From: Michael Clark <mjc@sifive.com>
To: qemu-devel@nongnu.org
Cc: patches@groups.riscv.org, Michael Clark <mjc@sifive.com>,
Peter Maydell <peter.maydell@linaro.org>,
Palmer Dabbelt <palmer@sifive.com>,
Sagar Karandikar <sagark@eecs.berkeley.edu>,
Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Subject: [Qemu-devel] [PATCH v4 00/26] RISC-V Post-merge spec conformance and cleanup
Date: Mon, 19 Mar 2018 14:18:23 -0700 [thread overview]
Message-ID: <1521494329-19546-1-git-send-email-mjc@sifive.com> (raw)
This is a series of spec conformance bug fixes and code cleanups
that we would like to get in before the QEMU 2.12 release.
These patches have had extensive testing in the QEMU full system
emulator running SMP Linux. There are no linux-user changes.
* Implements WARL behavior for CSRs that don't support writes
* Improves specification conformance of the page table walker
* Change access checks from ternary operator to if statements
* Checks for misaligned PPNs
* Disallow M-mode or S-mode from fetching from User pages
* Adds reserved PTE flag check: W or W|X
* Set read perms for PTE X flag if mstatus.mxr is in effect
* Improves page walker comments and general readability
* Several trivial code cleanups to hw/riscv
* Replacing hard coded constants with reference to enums
or the machine memory maps.
* Remove unnecessary class initialization boilerplate
* Adds bounds checks when writing device-tree to ROM
* Updates the cpu model to use a more modern interface
* Sets mtval/stval to zero on exceptions without addresses
* Fixes memory allocation bug in riscv_isa_string
v4
* added fix for memory allocation bug in riscv_isa_string
* trivial fix to remove erroneous comment from translate.c
v3
* refactor rcu_read_lock in PTE update to use single unlock
* mstatus.mxr is in effect regardless of privilege mode
* remove unnecessary class init from riscv_hart
* set mtval/stval to zero on exceptions without addresses
v2
* remove unused class boilerplate retains qom parent_obj
* convert cpu definition towards future model
* honor mstatus.mxr flag in page table walker
v1
* initial post merge cleanup patch series
Michael Clark (26):
RISC-V: Make virt create_fdt interface consistent
RISC-V: Replace hardcoded constants with enum values
RISC-V: Make virt board description match spike
RISC-V: Use ROM base address and size from memmap
RISC-V: Remove identity_translate from load_elf
RISC-V: Mark ROM read-only after copying in code
RISC-V: Remove unused class definitions
RISC-V: Make sure rom has space for fdt
RISC-V: Include intruction hex in disassembly
RISC-V: Hold rcu_read_lock when accessing memory
RISC-V: Improve page table walker spec compliance
RISC-V: Update E order and I extension order
RISC-V: Make some header guards more specific
RISC-V: Make virt header comment title consistent
RISC-V: Use memory_region_is_ram in pte update
RISC-V: Remove EM_RISCV ELF_MACHINE indirection
RISC-V: Hardwire satp to 0 for no-mmu case
RISC-V: Remove braces from satp case statement
RISC-V: riscv-qemu port supports sv39 and sv48
RISC-V: vectored traps are optional
RISC-V: No traps on writes to misa,minstret,mcycle
RISC-V: Remove support for adhoc X_COP interrupt
RISC-V: Convert cpu definition towards future model
RISC-V: Clear mtval/stval on exceptions without info
RISC-V: Remove erroneous comment from translate.c
RISC-V: Fix riscv_isa_string memory size bug
disas/riscv.c | 39 ++++++------
hw/riscv/riscv_hart.c | 6 --
hw/riscv/sifive_clint.c | 9 +--
hw/riscv/sifive_e.c | 34 +---------
hw/riscv/sifive_u.c | 65 ++++++-------------
hw/riscv/spike.c | 65 ++++++++-----------
hw/riscv/virt.c | 77 ++++++++--------------
include/hw/riscv/sifive_clint.h | 4 ++
include/hw/riscv/sifive_e.h | 5 --
include/hw/riscv/sifive_u.h | 9 ++-
include/hw/riscv/spike.h | 15 ++---
include/hw/riscv/virt.h | 17 ++---
target/riscv/cpu.c | 137 ++++++++++++++++++++++------------------
target/riscv/cpu.h | 6 +-
target/riscv/cpu_bits.h | 3 -
target/riscv/helper.c | 84 ++++++++++++++++++------
target/riscv/op_helper.c | 52 +++++++--------
target/riscv/translate.c | 1 -
18 files changed, 287 insertions(+), 341 deletions(-)
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
--
2.7.0
next reply other threads:[~2018-03-19 21:19 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-19 21:18 Michael Clark [this message]
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 01/26] RISC-V: Make virt create_fdt interface consistent Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 02/26] RISC-V: Replace hardcoded constants with enum values Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 03/26] RISC-V: Make virt board description match spike Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 04/26] RISC-V: Use ROM base address and size from memmap Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 05/26] RISC-V: Remove identity_translate from load_elf Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 06/26] RISC-V: Mark ROM read-only after copying in code Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 07/26] RISC-V: Remove unused class definitions Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 08/26] RISC-V: Make sure rom has space for fdt Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 09/26] RISC-V: Include intruction hex in disassembly Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 10/26] RISC-V: Hold rcu_read_lock when accessing memory Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 11/26] RISC-V: Improve page table walker spec compliance Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 12/26] RISC-V: Update E order and I extension order Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 13/26] RISC-V: Make some header guards more specific Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 14/26] RISC-V: Make virt header comment title consistent Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 15/26] RISC-V: Use memory_region_is_ram in pte update Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 16/26] RISC-V: Remove EM_RISCV ELF_MACHINE indirection Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 17/26] RISC-V: Hardwire satp to 0 for no-mmu case Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 18/26] RISC-V: Remove braces from satp case statement Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 19/26] RISC-V: riscv-qemu port supports sv39 and sv48 Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 20/26] RISC-V: vectored traps are optional Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 21/26] RISC-V: No traps on writes to misa, minstret, mcycle Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 22/26] RISC-V: Remove support for adhoc X_COP interrupt Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 23/26] RISC-V: Convert cpu definition towards future model Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 24/26] RISC-V: Clear mtval/stval on exceptions without info Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 25/26] RISC-V: Remove erroneous comment from translate.c Michael Clark
2018-03-19 21:18 ` [Qemu-devel] [PATCH v4 26/26] RISC-V: Fix riscv_isa_string memory size bug Michael Clark
2018-03-20 11:51 ` Peter Maydell
2018-03-20 20:51 ` Philippe Mathieu-Daudé
2018-03-20 21:35 ` [Qemu-devel] [patches] " Michael Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521494329-19546-1-git-send-email-mjc@sifive.com \
--to=mjc@sifive.com \
--cc=kbastian@mail.uni-paderborn.de \
--cc=palmer@sifive.com \
--cc=patches@groups.riscv.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sagark@eecs.berkeley.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).