qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Anton Nefedov <anton.nefedov@virtuozzo.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, mreitz@redhat.com,
	eblake@redhat.com, den@virtuozzo.com, berto@igalia.com,
	Anton Nefedov <anton.nefedov@virtuozzo.com>
Subject: [Qemu-devel] [PATCH v7 3/9] block: introduce BDRV_REQ_ALLOCATE flag
Date: Thu, 18 Jan 2018 20:49:01 +0300	[thread overview]
Message-ID: <1516297747-107232-4-git-send-email-anton.nefedov@virtuozzo.com> (raw)
In-Reply-To: <1516297747-107232-1-git-send-email-anton.nefedov@virtuozzo.com>

The flag is supposed to indicate that the region of the disk image has
to be sufficiently allocated so it reads as zeroes.

The call with the flag set must return -ENOTSUP if allocation cannot
be done efficiently.
This has to be made sure of by both
  - the drivers that support the flag
  - and the common block layer (so it will not fall back to any slowpath
    (like writing zero buffers) in case the driver does not support
    the flag).

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
---
 include/block/block.h     |  6 +++++-
 include/block/block_int.h |  2 +-
 block/io.c                | 20 +++++++++++++++++---
 3 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/include/block/block.h b/include/block/block.h
index 9b12774..3e31b89 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -65,9 +65,13 @@ typedef enum {
     BDRV_REQ_NO_SERIALISING     = 0x8,
     BDRV_REQ_FUA                = 0x10,
     BDRV_REQ_WRITE_COMPRESSED   = 0x20,
+    /* The BDRV_REQ_ALLOCATE flag is used to indicate that the driver has to
+     * efficiently allocate the space so it reads as zeroes, or return an error.
+     */
+    BDRV_REQ_ALLOCATE           = 0x40,
 
     /* Mask of valid flags */
-    BDRV_REQ_MASK               = 0x3f,
+    BDRV_REQ_MASK               = 0x7f,
 } BdrvRequestFlags;
 
 typedef struct BlockSizes {
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 29cafa4..b141710 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -632,7 +632,7 @@ struct BlockDriverState {
     /* Flags honored during pwrite (so far: BDRV_REQ_FUA) */
     unsigned int supported_write_flags;
     /* Flags honored during pwrite_zeroes (so far: BDRV_REQ_FUA,
-     * BDRV_REQ_MAY_UNMAP) */
+     * BDRV_REQ_MAY_UNMAP, BDRV_REQ_ALLOCATE) */
     unsigned int supported_zero_flags;
 
     /* the following member gives a name to every node on the bs graph. */
diff --git a/block/io.c b/block/io.c
index 7ea4023..cf2f84c 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1424,7 +1424,7 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
             assert(!bs->supported_zero_flags);
         }
 
-        if (ret == -ENOTSUP) {
+        if (ret == -ENOTSUP && !(flags & BDRV_REQ_ALLOCATE)) {
             /* Fall back to bounce buffer if write zeroes is unsupported */
             BdrvRequestFlags write_flags = flags & ~BDRV_REQ_ZERO_WRITE;
 
@@ -1514,8 +1514,8 @@ static int coroutine_fn bdrv_aligned_pwritev(BdrvChild *child,
     ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
 
     if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
-        !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_pwrite_zeroes &&
-        qemu_iovec_is_zero(qiov)) {
+        !(flags & BDRV_REQ_ZERO_WRITE) && !(flags & BDRV_REQ_ALLOCATE) &&
+        drv->bdrv_co_pwrite_zeroes && qemu_iovec_is_zero(qiov)) {
         flags |= BDRV_REQ_ZERO_WRITE;
         if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
             flags |= BDRV_REQ_MAY_UNMAP;
@@ -1593,6 +1593,9 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child,
 
     assert(flags & BDRV_REQ_ZERO_WRITE);
     if (head_padding_bytes || tail_padding_bytes) {
+        if (flags & BDRV_REQ_ALLOCATE) {
+            return -ENOTSUP;
+        }
         buf = qemu_blockalign(bs, align);
         iov = (struct iovec) {
             .iov_base   = buf,
@@ -1693,6 +1696,9 @@ int coroutine_fn bdrv_co_pwritev(BdrvChild *child,
         return ret;
     }
 
+    /* allocation request with qiov provided doesn't make much sense */
+    assert(!(qiov && (flags & BDRV_REQ_ALLOCATE)));
+
     bdrv_inc_in_flight(bs);
     /*
      * Align write if necessary by performing a read-modify-write cycle.
@@ -1822,6 +1828,14 @@ int coroutine_fn bdrv_co_pwrite_zeroes(BdrvChild *child, int64_t offset,
 {
     trace_bdrv_co_pwrite_zeroes(child->bs, offset, bytes, flags);
 
+    assert(!((flags & BDRV_REQ_MAY_UNMAP) && (flags & BDRV_REQ_ALLOCATE)));
+
+    if ((flags & BDRV_REQ_ALLOCATE) &&
+        !(child->bs->supported_zero_flags & BDRV_REQ_ALLOCATE))
+    {
+        return -ENOTSUP;
+    }
+
     if (!(child->bs->open_flags & BDRV_O_UNMAP)) {
         flags &= ~BDRV_REQ_MAY_UNMAP;
     }
-- 
2.7.4

  parent reply	other threads:[~2018-01-18 17:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-18 17:48 [Qemu-devel] [PATCH v7 0/9] qcow2: cluster space preallocation Anton Nefedov
2018-01-18 17:48 ` [Qemu-devel] [PATCH v7 1/9] mirror: inherit supported write/zero flags Anton Nefedov
2018-01-29 19:21   ` Max Reitz
2018-01-29 19:26     ` Eric Blake
2018-01-30 12:15       ` Anton Nefedov
2018-01-30 16:00         ` Eric Blake
2018-01-31 17:20         ` Max Reitz
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 2/9] blkverify: set " Anton Nefedov
2018-01-29 19:23   ` Max Reitz
2018-01-18 17:49 ` Anton Nefedov [this message]
2018-01-29 19:37   ` [Qemu-devel] [PATCH v7 3/9] block: introduce BDRV_REQ_ALLOCATE flag Max Reitz
2018-01-30 12:34     ` Anton Nefedov
2018-01-31 17:31       ` Max Reitz
2018-02-01 13:34         ` Anton Nefedov
2018-02-01 18:06           ` Max Reitz
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 4/9] block: treat BDRV_REQ_ALLOCATE as serialising Anton Nefedov
2018-01-29 19:48   ` Max Reitz
2018-01-30 12:36     ` Anton Nefedov
2018-01-31 17:35       ` Max Reitz
2018-01-31 15:11   ` Alberto Garcia
2018-01-31 17:11     ` Anton Nefedov
2018-02-01 14:01       ` Alberto Garcia
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 5/9] file-posix: support BDRV_REQ_ALLOCATE Anton Nefedov
2018-01-29 19:56   ` Max Reitz
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 6/9] block: support BDRV_REQ_ALLOCATE in passthrough drivers Anton Nefedov
2018-01-29 19:58   ` Max Reitz
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 7/9] qcow2: move is_zero() up Anton Nefedov
2018-01-29 19:59   ` Max Reitz
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 8/9] qcow2: skip writing zero buffers to empty COW areas Anton Nefedov
2018-01-29 20:28   ` Max Reitz
2018-01-30 14:23     ` Anton Nefedov
2018-01-31 17:40       ` Max Reitz
2018-01-31 18:32         ` Eric Blake
2018-01-31 18:35           ` Max Reitz
2018-01-31 18:43             ` Eric Blake
2018-01-18 17:49 ` [Qemu-devel] [PATCH v7 9/9] iotest 134: test cluster-misaligned encrypted write Anton Nefedov
2018-01-29 20:30   ` Max Reitz
2018-01-30 13:03   ` Alberto Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1516297747-107232-4-git-send-email-anton.nefedov@virtuozzo.com \
    --to=anton.nefedov@virtuozzo.com \
    --cc=berto@igalia.com \
    --cc=den@virtuozzo.com \
    --cc=eblake@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).