From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: thuth@redhat.com, lvivier@redhat.com,
Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Subject: [Qemu-devel] [PATCH 1/5] tests/libqos: introduce virtio_start_device
Date: Tue, 15 Jan 2019 19:19:05 +0100 [thread overview]
Message-ID: <1547576349-13337-2-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1547576349-13337-1-git-send-email-pbonzini@redhat.com>
From: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
This function is intended to group all the qvirtio_* functions that
start the qvirtio devices.
Applied in all tests using this combination of functions.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/libqos/virtio.c | 7 +++++++
tests/libqos/virtio.h | 1 +
tests/vhost-user-test.c | 4 +---
tests/virtio-9p-test.c | 4 +---
tests/virtio-blk-test.c | 10 +++-------
tests/virtio-net-test.c | 4 +---
tests/virtio-scsi-test.c | 4 +---
7 files changed, 15 insertions(+), 19 deletions(-)
diff --git a/tests/libqos/virtio.c b/tests/libqos/virtio.c
index 0dad5c1..c1ff020 100644
--- a/tests/libqos/virtio.c
+++ b/tests/libqos/virtio.c
@@ -365,3 +365,10 @@ const char *qvirtio_get_dev_type(void)
return "pci";
}
}
+
+void qvirtio_start_device(QVirtioDevice *vdev)
+{
+ qvirtio_reset(vdev);
+ qvirtio_set_acknowledge(vdev);
+ qvirtio_set_driver(vdev);
+}
diff --git a/tests/libqos/virtio.h b/tests/libqos/virtio.h
index 69b5b13..2c68668 100644
--- a/tests/libqos/virtio.h
+++ b/tests/libqos/virtio.h
@@ -146,5 +146,6 @@ bool qvirtqueue_get_buf(QVirtQueue *vq, uint32_t *desc_idx, uint32_t *len);
void qvirtqueue_set_used_event(QVirtQueue *vq, uint16_t idx);
const char *qvirtio_get_dev_type(void);
+void qvirtio_start_device(QVirtioDevice *vdev);
#endif
diff --git a/tests/vhost-user-test.c b/tests/vhost-user-test.c
index ee7c2d9..04a3a65 100644
--- a/tests/vhost-user-test.c
+++ b/tests/vhost-user-test.c
@@ -203,9 +203,7 @@ static void init_virtio_dev(QTestState *qts, TestServer *s, uint32_t features_ma
g_assert_nonnull(s->dev);
qvirtio_pci_device_enable(s->dev);
- qvirtio_reset(&s->dev->vdev);
- qvirtio_set_acknowledge(&s->dev->vdev);
- qvirtio_set_driver(&s->dev->vdev);
+ qvirtio_start_device(&s->dev->vdev);
s->alloc = pc_alloc_init(qts);
diff --git a/tests/virtio-9p-test.c b/tests/virtio-9p-test.c
index a2b3108..d275c74 100644
--- a/tests/virtio-9p-test.c
+++ b/tests/virtio-9p-test.c
@@ -65,9 +65,7 @@ static QVirtIO9P *qvirtio_9p_pci_start(void)
v9p->dev = (QVirtioDevice *) dev;
qvirtio_pci_device_enable(dev);
- qvirtio_reset(v9p->dev);
- qvirtio_set_acknowledge(v9p->dev);
- qvirtio_set_driver(v9p->dev);
+ qvirtio_start_device(v9p->dev);
v9p->vq = qvirtqueue_setup(v9p->dev, v9p->qs->alloc, 0);
diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
index 04c6087..f97c158 100644
--- a/tests/virtio-blk-test.c
+++ b/tests/virtio-blk-test.c
@@ -116,10 +116,7 @@ static QVirtioPCIDevice *virtio_blk_pci_init(QPCIBus *bus, int slot)
g_assert_cmphex(dev->pdev->devfn, ==, ((slot << 3) | PCI_FN));
qvirtio_pci_device_enable(dev);
- qvirtio_reset(&dev->vdev);
- qvirtio_set_acknowledge(&dev->vdev);
- qvirtio_set_driver(&dev->vdev);
-
+ qvirtio_start_device(&dev->vdev);
return dev;
}
@@ -333,6 +330,7 @@ static void pci_indirect(void)
qvirtio_set_features(&dev->vdev, features);
vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 0);
+
qvirtio_set_driver_ok(&dev->vdev);
/* Write request */
@@ -720,9 +718,7 @@ static void mmio_basic(void)
g_assert(dev != NULL);
g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_BLOCK);
- qvirtio_reset(&dev->vdev);
- qvirtio_set_acknowledge(&dev->vdev);
- qvirtio_set_driver(&dev->vdev);
+ qvirtio_start_device(&dev->vdev);
alloc = generic_alloc_init(MMIO_RAM_ADDR, MMIO_RAM_SIZE, MMIO_PAGE_SIZE);
vq = qvirtqueue_setup(&dev->vdev, alloc, 0);
diff --git a/tests/virtio-net-test.c b/tests/virtio-net-test.c
index e9783e6..d4a32a4 100644
--- a/tests/virtio-net-test.c
+++ b/tests/virtio-net-test.c
@@ -44,9 +44,7 @@ static QVirtioPCIDevice *virtio_net_pci_init(QPCIBus *bus, int slot)
g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_NET);
qvirtio_pci_device_enable(dev);
- qvirtio_reset(&dev->vdev);
- qvirtio_set_acknowledge(&dev->vdev);
- qvirtio_set_driver(&dev->vdev);
+ qvirtio_start_device(&dev->vdev);
return dev;
}
diff --git a/tests/virtio-scsi-test.c b/tests/virtio-scsi-test.c
index 0d4f25d..961925c 100644
--- a/tests/virtio-scsi-test.c
+++ b/tests/virtio-scsi-test.c
@@ -159,9 +159,7 @@ static QVirtIOSCSI *qvirtio_scsi_pci_init(int slot)
g_assert_cmphex(vs->dev->device_type, ==, VIRTIO_ID_SCSI);
qvirtio_pci_device_enable(dev);
- qvirtio_reset(vs->dev);
- qvirtio_set_acknowledge(vs->dev);
- qvirtio_set_driver(vs->dev);
+ qvirtio_start_device(vs->dev);
vs->num_queues = qvirtio_config_readl(vs->dev, 0);
--
1.8.3.1
next prev parent reply other threads:[~2019-01-15 18:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-15 18:19 [Qemu-devel] [PATCH 0/5] qtest driver framework (core only) Paolo Bonzini
2019-01-15 18:19 ` Paolo Bonzini [this message]
2019-01-16 17:16 ` [Qemu-devel] [PATCH 1/5] tests/libqos: introduce virtio_start_device Laurent Vivier
2019-01-18 11:46 ` Thomas Huth
2019-01-15 18:19 ` [Qemu-devel] [PATCH 2/5] tests/libqos: rename qpci_init_pc and qpci_init_spapr functions Paolo Bonzini
2019-01-16 19:55 ` Laurent Vivier
2019-01-18 12:23 ` Thomas Huth
2019-01-18 12:45 ` Paolo Bonzini
2019-01-15 18:19 ` [Qemu-devel] [PATCH 3/5] tests: remove rule for nonexisting qdev-monitor-test Paolo Bonzini
2019-01-16 5:43 ` Thomas Huth
2019-01-17 9:47 ` Laurent Vivier
2019-01-15 18:19 ` [Qemu-devel] [PATCH 4/5] tests/libqos: embed allocators instead of malloc-ing them separately Paolo Bonzini
2019-01-17 10:37 ` Laurent Vivier
2019-01-18 12:52 ` Thomas Huth
2019-01-18 12:59 ` Paolo Bonzini
2019-01-15 18:19 ` [Qemu-devel] [PATCH 5/5] tests: qgraph API for the qtest driver framework Paolo Bonzini
2019-01-18 16:39 ` Thomas Huth
2019-01-18 16:58 ` Eric Blake
2019-01-18 17:07 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1547576349-13337-2-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=e.emanuelegiuseppe@gmail.com \
--cc=lvivier@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).