qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: patches@linaro.org, Richard Henderson <rth@twiddle.net>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PATCH] Drop remaining bits of ia64 host support
Date: Thu, 25 Jan 2018 16:19:49 +0000	[thread overview]
Message-ID: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org> (raw)

We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog).  However there are a few bits
and pieces of code still floating about.  Remove those, too.

We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
You could in theory have before this commit tried to still use ia64
hosts with the TCI interpreter, but there's no point in supporting
ia64 hosts with TCI but not proper TCG.

The next bit of cleanup I'd like to do after this is get rid
of the "uname -m" fallback in the configure cpu-detection code...


 configure                |  5 -----
 include/qemu/processor.h |  3 ---
 include/qemu/timer.h     |  9 ---------
 accel/tcg/user-exec.c    | 33 ---------------------------------
 linux-user/syscall.c     |  7 +------
 5 files changed, 1 insertion(+), 56 deletions(-)

diff --git a/configure b/configure
index 044c6fa..2f12c77 100755
--- a/configure
+++ b/configure
@@ -636,8 +636,6 @@ elif check_define _ARCH_PPC ; then
   fi
 elif check_define __mips__ ; then
   cpu="mips"
-elif check_define __ia64__ ; then
-  cpu="ia64"
 elif check_define __s390__ ; then
   if check_define __s390x__ ; then
     cpu="s390x"
@@ -4744,9 +4742,6 @@ if test "$coroutine_pool" = ""; then
 fi
 
 if test "$debug_stack_usage" = "yes"; then
-  if test "$cpu" = "ia64" -o "$cpu" = "hppa"; then
-    error_exit "stack usage debugging is not supported for $cpu"
-  fi
   if test "$coroutine_pool" = "yes"; then
     echo "WARN: disabling coroutine pool for stack usage debugging"
     coroutine_pool=no
diff --git a/include/qemu/processor.h b/include/qemu/processor.h
index 8b25702..8e16c92 100644
--- a/include/qemu/processor.h
+++ b/include/qemu/processor.h
@@ -12,9 +12,6 @@
 #if defined(__i386__) || defined(__x86_64__)
 # define cpu_relax() asm volatile("rep; nop" ::: "memory")
 
-#elif defined(__ia64__)
-# define cpu_relax() asm volatile("hint @pause" ::: "memory")
-
 #elif defined(__aarch64__)
 # define cpu_relax() asm volatile("yield" ::: "memory")
 
diff --git a/include/qemu/timer.h b/include/qemu/timer.h
index 1b518bc..3b5a54b 100644
--- a/include/qemu/timer.h
+++ b/include/qemu/timer.h
@@ -931,15 +931,6 @@ static inline int64_t cpu_get_host_ticks(void)
     return val;
 }
 
-#elif defined(__ia64)
-
-static inline int64_t cpu_get_host_ticks(void)
-{
-    int64_t val;
-    asm volatile ("mov %0 = ar.itc" : "=r"(val) :: "memory");
-    return val;
-}
-
 #elif defined(__s390__)
 
 static inline int64_t cpu_get_host_ticks(void)
diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c
index c973752..eb95cda 100644
--- a/accel/tcg/user-exec.c
+++ b/accel/tcg/user-exec.c
@@ -503,39 +503,6 @@ int cpu_signal_handler(int host_signum, void *pinfo, void *puc)
     return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
 }
 
-#elif defined(__ia64)
-
-#ifndef __ISR_VALID
-  /* This ought to be in <bits/siginfo.h>... */
-# define __ISR_VALID    1
-#endif
-
-int cpu_signal_handler(int host_signum, void *pinfo, void *puc)
-{
-    siginfo_t *info = pinfo;
-    ucontext_t *uc = puc;
-    unsigned long ip;
-    int is_write = 0;
-
-    ip = uc->uc_mcontext.sc_ip;
-    switch (host_signum) {
-    case SIGILL:
-    case SIGFPE:
-    case SIGSEGV:
-    case SIGBUS:
-    case SIGTRAP:
-        if (info->si_code && (info->si_segvflags & __ISR_VALID)) {
-            /* ISR.W (write-access) is bit 33:  */
-            is_write = (info->si_isr >> 33) & 1;
-        }
-        break;
-
-    default:
-        break;
-    }
-    return handle_cpu_signal(ip, info, is_write, (sigset_t *)&uc->uc_sigmask);
-}
-
 #elif defined(__s390__)
 
 int cpu_signal_handler(int host_signum, void *pinfo,
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 7437894..df1edf0 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -36,10 +36,6 @@
 #include <linux/capability.h>
 #include <sched.h>
 #include <sys/timex.h>
-#ifdef __ia64__
-int __clone2(int (*fn)(void *), void *child_stack_base,
-             size_t stack_size, int flags, void *arg, ...);
-#endif
 #include <sys/socket.h>
 #include <sys/un.h>
 #include <sys/uio.h>
@@ -246,8 +242,7 @@ static type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,	\
 #define __NR_sys_inotify_add_watch __NR_inotify_add_watch
 #define __NR_sys_inotify_rm_watch __NR_inotify_rm_watch
 
-#if defined(__alpha__) || defined (__ia64__) || defined(__x86_64__) || \
-    defined(__s390x__)
+#if defined(__alpha__) || defined(__x86_64__) || defined(__s390x__)
 #define __NR__llseek __NR_lseek
 #endif
 
-- 
2.7.4

             reply	other threads:[~2018-01-25 16:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-25 16:19 Peter Maydell [this message]
2018-01-25 16:54 ` [Qemu-devel] [PATCH] Drop remaining bits of ia64 host support Richard Henderson
2018-01-26 11:01 ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1516897189-11035-1-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=patches@linaro.org \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).