From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 06/77] vhost-user-test: reduce usage of global_qtest
Date: Mon, 4 Feb 2019 19:35:08 +0100 [thread overview]
Message-ID: <1549305379-51117-7-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1549305379-51117-1-git-send-email-pbonzini@redhat.com>
Whenever the code can run on multiple QTestStates, use them explicitly instead of
global_qtest.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-12-git-send-email-pbonzini@redhat.com>
---
tests/vhost-user-test.c | 38 +++++++++++++++++---------------------
1 file changed, 17 insertions(+), 21 deletions(-)
diff --git a/tests/vhost-user-test.c b/tests/vhost-user-test.c
index a0da5c3..7d5f234 100644
--- a/tests/vhost-user-test.c
+++ b/tests/vhost-user-test.c
@@ -187,12 +187,12 @@ static char *get_qemu_cmd(TestServer *s,
}
}
-static void init_virtio_dev(TestServer *s, uint32_t features_mask)
+static void init_virtio_dev(QTestState *qts, TestServer *s, uint32_t features_mask)
{
uint32_t features;
int i;
- s->bus = qpci_init_pc(global_qtest, NULL);
+ s->bus = qpci_init_pc(qts, NULL);
g_assert_nonnull(s->bus);
s->dev = qvirtio_pci_device_find(s->bus, VIRTIO_ID_NET);
@@ -203,7 +203,7 @@ static void init_virtio_dev(TestServer *s, uint32_t features_mask)
qvirtio_set_acknowledge(&s->dev->vdev);
qvirtio_set_driver(&s->dev->vdev);
- s->alloc = pc_alloc_init(global_qtest);
+ s->alloc = pc_alloc_init(qts);
for (i = 0; i < s->queues * 2; i++) {
s->vq[i] = qvirtqueue_setup(&s->dev->vdev, s->alloc, i);
@@ -265,7 +265,7 @@ static bool wait_for_fds(TestServer *s)
return got_region;
}
-static void read_guest_mem_server(TestServer *s)
+static void read_guest_mem_server(QTestState *qts, TestServer *s)
{
uint8_t *guest_mem;
int i, j;
@@ -293,7 +293,7 @@ static void read_guest_mem_server(TestServer *s)
guest_mem += (s->memory.regions[i].mmap_offset / sizeof(*guest_mem));
for (j = 0; j < 1024; j++) {
- uint32_t a = readb(s->memory.regions[i].guest_phys_addr + j);
+ uint32_t a = qtest_readb(qts, s->memory.regions[i].guest_phys_addr + j);
uint32_t b = guest_mem[j];
g_assert_cmpint(a, ==, b);
@@ -670,13 +670,13 @@ static void test_read_guest_mem(const void *arg)
s = qtest_start(qemu_cmd);
g_free(qemu_cmd);
- init_virtio_dev(server, 1u << VIRTIO_NET_F_MAC);
+ init_virtio_dev(global_qtest, server, 1u << VIRTIO_NET_F_MAC);
if (!wait_for_fds(server)) {
goto exit;
}
- read_guest_mem_server(server);
+ read_guest_mem_server(global_qtest, server);
exit:
uninit_virtio_dev(server);
@@ -690,7 +690,7 @@ static void test_migrate(void)
TestServer *s = test_server_new("src");
TestServer *dest = test_server_new("dest");
char *uri = g_strdup_printf("%s%s", "unix:", dest->mig_path);
- QTestState *global = global_qtest, *from, *to;
+ QTestState *from, *to;
GSource *source;
gchar *cmd, *tmp;
QDict *rsp;
@@ -704,7 +704,7 @@ static void test_migrate(void)
from = qtest_start(cmd);
g_free(cmd);
- init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
+ init_virtio_dev(from, s, 1u << VIRTIO_NET_F_MAC);
if (!wait_for_fds(s)) {
goto exit;
}
@@ -717,7 +717,7 @@ static void test_migrate(void)
g_free(tmp);
to = qtest_init(cmd);
g_free(cmd);
- init_virtio_dev(dest, 1u << VIRTIO_NET_F_MAC);
+ init_virtio_dev(to, dest, 1u << VIRTIO_NET_F_MAC);
source = g_source_new(&test_migrate_source_funcs,
sizeof(TestMigrateSource));
@@ -753,12 +753,10 @@ static void test_migrate(void)
qobject_unref(rsp);
qmp_eventwait("STOP");
+ qtest_qmp_eventwait(to, "RESUME");
- global_qtest = to;
- qmp_eventwait("RESUME");
-
- g_assert(wait_for_fds(s));
- read_guest_mem_server(dest);
+ g_assert(wait_for_fds(dest));
+ read_guest_mem_server(to, dest);
uninit_virtio_dev(dest);
qtest_quit(to);
@@ -773,8 +771,6 @@ exit:
qtest_quit(from);
test_server_free(s);
g_free(uri);
-
- global_qtest = global;
}
static void wait_for_rings_started(TestServer *s, size_t count)
@@ -831,7 +827,7 @@ static void test_reconnect_subprocess(void)
qtest_start(cmd);
g_free(cmd);
- init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
+ init_virtio_dev(global_qtest, s, 1u << VIRTIO_NET_F_MAC);
if (!wait_for_fds(s)) {
goto exit;
}
@@ -873,7 +869,7 @@ static void test_connect_fail_subprocess(void)
qtest_start(cmd);
g_free(cmd);
- init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
+ init_virtio_dev(global_qtest, s, 1u << VIRTIO_NET_F_MAC);
if (!wait_for_fds(s)) {
goto exit;
}
@@ -906,7 +902,7 @@ static void test_flags_mismatch_subprocess(void)
qtest_start(cmd);
g_free(cmd);
- init_virtio_dev(s, 1u << VIRTIO_NET_F_MAC);
+ init_virtio_dev(global_qtest, s, 1u << VIRTIO_NET_F_MAC);
if (!wait_for_fds(s)) {
goto exit;
}
@@ -957,7 +953,7 @@ static void test_multiqueue(void)
qtest_start(cmd);
g_free(cmd);
- init_virtio_dev(s, features_mask);
+ init_virtio_dev(global_qtest, s, features_mask);
wait_for_rings_started(s, s->queues * 2);
--
1.8.3.1
next prev parent reply other threads:[~2019-02-04 18:36 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 18:35 [Qemu-devel] [PULL 00/77] Misc patches for 2019-02-04 Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 01/77] vhost-user-test: use g_cond_broadcast Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 02/77] vhost-user-test: signal data_cond when s->rings changes Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 03/77] vhost-user: support cross-endian vnet headers Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 04/77] vhost-user-test: support VHOST_USER_PROTOCOL_F_CROSS_ENDIAN Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 05/77] vhost-user-test: skip if there is no memory at address 0 Paolo Bonzini
2019-02-04 18:35 ` Paolo Bonzini [this message]
2019-02-04 18:35 ` [Qemu-devel] [PULL 07/77] tap: flush STDOUT on newline Paolo Bonzini
2019-02-05 20:24 ` Philippe Mathieu-Daudé
2019-02-04 18:35 ` [Qemu-devel] [PULL 08/77] cpu-exec: add assert_no_pages_locked() after longjmp Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 09/77] cpu-exec: reset BQL after longjmp in cpu_exec_step_atomic Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 10/77] configure: Add a proper check for openpty() in libutil Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 11/77] cpus: ignore ESRCH in qemu_cpu_kick_thread() Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 12/77] elf: Add optional function ptr to load_elf() to parse ELF notes Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 13/77] elf-ops.h: Add get_elf_note_type() Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 14/77] pvh: Add x86/HVM direct boot ABI header file Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 15/77] pvh: Boot uncompressed kernel using direct boot ABI Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 16/77] pvh: load initrd and expose it through fw_cfg Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 17/77] linuxboot_dma: remove duplicate definitions of FW_CFG Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 18/77] linuxboot_dma: move common functions in a new header Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 19/77] optionrom: add new PVH option rom Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 20/77] hw/i386/pc: use " Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 21/77] optionrom/pvh: load initrd from fw_cfg Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 22/77] hw/i386/pc: enable PVH only for machine type >= 4.0 Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 23/77] i386: remove the new CPUID 'PCONFIG' from Icelake-Server CPU model Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 24/77] i386: remove the 'INTEL_PT' CPUID bit from named CPU models Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 25/77] Revert "i386: Add CPUID bit for PCONFIG" Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 26/77] target-i386: hvf: remove MPX support Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 27/77] contrib/elf2dmp: fix elf.h including Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 28/77] contrib/elf2dmp: use GLib in ELF processing Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 29/77] contrib/elf2dmp: use GLib in PDB processing Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 30/77] contrib/elf2dmp: fix structures definitions Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 32/77] configure: enable elf2dmp build for Windows hosts Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 33/77] monitor: do not use QTAILQ_FOREACH_SAFE across critical sections Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 34/77] crypto: finish removing TABs Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 35/77] ui: vnc: " Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 36/77] unify len and addr type for memory/address APIs Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 37/77] hw/core/loader.c: Read as long as possible in load_image_size() Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 38/77] i386: import & use bootparam.h Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 39/77] i386: allow to load initrd below 4 GB for recent linux Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 40/77] docker: adjust Xen repository for CentOS 7 Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 41/77] i386: hvf: Don't miss 16-bit displacement Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 42/77] gdbstub: Fix i386/x86_64 machine description and add control registers Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 43/77] scsi-generic: avoid possible out-of-bounds access to r->buf Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 44/77] Remove deprecated -enable-hax option Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 45/77] qemu-options: Remove deprecated "-virtioconsole" option Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 46/77] arm: disable CONFIG_SERIAL_ISA Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 47/77] ide: split ioport registration to a separate file Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 48/77] vfio: move conditional up to hw/Makefile.objs Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 49/77] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 50/77] build: actually use CONFIG_PAM Paolo Bonzini
2019-02-04 19:34 ` Philippe Mathieu-Daudé
2019-02-04 18:35 ` [Qemu-devel] [PULL 51/77] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 52/77] hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 53/77] hw/m68k/Makefile.objs: Conditionally build boards Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 54/77] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 55/77] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 56/77] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Paolo Bonzini
2019-02-04 18:35 ` [Qemu-devel] [PULL 57/77] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 58/77] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 59/77] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 60/77] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 61/77] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 62/77] hw/nios2/Makefile.objs: Conditionally build nios2 Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 63/77] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 64/77] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 65/77] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 66/77] hw/cris/Makefile.objs: Create CONFIG_* for cris Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 67/77] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 68/77] hw/moxie/Makefile.objs: Conditionally build moxie Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 69/77] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 70/77] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 71/77] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 72/77] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 73/77] i386: hvf: Fix smp boot hangs Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 74/77] pc: Use hotplug_handler_(plug|unplug|unplug_request) Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 75/77] scsi-disk: Convert from DPRINTF() macro to trace events Paolo Bonzini
2019-02-04 18:36 ` [Qemu-devel] [PULL 77/77] queue: fix QTAILQ_FOREACH_REVERSE_SAFE Paolo Bonzini
2019-02-05 9:35 ` [Qemu-devel] [PULL 00/77] Misc patches for 2019-02-04 Peter Maydell
2019-02-05 11:27 ` Paolo Bonzini
2019-02-05 12:45 ` Peter Maydell
2019-02-05 14:34 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1549305379-51117-7-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).