From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 12/49] vhost-user-test: skip if there is no memory at address 0
Date: Mon, 21 Jan 2019 19:05:43 +0100 [thread overview]
Message-ID: <1548093980-43088-13-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1548093980-43088-1-git-send-email-pbonzini@redhat.com>
The virt machine cannot run the vhost-user qtests because they hardcode
the presence of memory at address 0. Report the tests as a skip so that
they can be converted to use qgraph.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543851204-41186-11-git-send-email-pbonzini@redhat.com>
---
tests/vhost-user-test.c | 58 ++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 45 insertions(+), 13 deletions(-)
diff --git a/tests/vhost-user-test.c b/tests/vhost-user-test.c
index e36f3e6..30b0aba 100644
--- a/tests/vhost-user-test.c
+++ b/tests/vhost-user-test.c
@@ -231,9 +231,11 @@ static void uninit_virtio_dev(TestServer *s)
qvirtio_pci_device_free(s->dev);
}
-static void wait_for_fds(TestServer *s)
+static bool wait_for_fds(TestServer *s)
{
gint64 end_time;
+ bool got_region;
+ int i;
g_mutex_lock(&s->data_mutex);
@@ -251,6 +253,19 @@ static void wait_for_fds(TestServer *s)
g_assert_cmpint(s->fds_num, ==, s->memory.nregions);
g_mutex_unlock(&s->data_mutex);
+
+ got_region = false;
+ for (i = 0; i < s->memory.nregions; ++i) {
+ VhostUserMemoryRegion *reg = &s->memory.regions[i];
+ if (reg->guest_phys_addr == 0) {
+ got_region = true;
+ break;
+ }
+ }
+ if (!got_region) {
+ g_test_skip("No memory at address 0x0");
+ }
+ return got_region;
}
static void read_guest_mem_server(TestServer *s)
@@ -259,8 +274,6 @@ static void read_guest_mem_server(TestServer *s)
int i, j;
size_t size;
- wait_for_fds(s);
-
g_mutex_lock(&s->data_mutex);
/* iterate all regions */
@@ -582,8 +595,6 @@ static void write_guest_mem(TestServer *s, uint32_t seed)
int i, j;
size_t size;
- wait_for_fds(s);
-
/* iterate all regions */
for (i = 0; i < s->fds_num; i++) {
@@ -666,8 +677,13 @@ static void test_read_guest_mem(const void *arg)
init_virtio_dev(server, 1u << VIRTIO_NET_F_MAC);
+ if (!wait_for_fds(server)) {
+ goto exit;
+ }
+
read_guest_mem_server(server);
+exit:
uninit_virtio_dev(server);
qtest_quit(s);
@@ -694,8 +710,10 @@ static void test_migrate(void)
g_free(cmd);
init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
- init_virtio_dev(dest, 1u << VIRTIO_NET_F_MAC);
- wait_for_fds(s);
+ if (!wait_for_fds(s)) {
+ goto exit;
+ }
+
size = get_log_size(s);
g_assert_cmpint(size, ==, (2 * 1024 * 1024) / (VHOST_LOG_PAGE * 8));
@@ -704,6 +722,7 @@ static void test_migrate(void)
g_free(tmp);
to = qtest_init(cmd);
g_free(cmd);
+ init_virtio_dev(dest, 1u << VIRTIO_NET_F_MAC);
source = g_source_new(&test_migrate_source_funcs,
sizeof(TestMigrateSource));
@@ -743,15 +762,18 @@ static void test_migrate(void)
global_qtest = to;
qmp_eventwait("RESUME");
+ g_assert(wait_for_fds(s));
read_guest_mem_server(dest);
- uninit_virtio_dev(s);
uninit_virtio_dev(dest);
+ qtest_quit(to);
g_source_destroy(source);
g_source_unref(source);
- qtest_quit(to);
+exit:
+ uninit_virtio_dev(s);
+
test_server_free(dest);
qtest_quit(from);
test_server_free(s);
@@ -815,16 +837,20 @@ static void test_reconnect_subprocess(void)
g_free(cmd);
init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
- wait_for_fds(s);
+ if (!wait_for_fds(s)) {
+ goto exit;
+ }
+
wait_for_rings_started(s, 2);
/* reconnect */
s->fds_num = 0;
s->rings = 0;
g_idle_add(reconnect_cb, s);
- wait_for_fds(s);
+ g_assert(wait_for_fds(s));
wait_for_rings_started(s, 2);
+exit:
uninit_virtio_dev(s);
qtest_end();
@@ -853,9 +879,12 @@ static void test_connect_fail_subprocess(void)
g_free(cmd);
init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
- wait_for_fds(s);
+ if (!wait_for_fds(s)) {
+ goto exit;
+ }
wait_for_rings_started(s, 2);
+exit:
uninit_virtio_dev(s);
qtest_end();
@@ -883,9 +912,12 @@ static void test_flags_mismatch_subprocess(void)
g_free(cmd);
init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
- wait_for_fds(s);
+ if (!wait_for_fds(s)) {
+ goto exit;
+ }
wait_for_rings_started(s, 2);
+exit:
uninit_virtio_dev(s);
qtest_end();
--
1.8.3.1
next prev parent reply other threads:[~2019-01-21 18:06 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 18:05 [Qemu-devel] [PULL 00/49] Misc patches for 2019-01-21 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 01/49] scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1) Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 02/49] include: update Linux headers to 4.21-rc1/5.0-rc1 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 03/49] vhost-net: move stubs to a separate file Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 04/49] vhost-net-user: add stubs for when no virtio-net device is present Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 05/49] vhost: restrict Linux dependency to kernel vhost Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 06/49] vhost-net: compile it on all targets that have virtio-net Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 07/49] vhost-net: revamp configure logic Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 08/49] vhost-user-test: use g_cond_broadcast Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 09/49] vhost-user-test: signal data_cond when s->rings changes Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 10/49] vhost-user: support cross-endian vnet headers Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 11/49] vhost-user-test: support VHOST_USER_PROTOCOL_F_CROSS_ENDIAN Paolo Bonzini
2019-01-21 18:05 ` Paolo Bonzini [this message]
2019-01-21 18:05 ` [Qemu-devel] [PULL 13/49] vhost-user-test: reduce usage of global_qtest Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 14/49] vhost-user-test: create a main loop per TestServer Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 15/49] vhost-user-test: small changes to init_hugepagefs Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 16/49] vhost-user-test: create a temporary directory per TestServer Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 17/49] tap: flush STDOUT on newline Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 18/49] tests/hexloader-test: Don't pass -nographic to the QEMU under test Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 19/49] cpu-exec: add assert_no_pages_locked() after longjmp Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 20/49] cpu-exec: reset BQL after longjmp in cpu_exec_step_atomic Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 21/49] configure: Add a proper check for openpty() in libutil Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 22/49] cpus: ignore ESRCH in qemu_cpu_kick_thread() Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 23/49] elf: Add optional function ptr to load_elf() to parse ELF notes Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 24/49] elf-ops.h: Add get_elf_note_type() Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 25/49] pvh: Add x86/HVM direct boot ABI header file Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 26/49] pvh: Boot uncompressed kernel using direct boot ABI Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 27/49] pvh: load initrd and expose it through fw_cfg Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 28/49] linuxboot_dma: remove duplicate definitions of FW_CFG Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 29/49] linuxboot_dma: move common functions in a new header Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 30/49] hw/i386/pc: use PVH option rom Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 31/49] optionrom/pvh: load initrd from fw_cfg Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 32/49] i386: remove the new CPUID 'PCONFIG' from Icelake-Server CPU model Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 33/49] i386: remove the 'INTEL_PT' CPUID bit from named CPU models Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 34/49] Revert "i386: Add CPUID bit for PCONFIG" Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 35/49] target-i386: hvf: remove MPX support Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 36/49] contrib/elf2dmp: fix elf.h including Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 37/49] contrib/elf2dmp: use GLib in ELF processing Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 38/49] contrib/elf2dmp: use GLib in PDB processing Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 39/49] contrib/elf2dmp: fix structures definitions Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 41/49] configure: enable elf2dmp build for Windows hosts Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 42/49] monitor: do not use QTAILQ_FOREACH_SAFE across critical sections Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 43/49] crypto: finish removing TABs Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 44/49] ui: vnc: " Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 45/49] unify len and addr type for memory/address APIs Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 46/49] hw/core/loader.c: Read as long as possible in load_image_size() Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 47/49] i386: import & use bootparam.h Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 48/49] i386: allow to load initrd below 4 GB for recent linux Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 49/49] docker: disable Xen on CentOS 7 Paolo Bonzini
2019-01-24 12:07 ` Daniel P. Berrangé
2019-01-22 17:19 ` [Qemu-devel] [PULL 00/49] Misc patches for 2019-01-21 Peter Maydell
2019-01-23 11:06 ` Stefano Garzarella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548093980-43088-13-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).