From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
qemu-devel@nongnu.org, qemu-arm@nongnu.org,
peter.maydell@linaro.org, alex.williamson@redhat.com,
mst@redhat.com, jean-philippe.brucker@arm.com
Cc: will.deacon@arm.com, kevin.tian@intel.com, drjones@redhat.com,
wei@redhat.com, tn@semihalf.com, bharat.bhushan@nxp.com,
peterx@redhat.com, linuc.decode@gmail.com
Subject: [Qemu-devel] [RFC v7 07/16] virtio-iommu: Implement map/unmap
Date: Mon, 6 Aug 2018 22:14:35 +0200 [thread overview]
Message-ID: <1533586484-5737-8-git-send-email-eric.auger@redhat.com> (raw)
In-Reply-To: <1533586484-5737-1-git-send-email-eric.auger@redhat.com>
This patch implements virtio_iommu_map/unmap.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v5 -> v6:
- use new v0.6 fields
- replace error_report by qemu_log_mask
v3 -> v4:
- implement unmap semantics as specified in v0.4
---
hw/virtio/trace-events | 3 ++
hw/virtio/virtio-iommu.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index f4d6b4b..926c50b 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -63,3 +63,6 @@ virtio_iommu_get_endpoint(uint32_t ep_id) "Alloc endpoint=%d"
virtio_iommu_put_endpoint(uint32_t ep_id) "Free endpoint=%d"
virtio_iommu_get_domain(uint32_t domain_id) "Alloc domain=%d"
virtio_iommu_put_domain(uint32_t domain_id) "Free domain=%d"
+virtio_iommu_unmap_left_interval(uint64_t low, uint64_t high, uint64_t next_low, uint64_t next_high) "Unmap left [0x%"PRIx64",0x%"PRIx64"], new interval=[0x%"PRIx64",0x%"PRIx64"]"
+virtio_iommu_unmap_right_interval(uint64_t low, uint64_t high, uint64_t next_low, uint64_t next_high) "Unmap right [0x%"PRIx64",0x%"PRIx64"], new interval=[0x%"PRIx64",0x%"PRIx64"]"
+virtio_iommu_unmap_inc_interval(uint64_t low, uint64_t high) "Unmap inc [0x%"PRIx64",0x%"PRIx64"]"
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
index 4cb6e15..f3a6799 100644
--- a/hw/virtio/virtio-iommu.c
+++ b/hw/virtio/virtio-iommu.c
@@ -18,6 +18,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/log.h"
#include "qemu/iov.h"
#include "qemu-common.h"
#include "hw/virtio/virtio.h"
@@ -58,6 +59,13 @@ typedef struct viommu_interval {
uint64_t high;
} viommu_interval;
+typedef struct viommu_mapping {
+ uint64_t virt_addr;
+ uint64_t phys_addr;
+ uint64_t size;
+ uint32_t flags;
+} viommu_mapping;
+
static inline uint16_t virtio_iommu_get_sid(IOMMUDevice *dev)
{
return PCI_BUILD_BDF(pci_bus_num(dev->bus), dev->devfn);
@@ -253,10 +261,37 @@ static int virtio_iommu_map(VirtIOIOMMU *s,
uint64_t virt_start = le64_to_cpu(req->virt_start);
uint64_t virt_end = le64_to_cpu(req->virt_end);
uint32_t flags = le32_to_cpu(req->flags);
+ viommu_domain *domain;
+ viommu_interval *interval;
+ viommu_mapping *mapping;
+
+ interval = g_malloc0(sizeof(*interval));
+
+ interval->low = virt_start;
+ interval->high = virt_end;
+
+ domain = g_tree_lookup(s->domains, GUINT_TO_POINTER(domain_id));
+ if (!domain) {
+ return VIRTIO_IOMMU_S_NOENT;
+ }
+
+ mapping = g_tree_lookup(domain->mappings, (gpointer)interval);
+ if (mapping) {
+ g_free(interval);
+ return VIRTIO_IOMMU_S_INVAL;
+ }
trace_virtio_iommu_map(domain_id, virt_start, virt_end, phys_start, flags);
- return VIRTIO_IOMMU_S_UNSUPP;
+ mapping = g_malloc0(sizeof(*mapping));
+ mapping->virt_addr = virt_start;
+ mapping->phys_addr = phys_start;
+ mapping->size = virt_end - virt_start + 1;
+ mapping->flags = flags;
+
+ g_tree_insert(domain->mappings, interval, mapping);
+
+ return VIRTIO_IOMMU_S_OK;
}
static int virtio_iommu_unmap(VirtIOIOMMU *s,
@@ -265,10 +300,65 @@ static int virtio_iommu_unmap(VirtIOIOMMU *s,
uint32_t domain_id = le32_to_cpu(req->domain);
uint64_t virt_start = le64_to_cpu(req->virt_start);
uint64_t virt_end = le64_to_cpu(req->virt_end);
+ uint64_t size = virt_end - virt_start + 1;
+ viommu_mapping *mapping;
+ viommu_interval interval;
+ viommu_domain *domain;
trace_virtio_iommu_unmap(domain_id, virt_start, virt_end);
- return VIRTIO_IOMMU_S_UNSUPP;
+ domain = g_tree_lookup(s->domains, GUINT_TO_POINTER(domain_id));
+ if (!domain) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: no domain\n", __func__);
+ return VIRTIO_IOMMU_S_NOENT;
+ }
+ interval.low = virt_start;
+ interval.high = virt_end;
+
+ mapping = g_tree_lookup(domain->mappings, (gpointer)(&interval));
+
+ while (mapping) {
+ viommu_interval current;
+ uint64_t low = mapping->virt_addr;
+ uint64_t high = mapping->virt_addr + mapping->size - 1;
+
+ current.low = low;
+ current.high = high;
+
+ if (low == interval.low && size >= mapping->size) {
+ g_tree_remove(domain->mappings, (gpointer)(¤t));
+ interval.low = high + 1;
+ trace_virtio_iommu_unmap_left_interval(current.low, current.high,
+ interval.low, interval.high);
+ } else if (high == interval.high && size >= mapping->size) {
+ trace_virtio_iommu_unmap_right_interval(current.low, current.high,
+ interval.low, interval.high);
+ g_tree_remove(domain->mappings, (gpointer)(¤t));
+ interval.high = low - 1;
+ } else if (low > interval.low && high < interval.high) {
+ trace_virtio_iommu_unmap_inc_interval(current.low, current.high);
+ g_tree_remove(domain->mappings, (gpointer)(¤t));
+ } else {
+ break;
+ }
+ if (interval.low >= interval.high) {
+ return VIRTIO_IOMMU_S_OK;
+ } else {
+ mapping = g_tree_lookup(domain->mappings, (gpointer)(&interval));
+ }
+ }
+
+ if (mapping) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "****** %s: Unmap 0x%"PRIx64" size=0x%"PRIx64
+ " from 0x%"PRIx64" size=0x%"PRIx64" is not supported\n",
+ __func__, interval.low, size,
+ mapping->virt_addr, mapping->size);
+ } else {
+ return VIRTIO_IOMMU_S_OK;
+ }
+
+ return VIRTIO_IOMMU_S_INVAL;
}
#define get_payload_size(req) (\
--
2.5.5
next prev parent reply other threads:[~2018-08-06 20:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-06 20:14 [Qemu-devel] [RFC v7 00/16] VIRTIO-IOMMU device Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 01/16] linux-headers: Partial update for virtio-iommu v0.7 Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 02/16] virtio-iommu: Add skeleton Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 03/16] virtio-iommu: Decode the command payload Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 04/16] virtio-iommu: Add the iommu regions Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 05/16] virtio-iommu: Endpoint and domains structs and helpers Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 06/16] virtio-iommu: Implement attach/detach command Eric Auger
2018-08-06 20:14 ` Eric Auger [this message]
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 08/16] virtio-iommu: Implement translate Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 09/16] virtio-iommu: Implement probe request Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 10/16] virtio-iommu: Add an msi_bypass property Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 11/16] virtio-iommu: Implement fault reporting Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 12/16] virtio_iommu: Handle reserved regions in translation process Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 13/16] qdev: export qbus_find_recursive Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 14/16] hw/arm/virt: Add virtio-iommu to the virt board Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 15/16] hw/arm/virt-acpi-build: Add virtio-iommu node in IORT table Eric Auger
2018-08-06 20:14 ` [Qemu-devel] [RFC v7 16/16] hw/arm/virt: Allow virtio-iommu instantiation Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533586484-5737-8-git-send-email-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=bharat.bhushan@nxp.com \
--cc=drjones@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=jean-philippe.brucker@arm.com \
--cc=kevin.tian@intel.com \
--cc=linuc.decode@gmail.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=tn@semihalf.com \
--cc=wei@redhat.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).