qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: thuth@redhat.com, lviver@redhat.com
Subject: [Qemu-devel] [PULL 38/57] tests/libqos: support multiqueue for virtio-net
Date: Thu,  7 Mar 2019 18:29:45 +0100	[thread overview]
Message-ID: <1551979804-6060-39-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1551979804-6060-1-git-send-email-pbonzini@redhat.com>

Initialize the additional virtqueues if they are supported.
This is needed to switch vhost-user-test's multiqueue test
to the virtio-net qgraph.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 tests/libqos/virtio-net.c | 21 +++++++++++++++++----
 tests/libqos/virtio-net.h |  4 ++--
 tests/virtio-net-test.c   |  6 +++---
 3 files changed, 22 insertions(+), 9 deletions(-)

diff --git a/tests/libqos/virtio-net.c b/tests/libqos/virtio-net.c
index 3ddfbdc..61c5617 100644
--- a/tests/libqos/virtio-net.c
+++ b/tests/libqos/virtio-net.c
@@ -27,14 +27,19 @@ static QGuestAllocator *alloc;
 
 static void virtio_net_cleanup(QVirtioNet *interface)
 {
-    qvirtqueue_cleanup(interface->vdev->bus, interface->rx, alloc);
-    qvirtqueue_cleanup(interface->vdev->bus, interface->tx, alloc);
+    int i;
+
+    for (i = 0; i < interface->n_queues; i++) {
+        qvirtqueue_cleanup(interface->vdev->bus, interface->queues[i], alloc);
+    }
+    g_free(interface->queues);
 }
 
 static void virtio_net_setup(QVirtioNet *interface)
 {
     QVirtioDevice *vdev = interface->vdev;
     uint64_t features;
+    int i;
 
     features = qvirtio_get_features(vdev);
     features &= ~(QVIRTIO_F_BAD_FEATURE |
@@ -42,8 +47,16 @@ static void virtio_net_setup(QVirtioNet *interface)
                   (1u << VIRTIO_RING_F_EVENT_IDX));
     qvirtio_set_features(vdev, features);
 
-    interface->rx = qvirtqueue_setup(vdev, alloc, 0);
-    interface->tx = qvirtqueue_setup(vdev, alloc, 1);
+    if (features & (1u << VIRTIO_NET_F_MQ)) {
+        interface->n_queues = qvirtio_config_readw(vdev, 8) * 2;
+    } else {
+        interface->n_queues = 2;
+    }
+
+    interface->queues = g_new(QVirtQueue *, interface->n_queues);
+    for (i = 0; i < interface->n_queues; i++) {
+        interface->queues[i] = qvirtqueue_setup(vdev, alloc, i);
+    }
     qvirtio_set_driver_ok(vdev);
 }
 
diff --git a/tests/libqos/virtio-net.h b/tests/libqos/virtio-net.h
index e6905cd..28238a1 100644
--- a/tests/libqos/virtio-net.h
+++ b/tests/libqos/virtio-net.h
@@ -26,8 +26,8 @@ typedef struct QVirtioNetDevice QVirtioNetDevice;
 
 struct QVirtioNet {
     QVirtioDevice *vdev;
-    QVirtQueue *rx;
-    QVirtQueue *tx;
+    int n_queues;
+    QVirtQueue **queues;
 };
 
 struct QVirtioNetPCI {
diff --git a/tests/virtio-net-test.c b/tests/virtio-net-test.c
index 2d3630c..c58e670 100644
--- a/tests/virtio-net-test.c
+++ b/tests/virtio-net-test.c
@@ -136,8 +136,8 @@ static void send_recv_test(void *obj, void *data, QGuestAllocator *t_alloc)
 {
     QVirtioNet *net_if = obj;
     QVirtioDevice *dev = net_if->vdev;
-    QVirtQueue *rx = net_if->rx;
-    QVirtQueue *tx = net_if->tx;
+    QVirtQueue *rx = net_if->queues[0];
+    QVirtQueue *tx = net_if->queues[1];
     int *sv = data;
 
     rx_test(dev, t_alloc, rx, sv[0]);
@@ -148,7 +148,7 @@ static void stop_cont_test(void *obj, void *data, QGuestAllocator *t_alloc)
 {
     QVirtioNet *net_if = obj;
     QVirtioDevice *dev = net_if->vdev;
-    QVirtQueue *rx = net_if->rx;
+    QVirtQueue *rx = net_if->queues[0];
     int *sv = data;
 
     rx_stop_cont_test(dev, t_alloc, rx, sv[0]);
-- 
1.8.3.1

  parent reply	other threads:[~2019-03-07 17:30 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-07 17:29 [Qemu-devel] [PULL 00/57] qgraph merge Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 01/57] chardev-socket: do not blindly reset handlers when switching GMainContext Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 02/57] tests/libqos: introduce virtio_start_device Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 03/57] tests/libqos: rename qpci_init_pc and qpci_init_spapr functions Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 04/57] tests/libqos: embed allocators instead of malloc-ing them separately Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 05/57] tests: qgraph API for the qtest driver framework Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 06/57] tests/libqos: pci-pc driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 07/57] tests/libqos: x86_64/pc machine node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 08/57] tests/libqos: sdhci driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 09/57] tests/libqos: arm/raspi2 machine node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 10/57] tests/libqos: arm/smdkc210 " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 11/57] tests/libqos: arm/sabrelite " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 12/57] tests/libqos: arm/xilinx-zynq-a9 " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 13/57] tests/libqos: aarch64/xlnx-zcu102 " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 14/57] qos-test: sdhci test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 15/57] tests/qgraph: add generic PCI testcases Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 16/57] tests/libqos: pci-spapr driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 17/57] tests/qgraph: ppc64/pseries machine node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 18/57] tests/libqos: has_buggy_msi flag Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 19/57] tests/libqos: e1000e driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 20/57] qos-test: e1000e test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 21/57] tests/libqos: virtio-pci driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 22/57] tests/libqos: remove global_qtest from virtio endianness checks Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 23/57] tests/libqos: virtio-mmio driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 24/57] tests/libqos: arm/virt machine node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 25/57] tests/qgraph: add generic virtio testcases Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 26/57] tests/libqos: virtio-serial driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 27/57] qos-test: virtio-console and virtio-serial test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 28/57] tests/libqos: virtio-9p driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 29/57] qos-test: virtio-9p test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 30/57] tests/libqos: virtio-balloon driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 31/57] tests/qgraph: remove virtio-balloon-test Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 32/57] tests/libqos: virtio-rng driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 33/57] qos-test: virtio-rng test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 34/57] tests/libqos: virtio-blk driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 35/57] qos-test: virtio-blk test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 36/57] tests/libqos: virtio-net driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 37/57] qos-test: virtio-net test node Paolo Bonzini
2019-03-07 17:29 ` Paolo Bonzini [this message]
2019-03-07 17:29 ` [Qemu-devel] [PULL 39/57] vhost-user-test: always use 256 MiB of guest memory Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 40/57] qos-test: vhost-user test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 41/57] tests/libqos: virtio-scsi driver and interface nodes Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 42/57] qos-test: virtio-scsi test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 43/57] tests/libqos: remove pre-qgraph QVirtioPCIDevice API Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 44/57] tests: move virtio entirely to qos-test Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 45/57] qos-test: ac97 test node Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 46/57] qos-test: tpci200 " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 47/57] qos-test: ipoctal232 " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 48/57] qos-test: ne2k_pci " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 49/57] qos-test: nvme " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 50/57] qos-test: pcnet " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 51/57] qos-test: spapr-phb " Paolo Bonzini
2019-03-07 17:29 ` [Qemu-devel] [PULL 52/57] qos-test: usb-hcd-ohci " Paolo Bonzini
2019-03-07 17:30 ` [Qemu-devel] [PULL 53/57] qos-test: vmxnet3 " Paolo Bonzini
2019-03-07 17:30 ` [Qemu-devel] [PULL 54/57] qos-test: es1370 " Paolo Bonzini
2019-03-07 17:30 ` [Qemu-devel] [PULL 55/57] qos-test: eepro100 " Paolo Bonzini
2019-03-07 17:30 ` [Qemu-devel] [PULL 56/57] qos-test: e1000 " Paolo Bonzini
2019-03-07 17:30 ` [Qemu-devel] [PULL 57/57] qos-test: megasas " Paolo Bonzini
2019-03-08 15:16 ` [Qemu-devel] [PULL 00/57] qgraph merge Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1551979804-6060-39-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=lviver@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).