* [Qemu-devel] [PATCH v3] xilinx_spips: Make dma transactions as per dma_burst_size
@ 2018-06-20 14:17 Sai Pavan Boddu
2018-06-20 16:13 ` Edgar E. Iglesias
0 siblings, 1 reply; 2+ messages in thread
From: Sai Pavan Boddu @ 2018-06-20 14:17 UTC (permalink / raw)
To: qemu-devel
Cc: Alistair Francis, Peter Crosthwaite, Peter Maydell,
Francisco Iglesias, Edgar E. Iglesias, KONRAD Frederic
Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t
dma-burst-size property.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
---
Changes for V2:
Remove dynamic allocation of dma_buf and limit burst size to 2k
Changes for V3:
Instead of proceeding with max burst size, report user the error.
hw/ssi/xilinx_spips.c | 23 ++++++++++++++++++++---
include/hw/ssi/xilinx_spips.h | 5 ++++-
2 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 03f5fae..d6ca36e 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -851,12 +851,17 @@ static void xlnx_zynqmp_qspips_notify(void *opaque)
{
size_t ret;
uint32_t num;
- const void *rxd = pop_buf(recv_fifo, 4, &num);
+ const void *rxd;
+ int len;
+
+ len = recv_fifo->num >= rq->dma_burst_size ? rq->dma_burst_size :
+ recv_fifo->num;
+ rxd = pop_buf(recv_fifo, len, &num);
memcpy(rq->dma_buf, rxd, num);
- ret = stream_push(rq->dma, rq->dma_buf, 4);
- assert(ret == 4);
+ ret = stream_push(rq->dma, rq->dma_buf, num);
+ assert(ret == num);
xlnx_zynqmp_qspips_check_flush(rq);
}
}
@@ -1333,6 +1338,12 @@ static void xlnx_zynqmp_qspips_realize(DeviceState *dev, Error **errp)
XlnxZynqMPQSPIPS *s = XLNX_ZYNQMP_QSPIPS(dev);
XilinxSPIPSClass *xsc = XILINX_SPIPS_GET_CLASS(s);
+ if (s->dma_burst_size > QSPI_DMA_MAX_BURST_SIZE) {
+ error_setg(errp,
+ "qspi dma burst size %u exceeds maximum limit %d",
+ s->dma_burst_size, QSPI_DMA_MAX_BURST_SIZE);
+ return;
+ }
xilinx_qspips_realize(dev, errp);
fifo8_create(&s->rx_fifo_g, xsc->rx_fifo_size);
fifo8_create(&s->tx_fifo_g, xsc->tx_fifo_size);
@@ -1411,6 +1422,11 @@ static const VMStateDescription vmstate_xlnx_zynqmp_qspips = {
}
};
+static Property xilinx_zynqmp_qspips_properties[] = {
+ DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS, dma_burst_size, 64),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static Property xilinx_qspips_properties[] = {
/* We had to turn this off for 2.10 as it is not compatible with migration.
* It can be enabled but will prevent the device to be migrated.
@@ -1463,6 +1479,7 @@ static void xlnx_zynqmp_qspips_class_init(ObjectClass *klass, void * data)
dc->realize = xlnx_zynqmp_qspips_realize;
dc->reset = xlnx_zynqmp_qspips_reset;
dc->vmsd = &vmstate_xlnx_zynqmp_qspips;
+ dc->props = xilinx_zynqmp_qspips_properties;
xsc->reg_ops = &xlnx_zynqmp_qspips_ops;
xsc->rx_fifo_size = RXFF_A_Q;
xsc->tx_fifo_size = TXFF_A_Q;
diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
index d398a4e..bc5596a 100644
--- a/include/hw/ssi/xilinx_spips.h
+++ b/include/hw/ssi/xilinx_spips.h
@@ -37,6 +37,8 @@ typedef struct XilinxSPIPS XilinxSPIPS;
/* Bite off 4k chunks at a time */
#define LQSPI_CACHE_SIZE 1024
+#define QSPI_DMA_MAX_BURST_SIZE 2048
+
typedef enum {
READ = 0x3, READ_4 = 0x13,
FAST_READ = 0xb, FAST_READ_4 = 0x0c,
@@ -95,7 +97,8 @@ typedef struct {
XilinxQSPIPS parent_obj;
StreamSlave *dma;
- uint8_t dma_buf[4];
+ uint8_t dma_buf[QSPI_DMA_MAX_BURST_SIZE];
+ uint32_t dma_burst_size;
int gqspi_irqline;
uint32_t regs[XLNX_ZYNQMP_SPIPS_R_MAX];
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [Qemu-devel] [PATCH v3] xilinx_spips: Make dma transactions as per dma_burst_size
2018-06-20 14:17 [Qemu-devel] [PATCH v3] xilinx_spips: Make dma transactions as per dma_burst_size Sai Pavan Boddu
@ 2018-06-20 16:13 ` Edgar E. Iglesias
0 siblings, 0 replies; 2+ messages in thread
From: Edgar E. Iglesias @ 2018-06-20 16:13 UTC (permalink / raw)
To: Sai Pavan Boddu
Cc: qemu-devel, Alistair Francis, Peter Crosthwaite, Peter Maydell,
Francisco Iglesias, KONRAD Frederic
On Wed, Jun 20, 2018 at 07:47:55PM +0530, Sai Pavan Boddu wrote:
> Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t
> dma-burst-size property.
Thanks Sai,
A nitpick, it's probably better to put dma_buf at thend of XlnxZynqMPQSPIPS
but in any case:
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
>
> Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
> ---
> Changes for V2:
> Remove dynamic allocation of dma_buf and limit burst size to 2k
> Changes for V3:
> Instead of proceeding with max burst size, report user the error.
>
> hw/ssi/xilinx_spips.c | 23 ++++++++++++++++++++---
> include/hw/ssi/xilinx_spips.h | 5 ++++-
> 2 files changed, 24 insertions(+), 4 deletions(-)
>
> diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
> index 03f5fae..d6ca36e 100644
> --- a/hw/ssi/xilinx_spips.c
> +++ b/hw/ssi/xilinx_spips.c
> @@ -851,12 +851,17 @@ static void xlnx_zynqmp_qspips_notify(void *opaque)
> {
> size_t ret;
> uint32_t num;
> - const void *rxd = pop_buf(recv_fifo, 4, &num);
> + const void *rxd;
> + int len;
> +
> + len = recv_fifo->num >= rq->dma_burst_size ? rq->dma_burst_size :
> + recv_fifo->num;
> + rxd = pop_buf(recv_fifo, len, &num);
>
> memcpy(rq->dma_buf, rxd, num);
>
> - ret = stream_push(rq->dma, rq->dma_buf, 4);
> - assert(ret == 4);
> + ret = stream_push(rq->dma, rq->dma_buf, num);
> + assert(ret == num);
> xlnx_zynqmp_qspips_check_flush(rq);
> }
> }
> @@ -1333,6 +1338,12 @@ static void xlnx_zynqmp_qspips_realize(DeviceState *dev, Error **errp)
> XlnxZynqMPQSPIPS *s = XLNX_ZYNQMP_QSPIPS(dev);
> XilinxSPIPSClass *xsc = XILINX_SPIPS_GET_CLASS(s);
>
> + if (s->dma_burst_size > QSPI_DMA_MAX_BURST_SIZE) {
> + error_setg(errp,
> + "qspi dma burst size %u exceeds maximum limit %d",
> + s->dma_burst_size, QSPI_DMA_MAX_BURST_SIZE);
> + return;
> + }
> xilinx_qspips_realize(dev, errp);
> fifo8_create(&s->rx_fifo_g, xsc->rx_fifo_size);
> fifo8_create(&s->tx_fifo_g, xsc->tx_fifo_size);
> @@ -1411,6 +1422,11 @@ static const VMStateDescription vmstate_xlnx_zynqmp_qspips = {
> }
> };
>
> +static Property xilinx_zynqmp_qspips_properties[] = {
> + DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS, dma_burst_size, 64),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> static Property xilinx_qspips_properties[] = {
> /* We had to turn this off for 2.10 as it is not compatible with migration.
> * It can be enabled but will prevent the device to be migrated.
> @@ -1463,6 +1479,7 @@ static void xlnx_zynqmp_qspips_class_init(ObjectClass *klass, void * data)
> dc->realize = xlnx_zynqmp_qspips_realize;
> dc->reset = xlnx_zynqmp_qspips_reset;
> dc->vmsd = &vmstate_xlnx_zynqmp_qspips;
> + dc->props = xilinx_zynqmp_qspips_properties;
> xsc->reg_ops = &xlnx_zynqmp_qspips_ops;
> xsc->rx_fifo_size = RXFF_A_Q;
> xsc->tx_fifo_size = TXFF_A_Q;
> diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
> index d398a4e..bc5596a 100644
> --- a/include/hw/ssi/xilinx_spips.h
> +++ b/include/hw/ssi/xilinx_spips.h
> @@ -37,6 +37,8 @@ typedef struct XilinxSPIPS XilinxSPIPS;
> /* Bite off 4k chunks at a time */
> #define LQSPI_CACHE_SIZE 1024
>
> +#define QSPI_DMA_MAX_BURST_SIZE 2048
> +
> typedef enum {
> READ = 0x3, READ_4 = 0x13,
> FAST_READ = 0xb, FAST_READ_4 = 0x0c,
> @@ -95,7 +97,8 @@ typedef struct {
> XilinxQSPIPS parent_obj;
>
> StreamSlave *dma;
> - uint8_t dma_buf[4];
> + uint8_t dma_buf[QSPI_DMA_MAX_BURST_SIZE];
> + uint32_t dma_burst_size;
> int gqspi_irqline;
>
> uint32_t regs[XLNX_ZYNQMP_SPIPS_R_MAX];
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-06-20 16:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-06-20 14:17 [Qemu-devel] [PATCH v3] xilinx_spips: Make dma transactions as per dma_burst_size Sai Pavan Boddu
2018-06-20 16:13 ` Edgar E. Iglesias
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).