qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Jason J. Herne" <jjherne@linux.ibm.com>
To: qemu-devel@nongnu.org, qemu-s390x@nongnu.org, cohuck@redhat.com,
	thuth@redhat.com, alifm@linux.ibm.com, borntraeger@de.ibm.com
Subject: [Qemu-devel] [PATCH] s390-bios: Skip bootmap signature entries
Date: Mon, 29 Apr 2019 09:09:41 -0400	[thread overview]
Message-ID: <1556543381-12671-1-git-send-email-jjherne@linux.ibm.com> (raw)

Newer versions of zipl have the ability to write signature entries to the boot
script for secure boot. We don't yet support secure boot, but we need to skip
over signature entries while reading the boot script in order to maintain our
ability to boot guest operating systems that have a secure bootloader.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
---
 pc-bios/s390-ccw/bootmap.c | 19 +++++++++++++++++--
 pc-bios/s390-ccw/bootmap.h | 10 ++++++----
 2 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
index 7aef65a..d13b7cb 100644
--- a/pc-bios/s390-ccw/bootmap.c
+++ b/pc-bios/s390-ccw/bootmap.c
@@ -254,7 +254,14 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr,
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(block_nr, sec, "Cannot read Boot Map Script");
 
-    for (i = 0; bms->entry[i].type == BOOT_SCRIPT_LOAD; i++) {
+    for (i = 0; bms->entry[i].type == BOOT_SCRIPT_LOAD ||
+                bms->entry[i].type == BOOT_SCRIPT_SIGNATURE; i++) {
+
+        /* We don't support secure boot yet, so we skip signature entries */
+        if (bms->entry[i].type == BOOT_SCRIPT_SIGNATURE) {
+            continue;
+        }
+
         address = bms->entry[i].address.load_address;
         block_nr = eckd_block_num(&bms->entry[i].blkptr.xeckd.bptr.chs);
 
@@ -489,7 +496,15 @@ static void zipl_run(ScsiBlockPtr *pte)
 
     /* Load image(s) into RAM */
     entry = (ComponentEntry *)(&header[1]);
-    while (entry->component_type == ZIPL_COMP_ENTRY_LOAD) {
+    while (entry->component_type == ZIPL_COMP_ENTRY_LOAD ||
+           entry->component_type == ZIPL_COMP_ENTRY_SIGNATURE) {
+
+        /* We don't support secure boot yet, so we skip signature entries */
+        if (entry->component_type == ZIPL_COMP_ENTRY_SIGNATURE) {
+            entry++;
+            continue;
+        }
+
         zipl_load_segment(entry);
 
         entry++;
diff --git a/pc-bios/s390-ccw/bootmap.h b/pc-bios/s390-ccw/bootmap.h
index a085212..94f53a5 100644
--- a/pc-bios/s390-ccw/bootmap.h
+++ b/pc-bios/s390-ccw/bootmap.h
@@ -98,8 +98,9 @@ typedef struct ScsiMbr {
 #define ZIPL_COMP_HEADER_IPL    0x00
 #define ZIPL_COMP_HEADER_DUMP   0x01
 
-#define ZIPL_COMP_ENTRY_LOAD    0x02
-#define ZIPL_COMP_ENTRY_EXEC    0x01
+#define ZIPL_COMP_ENTRY_EXEC      0x01
+#define ZIPL_COMP_ENTRY_LOAD      0x02
+#define ZIPL_COMP_ENTRY_SIGNATURE 0x03
 
 typedef struct XEckdMbr {
     uint8_t magic[4];   /* == "xIPL"        */
@@ -117,8 +118,9 @@ typedef struct BootMapScriptEntry {
     BootMapPointer blkptr;
     uint8_t pad[7];
     uint8_t type;   /* == BOOT_SCRIPT_* */
-#define BOOT_SCRIPT_EXEC 0x01
-#define BOOT_SCRIPT_LOAD 0x02
+#define BOOT_SCRIPT_EXEC      0x01
+#define BOOT_SCRIPT_LOAD      0x02
+#define BOOT_SCRIPT_SIGNATURE 0x03
     union {
         uint64_t load_address;
         uint64_t load_psw;
-- 
2.7.4

             reply	other threads:[~2019-04-29 13:09 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-29 13:09 Jason J. Herne [this message]
2019-04-29 13:09 ` [Qemu-devel] [PATCH] s390-bios: Skip bootmap signature entries Jason J. Herne
2019-04-29 13:40 ` Cornelia Huck
2019-04-29 13:40   ` Cornelia Huck
2019-04-29 13:45   ` Christian Borntraeger
2019-04-29 13:45     ` Christian Borntraeger
2019-04-30  9:24     ` Peter Oberparleiter
2019-04-30  9:24       ` Peter Oberparleiter
2019-04-30  9:44       ` Cornelia Huck
2019-04-30  9:44         ` Cornelia Huck
2019-05-03  9:34 ` Thomas Huth
2019-05-03  9:34   ` Thomas Huth
2019-05-06  8:08   ` Christian Borntraeger
2019-05-06 13:03     ` Jason J. Herne
2019-05-06 10:01 ` [Qemu-devel] [qemu-s390x] " David Hildenbrand
2019-05-06 10:10   ` David Hildenbrand
2019-05-06 10:16     ` Thomas Huth
2019-05-06 10:18       ` Christian Borntraeger
2019-05-06 10:34         ` Cornelia Huck
2019-05-06 10:46           ` Christian Borntraeger
2019-05-06 11:05             ` Cornelia Huck
2019-05-06 11:13               ` Christian Borntraeger
2019-05-06 11:23                 ` Cornelia Huck
2019-05-06 11:24                   ` Christian Borntraeger
2019-05-06 10:14   ` Christian Borntraeger
2019-05-06 10:30     ` Cornelia Huck
2019-05-06 10:45       ` Christian Borntraeger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556543381-12671-1-git-send-email-jjherne@linux.ibm.com \
    --to=jjherne@linux.ibm.com \
    --cc=alifm@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).