config_ops->vhost_dev_config_notifier(dev);
+ }
+
+ return ret;
+}
+
static void slave_read(void *opaque)
{
struct vhost_dev *dev = opaque;
@@ -640,6 +676,9 @@ static void slave_read(void *opaque)
case VHOST_USER_SLAVE_IOTLB_MSG:
ret = vhost_backend_handle_iotlb_msg(dev, &msg.payload.iotlb);
break;
+ case VHOST_USER_SLAVE_CONFIG_CHANGE_MSG :
+ ret = vhost_user_slave_handle_config_change(dev);
+ break;
default:
error_report("Received unexpected msg type.");
ret = -EINVAL;
@@ -922,6 +961,83 @@ static void vhost_user_set_iotlb_callback(struct vhost_dev *dev, int enabled)
/* No-op as the receive channel is not dedicated to IOTLB messages. */
}
+static int vhost_user_get_config(struct vhost_dev *dev, uint8_t *config,
+ uint32_t config_len)
+{
+ VhostUserMsg msg = {
+ msg.request = VHOST_USER_GET_CONFIG,
+ msg.flags = VHOST_USER_VERSION,
+ msg.size = VHOST_USER_CONFIG_HDR_SIZE + config_len,
+ };
+
+ if (config_len > VHOST_USER_MAX_CONFIG_SIZE) {
+ return -1;
+ }
+
+ msg.payload.config.offset = 0;
+ msg.payload.config.size = config_len;
+ if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+ return -1;
+ }
+
+ if (vhost_user_read(dev, &msg) < 0) {
+ return -1;
+ }
+
+ if (msg.request != VHOST_USER_GET_CONFIG) {
+ error_report("Received unexpected msg type. Expected %d received %d",
+ VHOST_USER_GET_CONFIG, msg.request);
+ return -1;
+ }
+
+ if (msg.size != VHOST_USER_CONFIG_HDR_SIZE + config_len) {
+ error_report("Received bad msg size.");
+ return -1;
+ }
+
+ memcpy(config, msg.payload.config.region, config_len);
+
+ return 0;
+}
+
+static int vhost_user_set_config(struct vhost_dev *dev, const uint8_t *data,
+ uint32_t offset, uint32_t size, uint32_t flags)
+{
+ uint8_t *p;
+ bool reply_supported = virtio_has_feature(dev->protocol_features,
+ VHOST_USER_PROTOCOL_F_REPLY_ACK);
+
+ VhostUserMsg msg = {
+ msg.request = VHOST_USER_SET_CONFIG,
+ msg.flags = VHOST_USER_VERSION,
+ msg.size = VHOST_USER_CONFIG_HDR_SIZE + size,
+ };
+
+ if (reply_supported) {
+ msg.flags |= VHOST_USER_NEED_REPLY_MASK;
+ }
+
+ if (size > VHOST_USER_MAX_CONFIG_SIZE) {
+ return -1;
+ }
+
+ msg.payload.config.offset = offset,
+ msg.payload.config.size = size,
+ msg.payload.config.flags = flags,
+ p = msg.payload.config.region;
+ memcpy(p, data, size);
+
+ if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+ return -1;
+ }
+
+ if (reply_supported) {
+ return process_message_reply(dev, &msg);
+ }
+
+ return 0;
+}
+
const VhostOps user_ops = {
.backend_type = VHOST_BACKEND_TYPE_USER,
.vhost_backend_init = vhost_user_init,
@@ -948,4 +1064,6 @@ const VhostOps user_ops = {
.vhost_net_set_mtu = vhost_user_net_set_mtu,
.vhost_set_iotlb_callback = vhost_user_set_iotlb_callback,
.vhost_send_device_iotlb_msg = vhost_user_send_device_iotlb_msg,
+ .vhost_get_config = vhost_user_get_config,
+ .vhost_set_config = vhost_user_set_config,
};
diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index e4290ce..386aef8 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1505,6 +1505,38 @@ void vhost_ack_features(struct vhost_dev *hdev, const int *feature_bits,
}
}
+int vhost_dev_get_config(struct vhost_dev *hdev, uint8_t *config,
+ uint32_t config_len)
+{
+ assert(hdev->vhost_ops);
+
+ if (hdev->vhost_ops->vhost_get_config) {
+ return hdev->vhost_ops->vhost_get_config(hdev, config, config_len);
+ }
+
+ return -1;
+}
+
+int vhost_dev_set_config(struct vhost_dev *hdev, const uint8_t *data,
+ uint32_t offset, uint32_t size, uint32_t flags)
+{
+ assert(hdev->vhost_ops);
+
+ if (hdev->vhost_ops->vhost_set_config) {
+ return hdev->vhost_ops->vhost_set_config(hdev, data, offset,
+ size, flags);
+ }
+
+ return -1;
+}
+
+void vhost_dev_set_config_notifier(struct vhost_dev *hdev,
+ const VhostDevConfigOps *ops)
+{
+ assert(hdev->vhost_ops);
+ hdev->config_ops = ops;
+}
+
/* Host notifiers must be enabled at this point. */
int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev)
{
diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h
index a7a5f22..592254f 100644
--- a/include/hw/virtio/vhost-backend.h
+++ b/include/hw/virtio/vhost-backend.h
@@ -20,6 +20,11 @@ typedef enum VhostBackendType {
VHOST_BACKEND_TYPE_MAX = 3,
} VhostBackendType;
+typedef enum VhostSetConfigType {
+ VHOST_SET_CONFIG_TYPE_MASTER = 0,
+ VHOST_SET_CONFIG_TYPE_MIGRATION = 1,
+} VhostSetConfigType;
+
struct vhost_dev;
struct vhost_log;
struct vhost_memory;
@@ -84,6 +89,11 @@ typedef void (*vhost_set_iotlb_callback_op)(struct vhost_dev *dev,
int enabled);
typedef int (*vhost_send_device_iotlb_msg_op)(struct vhost_dev *dev,
struct vhost_iotlb_msg *imsg);
+typedef int (*vhost_set_config_op)(struct vhost_dev *dev, const uint8_t *data,
+ uint32_t offset, uint32_t size,
+ uint32_t flags);
+typedef int (*vhost_get_config_op)(struct vhost_dev *dev, uint8_t *config,
+ uint32_t config_len);
typedef struct VhostOps {
VhostBackendType backend_type;
@@ -118,6 +128,8 @@ typedef struct VhostOps {
vhost_vsock_set_running_op vhost_vsock_set_running;
vhost_set_iotlb_callback_op vhost_set_iotlb_callback;
vhost_send_device_iotlb_msg_op vhost_send_device_iotlb_msg;
+ vhost_get_config_op vhost_get_config;
+ vhost_set_config_op vhost_set_config;
} VhostOps;
extern const VhostOps user_ops;
diff --git a/include/hw/virtio/vhost.h b/include/hw/virtio/vhost.h
index 467dc77..1dc2d73 100644
--- a/include/hw/virtio/vhost.h
+++ b/include/hw/virtio/vhost.h
@@ -46,6 +46,12 @@ struct vhost_iommu {
QLIST_ENTRY(vhost_iommu) iommu_next;
};
+typedef struct VhostDevConfigOps {
+ /* Vhost device config space changed callback
+ */
+ int (*vhost_dev_config_notifier)(struct vhost_dev *dev);
+} VhostDevConfigOps;
+
struct vhost_memory;
struct vhost_dev {
VirtIODevice *vdev;
@@ -76,6 +82,7 @@ struct vhost_dev {
QLIST_ENTRY(vhost_dev) entry;
QLIST_HEAD(, vhost_iommu) iommu_list;
IOMMUNotifier n;
+ const VhostDevConfigOps *config_ops;
};
int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
@@ -106,4 +113,12 @@ int vhost_net_set_backend(struct vhost_dev *hdev,
struct vhost_vring_file *file);
int vhost_device_iotlb_miss(struct vhost_dev *dev, uint64_t iova, int write);
+int vhost_dev_get_config(struct vhost_dev *dev, uint8_t *config,
+ uint32_t config_len);
+int vhost_dev_set_config(struct vhost_dev *dev, const uint8_t *data,
+ uint32_t offset, uint32_t size, uint32_t flags);
+/* notifier callback in case vhost device config space changed
+ */
+void vhost_dev_set_config_notifier(struct vhost_dev *dev,
+ const VhostDevConfigOps *ops);
#endif
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* [Qemu-devel] [PATCH v10 2/4] vhost-user-blk: introduce a new vhost-user-blk host device
2018-01-04 1:53 [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Changpeng Liu
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 1/4] vhost-user: add new vhost user messages to support virtio config space Changpeng Liu
@ 2018-01-04 1:53 ` Changpeng Liu
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 3/4] contrib/libvhost-user: enable virtio config space messages Changpeng Liu
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Changpeng Liu @ 2018-01-04 1:53 UTC (permalink / raw)
To: changpeng.liu, qemu-devel
Cc: stefanha, pbonzini, mst, marcandre.lureau, felipe, james.r.harris
This commit introduces a new vhost-user device for block, it uses a
chardev to connect with the backend, same with Qemu virito-blk device,
Guest OS still uses the virtio-blk frontend driver.
To use it, start QEMU with command line like this:
qemu-system-x86_64 \
-chardev socket,id=char0,path=/path/vhost.socket \
-device vhost-user-blk-pci,chardev=char0,num-queues=2, \
bootindex=2... \
Users can use different parameters for `num-queues` and `bootindex`.
Different with exist Qemu virtio-blk host device, it makes more easy
for users to implement their own I/O processing logic, such as all
user space I/O stack against hardware block device. It uses the new
vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config
information from backend process.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
---
default-configs/pci.mak | 1 +
hw/block/Makefile.objs | 3 +
hw/block/vhost-user-blk.c | 359 +++++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.c | 55 ++++++
hw/virtio/virtio-pci.h | 18 ++
include/hw/virtio/vhost-user-blk.h | 41 +++++
6 files changed, 477 insertions(+)
create mode 100644 hw/block/vhost-user-blk.c
create mode 100644 include/hw/virtio/vhost-user-blk.h
diff --git a/default-configs/pci.mak b/default-configs/pci.mak
index e514bde..49a0f28 100644
--- a/default-configs/pci.mak
+++ b/default-configs/pci.mak
@@ -43,3 +43,4 @@ CONFIG_VGA_PCI=y
CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
CONFIG_ROCKER=y
CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
+CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs
index e0ed980..4c19a58 100644
--- a/hw/block/Makefile.objs
+++ b/hw/block/Makefile.objs
@@ -13,3 +13,6 @@ obj-$(CONFIG_SH4) += tc58128.o
obj-$(CONFIG_VIRTIO) += virtio-blk.o
obj-$(CONFIG_VIRTIO) += dataplane/
+ifeq ($(CONFIG_VIRTIO),y)
+obj-$(CONFIG_VHOST_USER_BLK) += vhost-user-blk.o
+endif
diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c
new file mode 100644
index 0000000..b53b4c9
--- /dev/null
+++ b/hw/block/vhost-user-blk.c
@@ -0,0 +1,359 @@
+/*
+ * vhost-user-blk host device
+ *
+ * Copyright(C) 2017 Intel Corporation.
+ *
+ * Authors:
+ * Changpeng Liu <changpeng.liu@intel.com>
+ *
+ * Largely based on the "vhost-user-scsi.c" and "vhost-scsi.c" implemented by:
+ * Felipe Franciosi <felipe@nutanix.com>
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ * Nicholas Bellinger <nab@risingtidesystems.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/typedefs.h"
+#include "qemu/cutils.h"
+#include "qom/object.h"
+#include "hw/qdev-core.h"
+#include "hw/virtio/vhost.h"
+#include "hw/virtio/vhost-user-blk.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-bus.h"
+#include "hw/virtio/virtio-access.h"
+
+static const int user_feature_bits[] = {
+ VIRTIO_BLK_F_SIZE_MAX,
+ VIRTIO_BLK_F_SEG_MAX,
+ VIRTIO_BLK_F_GEOMETRY,
+ VIRTIO_BLK_F_BLK_SIZE,
+ VIRTIO_BLK_F_TOPOLOGY,
+ VIRTIO_BLK_F_MQ,
+ VIRTIO_BLK_F_RO,
+ VIRTIO_BLK_F_FLUSH,
+ VIRTIO_BLK_F_CONFIG_WCE,
+ VIRTIO_F_VERSION_1,
+ VIRTIO_RING_F_INDIRECT_DESC,
+ VIRTIO_RING_F_EVENT_IDX,
+ VIRTIO_F_NOTIFY_ON_EMPTY,
+ VHOST_INVALID_FEATURE_BIT
+};
+
+static void vhost_user_blk_update_config(VirtIODevice *vdev, uint8_t *config)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+
+ memcpy(config, &s->blkcfg, sizeof(struct virtio_blk_config));
+}
+
+static void vhost_user_blk_set_config(VirtIODevice *vdev, const uint8_t *config)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+ struct virtio_blk_config *blkcfg = (struct virtio_blk_config *)config;
+ int ret;
+
+ if (blkcfg->wce == s->blkcfg.wce) {
+ return;
+ }
+
+ ret = vhost_dev_set_config(&s->dev, &blkcfg->wce,
+ offsetof(struct virtio_blk_config, wce),
+ sizeof(blkcfg->wce),
+ VHOST_SET_CONFIG_TYPE_MASTER);
+ if (ret) {
+ error_report("set device config space failed");
+ return;
+ }
+
+ s->blkcfg.wce = blkcfg->wce;
+}
+
+static int vhost_user_blk_handle_config_change(struct vhost_dev *dev)
+{
+ int ret;
+ struct virtio_blk_config blkcfg;
+ VHostUserBlk *s = VHOST_USER_BLK(dev->vdev);
+
+ ret = vhost_dev_get_config(dev, (uint8_t *)&blkcfg,
+ sizeof(struct virtio_blk_config));
+ if (ret < 0) {
+ error_report("get config space failed");
+ return -1;
+ }
+
+ /* valid for resize only */
+ if (blkcfg.capacity != s->blkcfg.capacity) {
+ s->blkcfg.capacity = blkcfg.capacity;
+ memcpy(dev->vdev->config, &s->blkcfg, sizeof(struct virtio_blk_config));
+ virtio_notify_config(dev->vdev);
+ }
+
+ return 0;
+}
+
+const VhostDevConfigOps blk_ops = {
+ .vhost_dev_config_notifier = vhost_user_blk_handle_config_change,
+};
+
+static void vhost_user_blk_start(VirtIODevice *vdev)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ int i, ret;
+
+ if (!k->set_guest_notifiers) {
+ error_report("binding does not support guest notifiers");
+ return;
+ }
+
+ ret = vhost_dev_enable_notifiers(&s->dev, vdev);
+ if (ret < 0) {
+ error_report("Error enabling host notifiers: %d", -ret);
+ return;
+ }
+
+ ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, true);
+ if (ret < 0) {
+ error_report("Error binding guest notifier: %d", -ret);
+ goto err_host_notifiers;
+ }
+
+ s->dev.acked_features = vdev->guest_features;
+ ret = vhost_dev_start(&s->dev, vdev);
+ if (ret < 0) {
+ error_report("Error starting vhost: %d", -ret);
+ goto err_guest_notifiers;
+ }
+
+ /* guest_notifier_mask/pending not used yet, so just unmask
+ * everything here. virtio-pci will do the right thing by
+ * enabling/disabling irqfd.
+ */
+ for (i = 0; i < s->dev.nvqs; i++) {
+ vhost_virtqueue_mask(&s->dev, vdev, i, false);
+ }
+
+ return;
+
+err_guest_notifiers:
+ k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
+err_host_notifiers:
+ vhost_dev_disable_notifiers(&s->dev, vdev);
+}
+
+static void vhost_user_blk_stop(VirtIODevice *vdev)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ int ret;
+
+ if (!k->set_guest_notifiers) {
+ return;
+ }
+
+ vhost_dev_stop(&s->dev, vdev);
+
+ ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
+ if (ret < 0) {
+ error_report("vhost guest notifier cleanup failed: %d", ret);
+ return;
+ }
+
+ vhost_dev_disable_notifiers(&s->dev, vdev);
+}
+
+static void vhost_user_blk_set_status(VirtIODevice *vdev, uint8_t status)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+ bool should_start = status & VIRTIO_CONFIG_S_DRIVER_OK;
+
+ if (!vdev->vm_running) {
+ should_start = false;
+ }
+
+ if (s->dev.started == should_start) {
+ return;
+ }
+
+ if (should_start) {
+ vhost_user_blk_start(vdev);
+ } else {
+ vhost_user_blk_stop(vdev);
+ }
+
+}
+
+static uint64_t vhost_user_blk_get_features(VirtIODevice *vdev,
+ uint64_t features,
+ Error **errp)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+ uint64_t get_features;
+
+ /* Turn on pre-defined features */
+ virtio_add_feature(&features, VIRTIO_BLK_F_SEG_MAX);
+ virtio_add_feature(&features, VIRTIO_BLK_F_GEOMETRY);
+ virtio_add_feature(&features, VIRTIO_BLK_F_TOPOLOGY);
+ virtio_add_feature(&features, VIRTIO_BLK_F_BLK_SIZE);
+ virtio_add_feature(&features, VIRTIO_BLK_F_FLUSH);
+
+ if (s->config_wce) {
+ virtio_add_feature(&features, VIRTIO_BLK_F_CONFIG_WCE);
+ }
+ if (s->config_ro) {
+ virtio_add_feature(&features, VIRTIO_BLK_F_RO);
+ }
+ if (s->num_queues > 1) {
+ virtio_add_feature(&features, VIRTIO_BLK_F_MQ);
+ }
+
+ get_features = vhost_get_features(&s->dev, user_feature_bits, features);
+
+ return get_features;
+}
+
+static void vhost_user_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
+{
+
+}
+
+static void vhost_user_blk_device_realize(DeviceState *dev, Error **errp)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+ int i, ret;
+
+ if (!s->chardev.chr) {
+ error_setg(errp, "vhost-user-blk: chardev is mandatory");
+ return;
+ }
+
+ if (!s->num_queues || s->num_queues > VIRTIO_QUEUE_MAX) {
+ error_setg(errp, "vhost-user-blk: invalid number of IO queues");
+ return;
+ }
+
+ if (!s->queue_size) {
+ error_setg(errp, "vhost-user-blk: queue size must be non-zero");
+ return;
+ }
+
+ virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
+ sizeof(struct virtio_blk_config));
+
+ for (i = 0; i < s->num_queues; i++) {
+ virtio_add_queue(vdev, s->queue_size,
+ vhost_user_blk_handle_output);
+ }
+
+ s->dev.nvqs = s->num_queues;
+ s->dev.vqs = g_new(struct vhost_virtqueue, s->dev.nvqs);
+ s->dev.vq_index = 0;
+ s->dev.backend_features = 0;
+
+ ret = vhost_dev_init(&s->dev, &s->chardev, VHOST_BACKEND_TYPE_USER, 0);
+ if (ret < 0) {
+ error_setg(errp, "vhost-user-blk: vhost initialization failed: %s",
+ strerror(-ret));
+ goto virtio_err;
+ }
+
+ ret = vhost_dev_get_config(&s->dev, (uint8_t *)&s->blkcfg,
+ sizeof(struct virtio_blk_config));
+ if (ret < 0) {
+ error_setg(errp, "vhost-user-blk: get block config failed");
+ goto vhost_err;
+ }
+
+ if (s->blkcfg.num_queues != s->num_queues) {
+ s->blkcfg.num_queues = s->num_queues;
+ }
+
+ vhost_dev_set_config_notifier(&s->dev, &blk_ops);
+
+ return;
+
+vhost_err:
+ vhost_dev_cleanup(&s->dev);
+virtio_err:
+ g_free(s->dev.vqs);
+ virtio_cleanup(vdev);
+}
+
+static void vhost_user_blk_device_unrealize(DeviceState *dev, Error **errp)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBlk *s = VHOST_USER_BLK(dev);
+
+ vhost_user_blk_set_status(vdev, 0);
+ vhost_dev_cleanup(&s->dev);
+ g_free(s->dev.vqs);
+ virtio_cleanup(vdev);
+}
+
+static void vhost_user_blk_instance_init(Object *obj)
+{
+ VHostUserBlk *s = VHOST_USER_BLK(obj);
+
+ device_add_bootindex_property(obj, &s->bootindex, "bootindex",
+ "/disk@0,0", DEVICE(obj), NULL);
+}
+
+static const VMStateDescription vmstate_vhost_user_blk = {
+ .name = "vhost-user-blk",
+ .minimum_version_id = 1,
+ .version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_VIRTIO_DEVICE,
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static Property vhost_user_blk_properties[] = {
+ DEFINE_PROP_CHR("chardev", VHostUserBlk, chardev),
+ DEFINE_PROP_UINT16("num-queues", VHostUserBlk, num_queues, 1),
+ DEFINE_PROP_UINT32("queue-size", VHostUserBlk, queue_size, 128),
+ DEFINE_PROP_BIT("config-wce", VHostUserBlk, config_wce, 0, true),
+ DEFINE_PROP_BIT("config-ro", VHostUserBlk, config_ro, 0, false),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vhost_user_blk_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+ dc->props = vhost_user_blk_properties;
+ dc->vmsd = &vmstate_vhost_user_blk;
+ set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+ vdc->realize = vhost_user_blk_device_realize;
+ vdc->unrealize = vhost_user_blk_device_unrealize;
+ vdc->get_config = vhost_user_blk_update_config;
+ vdc->set_config = vhost_user_blk_set_config;
+ vdc->get_features = vhost_user_blk_get_features;
+ vdc->set_status = vhost_user_blk_set_status;
+}
+
+static const TypeInfo vhost_user_blk_info = {
+ .name = TYPE_VHOST_USER_BLK,
+ .parent = TYPE_VIRTIO_DEVICE,
+ .instance_size = sizeof(VHostUserBlk),
+ .instance_init = vhost_user_blk_instance_init,
+ .class_init = vhost_user_blk_class_init,
+};
+
+static void virtio_register_types(void)
+{
+ type_register_static(&vhost_user_blk_info);
+}
+
+type_init(virtio_register_types)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index e92837c..b5e05d9 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -1976,6 +1976,58 @@ static const TypeInfo virtio_blk_pci_info = {
.class_init = virtio_blk_pci_class_init,
};
+#if defined(CONFIG_VHOST_USER) && defined(CONFIG_LINUX)
+/* vhost-user-blk */
+
+static Property vhost_user_blk_pci_properties[] = {
+ DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0),
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vhost_user_blk_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
+{
+ VHostUserBlkPCI *dev = VHOST_USER_BLK_PCI(vpci_dev);
+ DeviceState *vdev = DEVICE(&dev->vdev);
+
+ qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
+ object_property_set_bool(OBJECT(vdev), true, "realized", errp);
+}
+
+static void vhost_user_blk_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
+ PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
+
+ set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+ dc->props = vhost_user_blk_pci_properties;
+ k->realize = vhost_user_blk_pci_realize;
+ pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
+ pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_BLOCK;
+ pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
+ pcidev_k->class_id = PCI_CLASS_STORAGE_SCSI;
+}
+
+static void vhost_user_blk_pci_instance_init(Object *obj)
+{
+ VHostUserBlkPCI *dev = VHOST_USER_BLK_PCI(obj);
+
+ virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
+ TYPE_VHOST_USER_BLK);
+ object_property_add_alias(obj, "bootindex", OBJECT(&dev->vdev),
+ "bootindex", &error_abort);
+}
+
+static const TypeInfo vhost_user_blk_pci_info = {
+ .name = TYPE_VHOST_USER_BLK_PCI,
+ .parent = TYPE_VIRTIO_PCI,
+ .instance_size = sizeof(VHostUserBlkPCI),
+ .instance_init = vhost_user_blk_pci_instance_init,
+ .class_init = vhost_user_blk_pci_class_init,
+};
+#endif
+
/* virtio-scsi-pci */
static Property virtio_scsi_pci_properties[] = {
@@ -2622,6 +2674,9 @@ static void virtio_pci_register_types(void)
type_register_static(&virtio_9p_pci_info);
#endif
type_register_static(&virtio_blk_pci_info);
+#if defined(CONFIG_VHOST_USER) && defined(CONFIG_LINUX)
+ type_register_static(&vhost_user_blk_pci_info);
+#endif
type_register_static(&virtio_scsi_pci_info);
type_register_static(&virtio_balloon_pci_info);
type_register_static(&virtio_serial_pci_info);
diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
index 12d3a90..813082b 100644
--- a/hw/virtio/virtio-pci.h
+++ b/hw/virtio/virtio-pci.h
@@ -27,6 +27,9 @@
#include "hw/virtio/virtio-gpu.h"
#include "hw/virtio/virtio-crypto.h"
#include "hw/virtio/vhost-user-scsi.h"
+#if defined(CONFIG_VHOST_USER) && defined(CONFIG_LINUX)
+#include "hw/virtio/vhost-user-blk.h"
+#endif
#ifdef CONFIG_VIRTFS
#include "hw/9pfs/virtio-9p.h"
@@ -46,6 +49,7 @@ typedef struct VirtIOSerialPCI VirtIOSerialPCI;
typedef struct VirtIONetPCI VirtIONetPCI;
typedef struct VHostSCSIPCI VHostSCSIPCI;
typedef struct VHostUserSCSIPCI VHostUserSCSIPCI;
+typedef struct VHostUserBlkPCI VHostUserBlkPCI;
typedef struct VirtIORngPCI VirtIORngPCI;
typedef struct VirtIOInputPCI VirtIOInputPCI;
typedef struct VirtIOInputHIDPCI VirtIOInputHIDPCI;
@@ -244,6 +248,20 @@ struct VHostUserSCSIPCI {
VHostUserSCSI vdev;
};
+#if defined(CONFIG_VHOST_USER) && defined(CONFIG_LINUX)
+/*
+ * vhost-user-blk-pci: This extends VirtioPCIProxy.
+ */
+#define TYPE_VHOST_USER_BLK_PCI "vhost-user-blk-pci"
+#define VHOST_USER_BLK_PCI(obj) \
+ OBJECT_CHECK(VHostUserBlkPCI, (obj), TYPE_VHOST_USER_BLK_PCI)
+
+struct VHostUserBlkPCI {
+ VirtIOPCIProxy parent_obj;
+ VHostUserBlk vdev;
+};
+#endif
+
/*
* virtio-blk-pci: This extends VirtioPCIProxy.
*/
diff --git a/include/hw/virtio/vhost-user-blk.h b/include/hw/virtio/vhost-user-blk.h
new file mode 100644
index 0000000..5804cc9
--- /dev/null
+++ b/include/hw/virtio/vhost-user-blk.h
@@ -0,0 +1,41 @@
+/*
+ * vhost-user-blk host device
+ * Copyright(C) 2017 Intel Corporation.
+ *
+ * Authors:
+ * Changpeng Liu <changpeng.liu@intel.com>
+ *
+ * Based on vhost-scsi.h, Copyright IBM, Corp. 2011
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#ifndef VHOST_USER_BLK_H
+#define VHOST_USER_BLK_H
+
+#include "standard-headers/linux/virtio_blk.h"
+#include "qemu-common.h"
+#include "hw/qdev.h"
+#include "hw/block/block.h"
+#include "chardev/char-fe.h"
+#include "hw/virtio/vhost.h"
+
+#define TYPE_VHOST_USER_BLK "vhost-user-blk"
+#define VHOST_USER_BLK(obj) \
+ OBJECT_CHECK(VHostUserBlk, (obj), TYPE_VHOST_USER_BLK)
+
+typedef struct VHostUserBlk {
+ VirtIODevice parent_obj;
+ CharBackend chardev;
+ int32_t bootindex;
+ struct virtio_blk_config blkcfg;
+ uint16_t num_queues;
+ uint32_t queue_size;
+ uint32_t config_wce;
+ uint32_t config_ro;
+ struct vhost_dev dev;
+} VHostUserBlk;
+
+#endif
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* [Qemu-devel] [PATCH v10 3/4] contrib/libvhost-user: enable virtio config space messages
2018-01-04 1:53 [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Changpeng Liu
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 1/4] vhost-user: add new vhost user messages to support virtio config space Changpeng Liu
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 2/4] vhost-user-blk: introduce a new vhost-user-blk host device Changpeng Liu
@ 2018-01-04 1:53 ` Changpeng Liu
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 4/4] contrib/vhost-user-blk: introduce a vhost-user-blk sample application Changpeng Liu
2018-01-04 11:07 ` [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Marc-André Lureau
4 siblings, 0 replies; 7+ messages in thread
From: Changpeng Liu @ 2018-01-04 1:53 UTC (permalink / raw)
To: changpeng.liu, qemu-devel
Cc: stefanha, pbonzini, mst, marcandre.lureau, felipe, james.r.harris
Enable VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages in
libvhost-user library, users can implement their own I/O target
based on the library. This enable the virtio config space delivered
between QEMU host device and the I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
---
contrib/libvhost-user/libvhost-user.c | 42 +++++++++++++++++++++++++++++++++++
contrib/libvhost-user/libvhost-user.h | 33 +++++++++++++++++++++++++++
2 files changed, 75 insertions(+)
diff --git a/contrib/libvhost-user/libvhost-user.c b/contrib/libvhost-user/libvhost-user.c
index f409bd3..27cc597 100644
--- a/contrib/libvhost-user/libvhost-user.c
+++ b/contrib/libvhost-user/libvhost-user.c
@@ -84,6 +84,8 @@ vu_request_to_string(unsigned int req)
REQ(VHOST_USER_SET_SLAVE_REQ_FD),
REQ(VHOST_USER_IOTLB_MSG),
REQ(VHOST_USER_SET_VRING_ENDIAN),
+ REQ(VHOST_USER_GET_CONFIG),
+ REQ(VHOST_USER_SET_CONFIG),
REQ(VHOST_USER_MAX),
};
#undef REQ
@@ -798,6 +800,42 @@ vu_set_slave_req_fd(VuDev *dev, VhostUserMsg *vmsg)
}
static bool
+vu_get_config(VuDev *dev, VhostUserMsg *vmsg)
+{
+ int ret = -1;
+
+ if (dev->iface->get_config) {
+ ret = dev->iface->get_config(dev, vmsg->payload.config.region,
+ vmsg->payload.config.size);
+ }
+
+ if (ret) {
+ /* resize to zero to indicate an error to master */
+ vmsg->size = 0;
+ }
+
+ return true;
+}
+
+static bool
+vu_set_config(VuDev *dev, VhostUserMsg *vmsg)
+{
+ int ret = -1;
+
+ if (dev->iface->set_config) {
+ ret = dev->iface->set_config(dev, vmsg->payload.config.region,
+ vmsg->payload.config.offset,
+ vmsg->payload.config.size,
+ vmsg->payload.config.flags);
+ if (ret) {
+ vu_panic(dev, "Set virtio configuration space failed");
+ }
+ }
+
+ return false;
+}
+
+static bool
vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
{
int do_reply = 0;
@@ -862,6 +900,10 @@ vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
return vu_set_vring_enable_exec(dev, vmsg);
case VHOST_USER_SET_SLAVE_REQ_FD:
return vu_set_slave_req_fd(dev, vmsg);
+ case VHOST_USER_GET_CONFIG:
+ return vu_get_config(dev, vmsg);
+ case VHOST_USER_SET_CONFIG:
+ return vu_set_config(dev, vmsg);
case VHOST_USER_NONE:
break;
default:
diff --git a/contrib/libvhost-user/libvhost-user.h b/contrib/libvhost-user/libvhost-user.h
index 2f5864b..f8a730b 100644
--- a/contrib/libvhost-user/libvhost-user.h
+++ b/contrib/libvhost-user/libvhost-user.h
@@ -30,6 +30,16 @@
#define VHOST_MEMORY_MAX_NREGIONS 8
+typedef enum VhostSetConfigType {
+ VHOST_SET_CONFIG_TYPE_MASTER = 0,
+ VHOST_SET_CONFIG_TYPE_MIGRATION = 1,
+} VhostSetConfigType;
+
+/*
+ * Maximum size of virtio device config space
+ */
+#define VHOST_USER_MAX_CONFIG_SIZE 256
+
enum VhostUserProtocolFeature {
VHOST_USER_PROTOCOL_F_MQ = 0,
VHOST_USER_PROTOCOL_F_LOG_SHMFD = 1,
@@ -69,6 +79,8 @@ typedef enum VhostUserRequest {
VHOST_USER_SET_SLAVE_REQ_FD = 21,
VHOST_USER_IOTLB_MSG = 22,
VHOST_USER_SET_VRING_ENDIAN = 23,
+ VHOST_USER_GET_CONFIG = 24,
+ VHOST_USER_SET_CONFIG = 25,
VHOST_USER_MAX
} VhostUserRequest;
@@ -90,6 +102,18 @@ typedef struct VhostUserLog {
uint64_t mmap_offset;
} VhostUserLog;
+typedef struct VhostUserConfig {
+ uint32_t offset;
+ uint32_t size;
+ uint32_t flags;
+ uint8_t region[VHOST_USER_MAX_CONFIG_SIZE];
+} VhostUserConfig;
+
+static VhostUserConfig c __attribute__ ((unused));
+#define VHOST_USER_CONFIG_HDR_SIZE (sizeof(c.offset) \
+ + sizeof(c.size) \
+ + sizeof(c.flags))
+
#if defined(_WIN32)
# define VU_PACKED __attribute__((gcc_struct, packed))
#else
@@ -112,6 +136,7 @@ typedef struct VhostUserMsg {
struct vhost_vring_addr addr;
VhostUserMemory memory;
VhostUserLog log;
+ VhostUserConfig config;
} payload;
int fds[VHOST_MEMORY_MAX_NREGIONS];
@@ -140,6 +165,10 @@ typedef int (*vu_process_msg_cb) (VuDev *dev, VhostUserMsg *vmsg,
int *do_reply);
typedef void (*vu_queue_set_started_cb) (VuDev *dev, int qidx, bool started);
typedef bool (*vu_queue_is_processed_in_order_cb) (VuDev *dev, int qidx);
+typedef int (*vu_get_config_cb) (VuDev *dev, uint8_t *config, uint32_t len);
+typedef int (*vu_set_config_cb) (VuDev *dev, const uint8_t *data,
+ uint32_t offset, uint32_t size,
+ uint32_t flags);
typedef struct VuDevIface {
/* called by VHOST_USER_GET_FEATURES to get the features bitmask */
@@ -162,6 +191,10 @@ typedef struct VuDevIface {
* on unmanaged exit/crash.
*/
vu_queue_is_processed_in_order_cb queue_is_processed_in_order;
+ /* get the config space of the device */
+ vu_get_config_cb get_config;
+ /* set the config space of the device */
+ vu_set_config_cb set_config;
} VuDevIface;
typedef void (*vu_queue_handler_cb) (VuDev *dev, int qidx);
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* [Qemu-devel] [PATCH v10 4/4] contrib/vhost-user-blk: introduce a vhost-user-blk sample application
2018-01-04 1:53 [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Changpeng Liu
` (2 preceding siblings ...)
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 3/4] contrib/libvhost-user: enable virtio config space messages Changpeng Liu
@ 2018-01-04 1:53 ` Changpeng Liu
2018-01-04 11:07 ` [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Marc-André Lureau
4 siblings, 0 replies; 7+ messages in thread
From: Changpeng Liu @ 2018-01-04 1:53 UTC (permalink / raw)
To: changpeng.liu, qemu-devel
Cc: stefanha, pbonzini, mst, marcandre.lureau, felipe, james.r.harris
This commit introduces a vhost-user-blk backend device, it uses UNIX
domain socket to communicate with QEMU. The vhost-user-blk sample
application should be used with QEMU vhost-user-blk-pci device.
To use it, complie with:
make vhost-user-blk
and start like this:
vhost-user-blk -b /dev/sdb -s /path/vhost.socket
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
---
.gitignore | 1 +
Makefile | 3 +
Makefile.objs | 1 +
contrib/vhost-user-blk/Makefile.objs | 1 +
contrib/vhost-user-blk/vhost-user-blk.c | 545 ++++++++++++++++++++++++++++++++
5 files changed, 551 insertions(+)
create mode 100644 contrib/vhost-user-blk/Makefile.objs
create mode 100644 contrib/vhost-user-blk/vhost-user-blk.c
diff --git a/.gitignore b/.gitignore
index 433f64f..704b222 100644
--- a/.gitignore
+++ b/.gitignore
@@ -54,6 +54,7 @@
/module_block.h
/scsi/qemu-pr-helper
/vhost-user-scsi
+/vhost-user-blk
/fsdev/virtfs-proxy-helper
*.tmp
*.[1-9]
diff --git a/Makefile b/Makefile
index d86ecd2..f021fc8 100644
--- a/Makefile
+++ b/Makefile
@@ -331,6 +331,7 @@ dummy := $(call unnest-vars,, \
ivshmem-server-obj-y \
libvhost-user-obj-y \
vhost-user-scsi-obj-y \
+ vhost-user-blk-obj-y \
qga-vss-dll-obj-y \
block-obj-y \
block-obj-m \
@@ -562,6 +563,8 @@ ivshmem-server$(EXESUF): $(ivshmem-server-obj-y) $(COMMON_LDADDS)
endif
vhost-user-scsi$(EXESUF): $(vhost-user-scsi-obj-y) libvhost-user.a
$(call LINK, $^)
+vhost-user-blk$(EXESUF): $(vhost-user-blk-obj-y) libvhost-user.a
+ $(call LINK, $^)
module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
$(call quiet-command,$(PYTHON) $< $@ \
diff --git a/Makefile.objs b/Makefile.objs
index 285c6f3..ae9aef7 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -115,6 +115,7 @@ libvhost-user-obj-y = contrib/libvhost-user/
vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
+vhost-user-blk-obj-y = contrib/vhost-user-blk/
######################################################################
trace-events-subdirs =
diff --git a/contrib/vhost-user-blk/Makefile.objs b/contrib/vhost-user-blk/Makefile.objs
new file mode 100644
index 0000000..72e2cdc
--- /dev/null
+++ b/contrib/vhost-user-blk/Makefile.objs
@@ -0,0 +1 @@
+vhost-user-blk-obj-y = vhost-user-blk.o
diff --git a/contrib/vhost-user-blk/vhost-user-blk.c b/contrib/vhost-user-blk/vhost-user-blk.c
new file mode 100644
index 0000000..67dac81
--- /dev/null
+++ b/contrib/vhost-user-blk/vhost-user-blk.c
@@ -0,0 +1,545 @@
+/*
+ * vhost-user-blk sample application
+ *
+ * Copyright (c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Author:
+ * Changpeng Liu <changpeng.liu@intel.com>
+ *
+ * This work is based on the "vhost-user-scsi" sample and "virtio-blk" driver
+ * implementation by:
+ * Felipe Franciosi <felipe@nutanix.com>
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 only.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "standard-headers/linux/virtio_blk.h"
+#include "contrib/libvhost-user/libvhost-user-glib.h"
+#include "contrib/libvhost-user/libvhost-user.h"
+
+#include <glib.h>
+
+struct virtio_blk_inhdr {
+ unsigned char status;
+};
+
+/* vhost user block device */
+typedef struct VubDev {
+ VugDev parent;
+ int blk_fd;
+ struct virtio_blk_config blkcfg;
+ char *blk_name;
+ GMainLoop *loop;
+} VubDev;
+
+typedef struct VubReq {
+ VuVirtqElement *elem;
+ int64_t sector_num;
+ size_t size;
+ struct virtio_blk_inhdr *in;
+ struct virtio_blk_outhdr *out;
+ VubDev *vdev_blk;
+ struct VuVirtq *vq;
+} VubReq;
+
+/* refer util/iov.c */
+static size_t vub_iov_size(const struct iovec *iov,
+ const unsigned int iov_cnt)
+{
+ size_t len;
+ unsigned int i;
+
+ len = 0;
+ for (i = 0; i < iov_cnt; i++) {
+ len += iov[i].iov_len;
+ }
+ return len;
+}
+
+static void vub_panic_cb(VuDev *vu_dev, const char *buf)
+{
+ VugDev *gdev;
+ VubDev *vdev_blk;
+
+ assert(vu_dev);
+
+ gdev = container_of(vu_dev, VugDev, parent);
+ vdev_blk = container_of(gdev, VubDev, parent);
+ if (buf) {
+ g_warning("vu_panic: %s", buf);
+ }
+
+ g_main_loop_quit(vdev_blk->loop);
+}
+
+static void vub_req_complete(VubReq *req)
+{
+ VugDev *gdev = &req->vdev_blk->parent;
+ VuDev *vu_dev = &gdev->parent;
+
+ /* IO size with 1 extra status byte */
+ vu_queue_push(vu_dev, req->vq, req->elem,
+ req->size + 1);
+ vu_queue_notify(vu_dev, req->vq);
+
+ if (req->elem) {
+ free(req->elem);
+ }
+
+ g_free(req);
+}
+
+static int vub_open(const char *file_name, bool wce)
+{
+ int fd;
+ int flags = O_RDWR;
+
+ if (!wce) {
+ flags |= O_DIRECT;
+ }
+
+ fd = open(file_name, flags);
+ if (fd < 0) {
+ fprintf(stderr, "Cannot open file %s, %s\n", file_name,
+ strerror(errno));
+ return -1;
+ }
+
+ return fd;
+}
+
+static ssize_t
+vub_readv(VubReq *req, struct iovec *iov, uint32_t iovcnt)
+{
+ VubDev *vdev_blk = req->vdev_blk;
+ ssize_t rc;
+
+ if (!iovcnt) {
+ fprintf(stderr, "Invalid Read IOV count\n");
+ return -1;
+ }
+
+ req->size = vub_iov_size(iov, iovcnt);
+ rc = preadv(vdev_blk->blk_fd, iov, iovcnt, req->sector_num * 512);
+ if (rc < 0) {
+ fprintf(stderr, "%s, Sector %"PRIu64", Size %lu failed with %s\n",
+ vdev_blk->blk_name, req->sector_num, req->size,
+ strerror(errno));
+ return -1;
+ }
+
+ return rc;
+}
+
+static ssize_t
+vub_writev(VubReq *req, struct iovec *iov, uint32_t iovcnt)
+{
+ VubDev *vdev_blk = req->vdev_blk;
+ ssize_t rc;
+
+ if (!iovcnt) {
+ fprintf(stderr, "Invalid Write IOV count\n");
+ return -1;
+ }
+
+ req->size = vub_iov_size(iov, iovcnt);
+ rc = pwritev(vdev_blk->blk_fd, iov, iovcnt, req->sector_num * 512);
+ if (rc < 0) {
+ fprintf(stderr, "%s, Sector %"PRIu64", Size %lu failed with %s\n",
+ vdev_blk->blk_name, req->sector_num, req->size,
+ strerror(errno));
+ return -1;
+ }
+
+ return rc;
+}
+
+static void
+vub_flush(VubReq *req)
+{
+ VubDev *vdev_blk = req->vdev_blk;
+
+ fdatasync(vdev_blk->blk_fd);
+}
+
+static int vub_virtio_process_req(VubDev *vdev_blk,
+ VuVirtq *vq)
+{
+ VugDev *gdev = &vdev_blk->parent;
+ VuDev *vu_dev = &gdev->parent;
+ VuVirtqElement *elem;
+ uint32_t type;
+ unsigned in_num;
+ unsigned out_num;
+ VubReq *req;
+
+ elem = vu_queue_pop(vu_dev, vq, sizeof(VuVirtqElement) + sizeof(VubReq));
+ if (!elem) {
+ return -1;
+ }
+
+ /* refer to hw/block/virtio_blk.c */
+ if (elem->out_num < 1 || elem->in_num < 1) {
+ fprintf(stderr, "virtio-blk request missing headers\n");
+ free(elem);
+ return -1;
+ }
+
+ req = g_new0(VubReq, 1);
+ req->vdev_blk = vdev_blk;
+ req->vq = vq;
+ req->elem = elem;
+
+ in_num = elem->in_num;
+ out_num = elem->out_num;
+
+ /* don't support VIRTIO_F_ANY_LAYOUT and virtio 1.0 only */
+ if (elem->out_sg[0].iov_len < sizeof(struct virtio_blk_outhdr)) {
+ fprintf(stderr, "Invalid outhdr size\n");
+ goto err;
+ }
+ req->out = (struct virtio_blk_outhdr *)elem->out_sg[0].iov_base;
+ out_num--;
+
+ if (elem->in_sg[in_num - 1].iov_len < sizeof(struct virtio_blk_inhdr)) {
+ fprintf(stderr, "Invalid inhdr size\n");
+ goto err;
+ }
+ req->in = (struct virtio_blk_inhdr *)elem->in_sg[in_num - 1].iov_base;
+ in_num--;
+
+ type = le32toh(req->out->type);
+ switch (type & ~(VIRTIO_BLK_T_OUT | VIRTIO_BLK_T_BARRIER)) {
+ case VIRTIO_BLK_T_IN: {
+ ssize_t ret = 0;
+ bool is_write = type & VIRTIO_BLK_T_OUT;
+ req->sector_num = le64toh(req->out->sector);
+ if (is_write) {
+ ret = vub_writev(req, &elem->out_sg[1], out_num);
+ } else {
+ ret = vub_readv(req, &elem->in_sg[0], in_num);
+ }
+ if (ret >= 0) {
+ req->in->status = VIRTIO_BLK_S_OK;
+ } else {
+ req->in->status = VIRTIO_BLK_S_IOERR;
+ }
+ vub_req_complete(req);
+ break;
+ }
+ case VIRTIO_BLK_T_FLUSH: {
+ vub_flush(req);
+ req->in->status = VIRTIO_BLK_S_OK;
+ vub_req_complete(req);
+ break;
+ }
+ case VIRTIO_BLK_T_GET_ID: {
+ size_t size = MIN(vub_iov_size(&elem->in_sg[0], in_num),
+ VIRTIO_BLK_ID_BYTES);
+ snprintf(elem->in_sg[0].iov_base, size, "%s", "vhost_user_blk");
+ req->in->status = VIRTIO_BLK_S_OK;
+ req->size = elem->in_sg[0].iov_len;
+ vub_req_complete(req);
+ break;
+ }
+ default: {
+ req->in->status = VIRTIO_BLK_S_UNSUPP;
+ vub_req_complete(req);
+ break;
+ }
+ }
+
+ return 0;
+
+err:
+ free(elem);
+ g_free(req);
+ return -1;
+}
+
+static void vub_process_vq(VuDev *vu_dev, int idx)
+{
+ VugDev *gdev;
+ VubDev *vdev_blk;
+ VuVirtq *vq;
+ int ret;
+
+ if ((idx < 0) || (idx >= VHOST_MAX_NR_VIRTQUEUE)) {
+ fprintf(stderr, "VQ Index out of range: %d\n", idx);
+ vub_panic_cb(vu_dev, NULL);
+ return;
+ }
+
+ gdev = container_of(vu_dev, VugDev, parent);
+ vdev_blk = container_of(gdev, VubDev, parent);
+ assert(vdev_blk);
+
+ vq = vu_get_queue(vu_dev, idx);
+ assert(vq);
+
+ while (1) {
+ ret = vub_virtio_process_req(vdev_blk, vq);
+ if (ret) {
+ break;
+ }
+ }
+}
+
+static void vub_queue_set_started(VuDev *vu_dev, int idx, bool started)
+{
+ VuVirtq *vq;
+
+ assert(vu_dev);
+
+ vq = vu_get_queue(vu_dev, idx);
+ vu_set_queue_handler(vu_dev, vq, started ? vub_process_vq : NULL);
+}
+
+static uint64_t
+vub_get_features(VuDev *dev)
+{
+ return 1ull << VIRTIO_BLK_F_SIZE_MAX |
+ 1ull << VIRTIO_BLK_F_SEG_MAX |
+ 1ull << VIRTIO_BLK_F_TOPOLOGY |
+ 1ull << VIRTIO_BLK_F_BLK_SIZE |
+ 1ull << VIRTIO_BLK_F_FLUSH |
+ 1ull << VIRTIO_BLK_F_CONFIG_WCE |
+ 1ull << VIRTIO_F_VERSION_1 |
+ 1ull << VHOST_USER_F_PROTOCOL_FEATURES;
+}
+
+static int
+vub_get_config(VuDev *vu_dev, uint8_t *config, uint32_t len)
+{
+ VugDev *gdev;
+ VubDev *vdev_blk;
+
+ gdev = container_of(vu_dev, VugDev, parent);
+ vdev_blk = container_of(gdev, VubDev, parent);
+ memcpy(config, &vdev_blk->blkcfg, len);
+
+ return 0;
+}
+
+static int
+vub_set_config(VuDev *vu_dev, const uint8_t *data,
+ uint32_t offset, uint32_t size, uint32_t flags)
+{
+ VugDev *gdev;
+ VubDev *vdev_blk;
+ uint8_t wce;
+ int fd;
+
+ /* don't support live migration */
+ if (flags != VHOST_SET_CONFIG_TYPE_MASTER) {
+ return -1;
+ }
+
+ gdev = container_of(vu_dev, VugDev, parent);
+ vdev_blk = container_of(gdev, VubDev, parent);
+
+ if (offset != offsetof(struct virtio_blk_config, wce) ||
+ size != 1) {
+ return -1;
+ }
+
+ wce = *data;
+ if (wce == vdev_blk->blkcfg.wce) {
+ /* Do nothing as same with old configuration */
+ return 0;
+ }
+
+ vdev_blk->blkcfg.wce = wce;
+ fprintf(stdout, "Write Cache Policy Changed\n");
+ if (vdev_blk->blk_fd >= 0) {
+ close(vdev_blk->blk_fd);
+ vdev_blk->blk_fd = -1;
+ }
+
+ fd = vub_open(vdev_blk->blk_name, wce);
+ if (fd < 0) {
+ fprintf(stderr, "Error to open block device %s\n", vdev_blk->blk_name);
+ vdev_blk->blk_fd = -1;
+ return -1;
+ }
+ vdev_blk->blk_fd = fd;
+
+ return 0;
+}
+
+static const VuDevIface vub_iface = {
+ .get_features = vub_get_features,
+ .queue_set_started = vub_queue_set_started,
+ .get_config = vub_get_config,
+ .set_config = vub_set_config,
+};
+
+static int unix_sock_new(char *unix_fn)
+{
+ int sock;
+ struct sockaddr_un un;
+ size_t len;
+
+ assert(unix_fn);
+
+ sock = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (sock <= 0) {
+ perror("socket");
+ return -1;
+ }
+
+ un.sun_family = AF_UNIX;
+ (void)snprintf(un.sun_path, sizeof(un.sun_path), "%s", unix_fn);
+ len = sizeof(un.sun_family) + strlen(un.sun_path);
+
+ (void)unlink(unix_fn);
+ if (bind(sock, (struct sockaddr *)&un, len) < 0) {
+ perror("bind");
+ goto fail;
+ }
+
+ if (listen(sock, 1) < 0) {
+ perror("listen");
+ goto fail;
+ }
+
+ return sock;
+
+fail:
+ (void)close(sock);
+
+ return -1;
+}
+
+static void vub_free(struct VubDev *vdev_blk)
+{
+ if (!vdev_blk) {
+ return;
+ }
+
+ g_main_loop_unref(vdev_blk->loop);
+ if (vdev_blk->blk_fd >= 0) {
+ close(vdev_blk->blk_fd);
+ }
+ g_free(vdev_blk);
+}
+
+static uint32_t
+vub_get_blocksize(int fd)
+{
+ uint32_t blocksize = 512;
+
+#if defined(__linux__) && defined(BLKSSZGET)
+ if (ioctl(fd, BLKSSZGET, &blocksize) == 0) {
+ return blocklen;
+ }
+#endif
+
+ return blocksize;
+}
+
+static void
+vub_initialize_config(int fd, struct virtio_blk_config *config)
+{
+ off64_t capacity;
+
+ capacity = lseek64(fd, 0, SEEK_END);
+ config->capacity = capacity >> 9;
+ config->blk_size = vub_get_blocksize(fd);
+ config->size_max = 65536;
+ config->seg_max = 128 - 2;
+ config->min_io_size = 1;
+ config->opt_io_size = 1;
+ config->num_queues = 1;
+}
+
+static VubDev *
+vub_new(char *blk_file)
+{
+ VubDev *vdev_blk;
+
+ vdev_blk = g_new0(VubDev, 1);
+ vdev_blk->loop = g_main_loop_new(NULL, FALSE);
+ vdev_blk->blk_fd = vub_open(blk_file, 0);
+ if (vdev_blk->blk_fd < 0) {
+ fprintf(stderr, "Error to open block device %s\n", blk_file);
+ vub_free(vdev_blk);
+ return NULL;
+ }
+ vdev_blk->blkcfg.wce = 0;
+ vdev_blk->blk_name = blk_file;
+
+ /* fill virtio_blk_config with block parameters */
+ vub_initialize_config(vdev_blk->blk_fd, &vdev_blk->blkcfg);
+
+ return vdev_blk;
+}
+
+int main(int argc, char **argv)
+{
+ int opt;
+ char *unix_socket = NULL;
+ char *blk_file = NULL;
+ int lsock = -1, csock = -1;
+ VubDev *vdev_blk = NULL;
+
+ while ((opt = getopt(argc, argv, "b:s:h")) != -1) {
+ switch (opt) {
+ case 'b':
+ blk_file = g_strdup(optarg);
+ break;
+ case 's':
+ unix_socket = g_strdup(optarg);
+ break;
+ case 'h':
+ default:
+ printf("Usage: %s [-b block device or file, -s UNIX domain socket]"
+ " | [ -h ]\n", argv[0]);
+ return 0;
+ }
+ }
+
+ if (!unix_socket || !blk_file) {
+ printf("Usage: %s [-b block device or file, -s UNIX domain socket] |"
+ " [ -h ]\n", argv[0]);
+ return -1;
+ }
+
+ lsock = unix_sock_new(unix_socket);
+ if (lsock < 0) {
+ goto err;
+ }
+
+ csock = accept(lsock, (void *)0, (void *)0);
+ if (csock < 0) {
+ fprintf(stderr, "Accept error %s\n", strerror(errno));
+ goto err;
+ }
+
+ vdev_blk = vub_new(blk_file);
+ if (!vdev_blk) {
+ goto err;
+ }
+
+ vug_init(&vdev_blk->parent, csock, vub_panic_cb, &vub_iface);
+
+ g_main_loop_run(vdev_blk->loop);
+
+ vug_deinit(&vdev_blk->parent);
+
+err:
+ vub_free(vdev_blk);
+ if (csock >= 0) {
+ close(csock);
+ }
+ if (lsock >= 0) {
+ close(lsock);
+ }
+ g_free(unix_socket);
+ g_free(blk_file);
+
+ return 0;
+}
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU
2018-01-04 1:53 [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Changpeng Liu
` (3 preceding siblings ...)
2018-01-04 1:53 ` [Qemu-devel] [PATCH v10 4/4] contrib/vhost-user-blk: introduce a vhost-user-blk sample application Changpeng Liu
@ 2018-01-04 11:07 ` Marc-André Lureau
2018-01-04 23:02 ` Michael S. Tsirkin
4 siblings, 1 reply; 7+ messages in thread
From: Marc-André Lureau @ 2018-01-04 11:07 UTC (permalink / raw)
To: Changpeng Liu
Cc: QEMU, james.r.harris, Michael S. Tsirkin, Stefan Hajnoczi,
Paolo Bonzini, Felipe Franciosi
Hi
On Thu, Jan 4, 2018 at 2:53 AM, Changpeng Liu <changpeng.liu@intel.com> wrote:
> Although virtio scsi specification was designed as a replacement for virtio_blk,
> there are still many users using virtio_blk. QEMU 2.9 introduced a new device
> vhost user scsi which can process I/O in user space for virtio_scsi, this commit
> introduces a new vhost user block host device, which can support virtio_blk in
> Guest OS, and I/O processing in another I/O target.
>
> Due to the limitation for virtio_blk specification, virtio_blk device cannot get
> block information such as capacity, block size etc via the specification, several
> new vhost user messages were added to deliver virtio config space
> information between Qemu and I/O target, VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG
> messages used for get/set config space from/to I/O target, VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
> slave message was added for the event notifier in case the change of virtio config space. Also,
> those messages can be used for vhost device live migration as well.
>
> CHANGES:
> v10: fix the code style error.
> v8-v9: Several small optimization and code cleanup according to the comments.
> v7-v8: Instead using an event file descriptor for event notifier in case of virtio
> configuration space changed, while here used a new vhost-user slave message to deliver
> such event. Several small optimizations to address the comments from v7.
> v6-v7: change the parameter of set configuration function let it only contain valid data buffer.
> v5-v6: add header flags for vhost-user master so that the slave can know the purpose for
> set config, also vhost-user get/set messages' payload doesn't contain invalid data buffers.
> v4-v5: add header offset and size for virtio config space.
> v3-v4: refactoring the vhost user block example patch based on new libvhost-user library.
> v2-v3: add new vhost user message to get/set virtio config space.
>
> Changpeng Liu (4):
> vhost-user: add new vhost user messages to support virtio config space
> vhost-user-blk: introduce a new vhost-user-blk host device
> contrib/libvhost-user: enable virtio config space messages
> contrib/vhost-user-blk: introduce a vhost-user-blk sample application
Series:
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Michael, do you take it?
thanks
>
> .gitignore | 1 +
> Makefile | 3 +
> Makefile.objs | 1 +
> contrib/libvhost-user/libvhost-user.c | 42 +++
> contrib/libvhost-user/libvhost-user.h | 33 ++
> contrib/vhost-user-blk/Makefile.objs | 1 +
> contrib/vhost-user-blk/vhost-user-blk.c | 545 ++++++++++++++++++++++++++++++++
> default-configs/pci.mak | 1 +
> docs/interop/vhost-user.txt | 55 ++++
> hw/block/Makefile.objs | 3 +
> hw/block/vhost-user-blk.c | 359 +++++++++++++++++++++
> hw/virtio/vhost-user.c | 118 +++++++
> hw/virtio/vhost.c | 32 ++
> hw/virtio/virtio-pci.c | 55 ++++
> hw/virtio/virtio-pci.h | 18 ++
> include/hw/virtio/vhost-backend.h | 12 +
> include/hw/virtio/vhost-user-blk.h | 41 +++
> include/hw/virtio/vhost.h | 15 +
> 18 files changed, 1335 insertions(+)
> create mode 100644 contrib/vhost-user-blk/Makefile.objs
> create mode 100644 contrib/vhost-user-blk/vhost-user-blk.c
> create mode 100644 hw/block/vhost-user-blk.c
> create mode 100644 include/hw/virtio/vhost-user-blk.h
>
> --
> 1.9.3
>
>
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU
2018-01-04 11:07 ` [Qemu-devel] [PATCH v10 0/4] Introduce a new vhost-user-blk host device to QEMU Marc-André Lureau
@ 2018-01-04 23:02 ` Michael S. Tsirkin
0 siblings, 0 replies; 7+ messages in thread
From: Michael S. Tsirkin @ 2018-01-04 23:02 UTC (permalink / raw)
To: Marc-André Lureau
Cc: Changpeng Liu, QEMU, james.r.harris, Stefan Hajnoczi,
Paolo Bonzini, Felipe Franciosi
On Thu, Jan 04, 2018 at 12:07:39PM +0100, Marc-André Lureau wrote:
> Hi
>
> On Thu, Jan 4, 2018 at 2:53 AM, Changpeng Liu <changpeng.liu@intel.com> wrote:
> > Although virtio scsi specification was designed as a replacement for virtio_blk,
> > there are still many users using virtio_blk. QEMU 2.9 introduced a new device
> > vhost user scsi which can process I/O in user space for virtio_scsi, this commit
> > introduces a new vhost user block host device, which can support virtio_blk in
> > Guest OS, and I/O processing in another I/O target.
> >
> > Due to the limitation for virtio_blk specification, virtio_blk device cannot get
> > block information such as capacity, block size etc via the specification, several
> > new vhost user messages were added to deliver virtio config space
> > information between Qemu and I/O target, VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG
> > messages used for get/set config space from/to I/O target, VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
> > slave message was added for the event notifier in case the change of virtio config space. Also,
> > those messages can be used for vhost device live migration as well.
> >
> > CHANGES:
> > v10: fix the code style error.
> > v8-v9: Several small optimization and code cleanup according to the comments.
> > v7-v8: Instead using an event file descriptor for event notifier in case of virtio
> > configuration space changed, while here used a new vhost-user slave message to deliver
> > such event. Several small optimizations to address the comments from v7.
> > v6-v7: change the parameter of set configuration function let it only contain valid data buffer.
> > v5-v6: add header flags for vhost-user master so that the slave can know the purpose for
> > set config, also vhost-user get/set messages' payload doesn't contain invalid data buffers.
> > v4-v5: add header offset and size for virtio config space.
> > v3-v4: refactoring the vhost user block example patch based on new libvhost-user library.
> > v2-v3: add new vhost user message to get/set virtio config space.
> >
> > Changpeng Liu (4):
> > vhost-user: add new vhost user messages to support virtio config space
> > vhost-user-blk: introduce a new vhost-user-blk host device
> > contrib/libvhost-user: enable virtio config space messages
> > contrib/vhost-user-blk: introduce a vhost-user-blk sample application
>
> Series:
> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Michael, do you take it?
> thanks
Plan to.
Thanks,
MST
> >
> > .gitignore | 1 +
> > Makefile | 3 +
> > Makefile.objs | 1 +
> > contrib/libvhost-user/libvhost-user.c | 42 +++
> > contrib/libvhost-user/libvhost-user.h | 33 ++
> > contrib/vhost-user-blk/Makefile.objs | 1 +
> > contrib/vhost-user-blk/vhost-user-blk.c | 545 ++++++++++++++++++++++++++++++++
> > default-configs/pci.mak | 1 +
> > docs/interop/vhost-user.txt | 55 ++++
> > hw/block/Makefile.objs | 3 +
> > hw/block/vhost-user-blk.c | 359 +++++++++++++++++++++
> > hw/virtio/vhost-user.c | 118 +++++++
> > hw/virtio/vhost.c | 32 ++
> > hw/virtio/virtio-pci.c | 55 ++++
> > hw/virtio/virtio-pci.h | 18 ++
> > include/hw/virtio/vhost-backend.h | 12 +
> > include/hw/virtio/vhost-user-blk.h | 41 +++
> > include/hw/virtio/vhost.h | 15 +
> > 18 files changed, 1335 insertions(+)
> > create mode 100644 contrib/vhost-user-blk/Makefile.objs
> > create mode 100644 contrib/vhost-user-blk/vhost-user-blk.c
> > create mode 100644 hw/block/vhost-user-blk.c
> > create mode 100644 include/hw/virtio/vhost-user-blk.h
> >
> > --
> > 1.9.3
> >
> >
>
>
>
> --
> Marc-André Lureau
^ permalink raw reply [flat|nested] 7+ messages in thread