From: Liam Merwick <Liam.Merwick@oracle.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 8/8] qcow2: Read outside array bounds in qcow2_pre_write_overlap_check()
Date: Fri, 31 Aug 2018 17:36:54 +0100 [thread overview]
Message-ID: <1535733414-6812-9-git-send-email-Liam.Merwick@oracle.com> (raw)
In-Reply-To: <1535733414-6812-1-git-send-email-Liam.Merwick@oracle.com>
The commit for 0e4e4318eaa5 increments QCOW2_OL_MAX_BITNR but does not
add an array entry for QCOW2_OL_BITMAP_DIRECTORY_BITNR to metadata_ol_names[].
As a result, an array dereference of metadata_ol_names[8] in
qcow2_pre_write_overlap_check() could result in a read outside of the array bounds.
Fixes: 0e4e4318eaa5 ('qcow2: add overlap check for bitmap directory')
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
---
block/qcow2-refcount.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index 3c539f02e5ec..fb0de187cfd2 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -2719,16 +2719,26 @@ int qcow2_check_metadata_overlap(BlockDriverState *bs, int ign, int64_t offset,
}
static const char *metadata_ol_names[] = {
- [QCOW2_OL_MAIN_HEADER_BITNR] = "qcow2_header",
- [QCOW2_OL_ACTIVE_L1_BITNR] = "active L1 table",
- [QCOW2_OL_ACTIVE_L2_BITNR] = "active L2 table",
- [QCOW2_OL_REFCOUNT_TABLE_BITNR] = "refcount table",
- [QCOW2_OL_REFCOUNT_BLOCK_BITNR] = "refcount block",
- [QCOW2_OL_SNAPSHOT_TABLE_BITNR] = "snapshot table",
- [QCOW2_OL_INACTIVE_L1_BITNR] = "inactive L1 table",
- [QCOW2_OL_INACTIVE_L2_BITNR] = "inactive L2 table",
+ [QCOW2_OL_MAIN_HEADER_BITNR] = "qcow2_header",
+ [QCOW2_OL_ACTIVE_L1_BITNR] = "active L1 table",
+ [QCOW2_OL_ACTIVE_L2_BITNR] = "active L2 table",
+ [QCOW2_OL_REFCOUNT_TABLE_BITNR] = "refcount table",
+ [QCOW2_OL_REFCOUNT_BLOCK_BITNR] = "refcount block",
+ [QCOW2_OL_SNAPSHOT_TABLE_BITNR] = "snapshot table",
+ [QCOW2_OL_INACTIVE_L1_BITNR] = "inactive L1 table",
+ [QCOW2_OL_INACTIVE_L2_BITNR] = "inactive L2 table",
+ [QCOW2_OL_BITMAP_DIRECTORY_BITNR] = "bitmap directory",
};
+
+/*
+ * Catch at compile time the case where an overlap detection bit
+ * was added to QCow2MetadataOverlap in block/qcow2.h but a
+ * corresponding entry to metadata_ol_names[] wasn't added.
+ */
+QEMU_BUILD_BUG_ON(QCOW2_OL_MAX_BITNR !=
+ (sizeof(metadata_ol_names) / sizeof(metadata_ol_names[0])));
+
/*
* First performs a check for metadata overlaps (through
* qcow2_check_metadata_overlap); if that fails with a negative value (error
--
1.8.3.1
next prev parent reply other threads:[~2018-08-31 16:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 16:36 [Qemu-devel] [PATCH v2 0/8] off-by-one and NULL pointer accesses detected by static analysis Liam Merwick
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 1/8] configure: Provide option to explicitly disable AVX2 Liam Merwick
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 2/8] job: Fix off-by-one assert checks for JobSTT and JobVerbTable Liam Merwick
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 3/8] block: Null pointer dereference in blk_root_get_parent_desc() Liam Merwick
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 4/8] qemu-img: potential Null pointer deref in img_commit() Liam Merwick
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 5/8] block: Fix potential Null pointer dereferences in vvfat.c Liam Merwick
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 6/8] block: dump_qlist() may dereference a Null pointer Liam Merwick
2018-08-31 16:47 ` Eric Blake
2018-08-31 16:36 ` [Qemu-devel] [PATCH v2 7/8] io: potential unnecessary check in qio_channel_command_new_spawn() Liam Merwick
2018-08-31 16:48 ` Eric Blake
2018-08-31 16:36 ` Liam Merwick [this message]
2018-08-31 16:53 ` [Qemu-devel] [PATCH v2 8/8] qcow2: Read outside array bounds in qcow2_pre_write_overlap_check() Eric Blake
2018-08-31 18:16 ` Liam Merwick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1535733414-6812-9-git-send-email-Liam.Merwick@oracle.com \
--to=liam.merwick@oracle.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).