From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 35/49] target-i386: hvf: remove MPX support
Date: Mon, 21 Jan 2019 19:06:06 +0100 [thread overview]
Message-ID: <1548093980-43088-36-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1548093980-43088-1-git-send-email-pbonzini@redhat.com>
MPX support is being phased out by Intel and actually I am not sure that
OS X has ever enabled it in XCR0. Drop it from the Hypervisor.framework
acceleration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/hvf/x86_cpuid.c | 18 +-----------------
1 file changed, 1 insertion(+), 17 deletions(-)
diff --git a/target/i386/hvf/x86_cpuid.c b/target/i386/hvf/x86_cpuid.c
index 9874a46..4d957fe 100644
--- a/target/i386/hvf/x86_cpuid.c
+++ b/target/i386/hvf/x86_cpuid.c
@@ -38,16 +38,6 @@ static uint64_t xgetbv(uint32_t xcr)
return (((uint64_t)edx) << 32) | eax;
}
-static bool vmx_mpx_supported()
-{
- uint64_t cap_exit, cap_entry;
-
- hv_vmx_read_capability(HV_VMX_CAP_ENTRY, &cap_entry);
- hv_vmx_read_capability(HV_VMX_CAP_EXIT, &cap_exit);
-
- return ((cap_exit & (1 << 23)) && (cap_entry & (1 << 16)));
-}
-
uint32_t hvf_get_supported_cpuid(uint32_t func, uint32_t idx,
int reg)
{
@@ -92,11 +82,8 @@ uint32_t hvf_get_supported_cpuid(uint32_t func, uint32_t idx,
CPUID_7_0_EBX_CLFLUSHOPT | CPUID_7_0_EBX_CLWB |
CPUID_7_0_EBX_AVX512DQ | CPUID_7_0_EBX_SHA_NI |
CPUID_7_0_EBX_AVX512BW | CPUID_7_0_EBX_AVX512VL |
- CPUID_7_0_EBX_INVPCID | CPUID_7_0_EBX_MPX;
+ CPUID_7_0_EBX_INVPCID;
- if (!vmx_mpx_supported()) {
- ebx &= ~CPUID_7_0_EBX_MPX;
- }
hv_vmx_read_capability(HV_VMX_CAP_PROCBASED2, &cap);
if (!(cap & CPU_BASED2_INVPCID)) {
ebx &= ~CPUID_7_0_EBX_INVPCID;
@@ -119,9 +106,6 @@ uint32_t hvf_get_supported_cpuid(uint32_t func, uint32_t idx,
XSTATE_BNDCSR_MASK | XSTATE_OPMASK_MASK |
XSTATE_ZMM_Hi256_MASK | XSTATE_Hi16_ZMM_MASK);
eax &= supp_xcr0;
- if (!vmx_mpx_supported()) {
- eax &= ~(XSTATE_BNDREGS_MASK | XSTATE_BNDCSR_MASK);
- }
} else if (idx == 1) {
hv_vmx_read_capability(HV_VMX_CAP_PROCBASED2, &cap);
eax &= CPUID_XSAVE_XSAVEOPT | CPUID_XSAVE_XGETBV1;
--
1.8.3.1
next prev parent reply other threads:[~2019-01-21 18:07 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 18:05 [Qemu-devel] [PULL 00/49] Misc patches for 2019-01-21 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 01/49] scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1) Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 02/49] include: update Linux headers to 4.21-rc1/5.0-rc1 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 03/49] vhost-net: move stubs to a separate file Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 04/49] vhost-net-user: add stubs for when no virtio-net device is present Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 05/49] vhost: restrict Linux dependency to kernel vhost Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 06/49] vhost-net: compile it on all targets that have virtio-net Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 07/49] vhost-net: revamp configure logic Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 08/49] vhost-user-test: use g_cond_broadcast Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 09/49] vhost-user-test: signal data_cond when s->rings changes Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 10/49] vhost-user: support cross-endian vnet headers Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 11/49] vhost-user-test: support VHOST_USER_PROTOCOL_F_CROSS_ENDIAN Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 12/49] vhost-user-test: skip if there is no memory at address 0 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 13/49] vhost-user-test: reduce usage of global_qtest Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 14/49] vhost-user-test: create a main loop per TestServer Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 15/49] vhost-user-test: small changes to init_hugepagefs Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 16/49] vhost-user-test: create a temporary directory per TestServer Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 17/49] tap: flush STDOUT on newline Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 18/49] tests/hexloader-test: Don't pass -nographic to the QEMU under test Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 19/49] cpu-exec: add assert_no_pages_locked() after longjmp Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 20/49] cpu-exec: reset BQL after longjmp in cpu_exec_step_atomic Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 21/49] configure: Add a proper check for openpty() in libutil Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 22/49] cpus: ignore ESRCH in qemu_cpu_kick_thread() Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 23/49] elf: Add optional function ptr to load_elf() to parse ELF notes Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 24/49] elf-ops.h: Add get_elf_note_type() Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 25/49] pvh: Add x86/HVM direct boot ABI header file Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 26/49] pvh: Boot uncompressed kernel using direct boot ABI Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 27/49] pvh: load initrd and expose it through fw_cfg Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 28/49] linuxboot_dma: remove duplicate definitions of FW_CFG Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 29/49] linuxboot_dma: move common functions in a new header Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 30/49] hw/i386/pc: use PVH option rom Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 31/49] optionrom/pvh: load initrd from fw_cfg Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 32/49] i386: remove the new CPUID 'PCONFIG' from Icelake-Server CPU model Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 33/49] i386: remove the 'INTEL_PT' CPUID bit from named CPU models Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 34/49] Revert "i386: Add CPUID bit for PCONFIG" Paolo Bonzini
2019-01-21 18:06 ` Paolo Bonzini [this message]
2019-01-21 18:06 ` [Qemu-devel] [PULL 36/49] contrib/elf2dmp: fix elf.h including Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 37/49] contrib/elf2dmp: use GLib in ELF processing Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 38/49] contrib/elf2dmp: use GLib in PDB processing Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 39/49] contrib/elf2dmp: fix structures definitions Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 41/49] configure: enable elf2dmp build for Windows hosts Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 42/49] monitor: do not use QTAILQ_FOREACH_SAFE across critical sections Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 43/49] crypto: finish removing TABs Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 44/49] ui: vnc: " Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 45/49] unify len and addr type for memory/address APIs Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 46/49] hw/core/loader.c: Read as long as possible in load_image_size() Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 47/49] i386: import & use bootparam.h Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 48/49] i386: allow to load initrd below 4 GB for recent linux Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 49/49] docker: disable Xen on CentOS 7 Paolo Bonzini
2019-01-24 12:07 ` Daniel P. Berrangé
2019-01-22 17:19 ` [Qemu-devel] [PULL 00/49] Misc patches for 2019-01-21 Peter Maydell
2019-01-23 11:06 ` Stefano Garzarella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548093980-43088-36-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).