From: Suraj Jitindar Singh <sjitindarsingh@gmail.com> To: qemu-devel@nongnu.org Cc: qemu-ppc@nongnu.org, david@gibson.dropbear.id.au, clg@kaod.org, groug@kaod.org Subject: Re: [Qemu-devel] [QEMU-PPC] [PATCH 00/13] target/ppc: Implement KVM support under TCG Date: Fri, 03 May 2019 15:58:17 +1000 [thread overview] Message-ID: <1556863097.1887.4.camel@gmail.com> (raw) In-Reply-To: <20190503055316.6441-1-sjitindarsingh@gmail.com> On Fri, 2019-05-03 at 15:53 +1000, Suraj Jitindar Singh wrote: > This patch series adds the necessary parts so that a tcg guest is > able to use > kvm facilities. That is a tcg guest can boot its own kvm guests. > > The main requirements for this were a few registers and instructions > as well as > some hcalls and the addition of partition scoped translation in the > radix mmu > emulation. > > This can be used to boot a kvm guest under a pseries tcg guest: > Use power9_v2.2 cpu and add -machine cap-nested-hv=on for the first > guest. > Then inside that guest boot a kvm guest as normal. > This takes advantage of the new hcalls with qemu emulating them as a > normal > hypervisor would on a real machine. > > This can also be used to boot a kvm guest under a powernv tcg guest: > Use any power9 cpu type. > This takes advantage of the new hv register access added. > Note that for powernv there is no xive interrupt excalation for KVM > which means > that while the guest will boot, it won't receive any interrupts. Ah so I'm suddenly aware I based this on the wrong tree so it won't apply to your dwg-ppc-for-4.1 David. Consider this a RFC and I'll rebase and resend when required. > > Suraj Jitindar Singh (13): > target/ppc: Implement the VTB for HV access > target/ppc: Work [S]PURR implementation and add HV support > target/ppc: Add SPR ASDR > target/ppc: Add SPR TBU40 > target/ppc: Add privileged message send facilities > target/ppc: Enforce that the root page directory size must be at > least > 5 > target/ppc: Handle partition scoped radix tree translation > target/ppc: Implement hcall H_SET_PARTITION_TABLE > target/ppc: Implement hcall H_ENTER_NESTED > target/ppc: Implement hcall H_TLB_INVALIDATE > target/ppc: Implement hcall H_COPY_TOFROM_GUEST > target/ppc: Introduce POWER9 DD2.2 cpu type > target/ppc: Enable SPAPR_CAP_NESTED_KVM_HV under tcg > > hw/ppc/ppc.c | 46 ++++- > hw/ppc/spapr_caps.c | 22 ++- > hw/ppc/spapr_cpu_core.c | 1 + > hw/ppc/spapr_hcall.c | 409 > +++++++++++++++++++++++++++++++++++++++ > include/hw/ppc/ppc.h | 4 +- > include/hw/ppc/spapr.h | 7 +- > linux-user/ppc/cpu_loop.c | 5 + > target/ppc/cpu-models.c | 2 + > target/ppc/cpu-models.h | 1 + > target/ppc/cpu.h | 70 +++++++ > target/ppc/excp_helper.c | 79 +++++++- > target/ppc/helper.h | 9 + > target/ppc/misc_helper.c | 46 +++++ > target/ppc/mmu-radix64.c | 412 ++++++++++++++++++++++++++++ > ------------ > target/ppc/mmu-radix64.h | 4 + > target/ppc/timebase_helper.c | 20 ++ > target/ppc/translate.c | 28 +++ > target/ppc/translate_init.inc.c | 107 +++++++++-- > 18 files changed, 1115 insertions(+), 157 deletions(-) >
WARNING: multiple messages have this Message-ID (diff)
From: Suraj Jitindar Singh <sjitindarsingh@gmail.com> To: qemu-devel@nongnu.org Cc: groug@kaod.org, qemu-ppc@nongnu.org, clg@kaod.org, david@gibson.dropbear.id.au Subject: Re: [Qemu-devel] [QEMU-PPC] [PATCH 00/13] target/ppc: Implement KVM support under TCG Date: Fri, 03 May 2019 15:58:17 +1000 [thread overview] Message-ID: <1556863097.1887.4.camel@gmail.com> (raw) Message-ID: <20190503055817.rImS7xFNBjRhL3UGUwEIUsvZgjjvH6l1X0Yz8mF4u1Q@z> (raw) In-Reply-To: <20190503055316.6441-1-sjitindarsingh@gmail.com> On Fri, 2019-05-03 at 15:53 +1000, Suraj Jitindar Singh wrote: > This patch series adds the necessary parts so that a tcg guest is > able to use > kvm facilities. That is a tcg guest can boot its own kvm guests. > > The main requirements for this were a few registers and instructions > as well as > some hcalls and the addition of partition scoped translation in the > radix mmu > emulation. > > This can be used to boot a kvm guest under a pseries tcg guest: > Use power9_v2.2 cpu and add -machine cap-nested-hv=on for the first > guest. > Then inside that guest boot a kvm guest as normal. > This takes advantage of the new hcalls with qemu emulating them as a > normal > hypervisor would on a real machine. > > This can also be used to boot a kvm guest under a powernv tcg guest: > Use any power9 cpu type. > This takes advantage of the new hv register access added. > Note that for powernv there is no xive interrupt excalation for KVM > which means > that while the guest will boot, it won't receive any interrupts. Ah so I'm suddenly aware I based this on the wrong tree so it won't apply to your dwg-ppc-for-4.1 David. Consider this a RFC and I'll rebase and resend when required. > > Suraj Jitindar Singh (13): > target/ppc: Implement the VTB for HV access > target/ppc: Work [S]PURR implementation and add HV support > target/ppc: Add SPR ASDR > target/ppc: Add SPR TBU40 > target/ppc: Add privileged message send facilities > target/ppc: Enforce that the root page directory size must be at > least > 5 > target/ppc: Handle partition scoped radix tree translation > target/ppc: Implement hcall H_SET_PARTITION_TABLE > target/ppc: Implement hcall H_ENTER_NESTED > target/ppc: Implement hcall H_TLB_INVALIDATE > target/ppc: Implement hcall H_COPY_TOFROM_GUEST > target/ppc: Introduce POWER9 DD2.2 cpu type > target/ppc: Enable SPAPR_CAP_NESTED_KVM_HV under tcg > > hw/ppc/ppc.c | 46 ++++- > hw/ppc/spapr_caps.c | 22 ++- > hw/ppc/spapr_cpu_core.c | 1 + > hw/ppc/spapr_hcall.c | 409 > +++++++++++++++++++++++++++++++++++++++ > include/hw/ppc/ppc.h | 4 +- > include/hw/ppc/spapr.h | 7 +- > linux-user/ppc/cpu_loop.c | 5 + > target/ppc/cpu-models.c | 2 + > target/ppc/cpu-models.h | 1 + > target/ppc/cpu.h | 70 +++++++ > target/ppc/excp_helper.c | 79 +++++++- > target/ppc/helper.h | 9 + > target/ppc/misc_helper.c | 46 +++++ > target/ppc/mmu-radix64.c | 412 ++++++++++++++++++++++++++++ > ------------ > target/ppc/mmu-radix64.h | 4 + > target/ppc/timebase_helper.c | 20 ++ > target/ppc/translate.c | 28 +++ > target/ppc/translate_init.inc.c | 107 +++++++++-- > 18 files changed, 1115 insertions(+), 157 deletions(-) >
next prev parent reply other threads:[~2019-05-03 5:58 UTC|newest] Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-03 5:53 [Qemu-devel] [QEMU-PPC] [PATCH 00/13] target/ppc: Implement KVM support under TCG Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 01/13] target/ppc: Implement the VTB for HV access Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-06 6:02 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 02/13] target/ppc: Work [S]PURR implementation and add HV support Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-06 6:15 ` David Gibson 2019-05-07 1:28 ` Suraj Jitindar Singh 2019-05-09 6:45 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 03/13] target/ppc: Add SPR ASDR Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-06 6:16 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 04/13] target/ppc: Add SPR TBU40 Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-06 6:17 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 05/13] target/ppc: Add privileged message send facilities Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 2:09 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 06/13] target/ppc: Enforce that the root page directory size must be at least 5 Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 2:11 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 07/13] target/ppc: Handle partition scoped radix tree translation Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 2:28 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 08/13] target/ppc: Implement hcall H_SET_PARTITION_TABLE Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 2:30 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 09/13] target/ppc: Implement hcall H_ENTER_NESTED Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 2:57 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 10/13] target/ppc: Implement hcall H_TLB_INVALIDATE Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 6:28 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 11/13] target/ppc: Implement hcall H_COPY_TOFROM_GUEST Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 6:32 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 12/13] target/ppc: Introduce POWER9 DD2.2 cpu type Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 6:32 ` David Gibson 2019-05-03 5:53 ` [Qemu-devel] [QEMU-PPC] [PATCH 13/13] target/ppc: Enable SPAPR_CAP_NESTED_KVM_HV under tcg Suraj Jitindar Singh 2019-05-03 5:53 ` Suraj Jitindar Singh 2019-05-10 6:34 ` David Gibson 2019-05-03 5:58 ` Suraj Jitindar Singh [this message] 2019-05-03 5:58 ` [Qemu-devel] [QEMU-PPC] [PATCH 00/13] target/ppc: Implement KVM support under TCG Suraj Jitindar Singh 2019-05-06 6:20 ` David Gibson 2019-05-06 23:45 ` Suraj Jitindar Singh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1556863097.1887.4.camel@gmail.com \ --to=sjitindarsingh@gmail.com \ --cc=clg@kaod.org \ --cc=david@gibson.dropbear.id.au \ --cc=groug@kaod.org \ --cc=qemu-devel@nongnu.org \ --cc=qemu-ppc@nongnu.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).