qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>,
	"Juan Quintela" <quintela@redhat.com>
Subject: [Qemu-devel] [PULL v2 27/50] vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message
Date: Tue, 20 Mar 2018 05:17:39 +0200	[thread overview]
Message-ID: <1521515720-612046-28-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1521515720-612046-1-git-send-email-mst@redhat.com>

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.

Later patches will fill in the behaviour/contents of the
message.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 docs/interop/vhost-user.txt           | 10 ++++++++
 contrib/libvhost-user/libvhost-user.h |  3 +++
 migration/postcopy-ram.h              |  1 +
 contrib/libvhost-user/libvhost-user.c | 11 ++++++++
 hw/virtio/vhost-user.c                | 48 +++++++++++++++++++++++++++++++++++
 migration/savevm.c                    |  6 +++++
 6 files changed, 79 insertions(+)

diff --git a/docs/interop/vhost-user.txt b/docs/interop/vhost-user.txt
index 91a572d..7854e50 100644
--- a/docs/interop/vhost-user.txt
+++ b/docs/interop/vhost-user.txt
@@ -699,6 +699,16 @@ Master message types
      feature has been successfully negotiated.
      It's a required feature for crypto devices.
 
+ * VHOST_USER_POSTCOPY_ADVISE
+      Id: 28
+      Master payload: N/A
+      Slave payload: userfault fd
+
+      When VHOST_USER_PROTOCOL_F_PAGEFAULT is supported, the
+      master advises slave that a migration with postcopy enabled is underway,
+      the slave must open a userfaultfd for later use.
+      Note that at this stage the migration is still in precopy mode.
+
 Slave message types
 -------------------
 
diff --git a/contrib/libvhost-user/libvhost-user.h b/contrib/libvhost-user/libvhost-user.h
index 96db29c..00d78a8 100644
--- a/contrib/libvhost-user/libvhost-user.h
+++ b/contrib/libvhost-user/libvhost-user.h
@@ -83,6 +83,9 @@ typedef enum VhostUserRequest {
     VHOST_USER_SET_VRING_ENDIAN = 23,
     VHOST_USER_GET_CONFIG = 24,
     VHOST_USER_SET_CONFIG = 25,
+    VHOST_USER_CREATE_CRYPTO_SESSION = 26,
+    VHOST_USER_CLOSE_CRYPTO_SESSION = 27,
+    VHOST_USER_POSTCOPY_ADVISE  = 28,
     VHOST_USER_MAX
 } VhostUserRequest;
 
diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h
index 2e879bb..0421c98 100644
--- a/migration/postcopy-ram.h
+++ b/migration/postcopy-ram.h
@@ -130,6 +130,7 @@ void postcopy_infrastructure_init(void);
  */
 enum PostcopyNotifyReason {
     POSTCOPY_NOTIFY_PROBE = 0,
+    POSTCOPY_NOTIFY_INBOUND_ADVISE,
 };
 
 struct PostcopyNotifyData {
diff --git a/contrib/libvhost-user/libvhost-user.c b/contrib/libvhost-user/libvhost-user.c
index 2e358b5..37d4228 100644
--- a/contrib/libvhost-user/libvhost-user.c
+++ b/contrib/libvhost-user/libvhost-user.c
@@ -86,6 +86,7 @@ vu_request_to_string(unsigned int req)
         REQ(VHOST_USER_SET_VRING_ENDIAN),
         REQ(VHOST_USER_GET_CONFIG),
         REQ(VHOST_USER_SET_CONFIG),
+        REQ(VHOST_USER_POSTCOPY_ADVISE),
         REQ(VHOST_USER_MAX),
     };
 #undef REQ
@@ -857,6 +858,14 @@ vu_set_config(VuDev *dev, VhostUserMsg *vmsg)
 }
 
 static bool
+vu_set_postcopy_advise(VuDev *dev, VhostUserMsg *vmsg)
+{
+    /* TODO: Open ufd, pass it back in the request */
+    vmsg->size = 0;
+    return true; /* = send a reply */
+}
+
+static bool
 vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
 {
     int do_reply = 0;
@@ -927,6 +936,8 @@ vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
         return vu_set_config(dev, vmsg);
     case VHOST_USER_NONE:
         break;
+    case VHOST_USER_POSTCOPY_ADVISE:
+        return vu_set_postcopy_advise(dev, vmsg);
     default:
         vmsg_close_fds(vmsg);
         vu_panic(dev, "Unhandled request: %d", vmsg->request);
diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
index aab35c4..ceb17b0 100644
--- a/hw/virtio/vhost-user.c
+++ b/hw/virtio/vhost-user.c
@@ -78,6 +78,7 @@ typedef enum VhostUserRequest {
     VHOST_USER_SET_CONFIG = 25,
     VHOST_USER_CREATE_CRYPTO_SESSION = 26,
     VHOST_USER_CLOSE_CRYPTO_SESSION = 27,
+    VHOST_USER_POSTCOPY_ADVISE  = 28,
     VHOST_USER_MAX
 } VhostUserRequest;
 
@@ -795,6 +796,50 @@ out:
     return ret;
 }
 
+/*
+ * Called at the start of an inbound postcopy on reception of the
+ * 'advise' command.
+ */
+static int vhost_user_postcopy_advise(struct vhost_dev *dev, Error **errp)
+{
+    struct vhost_user *u = dev->opaque;
+    CharBackend *chr = u->chr;
+    int ufd;
+    VhostUserMsg msg = {
+        .hdr.request = VHOST_USER_POSTCOPY_ADVISE,
+        .hdr.flags = VHOST_USER_VERSION,
+    };
+
+    if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+        error_setg(errp, "Failed to send postcopy_advise to vhost");
+        return -1;
+    }
+
+    if (vhost_user_read(dev, &msg) < 0) {
+        error_setg(errp, "Failed to get postcopy_advise reply from vhost");
+        return -1;
+    }
+
+    if (msg.hdr.request != VHOST_USER_POSTCOPY_ADVISE) {
+        error_setg(errp, "Unexpected msg type. Expected %d received %d",
+                     VHOST_USER_POSTCOPY_ADVISE, msg.hdr.request);
+        return -1;
+    }
+
+    if (msg.hdr.size) {
+        error_setg(errp, "Received bad msg size.");
+        return -1;
+    }
+    ufd = qemu_chr_fe_get_msgfd(chr);
+    if (ufd < 0) {
+        error_setg(errp, "%s: Failed to get ufd", __func__);
+        return -1;
+    }
+
+    /* TODO: register ufd with userfault thread */
+    return 0;
+}
+
 static int vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
                                         void *opaque)
 {
@@ -814,6 +859,9 @@ static int vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
         }
         break;
 
+    case POSTCOPY_NOTIFY_INBOUND_ADVISE:
+        return vhost_user_postcopy_advise(dev, pnd->errp);
+
     default:
         /* We ignore notifications we don't know */
         break;
diff --git a/migration/savevm.c b/migration/savevm.c
index 358c5b5..1f2bf12 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1386,6 +1386,7 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis,
 {
     PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE);
     uint64_t remote_pagesize_summary, local_pagesize_summary, remote_tps;
+    Error *local_err = NULL;
 
     trace_loadvm_postcopy_handle_advise();
     if (ps != POSTCOPY_INCOMING_NONE) {
@@ -1451,6 +1452,11 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis,
         return -1;
     }
 
+    if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_ADVISE, &local_err)) {
+        error_report_err(local_err);
+        return -1;
+    }
+
     if (ram_postcopy_incoming_init(mis)) {
         return -1;
     }
-- 
MST

  parent reply	other threads:[~2018-03-20  3:17 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-20  3:16 [Qemu-devel] [PULL v2 00/50] virtio, vhost, pci, pc: features, cleanups Michael S. Tsirkin
2018-03-20  3:16 ` [Qemu-devel] [PULL v2 01/50] scripts/update-linux-headers: add ethtool.h and update to 4.16.0-rc4 Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 03/50] virtio-net: add linkspeed and duplex settings to virtio-net Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 02/50] virtio-net: use 64-bit values for feature flags Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 04/50] acpi: remove unused acpi-dsdt.aml Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 05/50] pc: replace pm object initialization with one-liner in acpi_get_pm_info() Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 06/50] acpi: reuse AcpiGenericAddress instead of Acpi20GenericAddress Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 07/50] acpi: add build_append_gas() helper for Generic Address Structure Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 08/50] acpi: move ACPI_PORT_SMI_CMD define to header it belongs to Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 09/50] pc: acpi: isolate FADT specific data into AcpiFadtData structure Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 10/50] pc: acpi: use build_append_foo() API to construct FADT Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 12/50] virt_arm: acpi: reuse common build_fadt() Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 11/50] acpi: move build_fadt() from i386 specific to generic ACPI source Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 13/50] tests: acpi: don't read all fields in test_acpi_fadt_table() Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 14/50] standard-headers: update virtio_net.h Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 15/50] hw/pci: remove obsolete PCIDevice->init() Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 16/50] pc-dimm: make qmp_pc_dimm_device_list() sort devices by address Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 17/50] qmp: distinguish PC-DIMM and NVDIMM in MemoryDeviceInfoList Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 18/50] hw/acpi-build: build SRAT memory affinity structures for DIMM devices Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 19/50] tests/bios-tables-test: add test cases for DIMM proximity Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 20/50] test/acpi-test-data: add ACPI tables for dimmpxm test Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 21/50] Makefile: add target to print generated files Michael S. Tsirkin
2018-04-13  7:21   ` Markus Armbruster
2018-04-13 10:04     ` Marc-André Lureau
2018-04-13 12:51       ` Michael S. Tsirkin
2018-05-04  5:44         ` Markus Armbruster
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 22/50] migrate: Update ram_block_discard_range for shared Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 23/50] qemu_ram_block_host_offset Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 24/50] postcopy: use UFFDIO_ZEROPAGE only when available Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 25/50] postcopy: Add notifier chain Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 26/50] postcopy: Add vhost-user flag for postcopy and check it Michael S. Tsirkin
2018-03-20  3:17 ` Michael S. Tsirkin [this message]
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 28/50] libvhost-user: Support sending fds back to qemu Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 29/50] libvhost-user: Open userfaultfd Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 31/50] vhost+postcopy: Register shared ufd with postcopy Michael S. Tsirkin
2018-04-27 16:12   ` Peter Maydell
2018-05-02 10:58     ` Dr. David Alan Gilbert
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 32/50] vhost+postcopy: Transmit 'listen' to slave Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 30/50] postcopy: Allow registering of fd handler Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 33/50] postcopy+vhost-user: Split set_mem_table for postcopy Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 34/50] migration/ram: ramblock_recv_bitmap_test_byte_offset Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 35/50] libvhost-user+postcopy: Register new regions with the ufd Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 37/50] vhost+postcopy: Stash RAMBlock and offset Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 36/50] vhost+postcopy: Send address back to qemu Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 38/50] vhost+postcopy: Helper to send requests to source for shared pages Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 39/50] vhost+postcopy: Resolve client address Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 40/50] postcopy: helper for waking shared Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 41/50] postcopy: postcopy_notify_shared_wake Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 42/50] vhost+postcopy: Add vhost waker Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 43/50] vhost+postcopy: Call wakeups Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 44/50] libvhost-user: mprotect & madvises for postcopy Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 45/50] vhost-user: Add VHOST_USER_POSTCOPY_END message Michael S. Tsirkin
2018-03-20  3:17 ` [Qemu-devel] [PULL v2 46/50] vhost+postcopy: Wire up POSTCOPY_END notify Michael S. Tsirkin
2018-03-20  3:18 ` [Qemu-devel] [PULL v2 47/50] vhost: Huge page align and merge Michael S. Tsirkin
2018-03-20  3:18 ` [Qemu-devel] [PULL v2 48/50] postcopy: Allow shared memory Michael S. Tsirkin
2018-03-20  3:18 ` [Qemu-devel] [PULL v2 50/50] postcopy shared docs Michael S. Tsirkin
2018-03-20  3:18 ` [Qemu-devel] [PULL v2 49/50] libvhost-user: Claim support for postcopy Michael S. Tsirkin
2018-03-20 14:18 ` [Qemu-devel] [PULL v2 00/50] virtio, vhost, pci, pc: features, cleanups Peter Maydell
2018-03-20 14:37   ` Michael S. Tsirkin
2018-03-20 15:05   ` Michael S. Tsirkin
2018-03-20 15:41     ` Peter Maydell
2018-03-20 15:51       ` Michael S. Tsirkin
2018-03-20 15:54         ` Peter Maydell
2018-03-20 16:02           ` Michael S. Tsirkin
2018-03-20 17:18             ` Peter Maydell
2018-03-20 17:22               ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1521515720-612046-28-git-send-email-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).