From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Gal Hammer <ghammer@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
kvm@vger.kernel.org
Subject: [Qemu-devel] [PULL v2 07/34] virtio: postpone the execution of event_notifier_cleanup function
Date: Tue, 16 Jan 2018 19:49:17 +0200 [thread overview]
Message-ID: <1516121887-32738-8-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1516121887-32738-1-git-send-email-mst@redhat.com>
From: Gal Hammer <ghammer@redhat.com>
Use the EventNotifier's cleanup callback function to execute the
event_notifier_cleanup function after kvm unregistered the eventfd.
This change supports running the virtio_bus_set_host_notifier
function inside a memory region transaction. Otherwise, a closed
fd is sent to kvm, which results in a failure.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
accel/kvm/kvm-all.c | 4 ++++
hw/virtio/virtio-bus.c | 19 +++++++++++--------
2 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
index f290f48..071f4f5 100644
--- a/accel/kvm/kvm-all.c
+++ b/accel/kvm/kvm-all.c
@@ -812,6 +812,10 @@ static void kvm_mem_ioeventfd_del(MemoryListener *listener,
if (r < 0) {
abort();
}
+
+ if (e->cleanup) {
+ e->cleanup(e);
+ }
}
static void kvm_io_ioeventfd_add(MemoryListener *listener,
diff --git a/hw/virtio/virtio-bus.c b/hw/virtio/virtio-bus.c
index 3042232..8106346 100644
--- a/hw/virtio/virtio-bus.c
+++ b/hw/virtio/virtio-bus.c
@@ -256,6 +256,15 @@ bool virtio_bus_ioeventfd_enabled(VirtioBusState *bus)
return k->ioeventfd_assign && k->ioeventfd_enabled(proxy);
}
+static void virtio_bus_cleanup_event_notifier(EventNotifier *notifier)
+{
+ /* Test and clear notifier after disabling event,
+ * in case poll callback didn't have time to run.
+ */
+ virtio_queue_host_notifier_read(notifier);
+ event_notifier_cleanup(notifier);
+}
+
/*
* This function switches ioeventfd on/off in the device.
* The caller must set or clear the handlers for the EventNotifier.
@@ -283,19 +292,13 @@ int virtio_bus_set_host_notifier(VirtioBusState *bus, int n, bool assign)
r = k->ioeventfd_assign(proxy, notifier, n, true);
if (r < 0) {
error_report("%s: unable to assign ioeventfd: %d", __func__, r);
- goto cleanup_event_notifier;
+ virtio_bus_cleanup_event_notifier(notifier);
}
- return 0;
} else {
+ notifier->cleanup = virtio_bus_cleanup_event_notifier;
k->ioeventfd_assign(proxy, notifier, n, false);
}
-cleanup_event_notifier:
- /* Test and clear notifier after disabling event,
- * in case poll callback didn't have time to run.
- */
- virtio_queue_host_notifier_read(notifier);
- event_notifier_cleanup(notifier);
return r;
}
--
MST
next prev parent reply other threads:[~2018-01-16 17:49 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-16 17:46 [Qemu-devel] [PULL v2 00/34] pc, pci, virtio: features, fixes, cleanups Michael S. Tsirkin
2018-01-16 17:46 ` [Qemu-devel] [PULL v2 01/34] MAINTAINERS: Add myself as maintainer to X86 machines Michael S. Tsirkin
2018-01-16 17:47 ` [Qemu-devel] [PULL v2 02/34] vhost-user: add new vhost user messages to support virtio config space Michael S. Tsirkin
2018-01-16 17:47 ` [Qemu-devel] [PULL v2 03/34] vhost-user-blk: introduce a new vhost-user-blk host device Michael S. Tsirkin
2018-01-16 17:48 ` [Qemu-devel] [PULL v2 04/34] contrib/libvhost-user: enable virtio config space messages Michael S. Tsirkin
2018-01-16 17:48 ` [Qemu-devel] [PULL v2 05/34] contrib/vhost-user-blk: introduce a vhost-user-blk sample application Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 06/34] qemu: add a cleanup callback function to EventNotifier Michael S. Tsirkin
2018-01-16 17:49 ` Michael S. Tsirkin [this message]
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 08/34] virtio: improve virtio devices initialization time Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 09/34] pci/shpc: Move function to generic header file Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 10/34] vhost-user: fix multiple queue specification Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 11/34] intel-iommu: Redefine macros to enable supporting 48 bit address width Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 12/34] intel-iommu: Extend address width to 48 bits Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 13/34] hw/pci-bridge: fix QEMU crash because of pcie-root-port Michael S. Tsirkin
2018-01-16 17:49 ` [Qemu-devel] [PULL v2 14/34] ACPI/unit-test: Add a testcase for RAM allocation in numa node Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 15/34] hw/acpi-build: Make next_base easy to follow Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 16/34] vhost-user-test: fix features mask Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 17/34] vhost-user-test: extract read-guest-mem test from main loop Michael S. Tsirkin
2018-01-16 17:50 ` [Qemu-devel] [PULL v2 18/34] vhost-user-test: setup virtqueues in all tests Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 19/34] vhost-user-test: make features mask an init_virtio_dev() argument Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 20/34] vhost-user-test: use init_virtio_dev in multiqueue test Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 21/34] vhost: Build temporary section list and deref after commit Michael S. Tsirkin
2018-01-16 17:51 ` [Qemu-devel] [PULL v2 22/34] vhost: Simplify ring verification checks Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 23/34] vhost: Merge sections added to temporary list Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 24/34] x86_iommu: Move machine check to x86_iommu_realize() Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 25/34] x86_iommu: check if machine has PCI bus Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 26/34] tests: acpi: move tested tables array allocation outside of test_acpi_dsdt_table() Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 27/34] tests: acpi: init table descriptor in test_dst_table() Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 28/34] tests: acpi: rename test_acpi_tables()/test_dst_table() to reflect its usage Michael S. Tsirkin
2018-01-16 17:52 ` [Qemu-devel] [PULL v2 29/34] tests: acpi: add comments to fetch_rsdt_referenced_tables/data->tables usage Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 30/34] vhost-user: factor out msg head and payload Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 31/34] vhost-user: fix misaligned access to payload Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 32/34] vhost: remove assertion to prevent crash Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 33/34] vhost: fix memslot limit check Michael S. Tsirkin
2018-01-16 17:53 ` [Qemu-devel] [PULL v2 34/34] vhost: used_memslots refactoring Michael S. Tsirkin
2018-01-18 10:09 ` [Qemu-devel] [PULL v2 00/34] pc, pci, virtio: features, fixes, cleanups Peter Maydell
2018-01-18 19:30 ` Michael S. Tsirkin
2018-01-19 10:13 ` Peter Maydell
2018-01-18 20:48 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516121887-32738-8-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=ghammer@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).