From: Igor Mammedov <imammedo@redhat.com> To: qemu-devel@nongnu.org Cc: "Paolo Bonzini" <pbonzini@redhat.com>, "Richard Henderson" <rth@twiddle.net>, "Helge Deller" <deller@gmx.de>, "Hervé Poussineau" <hpoussin@reactos.org>, "David Gibson" <david@gibson.dropbear.id.au>, "Cornelia Huck" <cohuck@redhat.com>, "Halil Pasic" <pasic@linux.ibm.com>, "Christian Borntraeger" <borntraeger@de.ibm.com>, "David Hildenbrand" <david@redhat.com>, "Artyom Tarasenko" <atar4qemu@gmail.com>, "Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>, qemu-ppc@nongnu.org, qemu-s390x@nongnu.org Subject: [Qemu-devel] [PATCH v1 1/5] sparc64: use memory_region_allocate_system_memory() only for '-m' specified RAM Date: Mon, 15 Apr 2019 15:27:18 +0200 [thread overview] Message-ID: <1555334842-195718-2-git-send-email-imammedo@redhat.com> (raw) In-Reply-To: <1555334842-195718-1-git-send-email-imammedo@redhat.com> memory_region_allocate_system_memory() was designed to be called for allocating inital RAM. Using it mutiple times within one board is not supported and could fail if -mem-path with non hugepage path is used. Keep using memory_region_allocate_system_memory() only for initial RAM and use memory_region_init_ram() for the rest fixed size regions. Signed-off-by: Igor Mammedov <imammedo@redhat.com> --- hw/sparc64/niagara.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/hw/sparc64/niagara.c b/hw/sparc64/niagara.c index f8a856f..39a4522 100644 --- a/hw/sparc64/niagara.c +++ b/hw/sparc64/niagara.c @@ -37,6 +37,7 @@ #include "sysemu/block-backend.h" #include "qemu/error-report.h" #include "sysemu/qtest.h" +#include "qapi/error.h" typedef struct NiagaraBoardState { @@ -108,8 +109,8 @@ static void niagara_init(MachineState *machine) /* init CPUs */ sparc64_cpu_devinit(machine->cpu_type, NIAGARA_PROM_BASE); /* set up devices */ - memory_region_allocate_system_memory(&s->hv_ram, NULL, "sun4v-hv.ram", - NIAGARA_HV_RAM_SIZE); + memory_region_init_ram(&s->hv_ram, NULL, "sun4v-hv.ram", + NIAGARA_HV_RAM_SIZE, &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_HV_RAM_BASE, &s->hv_ram); memory_region_allocate_system_memory(&s->partition_ram, NULL, @@ -118,17 +119,17 @@ static void niagara_init(MachineState *machine) memory_region_add_subregion(sysmem, NIAGARA_PARTITION_RAM_BASE, &s->partition_ram); - memory_region_allocate_system_memory(&s->nvram, NULL, - "sun4v.nvram", NIAGARA_NVRAM_SIZE); + memory_region_init_ram(&s->nvram, NULL, "sun4v.nvram", NIAGARA_NVRAM_SIZE, + &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_NVRAM_BASE, &s->nvram); - memory_region_allocate_system_memory(&s->md_rom, NULL, - "sun4v-md.rom", NIAGARA_MD_ROM_SIZE); + memory_region_init_ram(&s->md_rom, NULL, "sun4v-md.rom", + NIAGARA_MD_ROM_SIZE, &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_MD_ROM_BASE, &s->md_rom); - memory_region_allocate_system_memory(&s->hv_rom, NULL, - "sun4v-hv.rom", NIAGARA_HV_ROM_SIZE); + memory_region_init_ram(&s->hv_rom, NULL, "sun4v-hv.rom", + NIAGARA_HV_ROM_SIZE, &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_HV_ROM_BASE, &s->hv_rom); - memory_region_allocate_system_memory(&s->prom, NULL, - "sun4v.prom", PROM_SIZE_MAX); + memory_region_init_ram(&s->prom, NULL, "sun4v.prom", PROM_SIZE_MAX, + &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_PROM_BASE, &s->prom); add_rom_or_fail("nvram1", NIAGARA_NVRAM_BASE); @@ -145,8 +146,8 @@ static void niagara_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); int size = blk_getlength(blk); if (size > 0) { - memory_region_allocate_system_memory(&s->vdisk_ram, NULL, - "sun4v_vdisk.ram", size); + memory_region_init_ram(&s->vdisk_ram, NULL, "sun4v_vdisk.ram", size, + &error_fatal); memory_region_add_subregion(get_system_memory(), NIAGARA_VDISK_BASE, &s->vdisk_ram); dinfo->is_default = 1; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Igor Mammedov <imammedo@redhat.com> To: qemu-devel@nongnu.org Cc: qemu-ppc@nongnu.org, "David Hildenbrand" <david@redhat.com>, "Helge Deller" <deller@gmx.de>, "Cornelia Huck" <cohuck@redhat.com>, "Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>, "Halil Pasic" <pasic@linux.ibm.com>, "Christian Borntraeger" <borntraeger@de.ibm.com>, qemu-s390x@nongnu.org, "Hervé Poussineau" <hpoussin@reactos.org>, "Paolo Bonzini" <pbonzini@redhat.com>, "Richard Henderson" <rth@twiddle.net>, "Artyom Tarasenko" <atar4qemu@gmail.com>, "David Gibson" <david@gibson.dropbear.id.au> Subject: [Qemu-devel] [PATCH v1 1/5] sparc64: use memory_region_allocate_system_memory() only for '-m' specified RAM Date: Mon, 15 Apr 2019 15:27:18 +0200 [thread overview] Message-ID: <1555334842-195718-2-git-send-email-imammedo@redhat.com> (raw) Message-ID: <20190415132718.oE9dYgs9naYV1yp1HAt6bQ9zcx0tcVWh0OPd-svBPeU@z> (raw) In-Reply-To: <1555334842-195718-1-git-send-email-imammedo@redhat.com> memory_region_allocate_system_memory() was designed to be called for allocating inital RAM. Using it mutiple times within one board is not supported and could fail if -mem-path with non hugepage path is used. Keep using memory_region_allocate_system_memory() only for initial RAM and use memory_region_init_ram() for the rest fixed size regions. Signed-off-by: Igor Mammedov <imammedo@redhat.com> --- hw/sparc64/niagara.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/hw/sparc64/niagara.c b/hw/sparc64/niagara.c index f8a856f..39a4522 100644 --- a/hw/sparc64/niagara.c +++ b/hw/sparc64/niagara.c @@ -37,6 +37,7 @@ #include "sysemu/block-backend.h" #include "qemu/error-report.h" #include "sysemu/qtest.h" +#include "qapi/error.h" typedef struct NiagaraBoardState { @@ -108,8 +109,8 @@ static void niagara_init(MachineState *machine) /* init CPUs */ sparc64_cpu_devinit(machine->cpu_type, NIAGARA_PROM_BASE); /* set up devices */ - memory_region_allocate_system_memory(&s->hv_ram, NULL, "sun4v-hv.ram", - NIAGARA_HV_RAM_SIZE); + memory_region_init_ram(&s->hv_ram, NULL, "sun4v-hv.ram", + NIAGARA_HV_RAM_SIZE, &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_HV_RAM_BASE, &s->hv_ram); memory_region_allocate_system_memory(&s->partition_ram, NULL, @@ -118,17 +119,17 @@ static void niagara_init(MachineState *machine) memory_region_add_subregion(sysmem, NIAGARA_PARTITION_RAM_BASE, &s->partition_ram); - memory_region_allocate_system_memory(&s->nvram, NULL, - "sun4v.nvram", NIAGARA_NVRAM_SIZE); + memory_region_init_ram(&s->nvram, NULL, "sun4v.nvram", NIAGARA_NVRAM_SIZE, + &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_NVRAM_BASE, &s->nvram); - memory_region_allocate_system_memory(&s->md_rom, NULL, - "sun4v-md.rom", NIAGARA_MD_ROM_SIZE); + memory_region_init_ram(&s->md_rom, NULL, "sun4v-md.rom", + NIAGARA_MD_ROM_SIZE, &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_MD_ROM_BASE, &s->md_rom); - memory_region_allocate_system_memory(&s->hv_rom, NULL, - "sun4v-hv.rom", NIAGARA_HV_ROM_SIZE); + memory_region_init_ram(&s->hv_rom, NULL, "sun4v-hv.rom", + NIAGARA_HV_ROM_SIZE, &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_HV_ROM_BASE, &s->hv_rom); - memory_region_allocate_system_memory(&s->prom, NULL, - "sun4v.prom", PROM_SIZE_MAX); + memory_region_init_ram(&s->prom, NULL, "sun4v.prom", PROM_SIZE_MAX, + &error_fatal); memory_region_add_subregion(sysmem, NIAGARA_PROM_BASE, &s->prom); add_rom_or_fail("nvram1", NIAGARA_NVRAM_BASE); @@ -145,8 +146,8 @@ static void niagara_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); int size = blk_getlength(blk); if (size > 0) { - memory_region_allocate_system_memory(&s->vdisk_ram, NULL, - "sun4v_vdisk.ram", size); + memory_region_init_ram(&s->vdisk_ram, NULL, "sun4v_vdisk.ram", size, + &error_fatal); memory_region_add_subregion(get_system_memory(), NIAGARA_VDISK_BASE, &s->vdisk_ram); dinfo->is_default = 1; -- 2.7.4
next prev parent reply other threads:[~2019-04-15 13:27 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-15 13:27 [Qemu-devel] [PATCH v1 0/5] Fix misuses of memory_region_allocate_system_memory() Igor Mammedov 2019-04-15 13:27 ` Igor Mammedov 2019-04-15 13:27 ` Igor Mammedov [this message] 2019-04-15 13:27 ` [Qemu-devel] [PATCH v1 1/5] sparc64: use memory_region_allocate_system_memory() only for '-m' specified RAM Igor Mammedov 2019-04-15 15:07 ` Philippe Mathieu-Daudé 2019-04-15 15:07 ` Philippe Mathieu-Daudé 2019-04-15 13:27 ` [Qemu-devel] [PATCH v1 2/5] ppc: rs6000_mc: drop usage of memory_region_allocate_system_memory() Igor Mammedov 2019-04-15 13:27 ` Igor Mammedov 2019-04-16 4:13 ` David Gibson 2019-04-16 4:13 ` David Gibson 2019-04-15 13:27 ` [Qemu-devel] [PATCH v1 3/5] hppa: drop usage of memory_region_allocate_system_memory() for ROM Igor Mammedov 2019-04-15 13:27 ` Igor Mammedov 2019-04-15 15:16 ` Philippe Mathieu-Daudé 2019-04-15 15:16 ` Philippe Mathieu-Daudé 2019-04-15 13:27 ` [Qemu-devel] [PATCH v1 4/5] memory: make MemoryRegion alias migratable Igor Mammedov 2019-04-15 13:27 ` Igor Mammedov 2019-04-15 13:27 ` [Qemu-devel] [PATCH v1 5/5] s390: do not call memory_region_allocate_system_memory() multiple times Igor Mammedov 2019-04-15 13:27 ` Igor Mammedov 2019-04-16 11:01 ` Christian Borntraeger 2019-04-16 11:01 ` Christian Borntraeger 2019-04-16 11:02 ` Christian Borntraeger 2019-04-16 11:02 ` Christian Borntraeger 2019-04-16 11:09 ` Christian Borntraeger 2019-04-16 11:09 ` Christian Borntraeger 2019-04-17 14:30 ` Igor Mammedov 2019-04-17 14:30 ` Igor Mammedov 2019-04-18 9:38 ` Igor Mammedov 2019-04-18 9:38 ` Igor Mammedov 2019-04-18 11:24 ` David Hildenbrand 2019-04-18 11:24 ` David Hildenbrand 2019-04-18 12:01 ` Igor Mammedov 2019-04-18 12:01 ` Igor Mammedov 2019-04-18 12:06 ` David Hildenbrand 2019-04-18 12:06 ` David Hildenbrand 2019-04-18 14:56 ` Igor Mammedov 2019-04-18 14:56 ` Igor Mammedov 2019-04-18 15:01 ` David Hildenbrand 2019-04-18 15:01 ` David Hildenbrand
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1555334842-195718-2-git-send-email-imammedo@redhat.com \ --to=imammedo@redhat.com \ --cc=atar4qemu@gmail.com \ --cc=borntraeger@de.ibm.com \ --cc=cohuck@redhat.com \ --cc=david@gibson.dropbear.id.au \ --cc=david@redhat.com \ --cc=deller@gmx.de \ --cc=hpoussin@reactos.org \ --cc=mark.cave-ayland@ilande.co.uk \ --cc=pasic@linux.ibm.com \ --cc=pbonzini@redhat.com \ --cc=qemu-devel@nongnu.org \ --cc=qemu-ppc@nongnu.org \ --cc=qemu-s390x@nongnu.org \ --cc=rth@twiddle.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).