From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Peter Xu" <peterx@redhat.com>,
"Juan Quintela" <quintela@redhat.com>
Subject: [Qemu-devel] [PULL v2 32/50] vhost+postcopy: Transmit 'listen' to slave
Date: Tue, 20 Mar 2018 05:17:46 +0200 [thread overview]
Message-ID: <1521515720-612046-33-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1521515720-612046-1-git-send-email-mst@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
docs/interop/vhost-user.txt | 11 +++++++++++
contrib/libvhost-user/libvhost-user.h | 2 ++
migration/postcopy-ram.h | 1 +
contrib/libvhost-user/libvhost-user.c | 19 +++++++++++++++++++
hw/virtio/vhost-user.c | 34 ++++++++++++++++++++++++++++++++++
migration/savevm.c | 7 +++++++
hw/virtio/trace-events | 3 +++
7 files changed, 77 insertions(+)
diff --git a/docs/interop/vhost-user.txt b/docs/interop/vhost-user.txt
index 7854e50..0d24203 100644
--- a/docs/interop/vhost-user.txt
+++ b/docs/interop/vhost-user.txt
@@ -709,6 +709,17 @@ Master message types
the slave must open a userfaultfd for later use.
Note that at this stage the migration is still in precopy mode.
+ * VHOST_USER_POSTCOPY_LISTEN
+ Id: 29
+ Master payload: N/A
+
+ Master advises slave that a transition to postcopy mode has happened.
+ The slave must ensure that shared memory is registered with userfaultfd
+ to cause faulting of non-present pages.
+
+ This is always sent sometime after a VHOST_USER_POSTCOPY_ADVISE, and
+ thus only when VHOST_USER_PROTOCOL_F_PAGEFAULT is supported.
+
Slave message types
-------------------
diff --git a/contrib/libvhost-user/libvhost-user.h b/contrib/libvhost-user/libvhost-user.h
index 074b786..ed505cf 100644
--- a/contrib/libvhost-user/libvhost-user.h
+++ b/contrib/libvhost-user/libvhost-user.h
@@ -86,6 +86,7 @@ typedef enum VhostUserRequest {
VHOST_USER_CREATE_CRYPTO_SESSION = 26,
VHOST_USER_CLOSE_CRYPTO_SESSION = 27,
VHOST_USER_POSTCOPY_ADVISE = 28,
+ VHOST_USER_POSTCOPY_LISTEN = 29,
VHOST_USER_MAX
} VhostUserRequest;
@@ -285,6 +286,7 @@ struct VuDev {
/* Postcopy data */
int postcopy_ufd;
+ bool postcopy_listening;
};
typedef struct VuVirtqElement {
diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h
index f21eef6..c8ced34 100644
--- a/migration/postcopy-ram.h
+++ b/migration/postcopy-ram.h
@@ -131,6 +131,7 @@ void postcopy_infrastructure_init(void);
enum PostcopyNotifyReason {
POSTCOPY_NOTIFY_PROBE = 0,
POSTCOPY_NOTIFY_INBOUND_ADVISE,
+ POSTCOPY_NOTIFY_INBOUND_LISTEN,
};
struct PostcopyNotifyData {
diff --git a/contrib/libvhost-user/libvhost-user.c b/contrib/libvhost-user/libvhost-user.c
index 9e31f47..e53b195 100644
--- a/contrib/libvhost-user/libvhost-user.c
+++ b/contrib/libvhost-user/libvhost-user.c
@@ -98,6 +98,7 @@ vu_request_to_string(unsigned int req)
REQ(VHOST_USER_GET_CONFIG),
REQ(VHOST_USER_SET_CONFIG),
REQ(VHOST_USER_POSTCOPY_ADVISE),
+ REQ(VHOST_USER_POSTCOPY_LISTEN),
REQ(VHOST_USER_MAX),
};
#undef REQ
@@ -932,6 +933,22 @@ out:
}
static bool
+vu_set_postcopy_listen(VuDev *dev, VhostUserMsg *vmsg)
+{
+ vmsg->payload.u64 = -1;
+ vmsg->size = sizeof(vmsg->payload.u64);
+
+ if (dev->nregions) {
+ vu_panic(dev, "Regions already registered at postcopy-listen");
+ return true;
+ }
+ dev->postcopy_listening = true;
+
+ vmsg->flags = VHOST_USER_VERSION | VHOST_USER_REPLY_MASK;
+ vmsg->payload.u64 = 0; /* Success */
+ return true;
+}
+static bool
vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
{
int do_reply = 0;
@@ -1004,6 +1021,8 @@ vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
break;
case VHOST_USER_POSTCOPY_ADVISE:
return vu_set_postcopy_advise(dev, vmsg);
+ case VHOST_USER_POSTCOPY_LISTEN:
+ return vu_set_postcopy_listen(dev, vmsg);
default:
vmsg_close_fds(vmsg);
vu_panic(dev, "Unhandled request: %d", vmsg->request);
diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
index 5900583..c3ab299 100644
--- a/hw/virtio/vhost-user.c
+++ b/hw/virtio/vhost-user.c
@@ -20,6 +20,7 @@
#include "sysemu/cryptodev.h"
#include "migration/migration.h"
#include "migration/postcopy-ram.h"
+#include "trace.h"
#include <sys/ioctl.h>
#include <sys/socket.h>
@@ -79,6 +80,7 @@ typedef enum VhostUserRequest {
VHOST_USER_CREATE_CRYPTO_SESSION = 26,
VHOST_USER_CLOSE_CRYPTO_SESSION = 27,
VHOST_USER_POSTCOPY_ADVISE = 28,
+ VHOST_USER_POSTCOPY_LISTEN = 29,
VHOST_USER_MAX
} VhostUserRequest;
@@ -172,6 +174,8 @@ struct vhost_user {
int slave_fd;
NotifierWithReturn postcopy_notifier;
struct PostCopyFD postcopy_fd;
+ /* True once we've entered postcopy_listen */
+ bool postcopy_listen;
};
static bool ioeventfd_enabled(void)
@@ -858,6 +862,33 @@ static int vhost_user_postcopy_advise(struct vhost_dev *dev, Error **errp)
return 0;
}
+/*
+ * Called at the switch to postcopy on reception of the 'listen' command.
+ */
+static int vhost_user_postcopy_listen(struct vhost_dev *dev, Error **errp)
+{
+ struct vhost_user *u = dev->opaque;
+ int ret;
+ VhostUserMsg msg = {
+ .hdr.request = VHOST_USER_POSTCOPY_LISTEN,
+ .hdr.flags = VHOST_USER_VERSION | VHOST_USER_NEED_REPLY_MASK,
+ };
+ u->postcopy_listen = true;
+ trace_vhost_user_postcopy_listen();
+ if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+ error_setg(errp, "Failed to send postcopy_listen to vhost");
+ return -1;
+ }
+
+ ret = process_message_reply(dev, &msg);
+ if (ret) {
+ error_setg(errp, "Failed to receive reply to postcopy_listen");
+ return ret;
+ }
+
+ return 0;
+}
+
static int vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
void *opaque)
{
@@ -880,6 +911,9 @@ static int vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
case POSTCOPY_NOTIFY_INBOUND_ADVISE:
return vhost_user_postcopy_advise(dev, pnd->errp);
+ case POSTCOPY_NOTIFY_INBOUND_LISTEN:
+ return vhost_user_postcopy_listen(dev, pnd->errp);
+
default:
/* We ignore notifications we don't know */
break;
diff --git a/migration/savevm.c b/migration/savevm.c
index 1f2bf12..305c3ce 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1618,6 +1618,8 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
{
PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING);
trace_loadvm_postcopy_handle_listen();
+ Error *local_err = NULL;
+
if (ps != POSTCOPY_INCOMING_ADVISE && ps != POSTCOPY_INCOMING_DISCARD) {
error_report("CMD_POSTCOPY_LISTEN in wrong postcopy state (%d)", ps);
return -1;
@@ -1643,6 +1645,11 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
}
}
+ if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_LISTEN, &local_err)) {
+ error_report_err(local_err);
+ return -1;
+ }
+
if (mis->have_listen_thread) {
error_report("CMD_POSTCOPY_RAM_LISTEN already has a listen thread");
return -1;
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 742ff0f..06ec03d 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -6,6 +6,9 @@ vhost_region_add_section(const char *name, uint64_t gpa, uint64_t size, uint64_t
vhost_region_add_section_abut(const char *name, uint64_t new_size) "%s: 0x%"PRIx64
vhost_section(const char *name, int r) "%s:%d"
+# hw/virtio/vhost-user.c
+vhost_user_postcopy_listen(void) ""
+
# hw/virtio/virtio.c
virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u"
virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u"
--
MST
next prev parent reply other threads:[~2018-03-20 3:17 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-20 3:16 [Qemu-devel] [PULL v2 00/50] virtio, vhost, pci, pc: features, cleanups Michael S. Tsirkin
2018-03-20 3:16 ` [Qemu-devel] [PULL v2 01/50] scripts/update-linux-headers: add ethtool.h and update to 4.16.0-rc4 Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 03/50] virtio-net: add linkspeed and duplex settings to virtio-net Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 02/50] virtio-net: use 64-bit values for feature flags Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 04/50] acpi: remove unused acpi-dsdt.aml Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 05/50] pc: replace pm object initialization with one-liner in acpi_get_pm_info() Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 07/50] acpi: add build_append_gas() helper for Generic Address Structure Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 06/50] acpi: reuse AcpiGenericAddress instead of Acpi20GenericAddress Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 08/50] acpi: move ACPI_PORT_SMI_CMD define to header it belongs to Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 09/50] pc: acpi: isolate FADT specific data into AcpiFadtData structure Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 10/50] pc: acpi: use build_append_foo() API to construct FADT Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 11/50] acpi: move build_fadt() from i386 specific to generic ACPI source Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 12/50] virt_arm: acpi: reuse common build_fadt() Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 13/50] tests: acpi: don't read all fields in test_acpi_fadt_table() Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 15/50] hw/pci: remove obsolete PCIDevice->init() Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 14/50] standard-headers: update virtio_net.h Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 16/50] pc-dimm: make qmp_pc_dimm_device_list() sort devices by address Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 17/50] qmp: distinguish PC-DIMM and NVDIMM in MemoryDeviceInfoList Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 18/50] hw/acpi-build: build SRAT memory affinity structures for DIMM devices Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 19/50] tests/bios-tables-test: add test cases for DIMM proximity Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 20/50] test/acpi-test-data: add ACPI tables for dimmpxm test Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 21/50] Makefile: add target to print generated files Michael S. Tsirkin
2018-04-13 7:21 ` Markus Armbruster
2018-04-13 10:04 ` Marc-André Lureau
2018-04-13 12:51 ` Michael S. Tsirkin
2018-05-04 5:44 ` Markus Armbruster
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 22/50] migrate: Update ram_block_discard_range for shared Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 23/50] qemu_ram_block_host_offset Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 24/50] postcopy: use UFFDIO_ZEROPAGE only when available Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 25/50] postcopy: Add notifier chain Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 27/50] vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 26/50] postcopy: Add vhost-user flag for postcopy and check it Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 28/50] libvhost-user: Support sending fds back to qemu Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 29/50] libvhost-user: Open userfaultfd Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 30/50] postcopy: Allow registering of fd handler Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 31/50] vhost+postcopy: Register shared ufd with postcopy Michael S. Tsirkin
2018-04-27 16:12 ` Peter Maydell
2018-05-02 10:58 ` Dr. David Alan Gilbert
2018-03-20 3:17 ` Michael S. Tsirkin [this message]
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 33/50] postcopy+vhost-user: Split set_mem_table for postcopy Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 34/50] migration/ram: ramblock_recv_bitmap_test_byte_offset Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 35/50] libvhost-user+postcopy: Register new regions with the ufd Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 37/50] vhost+postcopy: Stash RAMBlock and offset Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 36/50] vhost+postcopy: Send address back to qemu Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 38/50] vhost+postcopy: Helper to send requests to source for shared pages Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 39/50] vhost+postcopy: Resolve client address Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 40/50] postcopy: helper for waking shared Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 41/50] postcopy: postcopy_notify_shared_wake Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 44/50] libvhost-user: mprotect & madvises for postcopy Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 42/50] vhost+postcopy: Add vhost waker Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 43/50] vhost+postcopy: Call wakeups Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 46/50] vhost+postcopy: Wire up POSTCOPY_END notify Michael S. Tsirkin
2018-03-20 3:17 ` [Qemu-devel] [PULL v2 45/50] vhost-user: Add VHOST_USER_POSTCOPY_END message Michael S. Tsirkin
2018-03-20 3:18 ` [Qemu-devel] [PULL v2 47/50] vhost: Huge page align and merge Michael S. Tsirkin
2018-03-20 3:18 ` [Qemu-devel] [PULL v2 48/50] postcopy: Allow shared memory Michael S. Tsirkin
2018-03-20 3:18 ` [Qemu-devel] [PULL v2 49/50] libvhost-user: Claim support for postcopy Michael S. Tsirkin
2018-03-20 3:18 ` [Qemu-devel] [PULL v2 50/50] postcopy shared docs Michael S. Tsirkin
2018-03-20 14:18 ` [Qemu-devel] [PULL v2 00/50] virtio, vhost, pci, pc: features, cleanups Peter Maydell
2018-03-20 14:37 ` Michael S. Tsirkin
2018-03-20 15:05 ` Michael S. Tsirkin
2018-03-20 15:41 ` Peter Maydell
2018-03-20 15:51 ` Michael S. Tsirkin
2018-03-20 15:54 ` Peter Maydell
2018-03-20 16:02 ` Michael S. Tsirkin
2018-03-20 17:18 ` Peter Maydell
2018-03-20 17:22 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521515720-612046-33-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=dgilbert@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).