From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Wei Yang <richardw.yang@linux.intel.com>
Subject: [Qemu-devel] [PULL v2 28/31] exec.c: refactor function flatview_add_to_dispatch()
Date: Mon, 11 Mar 2019 17:55:32 +0100 [thread overview]
Message-ID: <1552323335-46779-29-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1552323335-46779-1-git-send-email-pbonzini@redhat.com>
From: Wei Yang <richardw.yang@linux.intel.com>
flatview_add_to_dispatch() registers page based on the condition of
*section*, which may looks like this:
|s|PPPPPPP|s|
where s stands for subpage and P for page.
The procedure of this function could be described as:
- register first subpage
- register page
- register last subpage
This means the procedure could be simplified into these three steps
instead of a loop iteration.
This patch refactors the function into three corresponding steps and
adds some comment to clarify it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190311054252.6094-1-richardw.yang@linux.intel.com>
[Paolo: move exit before adjustment of remain.offset_within_*,
otherwise int128_get64 fails when a region is 2^64 bytes long]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
exec.c | 48 +++++++++++++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 17 deletions(-)
diff --git a/exec.c b/exec.c
index 1d4f378..86a38d3 100644
--- a/exec.c
+++ b/exec.c
@@ -1599,35 +1599,49 @@ static void register_multipage(FlatView *fv,
phys_page_set(d, start_addr >> TARGET_PAGE_BITS, num_pages, section_index);
}
+/*
+ * The range in *section* may look like this:
+ *
+ * |s|PPPPPPP|s|
+ *
+ * where s stands for subpage and P for page.
+ */
void flatview_add_to_dispatch(FlatView *fv, MemoryRegionSection *section)
{
- MemoryRegionSection now = *section, remain = *section;
+ MemoryRegionSection remain = *section;
Int128 page_size = int128_make64(TARGET_PAGE_SIZE);
- if (now.offset_within_address_space & ~TARGET_PAGE_MASK) {
- uint64_t left = TARGET_PAGE_ALIGN(now.offset_within_address_space)
- - now.offset_within_address_space;
+ /* register first subpage */
+ if (remain.offset_within_address_space & ~TARGET_PAGE_MASK) {
+ uint64_t left = TARGET_PAGE_ALIGN(remain.offset_within_address_space)
+ - remain.offset_within_address_space;
+ MemoryRegionSection now = remain;
now.size = int128_min(int128_make64(left), now.size);
register_subpage(fv, &now);
- } else {
- now.size = int128_zero();
- }
- while (int128_ne(remain.size, now.size)) {
+ if (int128_eq(remain.size, now.size)) {
+ return;
+ }
remain.size = int128_sub(remain.size, now.size);
remain.offset_within_address_space += int128_get64(now.size);
remain.offset_within_region += int128_get64(now.size);
- now = remain;
- if (int128_lt(remain.size, page_size)) {
- register_subpage(fv, &now);
- } else if (remain.offset_within_address_space & ~TARGET_PAGE_MASK) {
- now.size = page_size;
- register_subpage(fv, &now);
- } else {
- now.size = int128_and(now.size, int128_neg(page_size));
- register_multipage(fv, &now);
+ }
+
+ /* register whole pages */
+ if (int128_ge(remain.size, page_size)) {
+ MemoryRegionSection now = remain;
+ now.size = int128_and(now.size, int128_neg(page_size));
+ register_multipage(fv, &now);
+ if (int128_eq(remain.size, now.size)) {
+ return;
}
+ remain.size = int128_sub(remain.size, now.size);
+ remain.offset_within_address_space += int128_get64(now.size);
+ remain.offset_within_region += int128_get64(now.size);
}
+
+ /* register last subpage */
+ register_subpage(fv, &remain);
}
void qemu_flush_coalesced_mmio_buffer(void)
--
1.8.3.1
next prev parent reply other threads:[~2019-03-11 16:56 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 16:55 [Qemu-devel] [PULL v2 00/31] Misc patches for 2019-03-09 Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 01/31] memory: Do not update coalesced IO range in the case of NOP Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 02/31] vfio-pci: enable by default Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 03/31] riscv/Kconfig: enable PCI_DEVICES Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 04/31] tests: test-qgraph: fix a memory leak Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 05/31] hw/i386/pc: run the multiboot loader before the PVH loader Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 06/31] block/iscsi: Restrict Linux-specific code Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 07/31] contrib/elf2dmp: add kernel start address checking Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 08/31] configure: Enable werror for git worktrees Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 09/31] target-i386: add kvm stubs to user-mode emulators Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 10/31] i386: extended the cpuid_level when Intel PT is enabled Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 11/31] virtio-scsi: Fix build with gcc 9 Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 12/31] lsi: implement basic SBCL functionality Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 13/31] lsi: check if SIGP bit is already set in Wait reselect Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 14/31] update copyright notice Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 15/31] build: get rid of target-obj-y Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 16/31] build: remove unnecessary assignments from Makefile.target Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 17/31] build: clean trace/generated-helpers.c Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 18/31] accel: Allow to build QEMU without TCG or KVM support Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 19/31] oslib-posix: Ignore fcntl("/dev/null", F_SETFL, O_NONBLOCK) failure Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 20/31] configure: Disable W^X on OpenBSD Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 21/31] scsi-disk: Fix crash if request is invaild or disk is no medium Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 22/31] lsi: use ldn_le_p()/stn_le_p() Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 23/31] lsi: use enum type for s->waiting Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 24/31] lsi: use enum type for s->msg_action Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 25/31] lsi: use SCSI phase names instead of numbers in trace Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 26/31] lsi: return dfifo value Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 27/31] lsi: 810/895A are always little endian Paolo Bonzini
2019-03-11 16:55 ` Paolo Bonzini [this message]
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 29/31] qom: cpu: destroy work_mutex in cpu_common_finalize Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 30/31] chardev: add support for authorization for TLS clients Paolo Bonzini
2019-03-11 16:55 ` [Qemu-devel] [PULL v2 31/31] qemugdb: fix licensing Paolo Bonzini
2019-03-11 19:05 ` [Qemu-devel] [PULL v2 00/31] Misc patches for 2019-03-09 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1552323335-46779-29-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richardw.yang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).