qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Jason J. Herne" <jjherne@linux.ibm.com>
To: qemu-devel@nongnu.org, qemu-s390x@nongnu.org, cohuck@redhat.com,
	pasic@linux.ibm.com, alifm@linux.ibm.com, borntraeger@de.ibm.com
Subject: [Qemu-devel] [PATCH 11/15] s390-bios: cio error handling
Date: Tue, 29 Jan 2019 08:29:18 -0500	[thread overview]
Message-ID: <1548768562-20007-12-git-send-email-jjherne@linux.ibm.com> (raw)
In-Reply-To: <1548768562-20007-1-git-send-email-jjherne@linux.ibm.com>

Add verbose error output for when unexpected i/o errors happen. This eases the
burden of debugging and reporting i/o errors. No error information is printed
in the success case, here is an example of what is output on error:

vfio-ccw device I/O error - Interrupt Response Block Data:
    Function Ctrl : [Start]
    Activity Ctrl : [Start-Pending]
    Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
    Device Status : [Unit-Check]
    Channel Status :
    cpa=: 0x0000000001e67098
    prev_ccw=: 0x0000000000000000
    this_ccw=: 0x0000000000000000

Sense Data (fmt 32-bytes):
    Sense Condition Flags : [Equipment-Check]
    Residual Count     =: 0x0000000000000000
    Phys Drive ID      =: 0x000000000000009e
    low cyl address    =: 0x0000000000000000
    head addr & hi cyl =: 0x0000000000000000
    format/message     =: 0x0000000000000008
    fmt-dependent[0-7] =: 0x0000000000000004
    fmt-dependent[8-15]=: 0xe561282305082fff
    prog action code   =: 0x0000000000000016
    Configuration info =: 0x00000000000040e0
    mcode / hi-cyl     =: 0x0000000000000000
    cyl & head addr [0]=: 0x0000000000000000
    cyl & head addr [1]=: 0x0000000000000000
    cyl & head addr [2]=: 0x0000000000000000

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>

# Conflicts:
#	pc-bios/s390-ccw/cio.c

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
 pc-bios/s390-ccw/cio.c  | 225 ++++++++++++++++++++++++++++++++++++++++++++++++
 pc-bios/s390-ccw/libc.h |  11 +++
 2 files changed, 236 insertions(+)

diff --git a/pc-bios/s390-ccw/cio.c b/pc-bios/s390-ccw/cio.c
index 63581c6..bd6051b 100644
--- a/pc-bios/s390-ccw/cio.c
+++ b/pc-bios/s390-ccw/cio.c
@@ -79,6 +79,228 @@ static bool irb_error(Irb *irb)
     return irb->scsw.dstat != (SCSW_DSTAT_DEVEND | SCSW_DSTAT_CHEND);
 }
 
+static void print_eckd_dasd_sense_data(sense_data_eckd_dasd *sd)
+{
+    char msgline[512];
+
+    if (sd->config_info & 0x8000) {
+        sclp_print("Eckd Dasd Sense Data (fmt 24-bytes):\n");
+    } else {
+        sclp_print("Eckd Dasd Sense Data (fmt 32-bytes):\n");
+    }
+
+    strcat(msgline, "    Sense Condition Flags :");
+    if (sd->status[0] & SNS_STAT0_CMD_REJECT) {
+        strcat(msgline, " [Cmd-Reject]");
+    }
+    if (sd->status[0] & SNS_STAT0_INTERVENTION_REQ) {
+        strcat(msgline, " [Intervention-Required]");
+    }
+    if (sd->status[0] & SNS_STAT0_BUS_OUT_CHECK) {
+        strcat(msgline, " [Bus-Out-Parity-Check]");
+    }
+    if (sd->status[0] & SNS_STAT0_EQUIPMENT_CHECK) {
+        strcat(msgline, " [Equipment-Check]");
+    }
+    if (sd->status[0] & SNS_STAT0_DATA_CHECK) {
+        strcat(msgline, " [Data-Check]");
+    }
+    if (sd->status[0] & SNS_STAT0_OVERRUN) {
+        strcat(msgline, " [Overrun]");
+    }
+    if (sd->status[0] & SNS_STAT0_INCOMPL_DOMAIN) {
+        strcat(msgline, " [Incomplete-Domain]");
+    }
+
+    if (sd->status[1] & SNS_STAT1_PERM_ERR) {
+        strcat(msgline, " [Permanent-Error]");
+    }
+    if (sd->status[1] & SNS_STAT1_INV_TRACK_FORMAT) {
+        strcat(msgline, " [Invalid-Track-Fmt]");
+    }
+    if (sd->status[1] & SNS_STAT1_EOC) {
+        strcat(msgline, " [End-of-Cyl]");
+    }
+    if (sd->status[1] & SNS_STAT1_MESSAGE_TO_OPER) {
+        strcat(msgline, " [Operator-Msg]");
+    }
+    if (sd->status[1] & SNS_STAT1_NO_REC_FOUND) {
+        strcat(msgline, " [No-Record-Found]");
+    }
+    if (sd->status[1] & SNS_STAT1_FILE_PROTECTED) {
+        strcat(msgline, " [File-Protected]");
+    }
+    if (sd->status[1] & SNS_STAT1_WRITE_INHIBITED) {
+        strcat(msgline, " [Write-Inhibited]");
+    }
+    if (sd->status[1] & SNS_STAT1_IMPRECISE_END) {
+        strcat(msgline, " [Imprecise-Ending]");
+    }
+
+    if (sd->status[2] & SNS_STAT2_REQ_INH_WRITE) {
+        strcat(msgline, " [Req-Inhibit-Write]");
+    }
+    if (sd->status[2] & SNS_STAT2_CORRECTABLE) {
+        strcat(msgline, " [Correctable-Data-Check]");
+    }
+    if (sd->status[2] & SNS_STAT2_FIRST_LOG_ERR) {
+        strcat(msgline, " [First-Error-Log]");
+    }
+    if (sd->status[2] & SNS_STAT2_ENV_DATA_PRESENT) {
+        strcat(msgline, " [Env-Data-Present]");
+    }
+    if (sd->status[2] & SNS_STAT2_IMPRECISE_END) {
+        strcat(msgline, " [Imprecise-End]");
+    }
+    strcat(msgline, "\n");
+    sclp_print(msgline);
+
+    print_int("    Residual Count     =", sd->res_count);
+    print_int("    Phys Drive ID      =", sd->phys_drive_id);
+    print_int("    low cyl address    =", sd->low_cyl_addr);
+    print_int("    head addr & hi cyl =", sd->head_high_cyl_addr);
+    print_int("    format/message     =", sd->fmt_msg);
+    print_int("    fmt-dependent[0-7] =", sd->fmt_dependent_info[0]);
+    print_int("    fmt-dependent[8-15]=", sd->fmt_dependent_info[1]);
+    print_int("    prog action code   =", sd->program_action_code);
+    print_int("    Configuration info =", sd->config_info);
+    print_int("    mcode / hi-cyl     =", sd->mcode_hicyl);
+    print_int("    cyl & head addr [0]=", sd->cyl_head_addr[0]);
+    print_int("    cyl & head addr [1]=", sd->cyl_head_addr[1]);
+    print_int("    cyl & head addr [2]=", sd->cyl_head_addr[2]);
+}
+
+static void print_irb_err(Irb *irb)
+{
+    Ccw0 *this_ccw = u32toptr(irb->scsw.cpa);
+    Ccw0 *prev_ccw = u32toptr(irb->scsw.cpa - 8);
+    char msgline[256];
+
+    sclp_print("vfio-ccw device I/O error - Interrupt Response Block Data:\n");
+
+    strcat(msgline, "    Function Ctrl :");
+    if (irb->scsw.ctrl & SCSW_FCTL_START_FUNC) {
+        strcat(msgline, " [Start]");
+    }
+    if (irb->scsw.ctrl & SCSW_FCTL_HALT_FUNC) {
+        strcat(msgline, " [Halt]");
+    }
+    if (irb->scsw.ctrl & SCSW_FCTL_CLEAR_FUNC) {
+        strcat(msgline, " [Clear]");
+    }
+    strcat(msgline, "\n");
+    sclp_print(msgline);
+
+    msgline[0] = '\0';
+    strcat(msgline, "    Activity Ctrl :");
+    if (irb->scsw.ctrl & SCSW_ACTL_RESUME_PEND) {
+        strcat(msgline, " [Resume-Pending]");
+    }
+    if (irb->scsw.ctrl & SCSW_ACTL_START_PEND) {
+        strcat(msgline, " [Start-Pending]");
+    }
+    if (irb->scsw.ctrl & SCSW_ACTL_HALT_PEND) {
+        strcat(msgline, " [Halt-Pending]");
+    }
+    if (irb->scsw.ctrl & SCSW_ACTL_CLEAR_PEND) {
+        strcat(msgline, " [Clear-Pending]");
+    }
+    if (irb->scsw.ctrl & SCSW_ACTL_CH_ACTIVE) {
+        strcat(msgline, " [Channel-Active]");
+    }
+    if (irb->scsw.ctrl & SCSW_ACTL_DEV_ACTIVE) {
+        strcat(msgline, " [Device-Active]");
+    }
+    if (irb->scsw.ctrl & SCSW_ACTL_SUSPENDED) {
+        strcat(msgline, " [Suspended]");
+    }
+    strcat(msgline, "\n");
+    sclp_print(msgline);
+
+    msgline[0] = '\0';
+    strcat(msgline, "    Status Ctrl :");
+    if (irb->scsw.ctrl & SCSW_SCTL_ALERT) {
+        strcat(msgline, " [Alert]");
+    }
+    if (irb->scsw.ctrl & SCSW_SCTL_INTERMED) {
+        strcat(msgline, " [Intermediate]");
+    }
+    if (irb->scsw.ctrl & SCSW_SCTL_PRIMARY) {
+        strcat(msgline, " [Primary]");
+    }
+    if (irb->scsw.ctrl & SCSW_SCTL_SECONDARY) {
+        strcat(msgline, " [Secondary]");
+    }
+    if (irb->scsw.ctrl & SCSW_SCTL_STATUS_PEND) {
+        strcat(msgline, " [Status-Pending]");
+    }
+
+    strcat(msgline, "\n");
+    sclp_print(msgline);
+
+    msgline[0] = '\0';
+    strcat(msgline, "    Device Status :");
+    if (irb->scsw.dstat & SCSW_DSTAT_ATTN) {
+        strcat(msgline, " [Attention]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_STATMOD) {
+        strcat(msgline, " [Status-Modifier]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_CUEND) {
+        strcat(msgline, " [Ctrl-Unit-End]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_BUSY) {
+        strcat(msgline, " [Busy]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_CHEND) {
+        strcat(msgline, " [Channel-End]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_DEVEND) {
+        strcat(msgline, " [Device-End]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_UCHK) {
+        strcat(msgline, " [Unit-Check]");
+    }
+    if (irb->scsw.dstat & SCSW_DSTAT_UEXCP) {
+        strcat(msgline, " [Unit-Exception]");
+    }
+    strcat(msgline, "\n");
+    sclp_print(msgline);
+
+    msgline[0] = '\0';
+    strcat(msgline, "    Channel Status :");
+    if (irb->scsw.cstat & SCSW_CSTAT_PCINT) {
+        strcat(msgline, " [Program-Ctrl-Interruption]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_BADLEN) {
+        strcat(msgline, " [Incorrect-Length]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_PROGCHK) {
+        strcat(msgline, " [Program-Check]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_PROTCHK) {
+        strcat(msgline, " [Protection-Check]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_CHDCHK) {
+        strcat(msgline, " [Channel-Data-Check]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_CHCCHK) {
+        strcat(msgline, " [Channel-Ctrl-Check]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_ICCHK) {
+        strcat(msgline, " [Interface-Ctrl-Check]");
+    }
+    if (irb->scsw.cstat & SCSW_CSTAT_CHAINCHK) {
+        strcat(msgline, " [Chaining-Check]");
+    }
+    strcat(msgline, "\n");
+    sclp_print(msgline);
+
+    print_int("    cpa=", irb->scsw.cpa);
+    print_int("    prev_ccw=", *((uint64_t *)prev_ccw));
+    print_int("    this_ccw=", *((uint64_t *)this_ccw));
+}
+
 /*
  * Executes a channel program at a given subchannel. The request to run the
  * channel program is sent to the subchannel, we then wait for the interrupt
@@ -148,6 +370,9 @@ int do_cio(SubChannelId schid, uint32_t ccw_addr, int fmt)
             continue;
         }
 
+        print_irb_err(&irb);
+        basic_sense(schid, &sd, sizeof(sd));
+        print_eckd_dasd_sense_data(&sd);
         break;
     }
 
diff --git a/pc-bios/s390-ccw/libc.h b/pc-bios/s390-ccw/libc.h
index e198f0b..01b5de0 100644
--- a/pc-bios/s390-ccw/libc.h
+++ b/pc-bios/s390-ccw/libc.h
@@ -79,6 +79,17 @@ static inline size_t strlen(const char *str)
     return i;
 }
 
+static inline char *strcat(char *dest, const char *src)
+{
+    int i;
+    char *dest_end = dest + strlen(dest);
+
+    for (i = 0; i <= strlen(src); i++) {
+        dest_end[i] = src[i];
+    }
+    return dest;
+}
+
 static inline int isdigit(int c)
 {
     return (c >= '0') && (c <= '9');
-- 
2.7.4

  parent reply	other threads:[~2019-01-29 13:30 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 13:29 [Qemu-devel] [PATCH 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
2019-01-29 13:29 ` [Qemu-devel] [PATCH 01/15] s390 vfio-ccw: Add bootindex property and IPLB data Jason J. Herne
2019-01-30 16:56   ` Cornelia Huck
2019-01-30 20:12     ` Jason J. Herne
2019-01-30 22:21   ` Farhan Ali
2019-02-08 16:07     ` Jason J. Herne
2019-01-31 18:20   ` Cornelia Huck
2019-02-04 10:26   ` Cornelia Huck
2019-02-13 13:41     ` Jason J. Herne
2019-02-13 14:52       ` Cornelia Huck
2019-02-06 11:30   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-02-08 16:04     ` Jason J. Herne
2019-02-11  8:15       ` Cornelia Huck
2019-02-11  8:39       ` Thomas Huth
2019-01-29 13:29 ` [Qemu-devel] [PATCH 02/15] s390-bios: decouple cio setup from virtio Jason J. Herne
2019-01-30 22:23   ` Farhan Ali
2019-02-04 10:28   ` Cornelia Huck
2019-02-05  9:55   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-01-29 13:29 ` [Qemu-devel] [PATCH 03/15] s390-bios: decouple common boot logic " Jason J. Herne
2019-01-30 22:27   ` Farhan Ali
2019-02-04 10:31   ` Cornelia Huck
2019-01-29 13:29 ` [Qemu-devel] [PATCH 04/15] s390-bios: Extend find_dev() for non-virtio devices Jason J. Herne
2019-02-04 10:33   ` Cornelia Huck
2019-02-11 16:38   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-02-13 13:59     ` Jason J. Herne
2019-03-04 19:23       ` Thomas Huth
2019-01-29 13:29 ` [Qemu-devel] [PATCH 05/15] s390-bios: Factor finding boot device out of virtio code path Jason J. Herne
2019-01-31 13:44   ` Farhan Ali
2019-02-04 10:45   ` Cornelia Huck
2019-02-11 17:57     ` Jason J. Herne
2019-02-12  9:32       ` Cornelia Huck
2019-01-29 13:29 ` [Qemu-devel] [PATCH 06/15] s390-bios: Clean up cio.h Jason J. Herne
2019-01-31 14:23   ` Farhan Ali
2019-02-04 10:48   ` Cornelia Huck
2019-02-12 12:32     ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-01-29 13:29 ` [Qemu-devel] [PATCH 07/15] s390-bios: Decouple channel i/o logic from virtio Jason J. Herne
2019-01-31 14:38   ` Farhan Ali
2019-01-31 14:45     ` Jason J. Herne
2019-02-04 10:57   ` Cornelia Huck
2019-02-13 14:40     ` Jason J. Herne
2019-01-29 13:29 ` [Qemu-devel] [PATCH 08/15] s390-bios: Map low core memory Jason J. Herne
2019-02-12 12:47   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-02-18 15:40     ` Jason J. Herne
2019-02-18 15:49       ` Cornelia Huck
2019-02-18 16:52       ` Thomas Huth
2019-01-29 13:29 ` [Qemu-devel] [PATCH 09/15] s390-bios: ptr2u32 and u32toptr Jason J. Herne
2019-02-04 11:03   ` Cornelia Huck
2019-02-12 12:50   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-01-29 13:29 ` [Qemu-devel] [PATCH 10/15] s390-bios: Support for running format-0/1 channel programs Jason J. Herne
2019-01-31 17:31   ` Farhan Ali
2019-02-04 11:13     ` Cornelia Huck
2019-02-04 19:29       ` Farhan Ali
2019-02-05 10:18         ` Cornelia Huck
2019-02-12 13:10           ` Halil Pasic
2019-02-27 13:35           ` Jason J. Herne
2019-02-27 14:07             ` Cornelia Huck
2019-02-27 13:32       ` Jason J. Herne
2019-02-27 14:06         ` Cornelia Huck
2019-02-04 11:24   ` Cornelia Huck
2019-02-21 18:01     ` Jason J. Herne
2019-02-22  8:35       ` Cornelia Huck
2019-01-29 13:29 ` Jason J. Herne [this message]
2019-02-04 11:41   ` [Qemu-devel] [PATCH 11/15] s390-bios: cio error handling Cornelia Huck
2019-02-28 15:59     ` Jason J. Herne
2019-02-28 16:11       ` Cornelia Huck
2019-01-29 13:29 ` [Qemu-devel] [PATCH 12/15] s390-bios: Refactor virtio to run channel programs via cio Jason J. Herne
2019-02-04 11:44   ` Cornelia Huck
2019-02-25 13:20     ` Jason J. Herne
2019-02-25 17:07       ` Cornelia Huck
2019-01-29 13:29 ` [Qemu-devel] [PATCH 13/15] s390-bios: Use control unit type to determine boot method Jason J. Herne
2019-02-04 11:46   ` Cornelia Huck
2019-01-29 13:29 ` [Qemu-devel] [PATCH 14/15] s390-bios: Add channel command codes/structs needed for dasd-ipl Jason J. Herne
2019-02-04 11:47   ` Cornelia Huck
2019-01-29 13:29 ` [Qemu-devel] [PATCH 15/15] s390-bios: Support booting from real dasd device Jason J. Herne
2019-01-31 18:23   ` Cornelia Huck
2019-02-04 12:02   ` Cornelia Huck
2019-02-19 14:57     ` Jason J. Herne
2019-02-21  2:52   ` [Qemu-devel] [qemu-s390x] " Eric Farman
2019-02-21 13:22     ` Jason J. Herne
2019-01-29 16:40 ` [Qemu-devel] [qemu-s390x] [PATCH 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
2019-01-31 18:10 ` [Qemu-devel] " no-reply
  -- strict thread matches above, loose matches on Subject: below --
2018-12-12 14:11 Jason J. Herne
2018-12-12 14:11 ` [Qemu-devel] [PATCH 11/15] s390-bios: cio error handling Jason J. Herne
2018-12-13 17:11   ` Farhan Ali
2018-12-13 17:26   ` Cornelia Huck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548768562-20007-12-git-send-email-jjherne@linux.ibm.com \
    --to=jjherne@linux.ibm.com \
    --cc=alifm@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=pasic@linux.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).