From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/49] vhost-net-user: add stubs for when no virtio-net device is present
Date: Mon, 21 Jan 2019 19:05:35 +0100 [thread overview]
Message-ID: <1548093980-43088-5-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1548093980-43088-1-git-send-email-pbonzini@redhat.com>
hw/net/vhost_net.c needs functions that are declared in net/vhost-user.c: the
vhost-user code is always compiled into QEMU, only the constructor
net_init_vhost_user is unreachable. Also, net/vhost-user.c needs functions
declared in hw/virtio/vhost-stub.c even if no virtio device exists.
Break this dependency. First, add a minimal version of net/vhost-user.c,
with no functionality and no dependency on vhost code. Second, #ifdef out
the calls back to net/vhost-user.c from hw/net/vhost_net.c.
While at it, this patch fixes the CONFIG_VHOST_NET_USE*D* typo.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1543851204-41186-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 2 +-
hw/net/vhost_net.c | 4 ++++
net/Makefile.objs | 4 +++-
net/net.c | 2 +-
net/vhost-user-stub.c | 23 +++++++++++++++++++++++
5 files changed, 32 insertions(+), 3 deletions(-)
create mode 100644 net/vhost-user-stub.c
diff --git a/configure b/configure
index 12fd34f..73bbbd6 100755
--- a/configure
+++ b/configure
@@ -6555,7 +6555,7 @@ if test "$vhost_scsi" = "yes" ; then
echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
fi
if test "$vhost_net" = "yes" -a "$vhost_user" = "yes"; then
- echo "CONFIG_VHOST_NET_USED=y" >> $config_host_mak
+ echo "CONFIG_VHOST_NET_USER=y" >> $config_host_mak
fi
if test "$vhost_crypto" = "yes" ; then
echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index b901306..2a300ee 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -193,6 +193,7 @@ struct vhost_net *vhost_net_init(VhostNetOptions *options)
}
/* Set sane init value. Override when guest acks. */
+#ifdef CONFIG_VHOST_NET_USER
if (net->nc->info->type == NET_CLIENT_DRIVER_VHOST_USER) {
features = vhost_user_get_acked_features(net->nc);
if (~net->dev.features & features) {
@@ -202,6 +203,7 @@ struct vhost_net *vhost_net_init(VhostNetOptions *options)
goto fail;
}
}
+#endif
vhost_net_ack_features(net, features);
@@ -413,10 +415,12 @@ VHostNetState *get_vhost_net(NetClientState *nc)
case NET_CLIENT_DRIVER_TAP:
vhost_net = tap_get_vhost_net(nc);
break;
+#ifdef CONFIG_VHOST_NET_USER
case NET_CLIENT_DRIVER_VHOST_USER:
vhost_net = vhost_user_get_vhost_net(nc);
assert(vhost_net);
break;
+#endif
default:
break;
}
diff --git a/net/Makefile.objs b/net/Makefile.objs
index b2bf88a..df2b409 100644
--- a/net/Makefile.objs
+++ b/net/Makefile.objs
@@ -3,7 +3,9 @@ common-obj-y += socket.o
common-obj-y += dump.o
common-obj-y += eth.o
common-obj-$(CONFIG_L2TPV3) += l2tpv3.o
-common-obj-$(CONFIG_POSIX) += vhost-user.o
+common-obj-$(call land,$(CONFIG_VIRTIO_NET),$(CONFIG_VHOST_NET_USER)) += vhost-user.o
+common-obj-$(call land,$(call lnot,$(CONFIG_VIRTIO_NET)),$(CONFIG_VHOST_NET_USER)) += vhost-user-stub.o
+common-obj-$(CONFIG_ALL) += vhost-user-stub.o
common-obj-$(CONFIG_SLIRP) += slirp.o
common-obj-$(CONFIG_VDE) += vde.o
common-obj-$(CONFIG_NETMAP) += netmap.o
diff --git a/net/net.c b/net/net.c
index 3acbdcc..ca0e14c 100644
--- a/net/net.c
+++ b/net/net.c
@@ -961,7 +961,7 @@ static int (* const net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
[NET_CLIENT_DRIVER_BRIDGE] = net_init_bridge,
#endif
[NET_CLIENT_DRIVER_HUBPORT] = net_init_hubport,
-#ifdef CONFIG_VHOST_NET_USED
+#ifdef CONFIG_VHOST_NET_USER
[NET_CLIENT_DRIVER_VHOST_USER] = net_init_vhost_user,
#endif
#ifdef CONFIG_L2TPV3
diff --git a/net/vhost-user-stub.c b/net/vhost-user-stub.c
new file mode 100644
index 0000000..52ab4e1
--- /dev/null
+++ b/net/vhost-user-stub.c
@@ -0,0 +1,23 @@
+/*
+ * vhost-user-stub.c
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "clients.h"
+#include "net/vhost_net.h"
+#include "net/vhost-user.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+
+int net_init_vhost_user(const Netdev *netdev, const char *name,
+ NetClientState *peer, Error **errp)
+{
+ error_setg(errp, "vhost-user requires frontend driver virtio-net-*");
+ return -1;
+}
--
1.8.3.1
next prev parent reply other threads:[~2019-01-21 18:06 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 18:05 [Qemu-devel] [PULL 00/49] Misc patches for 2019-01-21 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 01/49] scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1) Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 02/49] include: update Linux headers to 4.21-rc1/5.0-rc1 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 03/49] vhost-net: move stubs to a separate file Paolo Bonzini
2019-01-21 18:05 ` Paolo Bonzini [this message]
2019-01-21 18:05 ` [Qemu-devel] [PULL 05/49] vhost: restrict Linux dependency to kernel vhost Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 06/49] vhost-net: compile it on all targets that have virtio-net Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 07/49] vhost-net: revamp configure logic Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 08/49] vhost-user-test: use g_cond_broadcast Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 09/49] vhost-user-test: signal data_cond when s->rings changes Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 10/49] vhost-user: support cross-endian vnet headers Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 11/49] vhost-user-test: support VHOST_USER_PROTOCOL_F_CROSS_ENDIAN Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 12/49] vhost-user-test: skip if there is no memory at address 0 Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 13/49] vhost-user-test: reduce usage of global_qtest Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 14/49] vhost-user-test: create a main loop per TestServer Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 15/49] vhost-user-test: small changes to init_hugepagefs Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 16/49] vhost-user-test: create a temporary directory per TestServer Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 17/49] tap: flush STDOUT on newline Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 18/49] tests/hexloader-test: Don't pass -nographic to the QEMU under test Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 19/49] cpu-exec: add assert_no_pages_locked() after longjmp Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 20/49] cpu-exec: reset BQL after longjmp in cpu_exec_step_atomic Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 21/49] configure: Add a proper check for openpty() in libutil Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 22/49] cpus: ignore ESRCH in qemu_cpu_kick_thread() Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 23/49] elf: Add optional function ptr to load_elf() to parse ELF notes Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 24/49] elf-ops.h: Add get_elf_note_type() Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 25/49] pvh: Add x86/HVM direct boot ABI header file Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 26/49] pvh: Boot uncompressed kernel using direct boot ABI Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 27/49] pvh: load initrd and expose it through fw_cfg Paolo Bonzini
2019-01-21 18:05 ` [Qemu-devel] [PULL 28/49] linuxboot_dma: remove duplicate definitions of FW_CFG Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 29/49] linuxboot_dma: move common functions in a new header Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 30/49] hw/i386/pc: use PVH option rom Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 31/49] optionrom/pvh: load initrd from fw_cfg Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 32/49] i386: remove the new CPUID 'PCONFIG' from Icelake-Server CPU model Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 33/49] i386: remove the 'INTEL_PT' CPUID bit from named CPU models Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 34/49] Revert "i386: Add CPUID bit for PCONFIG" Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 35/49] target-i386: hvf: remove MPX support Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 36/49] contrib/elf2dmp: fix elf.h including Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 37/49] contrib/elf2dmp: use GLib in ELF processing Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 38/49] contrib/elf2dmp: use GLib in PDB processing Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 39/49] contrib/elf2dmp: fix structures definitions Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 41/49] configure: enable elf2dmp build for Windows hosts Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 42/49] monitor: do not use QTAILQ_FOREACH_SAFE across critical sections Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 43/49] crypto: finish removing TABs Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 44/49] ui: vnc: " Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 45/49] unify len and addr type for memory/address APIs Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 46/49] hw/core/loader.c: Read as long as possible in load_image_size() Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 47/49] i386: import & use bootparam.h Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 48/49] i386: allow to load initrd below 4 GB for recent linux Paolo Bonzini
2019-01-21 18:06 ` [Qemu-devel] [PULL 49/49] docker: disable Xen on CentOS 7 Paolo Bonzini
2019-01-24 12:07 ` Daniel P. Berrangé
2019-01-22 17:19 ` [Qemu-devel] [PULL 00/49] Misc patches for 2019-01-21 Peter Maydell
2019-01-23 11:06 ` Stefano Garzarella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548093980-43088-5-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).