From: Thomas Huth <thuth@redhat.com>
To: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
"Collin L. Walling" <walling@linux.vnet.ibm.com>,
qemu-devel@nongnu.org, qemu-s390x@nongnu.org
Subject: [Qemu-devel] [PULL-for-s390x 06/14] s390-ccw: parse and set boot menu options
Date: Mon, 26 Feb 2018 11:42:29 +0100 [thread overview]
Message-ID: <1519641757-12396-7-git-send-email-thuth@redhat.com> (raw)
In-Reply-To: <1519641757-12396-1-git-send-email-thuth@redhat.com>
From: "Collin L. Walling" <walling@linux.vnet.ibm.com>
Set boot menu options for an s390 guest and store them in
the iplb. These options are set via the QEMU command line
option:
-boot menu=on|off[,splash-time=X]
or via the libvirt domain xml:
<os>
<bootmenu enable='yes|no' timeout='X'/>
</os>
Where X represents some positive integer representing
milliseconds.
Any value set for loadparm will override all boot menu options.
If loadparm=PROMPT, then the menu will be enabled without a
timeout.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/s390x/ipl.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++
hw/s390x/ipl.h | 9 +++++++--
pc-bios/s390-ccw/iplb.h | 9 +++++++--
3 files changed, 66 insertions(+), 4 deletions(-)
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 79f5a58..ee2039d 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -23,6 +23,9 @@
#include "hw/s390x/ebcdic.h"
#include "ipl.h"
#include "qemu/error-report.h"
+#include "qemu/config-file.h"
+#include "qemu/cutils.h"
+#include "qemu/option.h"
#define KERN_IMAGE_START 0x010000UL
#define KERN_PARM_AREA 0x010480UL
@@ -219,6 +222,54 @@ static Property s390_ipl_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
+static void s390_ipl_set_boot_menu(S390IPLState *ipl)
+{
+ QemuOptsList *plist = qemu_find_opts("boot-opts");
+ QemuOpts *opts = QTAILQ_FIRST(&plist->head);
+ uint8_t *flags = &ipl->qipl.qipl_flags;
+ uint32_t *timeout = &ipl->qipl.boot_menu_timeout;
+ const char *tmp;
+ unsigned long splash_time = 0;
+
+ if (!get_boot_device(0)) {
+ if (boot_menu) {
+ error_report("boot menu requires a bootindex to be specified for "
+ "the IPL device.");
+ }
+ return;
+ }
+
+ switch (ipl->iplb.pbt) {
+ case S390_IPL_TYPE_CCW:
+ break;
+ default:
+ error_report("boot menu is not supported for this device type.");
+ return;
+ }
+
+ if (!boot_menu) {
+ return;
+ }
+
+ *flags |= QIPL_FLAG_BM_OPTS_CMD;
+
+ tmp = qemu_opt_get(opts, "splash-time");
+
+ if (tmp && qemu_strtoul(tmp, NULL, 10, &splash_time)) {
+ error_report("splash-time is invalid, forcing it to 0.");
+ *timeout = 0;
+ return;
+ }
+
+ if (splash_time > 0xffffffff) {
+ error_report("splash-time is too large, forcing it to max value.");
+ *timeout = 0xffffffff;
+ return;
+ }
+
+ *timeout = cpu_to_be32(splash_time);
+}
+
static bool s390_gen_initial_iplb(S390IPLState *ipl)
{
DeviceState *dev_st;
@@ -435,6 +486,7 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
}
ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
}
+ s390_ipl_set_boot_menu(ipl);
s390_ipl_prepare_qipl(cpu);
}
diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
index 5cc3b77..d6c6f75 100644
--- a/hw/s390x/ipl.h
+++ b/hw/s390x/ipl.h
@@ -91,6 +91,9 @@ void s390_reipl_request(void);
#define QIPL_ADDRESS 0xcc
+/* Boot Menu flags */
+#define QIPL_FLAG_BM_OPTS_CMD 0x80
+
/*
* The QEMU IPL Parameters will be stored at absolute address
* 204 (0xcc) which means it is 32-bit word aligned but not
@@ -104,9 +107,11 @@ void s390_reipl_request(void);
* in pc-bios/s390-ccw/iplb.h.
*/
struct QemuIplParameters {
- uint8_t reserved1[4];
+ uint8_t qipl_flags;
+ uint8_t reserved1[3];
uint64_t netboot_start_addr;
- uint8_t reserved2[16];
+ uint32_t boot_menu_timeout;
+ uint8_t reserved2[12];
} QEMU_PACKED;
typedef struct QemuIplParameters QemuIplParameters;
diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
index 31d2934..832bb94 100644
--- a/pc-bios/s390-ccw/iplb.h
+++ b/pc-bios/s390-ccw/iplb.h
@@ -74,14 +74,19 @@ extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
#define QIPL_ADDRESS 0xcc
+/* Boot Menu flags */
+#define QIPL_FLAG_BM_OPTS_CMD 0x80
+
/*
* This definition must be kept in sync with the defininition
* in hw/s390x/ipl.h
*/
struct QemuIplParameters {
- uint8_t reserved1[4];
+ uint8_t qipl_flags;
+ uint8_t reserved1[3];
uint64_t netboot_start_addr;
- uint8_t reserved2[16];
+ uint32_t boot_menu_timeout;
+ uint8_t reserved2[12];
} __attribute__ ((packed));
typedef struct QemuIplParameters QemuIplParameters;
--
1.8.3.1
next prev parent reply other threads:[~2018-02-26 10:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-26 10:42 [Qemu-devel] [PULL-for-s390x 00/14] s390-ccw firmware update Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 01/14] s390-ccw: refactor boot map table code Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 02/14] s390-ccw: refactor eckd_block_num to use CHS Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 03/14] s390-ccw: refactor IPL structs Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 04/14] s390-ccw: update libc Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 05/14] s390-ccw: move auxiliary IPL data to separate location Thomas Huth
2018-02-26 10:42 ` Thomas Huth [this message]
2018-02-26 18:48 ` [Qemu-devel] [PULL-for-s390x 06/14] s390-ccw: parse and set boot menu options Cornelia Huck
2018-02-26 19:29 ` [Qemu-devel] [qemu-s390x] " Collin L. Walling
2018-02-26 19:44 ` Collin L. Walling
2018-02-27 9:12 ` Cornelia Huck
2018-02-27 9:22 ` Thomas Huth
2018-02-27 15:04 ` Collin L. Walling
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 07/14] s390-ccw: set up interactive boot menu parameters Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 08/14] s390-ccw: read stage2 boot loader data to find menu Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 09/14] s390-ccw: print zipl boot menu Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 10/14] s390-ccw: read user input for boot index via the SCLP console Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 11/14] s390-ccw: set cp_receive mask only when needed and consume pending service irqs Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 12/14] s390-ccw: use zipl values when no boot menu options are present Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 13/14] s390-ccw: interactive boot menu for scsi Thomas Huth
2018-02-26 10:42 ` [Qemu-devel] [PULL-for-s390x 14/14] pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes Thomas Huth
2018-02-27 9:30 ` [Qemu-devel] [PULL-for-s390x 00/14] s390-ccw firmware update Cornelia Huck
2018-02-27 17:56 ` Peter Maydell
2018-02-27 18:51 ` Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519641757-12396-7-git-send-email-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=walling@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).