From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [Qemu-devel] [PULL 53/53] ucontext: annotate coroutine stack for ASAN
Date: Tue, 16 Jan 2018 00:35:02 +0100 [thread overview]
Message-ID: <1516059302-7169-3-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1516059302-7169-1-git-send-email-pbonzini@redhat.com>
From: Marc-André Lureau <marcandre.lureau@redhat.com>
It helps ASAN to detect more leaks on coroutine stacks, as found in
the following patch.
A similar work would need to be done for sigaltstack & windows fibers
to have similar coverage. Since ucontext is preferred, I didn't bother
checking the other coroutine implementations for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
.travis.yml | 3 ++-
configure | 41 ++++++++++++++++++++++++++++++++++++++--
include/qemu/compiler.h | 4 ++++
util/coroutine-ucontext.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 93 insertions(+), 3 deletions(-)
diff --git a/.travis.yml b/.travis.yml
index f583839..f2291e8 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -13,12 +13,13 @@ addons:
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
+ - libgcc-6-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- - libnfs-dev
- libncurses5-dev
+ - libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng12-dev
diff --git a/configure b/configure
index d033286..3007a2c 100755
--- a/configure
+++ b/configure
@@ -5186,18 +5186,51 @@ if compile_prog "" "" ; then
fi
##########################################
+# checks for ASAN
+
+have_asan=no
+write_c_skeleton
+if compile_prog "-fsanitize=address" ""; then
+ have_asan=yes
+fi
+
+have_asan_iface_h=no
+if check_include "sanitizer/asan_interface.h" ; then
+ have_asan_iface_h=yes
+fi
+
+have_asan_iface_fiber=no
+cat > $TMPC << EOF
+#include <sanitizer/asan_interface.h>
+int main(void) {
+ __sanitizer_start_switch_fiber(0, 0, 0);
+ return 0;
+}
+EOF
+if compile_prog "-fsanitize=address" "" ; then
+ have_asan_iface_fiber=yes
+fi
+
+##########################################
# End of CC checks
# After here, no more $cc or $ld runs
+write_c_skeleton
if test "$gcov" = "yes" ; then
CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS"
LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS"
elif test "$fortify_source" = "yes" ; then
CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
elif test "$debug" = "yes"; then
- write_c_skeleton;
- if compile_prog "-fsanitize=address" ""; then
+ if test "$have_asan" = "yes"; then
CFLAGS="-fsanitize=address $CFLAGS"
+ if test "$have_asan_iface_h" = "no" ; then
+ print_error "ASAN build enabled, but ASAN header missing." \
+ "Without code annotation, the report may be inferior."
+ elif test "$have_asan_iface_fiber" = "no" ; then
+ print_error "ASAN build enabled, but ASAN header is too old." \
+ "Without code annotation, the report may be inferior."
+ fi
fi
if compile_prog "-fsanitize=undefined" ""; then
CFLAGS="-fsanitize=undefined $CFLAGS"
@@ -6320,6 +6353,10 @@ if test "$have_utmpx" = "yes" ; then
echo "HAVE_UTMPX=y" >> $config_host_mak
fi
+if test "$have_asan_iface_fiber" = "yes" ; then
+ echo "HAVE_ASAN_IFACE_FIBER=y" >> $config_host_mak
+fi
+
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
diff --git a/include/qemu/compiler.h b/include/qemu/compiler.h
index 340e5fd..5fcc4f7 100644
--- a/include/qemu/compiler.h
+++ b/include/qemu/compiler.h
@@ -111,4 +111,8 @@
#define GCC_FMT_ATTR(n, m)
#endif
+#ifndef __has_feature
+#define __has_feature(x) 0 /* compatibility with non-clang compilers */
+#endif
+
#endif /* COMPILER_H */
diff --git a/util/coroutine-ucontext.c b/util/coroutine-ucontext.c
index 6621f3f..96af7f5 100644
--- a/util/coroutine-ucontext.c
+++ b/util/coroutine-ucontext.c
@@ -31,6 +31,13 @@
#include <valgrind/valgrind.h>
#endif
+#if defined(__SANITIZE_ADDRESS__) || __has_feature(address_sanitizer)
+#ifdef HAVE_ASAN_IFACE_FIBER
+#define CONFIG_ASAN 1
+#include <sanitizer/asan_interface.h>
+#endif
+#endif
+
typedef struct {
Coroutine base;
void *stack;
@@ -59,11 +66,37 @@ union cc_arg {
int i[2];
};
+static void finish_switch_fiber(void *fake_stack_save)
+{
+#ifdef CONFIG_ASAN
+ const void *bottom_old;
+ size_t size_old;
+
+ __sanitizer_finish_switch_fiber(fake_stack_save, &bottom_old, &size_old);
+
+ if (!leader.stack) {
+ leader.stack = (void *)bottom_old;
+ leader.stack_size = size_old;
+ }
+#endif
+}
+
+static void start_switch_fiber(void **fake_stack_save,
+ const void *bottom, size_t size)
+{
+#ifdef CONFIG_ASAN
+ __sanitizer_start_switch_fiber(fake_stack_save, bottom, size);
+#endif
+}
+
static void coroutine_trampoline(int i0, int i1)
{
union cc_arg arg;
CoroutineUContext *self;
Coroutine *co;
+ void *fake_stack_save = NULL;
+
+ finish_switch_fiber(NULL);
arg.i[0] = i0;
arg.i[1] = i1;
@@ -72,9 +105,13 @@ static void coroutine_trampoline(int i0, int i1)
/* Initialize longjmp environment and switch back the caller */
if (!sigsetjmp(self->env, 0)) {
+ start_switch_fiber(&fake_stack_save,
+ leader.stack, leader.stack_size);
siglongjmp(*(sigjmp_buf *)co->entry_arg, 1);
}
+ finish_switch_fiber(fake_stack_save);
+
while (true) {
co->entry(co->entry_arg);
qemu_coroutine_switch(co, co->caller, COROUTINE_TERMINATE);
@@ -87,6 +124,7 @@ Coroutine *qemu_coroutine_new(void)
ucontext_t old_uc, uc;
sigjmp_buf old_env;
union cc_arg arg = {0};
+ void *fake_stack_save = NULL;
/* The ucontext functions preserve signal masks which incurs a
* system call overhead. sigsetjmp(buf, 0)/siglongjmp() does not
@@ -122,8 +160,12 @@ Coroutine *qemu_coroutine_new(void)
/* swapcontext() in, siglongjmp() back out */
if (!sigsetjmp(old_env, 0)) {
+ start_switch_fiber(&fake_stack_save, co->stack, co->stack_size);
swapcontext(&old_uc, &uc);
}
+
+ finish_switch_fiber(fake_stack_save);
+
return &co->base;
}
@@ -169,13 +211,19 @@ qemu_coroutine_switch(Coroutine *from_, Coroutine *to_,
CoroutineUContext *from = DO_UPCAST(CoroutineUContext, base, from_);
CoroutineUContext *to = DO_UPCAST(CoroutineUContext, base, to_);
int ret;
+ void *fake_stack_save = NULL;
current = to_;
ret = sigsetjmp(from->env, 0);
if (ret == 0) {
+ start_switch_fiber(action == COROUTINE_TERMINATE ?
+ NULL : &fake_stack_save, to->stack, to->stack_size);
siglongjmp(to->env, action);
}
+
+ finish_switch_fiber(fake_stack_save);
+
return ret;
}
--
1.8.3.1
next prev parent reply other threads:[~2018-01-15 23:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-15 23:35 [Qemu-devel] [PULL v3 00/53] Misc changes for 2017-01-12 Paolo Bonzini
2018-01-15 23:35 ` [Qemu-devel] [PULL 46/53] cpu_physical_memory_sync_dirty_bitmap: Another alignment fix Paolo Bonzini
2018-01-15 23:35 ` Paolo Bonzini [this message]
2018-01-16 11:25 ` [Qemu-devel] [PULL v3 00/53] Misc changes for 2017-01-12 Peter Maydell
2018-01-16 11:58 ` Marc-André Lureau
2018-01-16 12:06 ` Peter Maydell
2018-01-16 13:41 ` Paolo Bonzini
2018-01-16 13:47 ` Peter Maydell
2018-01-16 13:54 ` Paolo Bonzini
2018-01-16 14:22 ` Marc-André Lureau
2018-01-16 14:26 ` Paolo Bonzini
2018-01-16 15:46 ` Peter Maydell
2018-01-16 13:50 ` Marc-André Lureau
2018-01-16 14:02 ` Peter Maydell
2018-01-16 14:36 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516059302-7169-3-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).