From: Jason Wang <jasowang@redhat.com>
To: peter.maydell@linaro.org, qemu-devel@nongnu.org
Cc: Zhang Chen <zhangckid@gmail.com>,
zhanghailiang <zhang.zhanghailiang@huawei.com>,
Li Zhijian <lizhijian@cn.fujitsu.com>,
Zhang Chen <chen.zhang@intel.com>,
Jason Wang <jasowang@redhat.com>
Subject: [Qemu-devel] [PULL 07/26] COLO: Load dirty pages into SVM's RAM cache firstly
Date: Mon, 15 Oct 2018 16:46:07 +0800 [thread overview]
Message-ID: <1539593186-32183-8-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1539593186-32183-1-git-send-email-jasowang@redhat.com>
From: Zhang Chen <zhangckid@gmail.com>
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
include/exec/ram_addr.h | 1 +
migration/migration.c | 7 +++++
migration/ram.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++--
migration/ram.h | 4 +++
migration/savevm.c | 2 +-
5 files changed, 94 insertions(+), 3 deletions(-)
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 3abb639..9ecd911 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -27,6 +27,7 @@ struct RAMBlock {
struct rcu_head rcu;
struct MemoryRegion *mr;
uint8_t *host;
+ uint8_t *colo_cache; /* For colo, VM's ram cache */
ram_addr_t offset;
ram_addr_t used_length;
ram_addr_t max_length;
diff --git a/migration/migration.c b/migration/migration.c
index 215e81a..7696729 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -444,6 +444,11 @@ static void process_incoming_migration_co(void *opaque)
exit(EXIT_FAILURE);
}
+ if (colo_init_ram_cache() < 0) {
+ error_report("Init ram cache failed");
+ exit(EXIT_FAILURE);
+ }
+
qemu_thread_create(&mis->colo_incoming_thread, "COLO incoming",
colo_process_incoming_thread, mis, QEMU_THREAD_JOINABLE);
mis->have_colo_incoming_thread = true;
@@ -451,6 +456,8 @@ static void process_incoming_migration_co(void *opaque)
/* Wait checkpoint incoming thread exit before free resource */
qemu_thread_join(&mis->colo_incoming_thread);
+ /* We hold the global iothread lock, so it is safe here */
+ colo_release_ram_cache();
}
if (ret < 0) {
diff --git a/migration/ram.c b/migration/ram.c
index bc38d98..cd7a446 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -3447,6 +3447,20 @@ static inline void *host_from_ram_block_offset(RAMBlock *block,
return block->host + offset;
}
+static inline void *colo_cache_from_block_offset(RAMBlock *block,
+ ram_addr_t offset)
+{
+ if (!offset_in_ramblock(block, offset)) {
+ return NULL;
+ }
+ if (!block->colo_cache) {
+ error_report("%s: colo_cache is NULL in block :%s",
+ __func__, block->idstr);
+ return NULL;
+ }
+ return block->colo_cache + offset;
+}
+
/**
* ram_handle_compressed: handle the zero page case
*
@@ -3651,6 +3665,58 @@ static void decompress_data_with_multi_threads(QEMUFile *f,
qemu_mutex_unlock(&decomp_done_lock);
}
+/*
+ * colo cache: this is for secondary VM, we cache the whole
+ * memory of the secondary VM, it is need to hold the global lock
+ * to call this helper.
+ */
+int colo_init_ram_cache(void)
+{
+ RAMBlock *block;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ block->colo_cache = qemu_anon_ram_alloc(block->used_length,
+ NULL,
+ false);
+ if (!block->colo_cache) {
+ error_report("%s: Can't alloc memory for COLO cache of block %s,"
+ "size 0x" RAM_ADDR_FMT, __func__, block->idstr,
+ block->used_length);
+ goto out_locked;
+ }
+ memcpy(block->colo_cache, block->host, block->used_length);
+ }
+ rcu_read_unlock();
+ return 0;
+
+out_locked:
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+
+ rcu_read_unlock();
+ return -errno;
+}
+
+/* It is need to hold the global lock to call this helper */
+void colo_release_ram_cache(void)
+{
+ RAMBlock *block;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+ rcu_read_unlock();
+}
+
/**
* ram_load_setup: Setup RAM for migration incoming side
*
@@ -3667,6 +3733,7 @@ static int ram_load_setup(QEMUFile *f, void *opaque)
xbzrle_load_setup();
ramblock_recv_map_init();
+
return 0;
}
@@ -3687,6 +3754,7 @@ static int ram_load_cleanup(void *opaque)
g_free(rb->receivedmap);
rb->receivedmap = NULL;
}
+
return 0;
}
@@ -3924,13 +3992,24 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
RAMBlock *block = ram_block_from_stream(f, flags);
- host = host_from_ram_block_offset(block, addr);
+ /*
+ * After going into COLO, we should load the Page into colo_cache.
+ */
+ if (migration_incoming_in_colo_state()) {
+ host = colo_cache_from_block_offset(block, addr);
+ } else {
+ host = host_from_ram_block_offset(block, addr);
+ }
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
break;
}
- ramblock_recv_bitmap_set(block, host);
+
+ if (!migration_incoming_in_colo_state()) {
+ ramblock_recv_bitmap_set(block, host);
+ }
+
trace_ram_load_loop(block->idstr, (uint64_t)addr, flags, host);
}
diff --git a/migration/ram.h b/migration/ram.h
index a139066..83ff1bc 100644
--- a/migration/ram.h
+++ b/migration/ram.h
@@ -71,4 +71,8 @@ int64_t ramblock_recv_bitmap_send(QEMUFile *file,
const char *block_name);
int ram_dirty_bitmap_reload(MigrationState *s, RAMBlock *rb);
+/* ram cache */
+int colo_init_ram_cache(void);
+void colo_release_ram_cache(void);
+
#endif
diff --git a/migration/savevm.c b/migration/savevm.c
index 09ad962..288b807 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1933,7 +1933,7 @@ static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
static int loadvm_process_enable_colo(MigrationIncomingState *mis)
{
migration_incoming_enable_colo();
- return 0;
+ return colo_init_ram_cache();
}
/*
--
2.5.0
next prev parent reply other threads:[~2018-10-15 8:47 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-15 8:46 [Qemu-devel] [PULL 00/26] Net patches Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 01/26] filter-rewriter: Add TCP state machine and fix memory leak in connection_track_table Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 02/26] colo-compare: implement the process of checkpoint Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 03/26] colo-compare: use notifier to notify packets comparing result Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 04/26] COLO: integrate colo compare with colo frame Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 05/26] COLO: Add block replication into colo process Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 06/26] COLO: Remove colo_state migration struct Jason Wang
2018-10-15 8:46 ` Jason Wang [this message]
2018-10-15 8:46 ` [Qemu-devel] [PULL 08/26] ram/COLO: Record the dirty pages that SVM received Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 09/26] COLO: Flush memory data from ram cache Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 10/26] qmp event: Add COLO_EXIT event to notify users while exited COLO Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 11/26] qapi/migration.json: Rename COLO unknown mode to none mode Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 12/26] qapi: Add new command to query colo status Jason Wang
2018-10-15 18:31 ` Eric Blake
2018-10-15 8:46 ` [Qemu-devel] [PULL 13/26] savevm: split the process of different stages for loadvm/savevm Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 14/26] COLO: flush host dirty ram from cache Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 15/26] filter: Add handle_event method for NetFilterClass Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 16/26] filter-rewriter: handle checkpoint and failover event Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 17/26] COLO: notify net filters about checkpoint/failover event Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 18/26] COLO: quick failover process by kick COLO thread Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 19/26] docs: Add COLO status diagram to COLO-FT.txt Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 20/26] clean up callback when del virtqueue Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 21/26] ne2000: fix possible out of bound access in ne2000_receive Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 22/26] rtl8139: fix possible out of bound access Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 23/26] pcnet: fix possible buffer overflow Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 24/26] net: ignore packet size greater than INT_MAX Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 25/26] e1000: indicate dropped packets in HW counters Jason Wang
2018-10-15 8:46 ` [Qemu-devel] [PULL 26/26] qemu-options: Fix bad "macaddr" property in the documentation Jason Wang
2018-10-15 13:20 ` [Qemu-devel] [PULL 00/26] Net patches Peter Maydell
2018-10-16 10:10 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539593186-32183-8-git-send-email-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=chen.zhang@intel.com \
--cc=lizhijian@cn.fujitsu.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=zhang.zhanghailiang@huawei.com \
--cc=zhangckid@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).