qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Laurent Vivier <lvivier@redhat.com>
Subject: [Qemu-devel] [PULL 15/21] build: replace GENERATED_FILES by generated-files-y
Date: Wed, 15 May 2019 22:50:27 +0200	[thread overview]
Message-ID: <1557953433-19663-16-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1557953433-19663-1-git-send-email-pbonzini@redhat.com>

From: Laurent Vivier <lvivier@redhat.com>

When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
---
 Makefile                   | 36 +++++++++++++++++-------------------
 Makefile.target            |  6 +++---
 target/s390x/Makefile.objs |  2 +-
 tests/Makefile.include     | 26 +++++++++++++-------------
 4 files changed, 34 insertions(+), 36 deletions(-)

diff --git a/Makefile b/Makefile
index 66d5c65..d9a3040 100644
--- a/Makefile
+++ b/Makefile
@@ -101,7 +101,7 @@ QEMU_PKGVERSION := $(if $(PKGVERSION),$(PKGVERSION),$(shell \
 # Either "version (pkgversion)", or just "version" if pkgversion not set
 FULL_VERSION := $(if $(QEMU_PKGVERSION),$(VERSION) ($(QEMU_PKGVERSION)),$(VERSION))
 
-GENERATED_FILES = qemu-version.h config-host.h qemu-options.def
+generated-files-y = qemu-version.h config-host.h qemu-options.def
 
 GENERATED_QAPI_FILES = qapi/qapi-builtin-types.h qapi/qapi-builtin-types.c
 GENERATED_QAPI_FILES += qapi/qapi-types.h qapi/qapi-types.c
@@ -121,20 +121,18 @@ GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-events-%.c)
 GENERATED_QAPI_FILES += qapi/qapi-introspect.c qapi/qapi-introspect.h
 GENERATED_QAPI_FILES += qapi/qapi-doc.texi
 
-GENERATED_FILES += $(GENERATED_QAPI_FILES)
+generated-files-y += $(GENERATED_QAPI_FILES)
 
-GENERATED_FILES += trace/generated-tcg-tracers.h
+generated-files-y += trace/generated-tcg-tracers.h
 
-GENERATED_FILES += trace/generated-helpers-wrappers.h
-GENERATED_FILES += trace/generated-helpers.h
-GENERATED_FILES += trace/generated-helpers.c
+generated-files-y += trace/generated-helpers-wrappers.h
+generated-files-y += trace/generated-helpers.h
+generated-files-y += trace/generated-helpers.c
 
-ifdef CONFIG_TRACE_UST
-GENERATED_FILES += trace-ust-all.h
-GENERATED_FILES += trace-ust-all.c
-endif
+generated-files-$(CONFIG_TRACE_UST) += trace-ust-all.h
+generated-files-$(CONFIG_TRACE_UST) += trace-ust-all.c
 
-GENERATED_FILES += module_block.h
+generated-files-y += module_block.h
 
 TRACE_HEADERS = trace-root.h $(trace-events-subdirs:%=%/trace.h)
 TRACE_SOURCES = trace-root.c $(trace-events-subdirs:%=%/trace.c)
@@ -147,10 +145,10 @@ ifdef CONFIG_TRACE_UST
 TRACE_HEADERS += trace-ust-root.h $(trace-events-subdirs:%=%/trace-ust.h)
 endif
 
-GENERATED_FILES += $(TRACE_HEADERS)
-GENERATED_FILES += $(TRACE_SOURCES)
-GENERATED_FILES += $(BUILD_DIR)/trace-events-all
-GENERATED_FILES += .git-submodule-status
+generated-files-y += $(TRACE_HEADERS)
+generated-files-y += $(TRACE_SOURCES)
+generated-files-y += $(BUILD_DIR)/trace-events-all
+generated-files-y += .git-submodule-status
 
 trace-group-name = $(shell dirname $1 | sed -e 's/[^a-zA-Z0-9]/_/g')
 
@@ -281,7 +279,7 @@ KEYCODEMAP_FILES = \
 		 ui/input-keymap-osx-to-qcode.c \
 		 $(NULL)
 
-GENERATED_FILES += $(KEYCODEMAP_FILES)
+generated-files-$(CONFIG_SOFTMMU) += $(KEYCODEMAP_FILES)
 
 ui/input-keymap-%.c: $(KEYCODEMAP_GEN) $(KEYCODEMAP_CSV) $(SRC_PATH)/ui/Makefile.objs
 	$(call quiet-command,\
@@ -643,10 +641,10 @@ clean:
 	rm -f fsdev/*.pod scsi/*.pod
 	rm -f qemu-img-cmds.h
 	rm -f ui/shader/*-vert.h ui/shader/*-frag.h
-	@# May not be present in GENERATED_FILES
+	@# May not be present in generated-files-y
 	rm -f trace/generated-tracers-dtrace.dtrace*
 	rm -f trace/generated-tracers-dtrace.h*
-	rm -f $(foreach f,$(GENERATED_FILES),$(f) $(f)-timestamp)
+	rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
 	rm -f qapi-gen-timestamp
 	rm -rf qga/qapi-generated
 	for d in $(ALL_SUBDIRS); do \
@@ -1062,7 +1060,7 @@ endif # CONFIG_WIN
 # rebuilt before other object files
 ifneq ($(wildcard config-host.mak),)
 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
-Makefile: $(GENERATED_FILES)
+Makefile: $(generated-files-y)
 endif
 endif
 
diff --git a/Makefile.target b/Makefile.target
index ae02495..fdbe7c8 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -166,7 +166,7 @@ else
 obj-y += hw/$(TARGET_BASE_ARCH)/
 endif
 
-GENERATED_FILES += hmp-commands.h hmp-commands-info.h
+generated-files-y += hmp-commands.h hmp-commands-info.h
 
 endif # CONFIG_SOFTMMU
 
@@ -236,5 +236,5 @@ ifdef CONFIG_TRACE_SYSTEMTAP
 	$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
 endif
 
-GENERATED_FILES += config-target.h
-Makefile: $(GENERATED_FILES)
+generated-files-y += config-target.h
+Makefile: $(generated-files-y)
diff --git a/target/s390x/Makefile.objs b/target/s390x/Makefile.objs
index 68eeee3..312bf4f 100644
--- a/target/s390x/Makefile.objs
+++ b/target/s390x/Makefile.objs
@@ -12,7 +12,7 @@ obj-$(call lnot,$(CONFIG_TCG)) += tcg-stub.o
 feat-src = $(SRC_PATH)/target/$(TARGET_BASE_ARCH)/
 feat-dst = $(BUILD_DIR)/$(TARGET_DIR)
 ifneq ($(MAKECMDGOALS),clean)
-GENERATED_FILES += $(feat-dst)gen-features.h
+generated-files-y += $(feat-dst)gen-features.h
 endif
 
 $(feat-dst)gen-features.h: $(feat-dst)gen-features.h-timestamp
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 60de085..ad95a14 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -468,19 +468,19 @@ qapi-schema += unknown-expr-key.json
 
 check-qapi-schema-y := $(addprefix tests/qapi-schema/, $(qapi-schema))
 
-GENERATED_FILES += tests/test-qapi-types.h \
-	tests/include/test-qapi-types-sub-module.h \
-	tests/test-qapi-types-sub-sub-module.h \
-	tests/test-qapi-visit.h \
-	tests/include/test-qapi-visit-sub-module.h \
-	tests/test-qapi-visit-sub-sub-module.h \
-	tests/test-qapi-commands.h \
-	tests/include/test-qapi-commands-sub-module.h \
-	tests/test-qapi-commands-sub-sub-module.h \
-	tests/test-qapi-events.h \
-	tests/include/test-qapi-events-sub-module.h \
-	tests/test-qapi-events-sub-sub-module.h \
-	tests/test-qapi-introspect.h
+generated-files-y += tests/test-qapi-types.h
+generated-files-y += tests/include/test-qapi-types-sub-module.h
+generated-files-y += tests/test-qapi-types-sub-sub-module.h
+generated-files-y += tests/test-qapi-visit.h
+generated-files-y += tests/include/test-qapi-visit-sub-module.h
+generated-files-y += tests/test-qapi-visit-sub-sub-module.h
+generated-files-y += tests/test-qapi-commands.h
+generated-files-y += tests/include/test-qapi-commands-sub-module.h
+generated-files-y += tests/test-qapi-commands-sub-sub-module.h
+generated-files-y += tests/test-qapi-events.h
+generated-files-y += tests/include/test-qapi-events-sub-module.h
+generated-files-y += tests/test-qapi-events-sub-sub-module.h
+generated-files-y += tests/test-qapi-introspect.h
 
 QEMU_CFLAGS += -I$(SRC_PATH)/tests
 
-- 
1.8.3.1




  parent reply	other threads:[~2019-05-15 21:10 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15 20:50 [Qemu-devel] [PULL 00/21] Misc patches for 2019-05-15 Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 01/21] hw/input: Add a CONFIG_PS2 switch for the ps2.c file Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 02/21] roms: assert if max rom size is less than the used size Paolo Bonzini
2019-05-16 12:40   ` Thomas Huth
2019-05-15 20:50 ` [Qemu-devel] [PULL 03/21] Declare -realtime as deprecated Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 04/21] vl: Add missing descriptions to the VGA adapters list Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 05/21] megasas: fix mapped frame size Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 06/21] hvf: Add missing break statement Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 07/21] vl: fix -sandbox parsing crash when seccomp support is disabled Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 08/21] memory: correct the comment to DIRTY_MEMORY_MIGRATION Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 09/21] hw/acpi/piix4: Move TYPE_PIIX4_PM to a public header Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 10/21] hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 11/21] hw/i386/acpi: Assert a pointer is not null BEFORE using it Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 12/21] mips-fulong2e: obey -vga none Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 13/21] sun4m: " Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 14/21] trace: only include trace-event-subdirs when they are needed Paolo Bonzini
2019-05-15 20:50 ` Paolo Bonzini [this message]
2019-05-15 20:50 ` [Qemu-devel] [PULL 16/21] configure: qemu-ga is only needed with softmmu targets Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 17/21] build: chardev is only needed for " Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 18/21] build: don't build hardware objects with linux-user Paolo Bonzini
2019-05-21 11:52   ` Daniel P. Berrangé
2019-05-21 12:52     ` Laurent Vivier
2019-05-21 12:54       ` Daniel P. Berrangé
2019-05-21 20:16         ` Laurent Vivier
2019-07-04 13:09           ` Philippe Mathieu-Daudé
2019-05-15 20:50 ` [Qemu-devel] [PULL 19/21] ioapic: allow buggy guests mishandling level-triggered interrupts to make progress Paolo Bonzini
2019-07-04 12:57   ` Marc-André Lureau
2019-07-04 13:00     ` Li Qiang
2019-07-04 13:05       ` Marc-André Lureau
2019-07-04 13:13         ` Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 20/21] hw/char: Move multi-serial devices into separate file Paolo Bonzini
2019-05-15 20:50 ` [Qemu-devel] [PULL 21/21] hw/net/ne2000: Extract the PCI device from the chipset common code Paolo Bonzini
2019-05-16 12:14 ` [Qemu-devel] [PULL 00/21] Misc patches for 2019-05-15 Peter Maydell
2019-05-16 17:58   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557953433-19663-16-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).