[Qemu-devel] [PULL 11/26] pci-bridge/i82801b11: clear bridge registers on platform reset

["Michael S. Tsirkin" <mst@redhat.com>]

From: Laszlo Ersek <lersek@redhat.com>

The "i82801b11-bridge" device model is a descendant of "base-pci-bridge"
(TYPE_PCI_BRIDGE). However, unlike other similar devices, such as

- pci-bridge,
- pcie-pci-bridge,
- PCIE Root Port,
- xio3130 switch upstream and downstream ports,
- dec-21154-p2p-bridge,
- pbm-bridge,
- xilinx-pcie-root,

"i82801b11-bridge" does not clear the bridge specific registers at
platform reset.

This is a problem because devices on "i82801b11-bridge" continue to
respond to config space cycles after platform reset, when addressed with
the bus number that was previously programmed into the secondary bus
number register of "i82801b11-bridge". This error breaks OVMF's search for
extra (PXB) root buses, for example.

The device class reset method for "i82801b11-bridge" is currently NULL;
set it directly to pci_bridge_reset(), like the last three bridge models
in the above listing do.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: qemu-stable@nongnu.org
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1541839
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/pci-bridge/i82801b11.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/hw/pci-bridge/i82801b11.c b/hw/pci-bridge/i82801b11.c
index cb522bf..ebf7f5f 100644
--- a/hw/pci-bridge/i82801b11.c
+++ b/hw/pci-bridge/i82801b11.c
@@ -98,6 +98,7 @@ static void i82801b11_bridge_class_init(ObjectClass *klass, void *data)
     k->realize = i82801b11_bridge_realize;
     k->config_write = pci_bridge_write_config;
     dc->vmsd = &i82801b11_bridge_dev_vmstate;
+    dc->reset = pci_bridge_reset;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
 }
 
-- 
MST