From: "Jason J. Herne" <jjherne@linux.ibm.com>
To: qemu-devel@nongnu.org, qemu-s390x@nongnu.org, cohuck@redhat.com,
thuth@redhat.com, pasic@linux.ibm.com, alifm@linux.ibm.com,
borntraeger@de.ibm.com
Subject: [Qemu-devel] [PATCH v6 04/16] s390-bios: Clean up cio.h
Date: Thu, 4 Apr 2019 10:34:23 -0400 [thread overview]
Message-ID: <1554388475-18329-5-git-send-email-jjherne@linux.ibm.com> (raw)
In-Reply-To: <1554388475-18329-1-git-send-email-jjherne@linux.ibm.com>
Add proper typedefs to all structs and modify all bit fields to use consistent
formatting.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
pc-bios/s390-ccw/cio.h | 114 ++++++++++++++++++++++----------------------
pc-bios/s390-ccw/s390-ccw.h | 8 ----
2 files changed, 57 insertions(+), 65 deletions(-)
diff --git a/pc-bios/s390-ccw/cio.h b/pc-bios/s390-ccw/cio.h
index 1a0795f..ed5b2cb 100644
--- a/pc-bios/s390-ccw/cio.h
+++ b/pc-bios/s390-ccw/cio.h
@@ -17,35 +17,35 @@
* path management control word
*/
struct pmcw {
- __u32 intparm; /* interruption parameter */
- __u32 qf : 1; /* qdio facility */
- __u32 w : 1;
- __u32 isc : 3; /* interruption sublass */
- __u32 res5 : 3; /* reserved zeros */
- __u32 ena : 1; /* enabled */
- __u32 lm : 2; /* limit mode */
- __u32 mme : 2; /* measurement-mode enable */
- __u32 mp : 1; /* multipath mode */
- __u32 tf : 1; /* timing facility */
- __u32 dnv : 1; /* device number valid */
- __u32 dev : 16; /* device number */
- __u8 lpm; /* logical path mask */
- __u8 pnom; /* path not operational mask */
- __u8 lpum; /* last path used mask */
- __u8 pim; /* path installed mask */
- __u16 mbi; /* measurement-block index */
- __u8 pom; /* path operational mask */
- __u8 pam; /* path available mask */
- __u8 chpid[8]; /* CHPID 0-7 (if available) */
- __u32 unused1 : 8; /* reserved zeros */
- __u32 st : 3; /* subchannel type */
- __u32 unused2 : 18; /* reserved zeros */
- __u32 mbfc : 1; /* measurement block format control */
- __u32 xmwme : 1; /* extended measurement word mode enable */
- __u32 csense : 1; /* concurrent sense; can be enabled ...*/
- /* ... per MSCH, however, if facility */
- /* ... is not installed, this results */
- /* ... in an operand exception. */
+ __u32 intparm; /* interruption parameter */
+ __u32 qf:1; /* qdio facility */
+ __u32 w:1;
+ __u32 isc:3; /* interruption sublass */
+ __u32 res5:3; /* reserved zeros */
+ __u32 ena:1; /* enabled */
+ __u32 lm:2; /* limit mode */
+ __u32 mme:2; /* measurement-mode enable */
+ __u32 mp:1; /* multipath mode */
+ __u32 tf:1; /* timing facility */
+ __u32 dnv:1; /* device number valid */
+ __u32 dev:16; /* device number */
+ __u8 lpm; /* logical path mask */
+ __u8 pnom; /* path not operational mask */
+ __u8 lpum; /* last path used mask */
+ __u8 pim; /* path installed mask */
+ __u16 mbi; /* measurement-block index */
+ __u8 pom; /* path operational mask */
+ __u8 pam; /* path available mask */
+ __u8 chpid[8]; /* CHPID 0-7 (if available) */
+ __u32 unused1:8; /* reserved zeros */
+ __u32 st:3; /* subchannel type */
+ __u32 unused2:18; /* reserved zeros */
+ __u32 mbfc:1; /* measurement block format control */
+ __u32 xmwme:1; /* extended measurement word mode enable */
+ __u32 csense:1; /* concurrent sense; can be enabled ...*/
+ /* ... per MSCH, however, if facility */
+ /* ... is not installed, this results */
+ /* ... in an operand exception. */
} __attribute__ ((packed));
/* Target SCHIB configuration. */
@@ -77,28 +77,28 @@ struct scsw {
/*
* subchannel information block
*/
-struct schib {
+typedef struct schib {
struct pmcw pmcw; /* path management control word */
struct scsw scsw; /* subchannel status word */
__u64 mba; /* measurement block address */
__u8 mda[4]; /* model dependent area */
-} __attribute__ ((packed,aligned(4)));
-
-struct subchannel_id {
- __u32 cssid : 8;
- __u32 : 4;
- __u32 m : 1;
- __u32 ssid : 2;
- __u32 one : 1;
- __u32 sch_no : 16;
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) Schib;
+
+typedef struct subchannel_id {
+ __u32 cssid:8;
+ __u32:4;
+ __u32 m:1;
+ __u32 ssid:2;
+ __u32 one:1;
+ __u32 sch_no:16;
+} __attribute__ ((packed, aligned(4))) SubChannelId;
struct chsc_header {
__u16 length;
__u16 code;
} __attribute__((packed));
-struct chsc_area_sda {
+typedef struct chsc_area_sda {
struct chsc_header request;
__u8 reserved1:4;
__u8 format:4;
@@ -111,29 +111,29 @@ struct chsc_area_sda {
__u32 reserved5:4;
__u32 format2:4;
__u32 reserved6:24;
-} __attribute__((packed));
+} __attribute__((packed)) ChscAreaSda;
/*
* TPI info structure
*/
struct tpi_info {
struct subchannel_id schid;
- __u32 intparm; /* interruption parameter */
- __u32 adapter_IO : 1;
- __u32 reserved2 : 1;
- __u32 isc : 3;
- __u32 reserved3 : 12;
- __u32 int_type : 3;
- __u32 reserved4 : 12;
+ __u32 intparm; /* interruption parameter */
+ __u32 adapter_IO:1;
+ __u32 reserved2:1;
+ __u32 isc:3;
+ __u32 reserved3:12;
+ __u32 int_type:3;
+ __u32 reserved4:12;
} __attribute__ ((packed, aligned(4)));
/* channel command word (type 1) */
-struct ccw1 {
+typedef struct ccw1 {
__u8 cmd_code;
__u8 flags;
__u16 count;
__u32 cda;
-} __attribute__ ((packed, aligned(8)));
+} __attribute__ ((packed, aligned(8))) Ccw1;
#define CCW_FLAG_DC 0x80
#define CCW_FLAG_CC 0x40
@@ -162,7 +162,7 @@ struct ccw1 {
/*
* Command-mode operation request block
*/
-struct cmd_orb {
+typedef struct cmd_orb {
__u32 intparm; /* interruption parameter */
__u32 key:4; /* flags, like key, suspend control, etc. */
__u32 spnd:1; /* suspend control */
@@ -182,7 +182,7 @@ struct cmd_orb {
__u32 zero:6; /* reserved zeros */
__u32 orbx:1; /* ORB extension control */
__u32 cpa; /* channel program address */
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) CmdOrb;
struct ciw {
__u8 type;
@@ -193,7 +193,7 @@ struct ciw {
/*
* sense-id response buffer layout
*/
-struct senseid {
+typedef struct senseid {
/* common part */
__u8 reserved; /* always 0x'FF' */
__u16 cu_type; /* control unit type */
@@ -203,15 +203,15 @@ struct senseid {
__u8 unused; /* padding byte */
/* extended part */
struct ciw ciw[62];
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) SenseId;
/* interruption response block */
-struct irb {
+typedef struct irb {
struct scsw scsw;
__u32 esw[5];
__u32 ecw[8];
__u32 emw[8];
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) Irb;
/*
* Some S390 specific IO instructions as inline
diff --git a/pc-bios/s390-ccw/s390-ccw.h b/pc-bios/s390-ccw/s390-ccw.h
index 9828aa2..241c6d0 100644
--- a/pc-bios/s390-ccw/s390-ccw.h
+++ b/pc-bios/s390-ccw/s390-ccw.h
@@ -49,14 +49,6 @@ typedef unsigned long long __u64;
#include "cio.h"
#include "iplb.h"
-typedef struct irb Irb;
-typedef struct ccw1 Ccw1;
-typedef struct cmd_orb CmdOrb;
-typedef struct schib Schib;
-typedef struct chsc_area_sda ChscAreaSda;
-typedef struct senseid SenseId;
-typedef struct subchannel_id SubChannelId;
-
/* start.s */
void disabled_wait(void);
void consume_sclp_int(void);
--
2.7.4
next prev parent reply other threads:[~2019-04-04 14:34 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-04 14:34 [Qemu-devel] [PATCH v6 00/16] s390: vfio-ccw dasd ipl support Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 01/16] s390 vfio-ccw: Add bootindex property and IPLB data Jason J. Herne
2019-04-12 10:38 ` Thomas Huth
2019-04-12 10:38 ` Thomas Huth
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 02/16] s390-bios: decouple cio setup from virtio Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 03/16] s390-bios: decouple common boot logic " Jason J. Herne
2019-04-04 14:34 ` Jason J. Herne [this message]
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 05/16] s390-bios: Decouple channel i/o " Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 06/16] s390-bios: Map low core memory Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 07/16] s390-bios: ptr2u32 and u32toptr Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 08/16] s390-bios: Support for running format-0/1 channel programs Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 09/16] s390-bios: cio error handling Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 10/16] s390-bios: Extend find_dev() for non-virtio devices Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 11/16] s390-bios: Factor finding boot device out of virtio code path Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 12/16] s390-bios: Refactor virtio to run channel programs via cio Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 13/16] s390-bios: Use control unit type to determine boot method Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 14/16] s390-bios: Add channel command codes/structs needed for dasd-ipl Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 15/16] s390-bios: Support booting from real dasd device Jason J. Herne
2019-04-04 14:34 ` [Qemu-devel] [PATCH v6 16/16] s390-bios: Use control unit type to find bootable devices Jason J. Herne
2019-04-05 5:55 ` Thomas Huth
2019-04-05 5:55 ` Thomas Huth
2019-04-04 15:14 ` [Qemu-devel] [PATCH v6 00/16] s390: vfio-ccw dasd ipl support no-reply
2019-04-04 15:20 ` no-reply
2019-04-05 6:58 ` Thomas Huth
2019-04-05 6:58 ` Thomas Huth
2019-04-05 7:52 ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2019-04-05 7:52 ` Thomas Huth
2019-04-05 13:11 ` Jason J. Herne
2019-04-05 13:11 ` Jason J. Herne
2019-04-05 13:26 ` Thomas Huth
2019-04-05 13:26 ` Thomas Huth
2019-04-05 13:36 ` Cornelia Huck
2019-04-05 13:36 ` Cornelia Huck
2019-04-05 13:43 ` Jason J. Herne
2019-04-05 13:43 ` Jason J. Herne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1554388475-18329-5-git-send-email-jjherne@linux.ibm.com \
--to=jjherne@linux.ibm.com \
--cc=alifm@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=pasic@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).