[Qemu-devel] [PULL 00/24] target-arm queue

[Qemu-devel] [PULL 00/24] target-arm queue

[Peter Maydell]

More arm patches (mostly the SDHCI ones from Philippe)

thanks
-- PMM

The following changes since commit f521eeee3bd060b460c99e605472b7e03967db43:

  Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180115' into staging (2018-01-15 13:17:47 +0000)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180116

for you to fetch changes up to 60765b6ceeb4998a0d4220b3a53f1f185061da77:

  sdhci: add a 'dma' property to the sysbus devices (2018-01-16 13:28:21 +0000)

----------------------------------------------------------------
target-arm queue:
 * SDHCI: cleanups and minor bug fixes
 * target/arm: minor refactor preparatory to fp16 support
 * omap_ssd, ssi-sd, pl181, milkymist-memcard: reset the SD
   card on controller reset (fixes migration failures)
 * target/arm: Handle page table walk load failures correctly
 * hw/arm/virt: Add virt-2.12 machine type
 * get_phys_addr_pmsav7: Support AP=0b111 for v7M
 * hw/intc/armv7m: Support byte and halfword accesses to CFSR

----------------------------------------------------------------
Andrey Smirnov (1):
      sdhci: Implement write method of ACMD12ERRSTS register

Peter Maydell (8):
      hw/intc/armv7m: Support byte and halfword accesses to CFSR
      get_phys_addr_pmsav7: Support AP=0b111 for v7M
      hw/arm/virt: Add virt-2.12 machine type
      target/arm: Handle page table walk load failures correctly
      hw/sd/pl181: Reset SD card on controller reset
      hw/sd/milkymist-memcard: Reset SD card on controller reset
      hw/sd/ssi-sd: Reset SD card on controller reset
      hw/sd/omap_mmc: Reset SD card on controller reset

Philippe Mathieu-Daudé (13):
      sdhci: clean up includes
      sdhci: remove dead code
      sdhci: use DEFINE_SDHCI_COMMON_PROPERTIES() for common sysbus/pci properties
      sdhci: refactor common sysbus/pci class_init() into sdhci_common_class_init()
      sdhci: refactor common sysbus/pci realize() into sdhci_common_realize()
      sdhci: refactor common sysbus/pci unrealize() into sdhci_common_unrealize()
      sdhci: use qemu_log_mask(UNIMP) instead of fprintf()
      sdhci: convert the DPRINT() calls into trace events
      sdhci: move MASK_TRNMOD with other SDHC_TRN* defines in "sd-internal.h"
      sdhci: rename the SDHC_CAPAB register
      sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-only
      sdhci: fix the PCI device, using the PCI address space for DMA
      sdhci: add a 'dma' property to the sysbus devices

Richard Henderson (2):
      target/arm: Split out vfp_expand_imm
      target/arm: Add fp16 support to vfp_expand_imm

 hw/sd/sdhci-internal.h     |   7 +-
 include/hw/sd/sdhci.h      |  19 +++-
 target/arm/internals.h     |  10 ++
 hw/arm/virt.c              |  19 +++-
 hw/intc/armv7m_nvic.c      |  38 ++++---
 hw/sd/milkymist-memcard.c  |   4 +
 hw/sd/omap_mmc.c           |  14 ++-
 hw/sd/pl181.c              |   4 +
 hw/sd/sdhci.c              | 266 +++++++++++++++++++++++++++------------------
 hw/sd/ssi-sd.c             |  25 ++++-
 target/arm/helper.c        |  53 ++++++++-
 target/arm/op_helper.c     |   7 +-
 target/arm/translate-a64.c |  49 ++++++---
 hw/sd/trace-events         |  14 +++
 14 files changed, 362 insertions(+), 167 deletions(-)

[Qemu-devel] [PULL 01/24] hw/intc/armv7m: Support byte and halfword accesses to CFSR

[Peter Maydell]

The Configurable Fault Status Register for ARMv7M and v8M is
supposed to be byte and halfword accessible, but we were only
implementing word accesses. Add support for the other access
sizes, which are used by the Zephyr RTOS.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512742372-31517-1-git-send-email-peter.maydell@linaro.org
---
 hw/intc/armv7m_nvic.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index dd49b6c..8ca6cee 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -896,13 +896,6 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs)
             val |= (1 << 8);
         }
         return val;
-    case 0xd28: /* Configurable Fault Status.  */
-        /* The BFSR bits [15:8] are shared between security states
-         * and we store them in the NS copy
-         */
-        val = cpu->env.v7m.cfsr[attrs.secure];
-        val |= cpu->env.v7m.cfsr[M_REG_NS] & R_V7M_CFSR_BFSR_MASK;
-        return val;
     case 0xd2c: /* Hard Fault Status.  */
         return cpu->env.v7m.hfsr;
     case 0xd30: /* Debug Fault Status.  */
@@ -1280,15 +1273,6 @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value,
         s->vectors[ARMV7M_EXCP_DEBUG].active = (value & (1 << 8)) != 0;
         nvic_irq_update(s);
         break;
-    case 0xd28: /* Configurable Fault Status.  */
-        cpu->env.v7m.cfsr[attrs.secure] &= ~value; /* W1C */
-        if (attrs.secure) {
-            /* The BFSR bits [15:8] are shared between security states
-             * and we store them in the NS copy.
-             */
-            cpu->env.v7m.cfsr[M_REG_NS] &= ~(value & R_V7M_CFSR_BFSR_MASK);
-        }
-        break;
     case 0xd2c: /* Hard Fault Status.  */
         cpu->env.v7m.hfsr &= ~value; /* W1C */
         break;
@@ -1667,6 +1651,14 @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr,
             val = deposit32(val, i * 8, 8, get_prio(s, hdlidx, sbank));
         }
         break;
+    case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */
+        /* The BFSR bits [15:8] are shared between security states
+         * and we store them in the NS copy
+         */
+        val = s->cpu->env.v7m.cfsr[attrs.secure];
+        val |= s->cpu->env.v7m.cfsr[M_REG_NS] & R_V7M_CFSR_BFSR_MASK;
+        val = extract32(val, (offset - 0xd28) * 8, size * 8);
+        break;
     case 0xfe0 ... 0xfff: /* ID.  */
         if (offset & 3) {
             val = 0;
@@ -1765,6 +1757,20 @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
         }
         nvic_irq_update(s);
         return MEMTX_OK;
+    case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */
+        /* All bits are W1C, so construct 32 bit value with 0s in
+         * the parts not written by the access size
+         */
+        value <<= ((offset - 0xd28) * 8);
+
+        s->cpu->env.v7m.cfsr[attrs.secure] &= ~value;
+        if (attrs.secure) {
+            /* The BFSR bits [15:8] are shared between security states
+             * and we store them in the NS copy.
+             */
+            s->cpu->env.v7m.cfsr[M_REG_NS] &= ~(value & R_V7M_CFSR_BFSR_MASK);
+        }
+        return MEMTX_OK;
     }
     if (size == 4) {
         nvic_writel(s, offset, value, attrs);
-- 
2.7.4

[Qemu-devel] [PULL 02/24] get_phys_addr_pmsav7: Support AP=0b111 for v7M

[Peter Maydell]

For PMSAv7, the v7A/R Arm ARM defines that setting AP to 0b111
is an UNPREDICTABLE reserved combination. However, for v7M
this value is documented as having the same behaviour as 0b110:
read-only for both privileged and unprivileged. Accept this
value on an M profile core rather than treating it as a guest
error and a no-access page.

Reported-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512742402-31669-1-git-send-email-peter.maydell@linaro.org
---
 target/arm/helper.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index d1395f9..eb80f79 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -9272,6 +9272,13 @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address,
                 case 6:
                     *prot |= PAGE_READ | PAGE_EXEC;
                     break;
+                case 7:
+                    /* for v7M, same as 6; for R profile a reserved value */
+                    if (arm_feature(env, ARM_FEATURE_M)) {
+                        *prot |= PAGE_READ | PAGE_EXEC;
+                        break;
+                    }
+                    /* fall through */
                 default:
                     qemu_log_mask(LOG_GUEST_ERROR,
                                   "DRACR[%d]: Bad value for AP bits: 0x%"
@@ -9290,6 +9297,13 @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address,
                 case 6:
                     *prot |= PAGE_READ | PAGE_EXEC;
                     break;
+                case 7:
+                    /* for v7M, same as 6; for R profile a reserved value */
+                    if (arm_feature(env, ARM_FEATURE_M)) {
+                        *prot |= PAGE_READ | PAGE_EXEC;
+                        break;
+                    }
+                    /* fall through */
                 default:
                     qemu_log_mask(LOG_GUEST_ERROR,
                                   "DRACR[%d]: Bad value for AP bits: 0x%"
-- 
2.7.4

[Qemu-devel] [PULL 03/24] hw/arm/virt: Add virt-2.12 machine type

[Peter Maydell]

Add virt-2.12 machine type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 151592b..543f9bd 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1618,7 +1618,7 @@ static void machvirt_machine_init(void)
 }
 type_init(machvirt_machine_init);
 
-static void virt_2_11_instance_init(Object *obj)
+static void virt_2_12_instance_init(Object *obj)
 {
     VirtMachineState *vms = VIRT_MACHINE(obj);
     VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
@@ -1678,10 +1678,25 @@ static void virt_2_11_instance_init(Object *obj)
     vms->irqmap = a15irqmap;
 }
 
+static void virt_machine_2_12_options(MachineClass *mc)
+{
+}
+DEFINE_VIRT_MACHINE_AS_LATEST(2, 12)
+
+#define VIRT_COMPAT_2_11 \
+    HW_COMPAT_2_11
+
+static void virt_2_11_instance_init(Object *obj)
+{
+    virt_2_12_instance_init(obj);
+}
+
 static void virt_machine_2_11_options(MachineClass *mc)
 {
+    virt_machine_2_12_options(mc);
+    SET_MACHINE_COMPAT(mc, VIRT_COMPAT_2_11);
 }
-DEFINE_VIRT_MACHINE_AS_LATEST(2, 11)
+DEFINE_VIRT_MACHINE(2, 11)
 
 #define VIRT_COMPAT_2_10 \
     HW_COMPAT_2_10
-- 
2.7.4

[Qemu-devel] [PULL 04/24] target/arm: Handle page table walk load failures correctly

[Peter Maydell]

Instead of ignoring the response from address_space_ld*()
(indicating an attempt to read a page table descriptor from
an invalid physical address), use it to report the failure
correctly.

Since this is another couple of locations where we need to
decide the value of the ARMMMUFaultInfo ea bit based on a
MemTxResult, we factor out that operation into a helper
function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/internals.h | 10 ++++++++++
 target/arm/helper.c    | 39 ++++++++++++++++++++++++++++++++++-----
 target/arm/op_helper.c |  7 +------
 3 files changed, 45 insertions(+), 11 deletions(-)

diff --git a/target/arm/internals.h b/target/arm/internals.h
index 876854d..89f5d2f 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -687,6 +687,16 @@ static inline uint32_t arm_fi_to_lfsc(ARMMMUFaultInfo *fi)
     return fsc;
 }
 
+static inline bool arm_extabort_type(MemTxResult result)
+{
+    /* The EA bit in syndromes and fault status registers is an
+     * IMPDEF classification of external aborts. ARM implementations
+     * usually use this to indicate AXI bus Decode error (0) or
+     * Slave error (1); in QEMU we follow that.
+     */
+    return result != MEMTX_DECODE_ERROR;
+}
+
 /* Do a page table walk and add page to TLB if possible */
 bool arm_tlb_fill(CPUState *cpu, vaddr address,
                   MMUAccessType access_type, int mmu_idx,
diff --git a/target/arm/helper.c b/target/arm/helper.c
index eb80f79..c83c901 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -8305,6 +8305,7 @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx,
         ret = get_phys_addr_lpae(env, addr, 0, ARMMMUIdx_S2NS, &s2pa,
                                  &txattrs, &s2prot, &s2size, fi, NULL);
         if (ret) {
+            assert(fi->type != ARMFault_None);
             fi->s2addr = addr;
             fi->stage2 = true;
             fi->s1ptw = true;
@@ -8328,7 +8329,9 @@ static uint32_t arm_ldl_ptw(CPUState *cs, hwaddr addr, bool is_secure,
     ARMCPU *cpu = ARM_CPU(cs);
     CPUARMState *env = &cpu->env;
     MemTxAttrs attrs = {};
+    MemTxResult result = MEMTX_OK;
     AddressSpace *as;
+    uint32_t data;
 
     attrs.secure = is_secure;
     as = arm_addressspace(cs, attrs);
@@ -8337,10 +8340,16 @@ static uint32_t arm_ldl_ptw(CPUState *cs, hwaddr addr, bool is_secure,
         return 0;
     }
     if (regime_translation_big_endian(env, mmu_idx)) {
-        return address_space_ldl_be(as, addr, attrs, NULL);
+        data = address_space_ldl_be(as, addr, attrs, &result);
     } else {
-        return address_space_ldl_le(as, addr, attrs, NULL);
+        data = address_space_ldl_le(as, addr, attrs, &result);
     }
+    if (result == MEMTX_OK) {
+        return data;
+    }
+    fi->type = ARMFault_SyncExternalOnWalk;
+    fi->ea = arm_extabort_type(result);
+    return 0;
 }
 
 static uint64_t arm_ldq_ptw(CPUState *cs, hwaddr addr, bool is_secure,
@@ -8349,7 +8358,9 @@ static uint64_t arm_ldq_ptw(CPUState *cs, hwaddr addr, bool is_secure,
     ARMCPU *cpu = ARM_CPU(cs);
     CPUARMState *env = &cpu->env;
     MemTxAttrs attrs = {};
+    MemTxResult result = MEMTX_OK;
     AddressSpace *as;
+    uint32_t data;
 
     attrs.secure = is_secure;
     as = arm_addressspace(cs, attrs);
@@ -8358,10 +8369,16 @@ static uint64_t arm_ldq_ptw(CPUState *cs, hwaddr addr, bool is_secure,
         return 0;
     }
     if (regime_translation_big_endian(env, mmu_idx)) {
-        return address_space_ldq_be(as, addr, attrs, NULL);
+        data = address_space_ldq_be(as, addr, attrs, &result);
     } else {
-        return address_space_ldq_le(as, addr, attrs, NULL);
+        data = address_space_ldq_le(as, addr, attrs, &result);
+    }
+    if (result == MEMTX_OK) {
+        return data;
     }
+    fi->type = ARMFault_SyncExternalOnWalk;
+    fi->ea = arm_extabort_type(result);
+    return 0;
 }
 
 static bool get_phys_addr_v5(CPUARMState *env, uint32_t address,
@@ -8390,6 +8407,9 @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address,
     }
     desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
                        mmu_idx, fi);
+    if (fi->type != ARMFault_None) {
+        goto do_fault;
+    }
     type = (desc & 3);
     domain = (desc >> 5) & 0x0f;
     if (regime_el(env, mmu_idx) == 1) {
@@ -8426,6 +8446,9 @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address,
         }
         desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
                            mmu_idx, fi);
+        if (fi->type != ARMFault_None) {
+            goto do_fault;
+        }
         switch (desc & 3) {
         case 0: /* Page translation fault.  */
             fi->type = ARMFault_Translation;
@@ -8508,6 +8531,9 @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address,
     }
     desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
                        mmu_idx, fi);
+    if (fi->type != ARMFault_None) {
+        goto do_fault;
+    }
     type = (desc & 3);
     if (type == 0 || (type == 3 && !arm_feature(env, ARM_FEATURE_PXN))) {
         /* Section translation fault, or attempt to use the encoding
@@ -8559,6 +8585,9 @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address,
         table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
         desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
                            mmu_idx, fi);
+        if (fi->type != ARMFault_None) {
+            goto do_fault;
+        }
         ap = ((desc >> 4) & 3) | ((desc >> 7) & 4);
         switch (desc & 3) {
         case 0: /* Page translation fault.  */
@@ -8964,7 +8993,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
         descaddr &= ~7ULL;
         nstable = extract32(tableattrs, 4, 1);
         descriptor = arm_ldq_ptw(cs, descaddr, !nstable, mmu_idx, fi);
-        if (fi->s1ptw) {
+        if (fi->type != ARMFault_None) {
             goto do_fault;
         }
 
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index b362063..712c5c5 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -220,12 +220,7 @@ void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
     /* now we have a real cpu fault */
     cpu_restore_state(cs, retaddr);
 
-    /* The EA bit in syndromes and fault status registers is an
-     * IMPDEF classification of external aborts. ARM implementations
-     * usually use this to indicate AXI bus Decode error (0) or
-     * Slave error (1); in QEMU we follow that.
-     */
-    fi.ea = (response != MEMTX_DECODE_ERROR);
+    fi.ea = arm_extabort_type(response);
     fi.type = ARMFault_SyncExternal;
     deliver_fault(cpu, addr, access_type, mmu_idx, &fi);
 }
-- 
2.7.4

[Qemu-devel] [PULL 05/24] hw/sd/pl181: Reset SD card on controller reset

[Peter Maydell]

Since pl181 is still using the legacy SD card API, the SD
card created by sd_init() is not plugged into any bus. This
means that the controller has to reset it manually.

Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but meant that
migration failed because it's only in sd_reset() that we
set up the wpgrps_size field.

Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1739378
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-2-git-send-email-peter.maydell@linaro.org
---
 hw/sd/pl181.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index 55c8098..3ba1f7d 100644
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -480,6 +480,10 @@ static void pl181_reset(DeviceState *d)
 
     /* We can assume our GPIO outputs have been wired up now */
     sd_set_cb(s->card, s->cardstatus[0], s->cardstatus[1]);
+    /* Since we're still using the legacy SD API the card is not plugged
+     * into any bus, and we must reset it manually.
+     */
+    device_reset(DEVICE(s->card));
 }
 
 static void pl181_init(Object *obj)
-- 
2.7.4

[Qemu-devel] [PULL 06/24] hw/sd/milkymist-memcard: Reset SD card on controller reset

[Peter Maydell]

Since milkymist-memcard is still using the legacy SD card API,
the SD card created by sd_init() is not plugged into any bus.
This means that the controller has to reset it manually.

Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but meant that
migration failed because it's only in sd_reset() that we
set up the wpgrps_size field.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-3-git-send-email-peter.maydell@linaro.org
---
 hw/sd/milkymist-memcard.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c
index 4008c81..341da88 100644
--- a/hw/sd/milkymist-memcard.c
+++ b/hw/sd/milkymist-memcard.c
@@ -248,6 +248,10 @@ static void milkymist_memcard_reset(DeviceState *d)
     for (i = 0; i < R_MAX; i++) {
         s->regs[i] = 0;
     }
+    /* Since we're still using the legacy SD API the card is not plugged
+     * into any bus, and we must reset it manually.
+     */
+    device_reset(DEVICE(s->card));
 }
 
 static int milkymist_memcard_init(SysBusDevice *dev)
-- 
2.7.4

[Qemu-devel] [PULL 07/24] hw/sd/ssi-sd: Reset SD card on controller reset

[Peter Maydell]

Since ssi-sd is still using the legacy SD card API, the SD
card created by sd_init() is not plugged into any bus. This
means that the controller has to reset it manually.

Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but meant that
migration failed because it's only in sd_reset() that we
set up the wpgrps_size field.

In the case of sd-ssi, we have to implement an entire
reset function since there wasn't one previously, and
that requires a QOM cast macro that got omitted when this
device was QOMified.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-4-git-send-email-peter.maydell@linaro.org
---
 hw/sd/ssi-sd.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index 24001dc..f88f509 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -50,6 +50,9 @@ typedef struct {
     SDState *sd;
 } ssi_sd_state;
 
+#define TYPE_SSI_SD "ssi-sd"
+#define SSI_SD(obj) OBJECT_CHECK(ssi_sd_state, (obj), TYPE_SSI_SD)
+
 /* State word bits.  */
 #define SSI_SDR_LOCKED          0x0001
 #define SSI_SDR_WP_ERASE        0x0002
@@ -241,7 +244,6 @@ static void ssi_sd_realize(SSISlave *d, Error **errp)
     ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d);
     DriveInfo *dinfo;
 
-    s->mode = SSI_SD_CMD;
     /* FIXME use a qdev drive property instead of drive_get_next() */
     dinfo = drive_get_next(IF_SD);
     s->sd = sd_init(dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, true);
@@ -251,6 +253,24 @@ static void ssi_sd_realize(SSISlave *d, Error **errp)
     }
 }
 
+static void ssi_sd_reset(DeviceState *dev)
+{
+    ssi_sd_state *s = SSI_SD(dev);
+
+    s->mode = SSI_SD_CMD;
+    s->cmd = 0;
+    memset(s->cmdarg, 0, sizeof(s->cmdarg));
+    memset(s->response, 0, sizeof(s->response));
+    s->arglen = 0;
+    s->response_pos = 0;
+    s->stopping = 0;
+
+    /* Since we're still using the legacy SD API the card is not plugged
+     * into any bus, and we must reset it manually.
+     */
+    device_reset(DEVICE(s->sd));
+}
+
 static void ssi_sd_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -260,10 +280,11 @@ static void ssi_sd_class_init(ObjectClass *klass, void *data)
     k->transfer = ssi_sd_transfer;
     k->cs_polarity = SSI_CS_LOW;
     dc->vmsd = &vmstate_ssi_sd;
+    dc->reset = ssi_sd_reset;
 }
 
 static const TypeInfo ssi_sd_info = {
-    .name          = "ssi-sd",
+    .name          = TYPE_SSI_SD,
     .parent        = TYPE_SSI_SLAVE,
     .instance_size = sizeof(ssi_sd_state),
     .class_init    = ssi_sd_class_init,
-- 
2.7.4

[Qemu-devel] [PULL 08/24] hw/sd/omap_mmc: Reset SD card on controller reset

[Peter Maydell]

Since omap_mmc is still using the legacy SD card API, the SD
card created by sd_init() is not plugged into any bus. This
means that the controller has to reset it manually.

Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but would mean that
migration fails because it's only in sd_reset() that we
set up the wpgrps_size field.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-5-git-send-email-peter.maydell@linaro.org
---
 hw/sd/omap_mmc.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
index e934cd3..5b47cad 100644
--- a/hw/sd/omap_mmc.c
+++ b/hw/sd/omap_mmc.c
@@ -305,6 +305,12 @@ void omap_mmc_reset(struct omap_mmc_s *host)
     host->cdet_enable = 0;
     qemu_set_irq(host->coverswitch, host->cdet_state);
     host->clkdiv = 0;
+
+    /* Since we're still using the legacy SD API the card is not plugged
+     * into any bus, and we must reset it manually. When omap_mmc is
+     * QOMified this must move into the QOM reset function.
+     */
+    device_reset(DEVICE(host->card));
 }
 
 static uint64_t omap_mmc_read(void *opaque, hwaddr offset,
@@ -587,8 +593,6 @@ struct omap_mmc_s *omap_mmc_init(hwaddr base,
     s->lines = 1;	/* TODO: needs to be settable per-board */
     s->rev = 1;
 
-    omap_mmc_reset(s);
-
     memory_region_init_io(&s->iomem, NULL, &omap_mmc_ops, s, "omap.mmc", 0x800);
     memory_region_add_subregion(sysmem, base, &s->iomem);
 
@@ -598,6 +602,8 @@ struct omap_mmc_s *omap_mmc_init(hwaddr base,
         exit(1);
     }
 
+    omap_mmc_reset(s);
+
     return s;
 }
 
@@ -613,8 +619,6 @@ struct omap_mmc_s *omap2_mmc_init(struct omap_target_agent_s *ta,
     s->lines = 4;
     s->rev = 2;
 
-    omap_mmc_reset(s);
-
     memory_region_init_io(&s->iomem, NULL, &omap_mmc_ops, s, "omap.mmc",
                           omap_l4_region_size(ta, 0));
     omap_l4_attach(ta, 0, &s->iomem);
@@ -628,6 +632,8 @@ struct omap_mmc_s *omap2_mmc_init(struct omap_target_agent_s *ta,
     s->cdet = qemu_allocate_irq(omap_mmc_cover_cb, s, 0);
     sd_set_cb(s->card, NULL, s->cdet);
 
+    omap_mmc_reset(s);
+
     return s;
 }
 
-- 
2.7.4

[Qemu-devel] [PULL 09/24] target/arm: Split out vfp_expand_imm

[Peter Maydell]

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180110063337.21538-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-a64.c | 44 ++++++++++++++++++++++++++++----------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index ba94f7d..80ae019 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -4985,6 +4985,33 @@ static void disas_fp_3src(DisasContext *s, uint32_t insn)
     }
 }
 
+/* The imm8 encodes the sign bit, enough bits to represent an exponent in
+ * the range 01....1xx to 10....0xx, and the most significant 4 bits of
+ * the mantissa; see VFPExpandImm() in the v8 ARM ARM.
+ */
+static uint64_t vfp_expand_imm(int size, uint8_t imm8)
+{
+    uint64_t imm;
+
+    switch (size) {
+    case MO_64:
+        imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
+            (extract32(imm8, 6, 1) ? 0x3fc0 : 0x4000) |
+            extract32(imm8, 0, 6);
+        imm <<= 48;
+        break;
+    case MO_32:
+        imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
+            (extract32(imm8, 6, 1) ? 0x3e00 : 0x4000) |
+            (extract32(imm8, 0, 6) << 3);
+        imm <<= 16;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+    return imm;
+}
+
 /* Floating point immediate
  *   31  30  29 28       24 23  22  21 20        13 12   10 9    5 4    0
  * +---+---+---+-----------+------+---+------------+-------+------+------+
@@ -5008,22 +5035,7 @@ static void disas_fp_imm(DisasContext *s, uint32_t insn)
         return;
     }
 
-    /* The imm8 encodes the sign bit, enough bits to represent
-     * an exponent in the range 01....1xx to 10....0xx,
-     * and the most significant 4 bits of the mantissa; see
-     * VFPExpandImm() in the v8 ARM ARM.
-     */
-    if (is_double) {
-        imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
-            (extract32(imm8, 6, 1) ? 0x3fc0 : 0x4000) |
-            extract32(imm8, 0, 6);
-        imm <<= 48;
-    } else {
-        imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
-            (extract32(imm8, 6, 1) ? 0x3e00 : 0x4000) |
-            (extract32(imm8, 0, 6) << 3);
-        imm <<= 16;
-    }
+    imm = vfp_expand_imm(MO_32 + is_double, imm8);
 
     tcg_res = tcg_const_i64(imm);
     write_fp_dreg(s, rd, tcg_res);
-- 
2.7.4

[Qemu-devel] [PULL 10/24] target/arm: Add fp16 support to vfp_expand_imm

[Peter Maydell]

From: Richard Henderson <richard.henderson@linaro.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180110063337.21538-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-a64.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 80ae019..cf537e9 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -5006,6 +5006,11 @@ static uint64_t vfp_expand_imm(int size, uint8_t imm8)
             (extract32(imm8, 0, 6) << 3);
         imm <<= 16;
         break;
+    case MO_16:
+        imm = (extract32(imm8, 7, 1) ? 0x8000 : 0) |
+            (extract32(imm8, 6, 1) ? 0x3000 : 0x4000) |
+            (extract32(imm8, 0, 6) << 6);
+        break;
     default:
         g_assert_not_reached();
     }
-- 
2.7.4

[Qemu-devel] [PULL 11/24] sdhci: clean up includes

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci-internal.h | 4 ----
 include/hw/sd/sdhci.h  | 7 ++++++-
 hw/sd/sdhci.c          | 1 +
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h
index 161177c..248fd02 100644
--- a/hw/sd/sdhci-internal.h
+++ b/hw/sd/sdhci-internal.h
@@ -24,8 +24,6 @@
 #ifndef SDHCI_INTERNAL_H
 #define SDHCI_INTERNAL_H
 
-#include "hw/sd/sdhci.h"
-
 /* R/W SDMA System Address register 0x0 */
 #define SDHC_SYSAD                     0x00
 
@@ -227,6 +225,4 @@ enum {
     sdhc_gap_write  = 2   /* SDHC stopped at block gap during write operation */
 };
 
-extern const VMStateDescription sdhci_vmstate;
-
 #endif
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 0f0c3f1..1335373 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -26,17 +26,19 @@
 #define SDHCI_H
 
 #include "qemu-common.h"
-#include "hw/block/block.h"
 #include "hw/pci/pci.h"
 #include "hw/sysbus.h"
 #include "hw/sd/sd.h"
 
 /* SD/MMC host controller state */
 typedef struct SDHCIState {
+    /*< private >*/
     union {
         PCIDevice pcidev;
         SysBusDevice busdev;
     };
+
+    /*< public >*/
     SDBus sdbus;
     MemoryRegion iomem;
 
@@ -46,6 +48,7 @@ typedef struct SDHCIState {
     qemu_irq ro_cb;
     qemu_irq irq;
 
+    /* Registers cleared on reset */
     uint32_t sdmasysad;    /* SDMA System Address register */
     uint16_t blksize;      /* Host DMA Buff Boundary and Transfer BlkSize Reg */
     uint16_t blkcnt;       /* Blocks count for current transfer */
@@ -70,8 +73,10 @@ typedef struct SDHCIState {
     uint16_t acmd12errsts; /* Auto CMD12 error status register */
     uint64_t admasysaddr;  /* ADMA System Address Register */
 
+    /* Read-only registers */
     uint32_t capareg;      /* Capabilities Register */
     uint32_t maxcurr;      /* Maximum Current Capabilities Register */
+
     uint8_t  *fifo_buffer; /* SD host i/o FIFO buffer */
     uint32_t buf_maxsz;
     uint16_t data_count;   /* current element in FIFO buffer */
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index b064a08..b7d2a20 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -29,6 +29,7 @@
 #include "sysemu/dma.h"
 #include "qemu/timer.h"
 #include "qemu/bitops.h"
+#include "hw/sd/sdhci.h"
 #include "sdhci-internal.h"
 #include "qemu/log.h"
 
-- 
2.7.4

[Qemu-devel] [PULL 12/24] sdhci: remove dead code

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/sd/sdhci.h | 2 --
 hw/sd/sdhci.c         | 2 --
 2 files changed, 4 deletions(-)

diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 1335373..dacd726 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -44,8 +44,6 @@ typedef struct SDHCIState {
 
     QEMUTimer *insert_timer;       /* timer for 'changing' sd card. */
     QEMUTimer *transfer_timer;
-    qemu_irq eject_cb;
-    qemu_irq ro_cb;
     qemu_irq irq;
 
     /* Registers cleared on reset */
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index b7d2a20..365bc80 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1200,8 +1200,6 @@ static void sdhci_uninitfn(SDHCIState *s)
     timer_free(s->insert_timer);
     timer_del(s->transfer_timer);
     timer_free(s->transfer_timer);
-    qemu_free_irq(s->eject_cb);
-    qemu_free_irq(s->ro_cb);
 
     g_free(s->fifo_buffer);
     s->fifo_buffer = NULL;
-- 
2.7.4

[Qemu-devel] [PULL 13/24] sdhci: use DEFINE_SDHCI_COMMON_PROPERTIES() for common sysbus/pci properties

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Add common/sysbus/pci/sdbus comments to have clearer code blocks separation.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180115182436.2066-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/sd/sdhci.h |  4 +++-
 hw/sd/sdhci.c         | 25 +++++++++++++++++--------
 2 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index dacd726..8041c96 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -79,13 +79,15 @@ typedef struct SDHCIState {
     uint32_t buf_maxsz;
     uint16_t data_count;   /* current element in FIFO buffer */
     uint8_t  stopped_state;/* Current SDHC state */
-    bool     pending_insert_quirk;/* Quirk for Raspberry Pi card insert int */
     bool     pending_insert_state;
     /* Buffer Data Port Register - virtual access point to R and W buffers */
     /* Software Reset Register - always reads as 0 */
     /* Force Event Auto CMD12 Error Interrupt Reg - write only */
     /* Force Event Error Interrupt Register- write only */
     /* RO Host Controller Version Register always reads as 0x2401 */
+
+    /* Configurable properties */
+    bool pending_insert_quirk; /* Quirk for Raspberry Pi card insert int */
 } SDHCIState;
 
 #define TYPE_PCI_SDHCI "sdhci-pci"
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 365bc80..c0b4b84 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -23,6 +23,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qapi/error.h"
 #include "hw/hw.h"
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
@@ -1185,6 +1186,14 @@ static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
     }
 }
 
+/* --- qdev common --- */
+
+#define DEFINE_SDHCI_COMMON_PROPERTIES(_state) \
+    /* Capabilities registers provide information on supported features
+     * of this specific host controller implementation */ \
+    DEFINE_PROP_UINT32("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \
+    DEFINE_PROP_UINT32("maxcurr", _state, maxcurr, 0)
+
 static void sdhci_initfn(SDHCIState *s)
 {
     qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
@@ -1264,12 +1273,10 @@ const VMStateDescription sdhci_vmstate = {
     },
 };
 
-/* Capabilities registers provide information on supported features of this
- * specific host controller implementation */
+/* --- qdev PCI --- */
+
 static Property sdhci_pci_properties[] = {
-    DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
-            SDHC_CAPAB_REG_DEFAULT),
-    DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
+    DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -1320,10 +1327,10 @@ static const TypeInfo sdhci_pci_info = {
     },
 };
 
+/* --- qdev SysBus --- */
+
 static Property sdhci_sysbus_properties[] = {
-    DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
-            SDHC_CAPAB_REG_DEFAULT),
-    DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
+    DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
     DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
                      false),
     DEFINE_PROP_END_OF_LIST(),
@@ -1374,6 +1381,8 @@ static const TypeInfo sdhci_sysbus_info = {
     .class_init = sdhci_sysbus_class_init,
 };
 
+/* --- qdev bus master --- */
+
 static void sdhci_bus_class_init(ObjectClass *klass, void *data)
 {
     SDBusClass *sbc = SD_BUS_CLASS(klass);
-- 
2.7.4

[Qemu-devel] [PULL 14/24] sdhci: refactor common sysbus/pci class_init() into sdhci_common_class_init()

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Now both inherited classes appear as DEVICE_CATEGORY_STORAGE.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index c0b4b84..15d0961 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1273,6 +1273,15 @@ const VMStateDescription sdhci_vmstate = {
     },
 };
 
+static void sdhci_common_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+    dc->vmsd = &sdhci_vmstate;
+    dc->reset = sdhci_poweron_reset;
+}
+
 /* --- qdev PCI --- */
 
 static Property sdhci_pci_properties[] = {
@@ -1310,10 +1319,9 @@ static void sdhci_pci_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_SDHCI;
     k->class_id = PCI_CLASS_SYSTEM_SDHCI;
-    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
-    dc->vmsd = &sdhci_vmstate;
     dc->props = sdhci_pci_properties;
-    dc->reset = sdhci_poweron_reset;
+
+    sdhci_common_class_init(klass, data);
 }
 
 static const TypeInfo sdhci_pci_info = {
@@ -1366,10 +1374,10 @@ static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    dc->vmsd = &sdhci_vmstate;
     dc->props = sdhci_sysbus_properties;
     dc->realize = sdhci_sysbus_realize;
-    dc->reset = sdhci_poweron_reset;
+
+    sdhci_common_class_init(klass, data);
 }
 
 static const TypeInfo sdhci_sysbus_info = {
-- 
2.7.4

[Qemu-devel] [PULL 15/24] sdhci: refactor common sysbus/pci realize() into sdhci_common_realize()

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 15d0961..cf0c079 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1214,6 +1214,15 @@ static void sdhci_uninitfn(SDHCIState *s)
     s->fifo_buffer = NULL;
 }
 
+static void sdhci_common_realize(SDHCIState *s, Error **errp)
+{
+    s->buf_maxsz = sdhci_get_fifolen(s);
+    s->fifo_buffer = g_malloc0(s->buf_maxsz);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
+                          SDHC_REGISTERS_MAP_SIZE);
+}
+
 static bool sdhci_pending_insert_vmstate_needed(void *opaque)
 {
     SDHCIState *s = opaque;
@@ -1292,14 +1301,16 @@ static Property sdhci_pci_properties[] = {
 static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
 {
     SDHCIState *s = PCI_SDHCI(dev);
+
+    sdhci_initfn(s);
+    sdhci_common_realize(s, errp);
+    if (errp && *errp) {
+        return;
+    }
+
     dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
     dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
-    sdhci_initfn(s);
-    s->buf_maxsz = sdhci_get_fifolen(s);
-    s->fifo_buffer = g_malloc0(s->buf_maxsz);
     s->irq = pci_allocate_irq(dev);
-    memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
-            SDHC_REGISTERS_MAP_SIZE);
     pci_register_bar(dev, 0, 0, &s->iomem);
 }
 
@@ -1362,11 +1373,12 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
     SDHCIState *s = SYSBUS_SDHCI(dev);
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
-    s->buf_maxsz = sdhci_get_fifolen(s);
-    s->fifo_buffer = g_malloc0(s->buf_maxsz);
+    sdhci_common_realize(s, errp);
+    if (errp && *errp) {
+        return;
+    }
+
     sysbus_init_irq(sbd, &s->irq);
-    memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
-            SDHC_REGISTERS_MAP_SIZE);
     sysbus_init_mmio(sbd, &s->iomem);
 }
 
-- 
2.7.4

[Qemu-devel] [PULL 16/24] sdhci: refactor common sysbus/pci unrealize() into sdhci_common_unrealize()

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index cf0c079..bbe4570 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -32,6 +32,7 @@
 #include "qemu/bitops.h"
 #include "hw/sd/sdhci.h"
 #include "sdhci-internal.h"
+#include "qapi/error.h"
 #include "qemu/log.h"
 
 /* host controller debug messages */
@@ -1223,6 +1224,17 @@ static void sdhci_common_realize(SDHCIState *s, Error **errp)
                           SDHC_REGISTERS_MAP_SIZE);
 }
 
+static void sdhci_common_unrealize(SDHCIState *s, Error **errp)
+{
+    /* This function is expected to be called only once for each class:
+     * - SysBus:    via DeviceClass->unrealize(),
+     * - PCI:       via PCIDeviceClass->exit().
+     * However to avoid double-free and/or use-after-free we still nullify
+     * this variable (better safe than sorry!). */
+    g_free(s->fifo_buffer);
+    s->fifo_buffer = NULL;
+}
+
 static bool sdhci_pending_insert_vmstate_needed(void *opaque)
 {
     SDHCIState *s = opaque;
@@ -1317,6 +1329,8 @@ static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
 static void sdhci_pci_exit(PCIDevice *dev)
 {
     SDHCIState *s = PCI_SDHCI(dev);
+
+    sdhci_common_unrealize(s, &error_abort);
     sdhci_uninitfn(s);
 }
 
@@ -1382,12 +1396,20 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
     sysbus_init_mmio(sbd, &s->iomem);
 }
 
+static void sdhci_sysbus_unrealize(DeviceState *dev, Error **errp)
+{
+    SDHCIState *s = SYSBUS_SDHCI(dev);
+
+    sdhci_common_unrealize(s, &error_abort);
+}
+
 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     dc->props = sdhci_sysbus_properties;
     dc->realize = sdhci_sysbus_realize;
+    dc->unrealize = sdhci_sysbus_unrealize;
 
     sdhci_common_class_init(klass, data);
 }
-- 
2.7.4

[Qemu-devel] [PULL 17/24] sdhci: use qemu_log_mask(UNIMP) instead of fprintf()

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index bbe4570..7ffb1db 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -947,7 +947,8 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
         ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s);
         break;
     default:
-        ERRPRINT("bad %ub read: addr[0x%04x]\n", size, (int)offset);
+        qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " "
+                      "not implemented\n", size, offset);
         break;
     }
 
@@ -1153,8 +1154,8 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
         sdhci_update_irq(s);
         break;
     default:
-        ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n",
-                 size, (int)offset, value >> shift, value >> shift);
+        qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x "
+                      "not implemented\n", size, offset, value >> shift);
         break;
     }
     DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n",
-- 
2.7.4

[Qemu-devel] [PULL 18/24] sdhci: convert the DPRINT() calls into trace events

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

zero-initialize ADMADescr 'dscr' in sdhci_do_adma() to avoid:

  hw/sd/sdhci.c: In function ‘sdhci_do_adma’:
  hw/sd/sdhci.c:714:29: error: ‘dscr.addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
             trace_sdhci_adma("link", s->admasysaddr);
                             ^

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c      | 89 ++++++++++++++++++------------------------------------
 hw/sd/trace-events | 14 +++++++++
 2 files changed, 44 insertions(+), 59 deletions(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 7ffb1db..68f1aee 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -34,30 +34,7 @@
 #include "sdhci-internal.h"
 #include "qapi/error.h"
 #include "qemu/log.h"
-
-/* host controller debug messages */
-#ifndef SDHC_DEBUG
-#define SDHC_DEBUG                        0
-#endif
-
-#define DPRINT_L1(fmt, args...) \
-    do { \
-        if (SDHC_DEBUG) { \
-            fprintf(stderr, "QEMU SDHC: " fmt, ## args); \
-        } \
-    } while (0)
-#define DPRINT_L2(fmt, args...) \
-    do { \
-        if (SDHC_DEBUG > 1) { \
-            fprintf(stderr, "QEMU SDHC: " fmt, ## args); \
-        } \
-    } while (0)
-#define ERRPRINT(fmt, args...) \
-    do { \
-        if (SDHC_DEBUG) { \
-            fprintf(stderr, "QEMU SDHC ERROR: " fmt, ## args); \
-        } \
-    } while (0)
+#include "trace.h"
 
 #define TYPE_SDHCI_BUS "sdhci-bus"
 #define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS)
@@ -156,8 +133,8 @@ static void sdhci_raise_insertion_irq(void *opaque)
 static void sdhci_set_inserted(DeviceState *dev, bool level)
 {
     SDHCIState *s = (SDHCIState *)dev;
-    DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject");
 
+    trace_sdhci_set_inserted(level ? "insert" : "eject");
     if ((s->norintsts & SDHC_NIS_REMOVE) && level) {
         /* Give target some time to notice card ejection */
         timer_mod(s->insert_timer,
@@ -239,7 +216,8 @@ static void sdhci_send_command(SDHCIState *s)
     s->acmd12errsts = 0;
     request.cmd = s->cmdreg >> 8;
     request.arg = s->argument;
-    DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg);
+
+    trace_sdhci_send_command(request.cmd, request.arg);
     rlen = sdbus_do_command(&s->sdbus, &request, response);
 
     if (s->cmdreg & SDHC_CMD_RESPONSE) {
@@ -247,7 +225,7 @@ static void sdhci_send_command(SDHCIState *s)
             s->rspreg[0] = (response[0] << 24) | (response[1] << 16) |
                            (response[2] << 8)  |  response[3];
             s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
-            DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]);
+            trace_sdhci_response4(s->rspreg[0]);
         } else if (rlen == 16) {
             s->rspreg[0] = (response[11] << 24) | (response[12] << 16) |
                            (response[13] << 8) |  response[14];
@@ -257,11 +235,10 @@ static void sdhci_send_command(SDHCIState *s)
                            (response[5] << 8)  |  response[6];
             s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
                             response[2];
-            DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.."
-                  "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n",
-                  s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]);
+            trace_sdhci_response16(s->rspreg[3], s->rspreg[2],
+                                   s->rspreg[1], s->rspreg[0]);
         } else {
-            ERRPRINT("Timeout waiting for command response\n");
+            trace_sdhci_error("timeout waiting for command response");
             if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) {
                 s->errintsts |= SDHC_EIS_CMDTIMEOUT;
                 s->norintsts |= SDHC_NIS_ERR;
@@ -295,7 +272,7 @@ static void sdhci_end_transfer(SDHCIState *s)
 
         request.cmd = 0x0C;
         request.arg = 0;
-        DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg);
+        trace_sdhci_end_transfer(request.cmd, request.arg);
         sdbus_do_command(&s->sdbus, &request, response);
         /* Auto CMD12 response goes to the upper Response register */
         s->rspreg[3] = (response[0] << 24) | (response[1] << 16) |
@@ -364,7 +341,7 @@ static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
 
     /* first check that a valid data exists in host controller input buffer */
     if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) {
-        ERRPRINT("Trying to read from empty buffer\n");
+        trace_sdhci_error("read from empty buffer");
         return 0;
     }
 
@@ -373,8 +350,7 @@ static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
         s->data_count++;
         /* check if we've read all valid data (blksize bytes) from buffer */
         if ((s->data_count) >= (s->blksize & 0x0fff)) {
-            DPRINT_L2("All %u bytes of data have been read from input buffer\n",
-                    s->data_count);
+            trace_sdhci_read_dataport(s->data_count);
             s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
             s->data_count = 0;  /* next buff read must start at position [0] */
 
@@ -457,7 +433,7 @@ static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
 
     /* Check that there is free space left in a buffer */
     if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) {
-        ERRPRINT("Can't write to data buffer: buffer full\n");
+        trace_sdhci_error("Can't write to data buffer: buffer full");
         return;
     }
 
@@ -466,8 +442,7 @@ static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
         s->data_count++;
         value >>= 8;
         if (s->data_count >= (s->blksize & 0x0fff)) {
-            DPRINT_L2("write buffer filled with %u bytes of data\n",
-                    s->data_count);
+            trace_sdhci_write_dataport(s->data_count);
             s->data_count = 0;
             s->prnsts &= ~SDHC_SPACE_AVAILABLE;
             if (s->prnsts & SDHC_DOING_WRITE) {
@@ -655,15 +630,14 @@ static void sdhci_do_adma(SDHCIState *s)
 {
     unsigned int n, begin, length;
     const uint16_t block_size = s->blksize & 0x0fff;
-    ADMADescr dscr;
+    ADMADescr dscr = {};
     int i;
 
     for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) {
         s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH;
 
         get_adma_description(s, &dscr);
-        DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n",
-                dscr.addr, dscr.length, dscr.attr);
+        trace_sdhci_adma_loop(dscr.addr, dscr.length, dscr.attr);
 
         if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) {
             /* Indicate that error occurred in ST_FDS state */
@@ -746,8 +720,7 @@ static void sdhci_do_adma(SDHCIState *s)
             break;
         case SDHC_ADMA_ATTR_ACT_LINK:   /* link to next descriptor table */
             s->admasysaddr = dscr.addr;
-            DPRINT_L1("ADMA link: admasysaddr=0x%" PRIx64 "\n",
-                      s->admasysaddr);
+            trace_sdhci_adma("link", s->admasysaddr);
             break;
         default:
             s->admasysaddr += dscr.incr;
@@ -755,8 +728,7 @@ static void sdhci_do_adma(SDHCIState *s)
         }
 
         if (dscr.attr & SDHC_ADMA_ATTR_INT) {
-            DPRINT_L1("ADMA interrupt: admasysaddr=0x%" PRIx64 "\n",
-                      s->admasysaddr);
+            trace_sdhci_adma("interrupt", s->admasysaddr);
             if (s->norintstsen & SDHC_NISEN_DMA) {
                 s->norintsts |= SDHC_NIS_DMA;
             }
@@ -767,15 +739,15 @@ static void sdhci_do_adma(SDHCIState *s)
         /* ADMA transfer terminates if blkcnt == 0 or by END attribute */
         if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
                     (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) {
-            DPRINT_L2("ADMA transfer completed\n");
+            trace_sdhci_adma_transfer_completed();
             if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) &&
                 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
                 s->blkcnt != 0)) {
-                ERRPRINT("SD/MMC host ADMA length mismatch\n");
+                trace_sdhci_error("SD/MMC host ADMA length mismatch");
                 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH |
                         SDHC_ADMAERR_STATE_ST_TFR;
                 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
-                    ERRPRINT("Set ADMA error flag\n");
+                    trace_sdhci_error("Set ADMA error flag");
                     s->errintsts |= SDHC_EIS_ADMAERR;
                     s->norintsts |= SDHC_NIS_ERR;
                 }
@@ -811,7 +783,7 @@ static void sdhci_data_transfer(void *opaque)
             break;
         case SDHC_CTRL_ADMA1_32:
             if (!(s->capareg & SDHC_CAN_DO_ADMA1)) {
-                ERRPRINT("ADMA1 not supported\n");
+                trace_sdhci_error("ADMA1 not supported");
                 break;
             }
 
@@ -819,7 +791,7 @@ static void sdhci_data_transfer(void *opaque)
             break;
         case SDHC_CTRL_ADMA2_32:
             if (!(s->capareg & SDHC_CAN_DO_ADMA2)) {
-                ERRPRINT("ADMA2 not supported\n");
+                trace_sdhci_error("ADMA2 not supported");
                 break;
             }
 
@@ -828,14 +800,14 @@ static void sdhci_data_transfer(void *opaque)
         case SDHC_CTRL_ADMA2_64:
             if (!(s->capareg & SDHC_CAN_DO_ADMA2) ||
                     !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) {
-                ERRPRINT("64 bit ADMA not supported\n");
+                trace_sdhci_error("64 bit ADMA not supported");
                 break;
             }
 
             sdhci_do_adma(s);
             break;
         default:
-            ERRPRINT("Unsupported DMA type\n");
+            trace_sdhci_error("Unsupported DMA type");
             break;
         }
     } else {
@@ -870,8 +842,8 @@ static inline bool
 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num)
 {
     if ((s->data_count & 0x3) != byte_num) {
-        ERRPRINT("Non-sequential access to Buffer Data Port register"
-                "is prohibited\n");
+        trace_sdhci_error("Non-sequential access to Buffer Data Port register"
+                          "is prohibited\n");
         return false;
     }
     return true;
@@ -901,8 +873,7 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
     case  SDHC_BDATA:
         if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
             ret = sdhci_read_dataport(s, size);
-            DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset,
-                      ret, ret);
+            trace_sdhci_access("rd", size << 3, offset, "->", ret, ret);
             return ret;
         }
         break;
@@ -954,7 +925,7 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
 
     ret >>= (offset & 0x3) * 8;
     ret &= (1ULL << (size * 8)) - 1;
-    DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, ret, ret);
+    trace_sdhci_access("rd", size << 3, offset, "->", ret, ret);
     return ret;
 }
 
@@ -1158,8 +1129,8 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
                       "not implemented\n", size, offset, value >> shift);
         break;
     }
-    DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n",
-              size, (int)offset, value >> shift, value >> shift);
+    trace_sdhci_access("wr", size << 3, offset, "<-",
+                       value >> shift, value >> shift);
 }
 
 static const MemoryRegionOps sdhci_mmio_ops = {
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index 6eca347..0a12115 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -1,5 +1,19 @@
 # See docs/devel/tracing.txt for syntax documentation.
 
+# hw/sd/sdhci.c
+sdhci_set_inserted(const char *level) "card state changed: %s"
+sdhci_send_command(uint8_t cmd, uint32_t arg) "CMD%02u ARG[0x%08x]"
+sdhci_error(const char *msg) "%s"
+sdhci_response4(uint32_t r0) "RSPREG[31..0]=0x%08x"
+sdhci_response16(uint32_t r3, uint32_t r2, uint32_t r1, uint32_t r0) "RSPREG[127..96]=0x%08x, RSPREG[95..64]=0x%08x, RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x"
+sdhci_end_transfer(uint8_t cmd, uint32_t arg) "Automatically issue CMD%02u 0x%08x"
+sdhci_adma(const char *desc, uint32_t sysad) "%s: admasysaddr=0x%" PRIx32
+sdhci_adma_loop(uint64_t addr, uint16_t length, uint8_t attr) "addr=0x%08" PRIx64 ", len=%d, attr=0x%x"
+sdhci_adma_transfer_completed(void) ""
+sdhci_access(const char *access, unsigned int size, uint64_t offset, const char *dir, uint64_t val, uint64_t val2) "%s%u: addr[0x%04" PRIx64 "] %s 0x%08" PRIx64 " (%" PRIu64 ")"
+sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read from input buffer"
+sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data"
+
 # hw/sd/milkymist-memcard.c
 milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
-- 
2.7.4

[Qemu-devel] [PULL 19/24] sdhci: move MASK_TRNMOD with other SDHC_TRN* defines in "sd-internal.h"

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci-internal.h | 1 +
 hw/sd/sdhci.c          | 3 +--
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h
index 248fd02..e941bc2 100644
--- a/hw/sd/sdhci-internal.h
+++ b/hw/sd/sdhci-internal.h
@@ -43,6 +43,7 @@
 #define SDHC_TRNS_ACMD12               0x0004
 #define SDHC_TRNS_READ                 0x0010
 #define SDHC_TRNS_MULTI                0x0020
+#define SDHC_TRNMOD_MASK               0x0037
 
 /* R/W Command Register 0x0 */
 #define SDHC_CMDREG                    0x0E
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 68f1aee..4265b6a 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -99,7 +99,6 @@
     (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \
     (SDHC_CAPAB_TOCLKFREQ))
 
-#define MASK_TRNMOD     0x0037
 #define MASKED_WRITE(reg, mask, val)  (reg = (reg & (mask)) | (val))
 
 static uint8_t sdhci_slotint(SDHCIState *s)
@@ -1026,7 +1025,7 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
         if (!(s->capareg & SDHC_CAN_DO_DMA)) {
             value &= ~SDHC_TRNS_DMA;
         }
-        MASKED_WRITE(s->trnmod, mask, value & MASK_TRNMOD);
+        MASKED_WRITE(s->trnmod, mask, value & SDHC_TRNMOD_MASK);
         MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16);
 
         /* Writing to the upper byte of CMDREG triggers SD command generation */
-- 
2.7.4

[Qemu-devel] [PULL 20/24] sdhci: rename the SDHC_CAPAB register

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci-internal.h | 2 +-
 hw/sd/sdhci.c          | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h
index e941bc2..fc807f0 100644
--- a/hw/sd/sdhci-internal.h
+++ b/hw/sd/sdhci-internal.h
@@ -174,7 +174,7 @@
 #define SDHC_ACMD12ERRSTS              0x3C
 
 /* HWInit Capabilities Register 0x05E80080 */
-#define SDHC_CAPAREG                   0x40
+#define SDHC_CAPAB                     0x40
 #define SDHC_CAN_DO_DMA                0x00400000
 #define SDHC_CAN_DO_ADMA2              0x00080000
 #define SDHC_CAN_DO_ADMA1              0x00100000
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 4265b6a..c4e486e 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -898,7 +898,7 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
     case SDHC_ACMD12ERRSTS:
         ret = s->acmd12errsts;
         break;
-    case SDHC_CAPAREG:
+    case SDHC_CAPAB:
         ret = s->capareg;
         break;
     case SDHC_MAXCURR:
-- 
2.7.4

[Qemu-devel] [PULL 21/24] sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-only

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

running qtests:

  $ make check-qtest-arm
    GTESTER check-qtest-arm
  SDHC rd_4b @0x44 not implemented
  SDHC wr_4b @0x40 <- 0x89abcdef not implemented
  SDHC wr_4b @0x44 <- 0x01234567 not implemented

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-12-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/sd/sdhci.h |  4 ++--
 hw/sd/sdhci.c         | 23 +++++++++++++++++++----
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 8041c96..442e30a 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -72,8 +72,8 @@ typedef struct SDHCIState {
     uint64_t admasysaddr;  /* ADMA System Address Register */
 
     /* Read-only registers */
-    uint32_t capareg;      /* Capabilities Register */
-    uint32_t maxcurr;      /* Maximum Current Capabilities Register */
+    uint64_t capareg;      /* Capabilities Register */
+    uint64_t maxcurr;      /* Maximum Current Capabilities Register */
 
     uint8_t  *fifo_buffer; /* SD host i/o FIFO buffer */
     uint32_t buf_maxsz;
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index c4e486e..d4fcebc 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -899,10 +899,16 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
         ret = s->acmd12errsts;
         break;
     case SDHC_CAPAB:
-        ret = s->capareg;
+        ret = (uint32_t)s->capareg;
+        break;
+    case SDHC_CAPAB + 4:
+        ret = (uint32_t)(s->capareg >> 32);
         break;
     case SDHC_MAXCURR:
-        ret = s->maxcurr;
+        ret = (uint32_t)s->maxcurr;
+        break;
+    case SDHC_MAXCURR + 4:
+        ret = (uint32_t)(s->maxcurr >> 32);
         break;
     case SDHC_ADMAERR:
         ret =  s->admaerr;
@@ -1123,6 +1129,15 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
         }
         sdhci_update_irq(s);
         break;
+
+    case SDHC_CAPAB:
+    case SDHC_CAPAB + 4:
+    case SDHC_MAXCURR:
+    case SDHC_MAXCURR + 4:
+        qemu_log_mask(LOG_GUEST_ERROR, "SDHC wr_%ub @0x%02" HWADDR_PRIx
+                      " <- 0x%08x read-only\n", size, offset, value >> shift);
+        break;
+
     default:
         qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x "
                       "not implemented\n", size, offset, value >> shift);
@@ -1163,8 +1178,8 @@ static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
 #define DEFINE_SDHCI_COMMON_PROPERTIES(_state) \
     /* Capabilities registers provide information on supported features
      * of this specific host controller implementation */ \
-    DEFINE_PROP_UINT32("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \
-    DEFINE_PROP_UINT32("maxcurr", _state, maxcurr, 0)
+    DEFINE_PROP_UINT64("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \
+    DEFINE_PROP_UINT64("maxcurr", _state, maxcurr, 0)
 
 static void sdhci_initfn(SDHCIState *s)
 {
-- 
2.7.4

[Qemu-devel] [PULL 22/24] sdhci: Implement write method of ACMD12ERRSTS register

[Peter Maydell]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-13-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index d4fcebc..9bdbcd0 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1129,6 +1129,9 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
         }
         sdhci_update_irq(s);
         break;
+    case SDHC_ACMD12ERRSTS:
+        MASKED_WRITE(s->acmd12errsts, mask, value);
+        break;
 
     case SDHC_CAPAB:
     case SDHC_CAPAB + 4:
-- 
2.7.4

[Qemu-devel] [PULL 23/24] sdhci: fix the PCI device, using the PCI address space for DMA

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

While SysBus devices can use the get_system_memory() address space,
PCI devices should use the bus master address space for DMA.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180115182436.2066-14-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/sd/sdhci.h |  1 +
 hw/sd/sdhci.c         | 29 +++++++++++++++--------------
 2 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 442e30a..4a102b8 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -41,6 +41,7 @@ typedef struct SDHCIState {
     /*< public >*/
     SDBus sdbus;
     MemoryRegion iomem;
+    AddressSpace *dma_as;
 
     QEMUTimer *insert_timer;       /* timer for 'changing' sd card. */
     QEMUTimer *transfer_timer;
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 9bdbcd0..dd40069 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -496,7 +496,7 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
                     s->blkcnt--;
                 }
             }
-            dma_memory_write(&address_space_memory, s->sdmasysad,
+            dma_memory_write(s->dma_as, s->sdmasysad,
                              &s->fifo_buffer[begin], s->data_count - begin);
             s->sdmasysad += s->data_count - begin;
             if (s->data_count == block_size) {
@@ -518,7 +518,7 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
                 s->data_count = block_size;
                 boundary_count -= block_size - begin;
             }
-            dma_memory_read(&address_space_memory, s->sdmasysad,
+            dma_memory_read(s->dma_as, s->sdmasysad,
                             &s->fifo_buffer[begin], s->data_count - begin);
             s->sdmasysad += s->data_count - begin;
             if (s->data_count == block_size) {
@@ -556,11 +556,9 @@ static void sdhci_sdma_transfer_single_block(SDHCIState *s)
         for (n = 0; n < datacnt; n++) {
             s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
         }
-        dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer,
-                         datacnt);
+        dma_memory_write(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
     } else {
-        dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer,
-                        datacnt);
+        dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
         for (n = 0; n < datacnt; n++) {
             sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
         }
@@ -584,7 +582,7 @@ static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
     hwaddr entry_addr = (hwaddr)s->admasysaddr;
     switch (SDHC_DMA_TYPE(s->hostctl)) {
     case SDHC_CTRL_ADMA2_32:
-        dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2,
+        dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma2,
                         sizeof(adma2));
         adma2 = le64_to_cpu(adma2);
         /* The spec does not specify endianness of descriptor table.
@@ -596,7 +594,7 @@ static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
         dscr->incr = 8;
         break;
     case SDHC_CTRL_ADMA1_32:
-        dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1,
+        dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma1,
                         sizeof(adma1));
         adma1 = le32_to_cpu(adma1);
         dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
@@ -609,12 +607,12 @@ static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
         }
         break;
     case SDHC_CTRL_ADMA2_64:
-        dma_memory_read(&address_space_memory, entry_addr,
+        dma_memory_read(s->dma_as, entry_addr,
                         (uint8_t *)(&dscr->attr), 1);
-        dma_memory_read(&address_space_memory, entry_addr + 2,
+        dma_memory_read(s->dma_as, entry_addr + 2,
                         (uint8_t *)(&dscr->length), 2);
         dscr->length = le16_to_cpu(dscr->length);
-        dma_memory_read(&address_space_memory, entry_addr + 4,
+        dma_memory_read(s->dma_as, entry_addr + 4,
                         (uint8_t *)(&dscr->addr), 8);
         dscr->attr = le64_to_cpu(dscr->attr);
         dscr->attr &= 0xfffffff8;
@@ -673,7 +671,7 @@ static void sdhci_do_adma(SDHCIState *s)
                         s->data_count = block_size;
                         length -= block_size - begin;
                     }
-                    dma_memory_write(&address_space_memory, dscr.addr,
+                    dma_memory_write(s->dma_as, dscr.addr,
                                      &s->fifo_buffer[begin],
                                      s->data_count - begin);
                     dscr.addr += s->data_count - begin;
@@ -697,7 +695,7 @@ static void sdhci_do_adma(SDHCIState *s)
                         s->data_count = block_size;
                         length -= block_size - begin;
                     }
-                    dma_memory_read(&address_space_memory, dscr.addr,
+                    dma_memory_read(s->dma_as, dscr.addr,
                                     &s->fifo_buffer[begin],
                                     s->data_count - begin);
                     dscr.addr += s->data_count - begin;
@@ -1312,7 +1310,8 @@ static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
     dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
     dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
     s->irq = pci_allocate_irq(dev);
-    pci_register_bar(dev, 0, 0, &s->iomem);
+    s->dma_as = pci_get_address_space(dev);
+    pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->iomem);
 }
 
 static void sdhci_pci_exit(PCIDevice *dev)
@@ -1381,6 +1380,8 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
         return;
     }
 
+    s->dma_as = &address_space_memory;
+
     sysbus_init_irq(sbd, &s->irq);
     sysbus_init_mmio(sbd, &s->iomem);
 }
-- 
2.7.4

[Qemu-devel] [PULL 24/24] sdhci: add a 'dma' property to the sysbus devices

[Peter Maydell]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Add a 'dma' property allowing machine creation to provide the address-space
SDHCI DMA operates on.

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
 from qemu/xilinx tag xilinx-v2016.1]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180115182436.2066-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/sd/sdhci.h |  1 +
 hw/sd/sdhci.c         | 18 +++++++++++++++++-
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 4a102b8..cb37182 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -42,6 +42,7 @@ typedef struct SDHCIState {
     SDBus sdbus;
     MemoryRegion iomem;
     AddressSpace *dma_as;
+    MemoryRegion *dma_mr;
 
     QEMUTimer *insert_timer;       /* timer for 'changing' sd card. */
     QEMUTimer *transfer_timer;
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index dd40069..f9264d3 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1354,6 +1354,8 @@ static Property sdhci_sysbus_properties[] = {
     DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
     DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
                      false),
+    DEFINE_PROP_LINK("dma", SDHCIState,
+                     dma_mr, TYPE_MEMORY_REGION, MemoryRegion *),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -1367,6 +1369,11 @@ static void sdhci_sysbus_init(Object *obj)
 static void sdhci_sysbus_finalize(Object *obj)
 {
     SDHCIState *s = SYSBUS_SDHCI(obj);
+
+    if (s->dma_mr) {
+        object_unparent(OBJECT(s->dma_mr));
+    }
+
     sdhci_uninitfn(s);
 }
 
@@ -1380,7 +1387,12 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
         return;
     }
 
-    s->dma_as = &address_space_memory;
+    if (s->dma_mr) {
+        address_space_init(s->dma_as, s->dma_mr, "sdhci-dma");
+    } else {
+        /* use system_memory() if property "dma" not set */
+        s->dma_as = &address_space_memory;
+    }
 
     sysbus_init_irq(sbd, &s->irq);
     sysbus_init_mmio(sbd, &s->iomem);
@@ -1391,6 +1403,10 @@ static void sdhci_sysbus_unrealize(DeviceState *dev, Error **errp)
     SDHCIState *s = SYSBUS_SDHCI(dev);
 
     sdhci_common_unrealize(s, &error_abort);
+
+     if (s->dma_mr) {
+        address_space_destroy(s->dma_as);
+    }
 }
 
 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
-- 
2.7.4

Re: [Qemu-devel] [PULL 00/24] target-arm queue

[Peter Maydell]

On 16 January 2018 at 13:33, Peter Maydell <peter.maydell@linaro.org> wrote:
> More arm patches (mostly the SDHCI ones from Philippe)
>
> thanks
> -- PMM
>
> The following changes since commit f521eeee3bd060b460c99e605472b7e03967db43:
>
>   Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180115' into staging (2018-01-15 13:17:47 +0000)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180116
>
> for you to fetch changes up to 60765b6ceeb4998a0d4220b3a53f1f185061da77:
>
>   sdhci: add a 'dma' property to the sysbus devices (2018-01-16 13:28:21 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * SDHCI: cleanups and minor bug fixes
>  * target/arm: minor refactor preparatory to fp16 support
>  * omap_ssd, ssi-sd, pl181, milkymist-memcard: reset the SD
>    card on controller reset (fixes migration failures)
>  * target/arm: Handle page table walk load failures correctly
>  * hw/arm/virt: Add virt-2.12 machine type
>  * get_phys_addr_pmsav7: Support AP=0b111 for v7M
>  * hw/intc/armv7m: Support byte and halfword accesses to CFSR
>

Applied, thanks.

-- PMM