From: "Collin L. Walling" <walling@linux.vnet.ibm.com>
To: qemu-s390x@nongnu.org, qemu-devel@nongnu.org
Cc: borntraeger@de.ibm.com, frankja@linux.vnet.ibm.com,
cohuck@redhat.com, thuth@redhat.com, david@redhat.com,
alifm@linux.vnet.ibm.com, eblake@redhat.com,
mihajlov@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH v6 06/12] s390-ccw: parse and set boot menu options
Date: Thu, 15 Feb 2018 17:54:27 -0500 [thread overview]
Message-ID: <1518735273-16089-7-git-send-email-walling@linux.vnet.ibm.com> (raw)
In-Reply-To: <1518735273-16089-1-git-send-email-walling@linux.vnet.ibm.com>
Set boot menu options for an s390 guest and store them in
the iplb. These options are set via the QEMU command line
option:
-boot menu=on|off[,splash-time=X]
or via the libvirt domain xml:
<os>
<bootmenu enable='yes|no' timeout='X'/>
</os>
Where X represents some positive integer representing
milliseconds.
Any value set for loadparm will override all boot menu options.
If loadparm=PROMPT, then the menu will be enabled without a
timeout.
The absence of any boot options on the command line will flag
to later use the zipl boot loader values.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/s390x/ipl.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
hw/s390x/ipl.h | 9 +++++++--
pc-bios/s390-ccw/iplb.h | 6 ++++--
3 files changed, 59 insertions(+), 4 deletions(-)
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 31565ce..c8109f5 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -23,6 +23,9 @@
#include "hw/s390x/ebcdic.h"
#include "ipl.h"
#include "qemu/error-report.h"
+#include "qemu/config-file.h"
+#include "qemu/cutils.h"
+#include "qemu/option.h"
#define KERN_IMAGE_START 0x010000UL
#define KERN_PARM_AREA 0x010480UL
@@ -219,6 +222,50 @@ static Property s390_ipl_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
+static void s390_ipl_set_boot_menu(IplParameterBlock *iplb)
+{
+ QemuOptsList *plist = qemu_find_opts("boot-opts");
+ QemuOpts *opts = QTAILQ_FIRST(&plist->head);
+ uint8_t *flags;
+ uint32_t *timeout;
+ const char *tmp;
+ unsigned long splash_time = 0;
+
+ switch (iplb->pbt) {
+ case S390_IPL_TYPE_CCW:
+ case S390_IPL_TYPE_QEMU_SCSI:
+ flags = &iplb->qipl.boot_menu_flags;
+ timeout = &iplb->qipl.boot_menu_timeout;
+ break;
+ default:
+ error_report("boot menu is not supported for this device type.");
+ return;
+ }
+
+ /* In the absence of -boot menu, use zipl parameters */
+ if (!qemu_opt_get(opts, "menu")) {
+ *flags = BOOT_MENU_FLAG_ZIPL_OPTS;
+ } else if (boot_menu) {
+ *flags = BOOT_MENU_FLAG_CMD_OPTS;
+
+ tmp = qemu_opt_get(opts, "splash-time");
+
+ if (tmp && qemu_strtoul(tmp, NULL, 10, &splash_time)) {
+ error_report("splash-time is invalid, forcing it to 0.");
+ splash_time = 0;
+ return;
+ }
+
+ if (splash_time > 0xffffffff) {
+ error_report("splash-time is too large, forcing it to max value.");
+ splash_time = 0xffffffff;
+ return;
+ }
+
+ *timeout = cpu_to_be32(splash_time);
+ }
+}
+
static bool s390_gen_initial_iplb(S390IPLState *ipl)
{
DeviceState *dev_st;
@@ -435,6 +482,7 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
}
ipl->iplb.qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
}
+ s390_ipl_set_boot_menu(&ipl->iplb);
s390_ipl_prepare_qipl(cpu);
}
diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
index cab8a97..7c3cab8 100644
--- a/hw/s390x/ipl.h
+++ b/hw/s390x/ipl.h
@@ -60,10 +60,15 @@ typedef struct IplBlockQemuScsi IplBlockQemuScsi;
#define QIPL_ADDRESS 0xcc
+#define BOOT_MENU_FLAG_CMD_OPTS 0x80
+#define BOOT_MENU_FLAG_ZIPL_OPTS 0x40
+
struct QemuIplParameters {
- uint8_t reserved1[4];
+ uint8_t boot_menu_flags;
+ uint8_t reserved1;
+ uint32_t boot_menu_timeout;
uint64_t netboot_start_addr;
- uint8_t reserved2[16];
+ uint8_t reserved2[14];
} QEMU_PACKED;
typedef struct QemuIplParameters QemuIplParameters;
diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
index 1266884..e8e442d 100644
--- a/pc-bios/s390-ccw/iplb.h
+++ b/pc-bios/s390-ccw/iplb.h
@@ -75,9 +75,11 @@ extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
#define QIPL_ADDRESS 0xcc
struct QemuIplParameters {
- uint8_t reserved1[4];
+ uint8_t boot_menu_flags;
+ uint8_t reserved1;
+ uint32_t boot_menu_timeout;
uint64_t netboot_start_addr;
- uint8_t reserved2[16];
+ uint8_t reserved2[14];
} __attribute__ ((packed));
typedef struct QemuIplParameters QemuIplParameters;
--
2.7.4
next prev parent reply other threads:[~2018-02-15 23:05 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 22:54 [Qemu-devel] [PATCH v6 00/12] Interactive Boot Menu for DASD and SCSI Guests on s390x Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 01/12] s390-ccw: refactor boot map table code Collin L. Walling
2018-02-16 10:42 ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-02-16 12:19 ` Viktor Mihajlovski
2018-02-16 14:57 ` Collin L. Walling
2018-02-16 15:54 ` Thomas Huth
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 02/12] s390-ccw: refactor eckd_block_num to use CHS Collin L. Walling
2018-02-16 10:44 ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 03/12] s390-ccw: refactor IPL structs Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 04/12] s390-ccw: update libc Collin L. Walling
2018-02-16 16:05 ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-02-16 16:08 ` Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 05/12] s390-ccw: move auxiliary IPL data to separate location Collin L. Walling
2018-02-16 12:25 ` Viktor Mihajlovski
2018-02-15 22:54 ` Collin L. Walling [this message]
2018-02-16 16:20 ` [Qemu-devel] [qemu-s390x] [PATCH v6 06/12] s390-ccw: parse and set boot menu options Thomas Huth
2018-02-16 16:25 ` Collin L. Walling
2018-02-16 16:36 ` Viktor Mihajlovski
2018-02-16 16:44 ` Collin L. Walling
2018-02-16 16:54 ` Viktor Mihajlovski
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 07/12] s390-ccw: set up interactive boot menu parameters Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 08/12] s390-ccw: read stage2 boot loader data to find menu Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 09/12] s390-ccw: print zipl boot menu Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 10/12] s390-ccw: read user input for boot index via the SCLP console Collin L. Walling
2018-02-16 15:03 ` David Hildenbrand
2018-02-16 15:13 ` Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 11/12] s390-ccw: set cp_receive mask only when needed and consume pending service irqs Collin L. Walling
2018-02-15 22:54 ` [Qemu-devel] [PATCH v6 12/12] s390-ccw: interactive boot menu for scsi Collin L. Walling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518735273-16089-7-git-send-email-walling@linux.vnet.ibm.com \
--to=walling@linux.vnet.ibm.com \
--cc=alifm@linux.vnet.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=eblake@redhat.com \
--cc=frankja@linux.vnet.ibm.com \
--cc=mihajlov@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).