From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [Qemu-devel] [PULL 23/52] ucontext: annotate coroutine stack for ASAN
Date: Fri, 12 Jan 2018 12:30:47 +0100 [thread overview]
Message-ID: <1515756676-3860-24-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1515756676-3860-1-git-send-email-pbonzini@redhat.com>
From: Marc-André Lureau <marcandre.lureau@redhat.com>
It helps ASAN to detect more leaks on coroutine stacks, as found in
the following patch.
A similar work would need to be done for sigaltstack & windows fibers
to have similar coverage. Since ucontext is preferred, I didn't bother
checking the other coroutine implementations for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180104160523.22995-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
.travis.yml | 3 ++-
configure | 15 +++++++++++++++
include/qemu/compiler.h | 4 ++++
util/coroutine-ucontext.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 69 insertions(+), 1 deletion(-)
diff --git a/.travis.yml b/.travis.yml
index f583839..f2291e8 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -13,12 +13,13 @@ addons:
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
+ - libgcc-6-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- - libnfs-dev
- libncurses5-dev
+ - libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng12-dev
diff --git a/configure b/configure
index d033286..c785dab 100755
--- a/configure
+++ b/configure
@@ -5186,6 +5186,13 @@ if compile_prog "" "" ; then
fi
##########################################
+# check for asan header
+have_asan_iface_h=yes
+if ! check_include "sanitizer/asan_interface.h" ; then
+ have_asan_iface_h=no
+fi
+
+##########################################
# End of CC checks
# After here, no more $cc or $ld runs
@@ -5198,6 +5205,10 @@ elif test "$debug" = "yes"; then
write_c_skeleton;
if compile_prog "-fsanitize=address" ""; then
CFLAGS="-fsanitize=address $CFLAGS"
+ if test "$have_asan_iface_h" = "no" ; then
+ print_error "ASAN build enabled, but ASAN header missing." \
+ "Without code annotation, the report may be inferior."
+ fi
fi
if compile_prog "-fsanitize=undefined" ""; then
CFLAGS="-fsanitize=undefined $CFLAGS"
@@ -6320,6 +6331,10 @@ if test "$have_utmpx" = "yes" ; then
echo "HAVE_UTMPX=y" >> $config_host_mak
fi
+if test "$have_asan_iface_h" = "yes" ; then
+ echo "HAVE_ASAN_IFACE_H=y" >> $config_host_mak
+fi
+
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
diff --git a/include/qemu/compiler.h b/include/qemu/compiler.h
index 340e5fd..5fcc4f7 100644
--- a/include/qemu/compiler.h
+++ b/include/qemu/compiler.h
@@ -111,4 +111,8 @@
#define GCC_FMT_ATTR(n, m)
#endif
+#ifndef __has_feature
+#define __has_feature(x) 0 /* compatibility with non-clang compilers */
+#endif
+
#endif /* COMPILER_H */
diff --git a/util/coroutine-ucontext.c b/util/coroutine-ucontext.c
index 6621f3f..e53147f 100644
--- a/util/coroutine-ucontext.c
+++ b/util/coroutine-ucontext.c
@@ -31,6 +31,13 @@
#include <valgrind/valgrind.h>
#endif
+#if defined(__SANITIZE_ADDRESS__) || __has_feature(address_sanitizer)
+#ifdef HAVE_ASAN_IFACE_H
+#define CONFIG_ASAN 1
+#include <sanitizer/asan_interface.h>
+#endif
+#endif
+
typedef struct {
Coroutine base;
void *stack;
@@ -59,11 +66,37 @@ union cc_arg {
int i[2];
};
+static void finish_switch_fiber(void *fake_stack_save)
+{
+#ifdef CONFIG_ASAN
+ const void *bottom_old;
+ size_t size_old;
+
+ __sanitizer_finish_switch_fiber(fake_stack_save, &bottom_old, &size_old);
+
+ if (!leader.stack) {
+ leader.stack = (void *)bottom_old;
+ leader.stack_size = size_old;
+ }
+#endif
+}
+
+static void start_switch_fiber(void **fake_stack_save,
+ const void *bottom, size_t size)
+{
+#ifdef CONFIG_ASAN
+ __sanitizer_start_switch_fiber(fake_stack_save, bottom, size);
+#endif
+}
+
static void coroutine_trampoline(int i0, int i1)
{
union cc_arg arg;
CoroutineUContext *self;
Coroutine *co;
+ void *fake_stack_save = NULL;
+
+ finish_switch_fiber(NULL);
arg.i[0] = i0;
arg.i[1] = i1;
@@ -72,9 +105,13 @@ static void coroutine_trampoline(int i0, int i1)
/* Initialize longjmp environment and switch back the caller */
if (!sigsetjmp(self->env, 0)) {
+ start_switch_fiber(&fake_stack_save,
+ leader.stack, leader.stack_size);
siglongjmp(*(sigjmp_buf *)co->entry_arg, 1);
}
+ finish_switch_fiber(fake_stack_save);
+
while (true) {
co->entry(co->entry_arg);
qemu_coroutine_switch(co, co->caller, COROUTINE_TERMINATE);
@@ -87,6 +124,7 @@ Coroutine *qemu_coroutine_new(void)
ucontext_t old_uc, uc;
sigjmp_buf old_env;
union cc_arg arg = {0};
+ void *fake_stack_save = NULL;
/* The ucontext functions preserve signal masks which incurs a
* system call overhead. sigsetjmp(buf, 0)/siglongjmp() does not
@@ -122,8 +160,12 @@ Coroutine *qemu_coroutine_new(void)
/* swapcontext() in, siglongjmp() back out */
if (!sigsetjmp(old_env, 0)) {
+ start_switch_fiber(&fake_stack_save, co->stack, co->stack_size);
swapcontext(&old_uc, &uc);
}
+
+ finish_switch_fiber(fake_stack_save);
+
return &co->base;
}
@@ -169,13 +211,19 @@ qemu_coroutine_switch(Coroutine *from_, Coroutine *to_,
CoroutineUContext *from = DO_UPCAST(CoroutineUContext, base, from_);
CoroutineUContext *to = DO_UPCAST(CoroutineUContext, base, to_);
int ret;
+ void *fake_stack_save = NULL;
current = to_;
ret = sigsetjmp(from->env, 0);
if (ret == 0) {
+ start_switch_fiber(action == COROUTINE_TERMINATE ?
+ NULL : &fake_stack_save, to->stack, to->stack_size);
siglongjmp(to->env, action);
}
+
+ finish_switch_fiber(fake_stack_save);
+
return ret;
}
--
1.8.3.1
next prev parent reply other threads:[~2018-01-12 11:31 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 11:30 [Qemu-devel] [PULL 00/52] Misc patches for 2017-01-12 Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 01/52] scsi-generic: Add share-rw option Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 02/52] scsi: fix scsi_convert_sense crash when in_buf == NULL && in_len == 0 Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 03/52] pc: fail memory hot-plug/unplug with -no-acpi and Q35 machine type Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 04/52] hpet: recover timer offset correctly Paolo Bonzini
2018-01-12 11:47 ` Pavel Dovgalyuk
2018-01-12 12:08 ` Paolo Bonzini
2018-01-12 12:18 ` Pavel Dovgalyuk
2018-01-12 12:21 ` Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 05/52] i386/cpu/kvm: look at PMU's CPUID before setting MSRs Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 06/52] chardev: use backend chr context when watch for fe Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 07/52] chardev: let g_idle_add() be with chardev gcontext Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 08/52] chardev: introduce qemu_chr_timeout_add_ms() Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 09/52] build-sys: fix qemu-ga -pthread linking Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 10/52] build-sys: silence make by default or V=0 Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 11/52] build-sys: add a rule to print a variable Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 12/52] build-sys: compile with -Og or -O1 when --enable-debug Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 13/52] tests/docker: add some sanitizers to fedora dockerfile Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 14/52] tests/docker: add test-debug Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 15/52] build-sys: add some sanitizers when --enable-debug if possible Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 16/52] tests: fix check-qobject leak Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 17/52] vl: fix direct firmware directories leak Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 18/52] readline: add a free function Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 19/52] tests: fix migration-test leak Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 20/52] crypto: fix stack-buffer-overflow error Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 21/52] qemu-config: fix leak in query-command-line-options Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 22/52] tests: fix qmp-test leak Paolo Bonzini
2018-01-12 11:30 ` Paolo Bonzini [this message]
2018-01-12 11:30 ` [Qemu-devel] [PULL 24/52] tests: fix coroutine leak in /basic/entered Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 25/52] mips: fix potential fopen(NULL,...) Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 26/52] disas/s390: fix global-buffer-overflow Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 27/52] scsi-disk: release AioContext in unaligned WRITE SAME case Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 28/52] tests/boot-serial-test: Add tests for microblaze boards Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 29/52] tests/boot-serial-test: Add a test for the moxiesim machine Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 30/52] tests/boot-serial-test: Add support for the raspi2 machine Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 31/52] target/i386: move hflags update code to a function Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 32/52] target/i386: hax: change to use x86_update_hflags Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 33/52] target/i386: hax: Move x86_update_hflags Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 34/52] target-i386: update hflags on Hypervisor.framework Paolo Bonzini
2018-01-12 11:30 ` [Qemu-devel] [PULL 35/52] scripts/qemu-gdb: add simple tcg lock status helper Paolo Bonzini
2018-01-12 12:37 ` Alex Bennée
2018-01-12 11:31 ` [Qemu-devel] [PULL 36/52] scripts/qemu-gdb/timers.py: new helper to dump timer state Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 37/52] icount: fixed saving/restoring of icount warp timers Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 38/52] cpus: unify qemu_*_wait_io_event Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 39/52] irq: fix memory leak Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 40/52] net: Drop unusual use of do { } while (0); Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 41/52] mips: Tweak location of ';' in macros Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 42/52] chardev: Use goto/label instead of do/break/while(0) Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 43/52] chardev: Clean up previous patch indentation Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 44/52] tests: Avoid 'do/while(false); ' in vhost-user-bridge Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 45/52] maint: Fix macros with broken 'do/while(0); ' usage Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 46/52] checkpatch: Enforce proper do/while (0) style Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 47/52] find_ram_offset: Add comments and tracing Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 48/52] find_ram_offset: Align ram_addr_t allocation on long boundaries Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 49/52] block/iscsi: fix initialization of iTask in iscsi_co_get_block_status Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 50/52] cpu: flush TB cache when loading VMState Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 51/52] util/qemu-thread-*: add qemu_lock, locked and unlock trace events Paolo Bonzini
2018-01-12 11:31 ` [Qemu-devel] [PULL 52/52] scripts/analyse-locks-simpletrace.py: script to analyse lock times Paolo Bonzini
2018-01-12 18:38 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515756676-3860-24-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).