qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Michael Clark <mjc@sifive.com>
To: qemu-devel@nongnu.org
Cc: patches@groups.riscv.org, Michael Clark <mjc@sifive.com>,
	Sagar Karandikar <sagark@eecs.berkeley.edu>,
	Bastian Koppelmann <kbastian@mail.uni-paderborn.de>,
	Palmer Dabbelt <palmer@sifive.com>,
	Alistair Francis <Alistair.Francis@wdc.com>
Subject: [Qemu-devel] [PATCH v1 06/30] RISC-V: Move non-ops from op_helper to cpu_helper
Date: Wed, 23 May 2018 12:14:53 +1200	[thread overview]
Message-ID: <1527034517-7851-7-git-send-email-mjc@sifive.com> (raw)
In-Reply-To: <1527034517-7851-1-git-send-email-mjc@sifive.com>

This patch makes op_helper.c contain only instruction
operation helpers used by translate.c and moves any
unrelated cpu helpers into cpu_helper.c. No logic is
changed by this patch.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---
 target/riscv/Makefile.objs              |  2 +-
 target/riscv/{helper.c => cpu_helper.c} | 35 ++++++++++++++++++++++++++++++++-
 target/riscv/op_helper.c                | 34 --------------------------------
 3 files changed, 35 insertions(+), 36 deletions(-)
 rename target/riscv/{helper.c => cpu_helper.c} (95%)

diff --git a/target/riscv/Makefile.objs b/target/riscv/Makefile.objs
index abd0a7cde333..fcc5d34c1f2e 100644
--- a/target/riscv/Makefile.objs
+++ b/target/riscv/Makefile.objs
@@ -1 +1 @@
-obj-y += translate.o op_helper.o helper.o cpu.o fpu_helper.o gdbstub.o pmp.o
+obj-y += translate.o op_helper.o cpu_helper.o cpu.o fpu_helper.o gdbstub.o pmp.o
diff --git a/target/riscv/helper.c b/target/riscv/cpu_helper.c
similarity index 95%
rename from target/riscv/helper.c
rename to target/riscv/cpu_helper.c
index 47d116e9c13f..6c886e99055a 100644
--- a/target/riscv/helper.c
+++ b/target/riscv/cpu_helper.c
@@ -1,5 +1,5 @@
 /*
- * RISC-V emulation helpers for qemu.
+ * RISC-V CPU helpers for qemu.
  *
  * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
  * Copyright (c) 2017-2018 SiFive, Inc.
@@ -72,6 +72,39 @@ bool riscv_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
 
 #if !defined(CONFIG_USER_ONLY)
 
+/* iothread_mutex must be held */
+uint32_t riscv_cpu_update_mip(RISCVCPU *cpu, uint32_t mask, uint32_t value)
+{
+    CPURISCVState *env = &cpu->env;
+    uint32_t old, new, cmp = atomic_read(&env->mip);
+
+    do {
+        old = cmp;
+        new = (old & ~mask) | (value & mask);
+        cmp = atomic_cmpxchg(&env->mip, old, new);
+    } while (old != cmp);
+
+    if (new && !old) {
+        cpu_interrupt(CPU(cpu), CPU_INTERRUPT_HARD);
+    } else if (!new && old) {
+        cpu_reset_interrupt(CPU(cpu), CPU_INTERRUPT_HARD);
+    }
+
+    return old;
+}
+
+void riscv_set_mode(CPURISCVState *env, target_ulong newpriv)
+{
+    if (newpriv > PRV_M) {
+        g_assert_not_reached();
+    }
+    if (newpriv == PRV_H) {
+        newpriv = PRV_U;
+    }
+    /* tlb_flush is unnecessary as mode is contained in mmu_idx */
+    env->priv = newpriv;
+}
+
 /* get_physical_address - get the physical address for this virtual address
  *
  * Do a page table walk to obtain the physical address corresponding to a
diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c
index 5a02795bf931..2b9dd9da6486 100644
--- a/target/riscv/op_helper.c
+++ b/target/riscv/op_helper.c
@@ -652,39 +652,6 @@ target_ulong helper_csrrc(CPURISCVState *env, target_ulong src,
 
 #ifndef CONFIG_USER_ONLY
 
-/* iothread_mutex must be held */
-uint32_t riscv_cpu_update_mip(RISCVCPU *cpu, uint32_t mask, uint32_t value)
-{
-    CPURISCVState *env = &cpu->env;
-    uint32_t old, new, cmp = atomic_read(&env->mip);
-
-    do {
-        old = cmp;
-        new = (old & ~mask) | (value & mask);
-        cmp = atomic_cmpxchg(&env->mip, old, new);
-    } while (old != cmp);
-
-    if (new && !old) {
-        cpu_interrupt(CPU(cpu), CPU_INTERRUPT_HARD);
-    } else if (!new && old) {
-        cpu_reset_interrupt(CPU(cpu), CPU_INTERRUPT_HARD);
-    }
-
-    return old;
-}
-
-void riscv_set_mode(CPURISCVState *env, target_ulong newpriv)
-{
-    if (newpriv > PRV_M) {
-        g_assert_not_reached();
-    }
-    if (newpriv == PRV_H) {
-        newpriv = PRV_U;
-    }
-    /* tlb_flush is unnecessary as mode is contained in mmu_idx */
-    env->priv = newpriv;
-}
-
 target_ulong helper_sret(CPURISCVState *env, target_ulong cpu_pc_deb)
 {
     if (!(env->priv >= PRV_S)) {
@@ -735,7 +702,6 @@ target_ulong helper_mret(CPURISCVState *env, target_ulong cpu_pc_deb)
     return retpc;
 }
 
-
 void helper_wfi(CPURISCVState *env)
 {
     CPUState *cs = CPU(riscv_env_get_cpu(env));
-- 
2.7.0

  parent reply	other threads:[~2018-05-23  0:17 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-23  0:14 [Qemu-devel] [PATCH v1 00/30] QEMU 2.13 RISC-V updates Michael Clark
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 01/30] RISC-V: Update address bits to support sv39 and sv48 Michael Clark
2018-05-25 15:07   ` Richard Henderson
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 02/30] RISC-V: Improve page table walker spec compliance Michael Clark
2018-05-23 22:31   ` Michael Clark
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 03/30] RISC-V: Use atomic_cmpxchg to update PLIC bitmaps Michael Clark
2018-05-29 23:32   ` Alistair Francis
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 04/30] RISC-V: Simplify riscv_cpu_local_irqs_pending Michael Clark
2018-05-25 15:15   ` Richard Henderson
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 05/30] RISC-V: Allow setting and clearing multiple irqs Michael Clark
2018-05-23 23:55   ` Alistair Francis
2018-05-25 15:19   ` Richard Henderson
2018-05-23  0:14 ` Michael Clark [this message]
2018-05-23 12:23   ` [Qemu-devel] [PATCH v1 06/30] RISC-V: Move non-ops from op_helper to cpu_helper Philippe Mathieu-Daudé
2018-05-25 15:20   ` Richard Henderson
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 07/30] RISC-V: Update CSR and interrupt definitions Michael Clark
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 08/30] RISC-V: Implement modular CSR helper interface Michael Clark
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 09/30] RISC-V: Implement atomic mip/sip CSR updates Michael Clark
2018-05-29 23:34   ` Alistair Francis
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 10/30] RISC-V: Implement existential predicates for CSRs Michael Clark
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 11/30] RISC-V: Split out mstatus_fs from tb_flags Michael Clark
2018-05-23 12:25   ` Philippe Mathieu-Daudé
2018-05-29 23:40   ` Alistair Francis
2018-05-23  0:14 ` [Qemu-devel] [PATCH v1 12/30] RISC-V: Mark mstatus.fs dirty Michael Clark
2018-05-29 23:38   ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 13/30] RISC-V: Implement mstatus.TSR/TW/TVM Michael Clark
2018-05-23 12:26   ` Philippe Mathieu-Daudé
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 14/30] RISC-V: Add public API for the CSR dispatch table Michael Clark
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 15/30] RISC-V: Add hartid and \n to interrupt logging Michael Clark
2018-05-23 12:33   ` Philippe Mathieu-Daudé
2018-05-24 22:47     ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 16/30] RISC-V: Use riscv prefix consistently on cpu helpers Michael Clark
2018-05-23 12:36   ` Philippe Mathieu-Daudé
2018-05-29 23:43   ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 17/30] RISC-V: Replace __builtin_popcount with ctpop8 in PLIC Michael Clark
2018-05-23 12:37   ` Philippe Mathieu-Daudé
2018-05-29 23:47   ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 18/30] RISC-V: Add missing free for plic_hart_config Michael Clark
2018-05-23 12:40   ` Philippe Mathieu-Daudé
2018-05-24 22:43     ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 19/30] RISC-V: Allow interrupt controllers to claim interrupts Michael Clark
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 20/30] RISC-V: Add misa to DisasContext Michael Clark
2018-05-23 12:42   ` Philippe Mathieu-Daudé
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 21/30] RISC-V: Add misa.MAFD checks to translate Michael Clark
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 22/30] RISC-V: Add misa runtime write support Michael Clark
2018-05-25 18:53   ` Richard Henderson
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 23/30] RISC-V: Fix CLINT timecmp low 32-bit writes Michael Clark
2018-05-25 22:40   ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 24/30] RISC-V: Fix PLIC pending bitfield reads Michael Clark
2018-05-25 22:38   ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 25/30] RISC-V: Enable second UART on sifive_e and sifive_u Michael Clark
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 26/30] RISC-V: Remove unnecessary disassembler constraints Michael Clark
2018-05-24 22:45   ` Alistair Francis
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 27/30] elf: Add RISC-V PSABI ELF header defines Michael Clark
2018-05-23  6:44   ` Laurent Vivier
2018-05-25  7:17     ` Michael Clark
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 28/30] RISC-V: linux-user support for RVE ABI Michael Clark
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 29/30] RISC-V: Don't add NULL bootargs to device-tree Michael Clark
2018-05-23 12:45   ` Philippe Mathieu-Daudé
2018-05-23  0:15 ` [Qemu-devel] [PATCH v1 30/30] RISC-V: Support separate firmware and kernel payload Michael Clark
2018-05-23 12:49   ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527034517-7851-7-git-send-email-mjc@sifive.com \
    --to=mjc@sifive.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=kbastian@mail.uni-paderborn.de \
    --cc=palmer@sifive.com \
    --cc=patches@groups.riscv.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sagark@eecs.berkeley.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).