From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Subject: [Qemu-devel] [PULL 46/51] find_ram_offset: Add comments and tracing
Date: Tue, 16 Jan 2018 15:17:28 +0100 [thread overview]
Message-ID: <1516112253-14480-47-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1516112253-14480-1-git-send-email-pbonzini@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Add some comments so I can understand the various nested loops.
Add some tracing so I can see what they're doing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180105170138.23357-2-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
exec.c | 29 ++++++++++++++++++++++-------
trace-events | 4 ++++
2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/exec.c b/exec.c
index 4722e52..5e2fb55 100644
--- a/exec.c
+++ b/exec.c
@@ -1660,7 +1660,10 @@ static void *file_ram_alloc(RAMBlock *block,
}
#endif
-/* Called with the ramlist lock held. */
+/* Allocate space within the ram_addr_t space that governs the
+ * dirty bitmaps.
+ * Called with the ramlist lock held.
+ */
static ram_addr_t find_ram_offset(ram_addr_t size)
{
RAMBlock *block, *next_block;
@@ -1673,19 +1676,29 @@ static ram_addr_t find_ram_offset(ram_addr_t size)
}
RAMBLOCK_FOREACH(block) {
- ram_addr_t end, next = RAM_ADDR_MAX;
+ ram_addr_t candidate, next = RAM_ADDR_MAX;
- end = block->offset + block->max_length;
+ candidate = block->offset + block->max_length;
+ /* Search for the closest following block
+ * and find the gap.
+ */
RAMBLOCK_FOREACH(next_block) {
- if (next_block->offset >= end) {
+ if (next_block->offset >= candidate) {
next = MIN(next, next_block->offset);
}
}
- if (next - end >= size && next - end < mingap) {
- offset = end;
- mingap = next - end;
+
+ /* If it fits remember our place and remember the size
+ * of gap, but keep going so that we might find a smaller
+ * gap to fill so avoiding fragmentation.
+ */
+ if (next - candidate >= size && next - candidate < mingap) {
+ offset = candidate;
+ mingap = next - candidate;
}
+
+ trace_find_ram_offset_loop(size, candidate, offset, next, mingap);
}
if (offset == RAM_ADDR_MAX) {
@@ -1694,6 +1707,8 @@ static ram_addr_t find_ram_offset(ram_addr_t size)
abort();
}
+ trace_find_ram_offset(size, offset);
+
return offset;
}
diff --git a/trace-events b/trace-events
index 3695959..ec95e67 100644
--- a/trace-events
+++ b/trace-events
@@ -55,6 +55,10 @@ dma_complete(void *dbs, int ret, void *cb) "dbs=%p ret=%d cb=%p"
dma_blk_cb(void *dbs, int ret) "dbs=%p ret=%d"
dma_map_wait(void *dbs) "dbs=%p"
+# # exec.c
+find_ram_offset(uint64_t size, uint64_t offset) "size: 0x%" PRIx64 " @ 0x%" PRIx64
+find_ram_offset_loop(uint64_t size, uint64_t candidate, uint64_t offset, uint64_t next, uint64_t mingap) "trying size: 0x%" PRIx64 " @ 0x%" PRIx64 ", offset: 0x%" PRIx64" next: 0x%" PRIx64 " mingap: 0x%" PRIx64
+
# memory.c
memory_region_ops_read(int cpu_index, void *mr, uint64_t addr, uint64_t value, unsigned size) "cpu %d mr %p addr 0x%"PRIx64" value 0x%"PRIx64" size %u"
memory_region_ops_write(int cpu_index, void *mr, uint64_t addr, uint64_t value, unsigned size) "cpu %d mr %p addr 0x%"PRIx64" value 0x%"PRIx64" size %u"
--
1.8.3.1
next prev parent reply other threads:[~2018-01-16 14:18 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-16 14:16 [Qemu-devel] [PULL v4 00/51] Misc patches for 2018-01-12 Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 01/51] scsi-generic: Add share-rw option Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 02/51] scsi: fix scsi_convert_sense crash when in_buf == NULL && in_len == 0 Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 03/51] pc: fail memory hot-plug/unplug with -no-acpi and Q35 machine type Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 04/51] hpet: recover timer offset correctly Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 05/51] i386/cpu/kvm: look at PMU's CPUID before setting MSRs Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 06/51] chardev: use backend chr context when watch for fe Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 07/51] chardev: let g_idle_add() be with chardev gcontext Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 08/51] chardev: introduce qemu_chr_timeout_add_ms() Paolo Bonzini
2018-01-16 14:43 ` Daniel P. Berrange
2018-01-16 15:07 ` Paolo Bonzini
2018-01-17 16:21 ` Marc-André Lureau
2018-01-18 5:00 ` Peter Xu
2018-01-16 14:16 ` [Qemu-devel] [PULL 09/51] build-sys: fix qemu-ga -pthread linking Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 10/51] build-sys: silence make by default or V=0 Paolo Bonzini
2018-01-23 15:38 ` Daniel P. Berrange
2018-01-23 16:08 ` Marc-Andre Lureau
2018-01-23 17:05 ` Daniel P. Berrange
2018-01-16 14:16 ` [Qemu-devel] [PULL 11/51] build-sys: add a rule to print a variable Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 12/51] build-sys: compile with -Og or -O1 when --enable-debug Paolo Bonzini
2018-03-02 18:48 ` Peter Maydell
2018-03-02 21:04 ` Alex Bennée
2018-03-06 10:33 ` Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 13/51] tests/docker: add some sanitizers to fedora dockerfile Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 14/51] tests/docker: add test-debug Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 15/51] tests: fix check-qobject leak Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 16/51] vl: fix direct firmware directories leak Paolo Bonzini
2018-01-16 14:16 ` [Qemu-devel] [PULL 17/51] readline: add a free function Paolo Bonzini
2018-02-02 0:00 ` Alex Williamson
2018-02-02 0:10 ` Paolo Bonzini
2018-02-02 9:05 ` Greg Kurz
2018-01-16 14:17 ` [Qemu-devel] [PULL 18/51] tests: fix migration-test leak Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 19/51] crypto: fix stack-buffer-overflow error Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 20/51] qemu-config: fix leak in query-command-line-options Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 21/51] tests: fix qmp-test leak Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 22/51] tests: fix coroutine leak in /basic/entered Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 23/51] mips: fix potential fopen(NULL,...) Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 24/51] disas/s390: fix global-buffer-overflow Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 25/51] scsi-disk: release AioContext in unaligned WRITE SAME case Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 26/51] tests/boot-serial-test: Add tests for microblaze boards Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 27/51] tests/boot-serial-test: Add a test for the moxiesim machine Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 28/51] tests/boot-serial-test: Add support for the raspi2 machine Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 29/51] target/i386: move hflags update code to a function Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 30/51] target/i386: hax: change to use x86_update_hflags Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 31/51] target/i386: hax: Move x86_update_hflags Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 32/51] target-i386: update hflags on Hypervisor.framework Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 33/51] scripts/qemu-gdb: add simple tcg lock status helper Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 34/51] scripts/qemu-gdb/timers.py: new helper to dump timer state Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 35/51] icount: fixed saving/restoring of icount warp timers Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 36/51] cpus: unify qemu_*_wait_io_event Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 37/51] irq: fix memory leak Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 38/51] net: Drop unusual use of do { } while (0); Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 39/51] mips: Tweak location of ';' in macros Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 40/51] chardev: Use goto/label instead of do/break/while(0) Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 41/51] chardev: Clean up previous patch indentation Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 42/51] tests: Avoid 'do/while(false); ' in vhost-user-bridge Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 43/51] maint: Fix macros with broken 'do/while(0); ' usage Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 44/51] checkpatch: Enforce proper do/while (0) style Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 45/51] cpu_physical_memory_sync_dirty_bitmap: Another alignment fix Paolo Bonzini
2018-01-16 14:17 ` Paolo Bonzini [this message]
2018-01-16 14:17 ` [Qemu-devel] [PULL 47/51] find_ram_offset: Align ram_addr_t allocation on long boundaries Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 48/51] block/iscsi: fix initialization of iTask in iscsi_co_get_block_status Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 49/51] cpu: flush TB cache when loading VMState Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 50/51] util/qemu-thread-*: add qemu_lock, locked and unlock trace events Paolo Bonzini
2018-01-16 14:17 ` [Qemu-devel] [PULL 51/51] scripts/analyse-locks-simpletrace.py: script to analyse lock times Paolo Bonzini
2018-01-16 15:30 ` [Qemu-devel] [PULL v4 00/51] Misc patches for 2018-01-12 no-reply
2018-01-16 17:36 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516112253-14480-47-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).