From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
Igor Mammedov <imammedo@redhat.com>
Subject: [Qemu-devel] [PULL v2 22/34] vhost: Simplify ring verification checks
Date: Tue, 16 Jan 2018 19:51:54 +0200 [thread overview]
Message-ID: <1516121887-32738-23-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1516121887-32738-1-git-send-email-mst@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
vhost_verify_ring_mappings() were used to verify that
rings are still accessible and related memory hasn't
been moved after flatview is updated.
It was doing checks by mapping ring's GPA+len and
checking that HVA hadn't changed with new memory map.
To avoid maybe expensive mapping call, we were
identifying address range that changed and were doing
mapping only if ring was in changed range.
However it's not neccessary to perform ring's GPA
mapping as we already have its current HVA and all
we need is to verify that ring's GPA translates to
the same HVA in updated flatview.
This will allow the following patches to simplify the range
comparison that was previously needed to avoid expensive
verify_ring_mapping calls.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
with modifications by:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
---
hw/virtio/vhost.c | 79 ++++++++++++++++++++++++++++++-------------------------
1 file changed, 43 insertions(+), 36 deletions(-)
diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 8a85dde..8fdd073 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -449,35 +449,37 @@ static void vhost_memory_unmap(struct vhost_dev *dev, void *buffer,
}
}
-static int vhost_verify_ring_part_mapping(struct vhost_dev *dev,
- void *part,
- uint64_t part_addr,
- uint64_t part_size,
- uint64_t start_addr,
- uint64_t size)
-{
- hwaddr l;
- void *p;
- int r = 0;
-
- if (!ranges_overlap(start_addr, size, part_addr, part_size)) {
+static int vhost_verify_ring_part_mapping(void *ring_hva,
+ uint64_t ring_gpa,
+ uint64_t ring_size,
+ void *reg_hva,
+ uint64_t reg_gpa,
+ uint64_t reg_size)
+{
+ uint64_t hva_ring_offset;
+ uint64_t ring_last = range_get_last(ring_gpa, ring_size);
+ uint64_t reg_last = range_get_last(reg_gpa, reg_size);
+
+ if (ring_last < reg_gpa || ring_gpa > reg_last) {
return 0;
}
- l = part_size;
- p = vhost_memory_map(dev, part_addr, &l, 1);
- if (!p || l != part_size) {
- r = -ENOMEM;
+ /* check that whole ring's is mapped */
+ if (ring_last > reg_last) {
+ return -ENOMEM;
}
- if (p != part) {
- r = -EBUSY;
+ /* check that ring's MemoryRegion wasn't replaced */
+ hva_ring_offset = ring_gpa - reg_gpa;
+ if (ring_hva != reg_hva + hva_ring_offset) {
+ return -EBUSY;
}
- vhost_memory_unmap(dev, p, l, 0, 0);
- return r;
+
+ return 0;
}
static int vhost_verify_ring_mappings(struct vhost_dev *dev,
- uint64_t start_addr,
- uint64_t size)
+ void *reg_hva,
+ uint64_t reg_gpa,
+ uint64_t reg_size)
{
int i, j;
int r = 0;
@@ -491,22 +493,25 @@ static int vhost_verify_ring_mappings(struct vhost_dev *dev,
struct vhost_virtqueue *vq = dev->vqs + i;
j = 0;
- r = vhost_verify_ring_part_mapping(dev, vq->desc, vq->desc_phys,
- vq->desc_size, start_addr, size);
+ r = vhost_verify_ring_part_mapping(
+ vq->desc, vq->desc_phys, vq->desc_size,
+ reg_hva, reg_gpa, reg_size);
if (r) {
break;
}
j++;
- r = vhost_verify_ring_part_mapping(dev, vq->avail, vq->avail_phys,
- vq->avail_size, start_addr, size);
+ r = vhost_verify_ring_part_mapping(
+ vq->desc, vq->desc_phys, vq->desc_size,
+ reg_hva, reg_gpa, reg_size);
if (r) {
break;
}
j++;
- r = vhost_verify_ring_part_mapping(dev, vq->used, vq->used_phys,
- vq->used_size, start_addr, size);
+ r = vhost_verify_ring_part_mapping(
+ vq->desc, vq->desc_phys, vq->desc_size,
+ reg_hva, reg_gpa, reg_size);
if (r) {
break;
}
@@ -629,13 +634,11 @@ static void vhost_commit(MemoryListener *listener)
{
struct vhost_dev *dev = container_of(listener, struct vhost_dev,
memory_listener);
- hwaddr start_addr = 0;
- ram_addr_t size = 0;
MemoryRegionSection *old_sections;
int n_old_sections;
-
uint64_t log_size;
int r;
+ int i;
old_sections = dev->mem_sections;
n_old_sections = dev->n_mem_sections;
@@ -652,12 +655,16 @@ static void vhost_commit(MemoryListener *listener)
goto out;
}
- if (dev->started) {
- start_addr = dev->mem_changed_start_addr;
- size = dev->mem_changed_end_addr - dev->mem_changed_start_addr + 1;
+ for (i = 0; i < dev->mem->nregions; i++) {
+ struct vhost_memory_region *reg = dev->mem->regions + i;
- r = vhost_verify_ring_mappings(dev, start_addr, size);
- assert(r >= 0);
+ if (vhost_verify_ring_mappings(dev,
+ (void *)(uintptr_t)reg->userspace_addr,
+ reg->guest_phys_addr,
+ reg->memory_size)) {
+ error_report("Verify ring failure on region %d", i);
+ abort();
+ }
}
if (!dev->log_enabled) {
--
MST
next prev parent reply other threads:[~2018-01-16 17:52 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-16 17:46 [Qemu-devel] [PULL v2 00/34] pc, pci, virtio: features, fixes, cleanups Michael S. Tsirkin
2018-01-16 17:46 ` [Qemu-devel] [PULL v2 01/34] MAINTAINERS: Add myself as maintainer to X86 machines Michael S. Tsirkin
2018-01-16 17:47 ` [Qemu-devel] [PULL v2 02/34] vhost-user: add new vhost user messages to support virtio config space Michael S. Tsirkin
2018-01-16 17:47 ` [Qemu-devel] [PULL v2 03/34] vhost-user-blk: introduce a new vhost-user-blk host device Michael S. Tsirkin
2018-01-16 17:48 ` [Qemu-devel] [PULL v2 04/34] contrib/libvhost-user: enable virtio config space messages Michael S. Tsirkin
2018-01-16 17:48 ` [Qemu-devel] [PULL v2 05/34] contrib/vhost-user-blk: introduce a vhost-user-blk sample application Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 06/34] qemu: add a cleanup callback function to EventNotifier Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 07/34] virtio: postpone the execution of event_notifier_cleanup function Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 08/34] virtio: improve virtio devices initialization time Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 09/34] pci/shpc: Move function to generic header file Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 10/34] vhost-user: fix multiple queue specification Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 11/34] intel-iommu: Redefine macros to enable supporting 48 bit address width Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 12/34] intel-iommu: Extend address width to 48 bits Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 13/34] hw/pci-bridge: fix QEMU crash because of pcie-root-port Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 14/34] ACPI/unit-test: Add a testcase for RAM allocation in numa node Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 15/34] hw/acpi-build: Make next_base easy to follow Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 16/34] vhost-user-test: fix features mask Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 17/34] vhost-user-test: extract read-guest-mem test from main loop Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 18/34] vhost-user-test: setup virtqueues in all tests Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 19/34] vhost-user-test: make features mask an init_virtio_dev() argument Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 20/34] vhost-user-test: use init_virtio_dev in multiqueue test Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 21/34] vhost: Build temporary section list and deref after commit Michael S. Tsirkin
2018-01-16 17:51 ` Michael S. Tsirkin [this message]
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 23/34] vhost: Merge sections added to temporary list Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 24/34] x86_iommu: Move machine check to x86_iommu_realize() Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 25/34] x86_iommu: check if machine has PCI bus Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 26/34] tests: acpi: move tested tables array allocation outside of test_acpi_dsdt_table() Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 27/34] tests: acpi: init table descriptor in test_dst_table() Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 28/34] tests: acpi: rename test_acpi_tables()/test_dst_table() to reflect its usage Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 29/34] tests: acpi: add comments to fetch_rsdt_referenced_tables/data->tables usage Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 30/34] vhost-user: factor out msg head and payload Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 31/34] vhost-user: fix misaligned access to payload Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 32/34] vhost: remove assertion to prevent crash Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 33/34] vhost: fix memslot limit check Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 34/34] vhost: used_memslots refactoring Michael S. Tsirkin
2018-01-18 10:09 ` [Qemu-devel] [PULL v2 00/34] pc, pci, virtio: features, fixes, cleanups Peter Maydell
2018-01-18 19:30 ` Michael S. Tsirkin
2018-01-19 10:13 ` Peter Maydell
2018-01-18 20:48 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516121887-32738-23-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=dgilbert@redhat.com \
--cc=imammedo@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).