[Qemu-devel] [PATCH v6 0/2] tests: acpi: ARM testing support

[Qemu-devel] [PATCH v6 0/2] tests: acpi: ARM testing support

[Igor Mammedov]

Changelog:
  - from v4:
     * uefi support has been merged already, but only ARM part wasn't due to
       test failing on ARM 32 bit host. It turned out that's aarch64 TCG issue
       on 32-bit ARM host. Blacklist aarch64 test on 32 bit ARM host for now.

Series adds reference tables and a ACPI test case for arm/virt machine

CC: Laszlo Ersek <lersek@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Gonglei <arei.gonglei@huawei.com>
CC: Philippe Mathieu-Daudé <philmd@redhat.com>
CC: Shannon Zhao <shannon.zhaosl@gmail.com>
CC: Wei Yang <richardw.yang@linux.intel.com>
CC: Andrew Jones <drjones@redhat.com>
CC: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
CC: Ben Warren <ben@skyportsystems.com>

Igor Mammedov (2):
  tests: add expected ACPI tables for arm/virt board
  tests: acpi: add simple arm/virt testcase

 tests/Makefile.include                  |   4 ++++
 tests/bios-tables-test.c                |  18 ++++++++++++++++++
 tests/data/acpi/rebuild-expected-aml.sh |   2 +-
 tests/data/acpi/virt/APIC               | Bin 0 -> 168 bytes
 tests/data/acpi/virt/DSDT               | Bin 0 -> 18476 bytes
 tests/data/acpi/virt/FACP               | Bin 0 -> 268 bytes
 tests/data/acpi/virt/GTDT               | Bin 0 -> 96 bytes
 tests/data/acpi/virt/MCFG               | Bin 0 -> 60 bytes
 tests/data/acpi/virt/SPCR               | Bin 0 -> 80 bytes
 9 files changed, 23 insertions(+), 1 deletion(-)
 create mode 100644 tests/data/acpi/virt/APIC
 create mode 100644 tests/data/acpi/virt/DSDT
 create mode 100644 tests/data/acpi/virt/FACP
 create mode 100644 tests/data/acpi/virt/GTDT
 create mode 100644 tests/data/acpi/virt/MCFG
 create mode 100644 tests/data/acpi/virt/SPCR

-- 
2.7.4

[Qemu-devel] [PATCH v6 1/2] tests: add expected ACPI tables for arm/virt board

[Igor Mammedov]

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
this patch is ahead fo "tests: acpi: add simple  arm/virt testcase"
to keep 'make check' working during bisection and not to pollute
code with binary blobs which are not reviewable.

 tests/data/acpi/virt/APIC | Bin 0 -> 168 bytes
 tests/data/acpi/virt/DSDT | Bin 0 -> 18476 bytes
 tests/data/acpi/virt/FACP | Bin 0 -> 268 bytes
 tests/data/acpi/virt/GTDT | Bin 0 -> 96 bytes
 tests/data/acpi/virt/MCFG | Bin 0 -> 60 bytes
 tests/data/acpi/virt/SPCR | Bin 0 -> 80 bytes
 6 files changed, 0 insertions(+), 0 deletions(-)
 create mode 100644 tests/data/acpi/virt/APIC
 create mode 100644 tests/data/acpi/virt/DSDT
 create mode 100644 tests/data/acpi/virt/FACP
 create mode 100644 tests/data/acpi/virt/GTDT
 create mode 100644 tests/data/acpi/virt/MCFG
 create mode 100644 tests/data/acpi/virt/SPCR

diff --git a/tests/data/acpi/virt/APIC b/tests/data/acpi/virt/APIC
new file mode 100644
index 0000000000000000000000000000000000000000..797dfde2841c51b7e72065602e99ce1714347f0d
GIT binary patch
literal 168
zcmZ<^@N{0mz`($~*~#D8BUr&HBEZ=ZD8>jB1F=Cg4Dd+6SPUF6788)c?E~X6Fu>G{
hBZPn~MyPrgD9sGlkD?67;f3451Xcqw&w(L;0RYV=2>}2A

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT
new file mode 100644
index 0000000000000000000000000000000000000000..20e85c7f89f645c69935c615c07084e221419960
GIT binary patch
literal 18476
zcmc)ScU)EVAII^7km3at6myGa+R|dUS|(gjDG>rqi;BuJN5jfYEla7?tSq%Xt!(eT
zr!AYd_uhN&!S8+U(D&=t`StIw9$oH>d%mB0pK#D~&LeJRL*=*uql2K;?26j>=!V`E
z6YJuY`dmg31mXSgWB#J~S-UqiR5Ud<cZ(Mn7iTw(uCB~0kJnWzh6dS9<Etx!#^$Q5
zcx_Gk!TOrf#l<BhsRy&0;`I#$-C~^=whh9GZG-$EIH7frk<mvrM_ZLw*5`%~G&Yxv
z9Mh1RGG=Ujt)>jdl!92h)D&$WWX;hthf7M5uZl}Dl25#TNmhEvu#pquBa=&ZuBsU?
zNU5HsVO)7EM{DBc|GlzR+b&ufK3RFzF7@fJLGsy(?FFt|xgHw}TBWeXJ_0W|JtBPC
ze~f4qtRGR58c`9xic&YHN5oo1&B(GDr9Pu9az<v<jMg@z%x4UWoRJkZBim*S@)?68
zXKWBPBW5!O`-~xxGg?Q@$h8?me8$ko8Ev9ww6hsQea5iJ8QD=Y@@>X2pRsl1jJ8oT
zI@pY@ZAJ-xjMnWRv8Wk^He(x~5xJZ4ha|nLZ)h{N^%>FoX>Qc(=wdUr^BK|mX<pQf
zZZ>0kpAo&Ewu_q4!)6Tk8PWS``=}YcY{m{gBYHp0kDAfjW{mI|(fesZ)QpX6M!C<3
z-cLJ3&DhvxRQQbO{j_7$jQ%zwZZk@w_tV0t8JpUSN}mzEpLU9xvANBt@)^<l>4s4=
z2H1>|J|lWR?Hn~@OPevuXGHI(U7}_b+YJ3Rp7<Lo{JWtvdOz(NHKWvKRQrtR{j^)u
zj6pVIN1qYBpLUO$F~nx<<TIl8(;iVXhS`iUJ|lWR?HM&=8=FyMGs>d((_T?CwzC;y
zeMa<tS`;;7xXq|d%~<euW?j5G^+M{#))ki*57U85TnA*yDhm%|sz&LyqGGIWbzr4i
z9iiog>%s@e)fW`SdejB+pgPzu=p7X6ze?Sk6-*5#>0_Xck_RDm_2W7&y)ZK;$m)=j
zmDAD^jB3z`<oyiYF9|y2hM$kMQk146Q&ARl$ji!YX~_t}HQFv!;VNy|F8Nquoi<Hp
zxKi^I+v=DpxoxV#mFZ1&KomZsHchNlhAY$0l9^bUeg&C9xH7$IW^$!AO{`RgEA@&J
z&!VHl<hH3w855i804k+Sr#m-*bA!ZlrkxukSEgUQ(w(j0)FH86L3&diaJf_I&Ngti
zfwK*rN_S?%nVndf{*veb&7DejwuMs%^U1GX;!Dz&PNh3zaK_-&0i8RQ?#zKR2hJQi
zmG0CTg?&GB;nV@3JC*LtgEJ4#JUW%`YzJpMICa42PNh5B!`U9r_H-)Usgo&l=EJE2
zOm`~XSpa7NoCS0$-Pr-o4shy#)SXIqc7(GdoE_;@y0Z|@LO68*>rSORJHgor&Q5eH
z-MJy08^WmrUUw?p*%{8xaCW9s=}w($+V`^yoH{^ur_!BW;p_@$S2~sM>;`8yICVhn
zPNh4$!`U6q?sO{M*#piVaOwcuol1B1gtI4{J?T`svlpDb;M4)TJC*J%g0l$DB081s
z><wpcICX&UPNh5hz}W}RK6EPGxe=Tj!Ko7hcPic47tX$L_N7zl&W+*R7*3r)xKruQ
zesK1Kvmc#GclL*~Kb$(@aHrCpo4~mVoSV?8bmyjUZVIPPP~53>=Vowj2IppUD&4s`
zoSVa`6B>6a-MIyvTfn&mol18OfO7zxIstO0(wzh090=z?I+gC+63#8*)CrS2mG0aM
z&aL3wicY0FbzRQ>ye)=PCs^)Ox>J|qv@(6<SpsJXol1A=BAiyHk337^)Crk8mG0D~
zH?2$`-<H8yMyJx9y5MHcL2&8>&Yenk>N1--2g5m-PNh3_am}1V;M579JC*L#B{g#n
zg>xvKN_Xl)nmLETsS`wZD&48eXXe}*&aLTGx>Fa;%()GmI-zu@(w(|gX3lNl+?GzI
zJ9UA~oZG>v6Hs?5-KooB=G-36?depyQy0U`IUG)%u)0&}PF(^s=MHf0K&R53Bj6kX
z=LkBL?ktD19L{n&mG0C<E^}7ESwW}Low~GT&N!TLI+gC!1ud;ip8;3GSxKkTow|&r
zmFYi+s^F}mQ|V4!yfWuVI7iZ{bf+#^nR67Jqv%w+Qx~etIU3H<bSmAc%Twm8hO?SZ
zr8{*|%A7mGxg(uQcj{7<Id_6{Cpwkx)CDMWj)8Lwol1A=vXeP$;H;rj=}uj2GUr%0
z$I_{Er!Fy>vlh-;I+gCMgR>6KIy#l^+!@ZD;oO-{r9124tcSCnPNh2=;B0`iflj46
z$H6%c&T(`q-8ml4@o<i(Q|ZoK;M@hyUFcN0a{`<b;G96G(w!6GoCxPcI+gC+70zAZ
z+?7tHJ9mR~H#m2rQ|Zn|I2++?q*Lk6-QnCF&fV!$x^oXW_keQ`I+gC+6V5&1+>=hF
zJDcEag0qQEr91b6b1yjeqEqS4z2V#&&b{eWx^o{m_knXCI+gC61m`3;C()^N=e}_6
z3+KLcD&488-uCD1esJzbr_!C1;hYTTWIC1Z+#k;U;oP52r8}p<IR(xsbSm9B70#(}
zPNh@n&S`K?gL4|4N_S3&b2^;U=~TM&05}hT^8h-P?mQ6A1K~W7PNh2!g7Y9a5291)
z&V%7R7|w&~RJwBpoHO8@L8sE4hroFVoQKe<bmyUP9t!87bSm9>7@UW}c^I8acg}=!
zCY&?rRJ!wUI1h*Oa5|OloCW7BIA_tRbmtLp9s%bObSm9B8_wBq&Zbl8&N*<-fpZR>
zN_WnMb1s~7=~TM&NH~v#^GG_C?mP<4qu@M>PNh5N!8s4kd2}k>c{H3y!+A8FN_QRu
z=P_^|L#NW6^WmHi=X^Sq?py%p0yr1YsdQ&EoXv1H)2Vdlv2Y#>=dpAu-FY0G$H93V
zol18e59jf49#5yzoeSYy2<JjNmF`>w=OQ>4(W!LjVmKGWxtLC+J5PY~1UOHiQ|Znn
za4vy!37txJo(SiOaGpq~(w!&4c@mr_(W!Lj$#9+w=gD*`-MJLbrEo5#Q|ZoA;5-G+
zQ|MH>^Hexbh4WN8mF`>y=Q22#(W!LjayXa6xtva=J6FKD0?rk5D&2V+oTtHg8l6ga
zo(|{faGp-5(w%3(c?O(k(5ZCinQ)#7=b3aW-FX(AXTf<Eol19}4d>Z#o=vCHo#()L
z4xH!EsdVSLaGne2xpXSsc^;hS!Fe8?N_U<Q=lO7+Pp8tI7r=P|oEOlkbmxU|UI^!f
zbSmAs63&%yuB21x&Wqr@2+oV>RJ!wGI4_3tVmg)Xyadim;Jk!Rr8`%_xeCrzbSm9>
zDV&$Wc`2PrcU}hPWpG|br_!C5!+ANJm(!_q=M`{X0p}HTD&2V{oL9nmC7nulUIph>
za9%~H(w$esc{Q9@)2VdlHE>=7=QVUH-FYpX*TQ)%ol19J2j_KgUPq_Wo!7&8J)GCm
zsdVQJaNYpt4Rk8qc_W-R!g(W|N_XA_=S^_lM5of7H^X@|oHx^{bmuK_-U8<>bSm9>
zE1b8&c`Kbtcisl)ZE)U3r_!Cb!+ATLx6`R~=N)j~0p}fbD&2V}oOi-`C!I=n-Ua7f
zaNb3y(w%q1c{iMQ)2VdlJ#gLw=RI^P-FYvZ_riHEol1A!2j_io-bbg>o%h3eKb-f|
zsdVQ9a6SO%19U3g`5>GR!ucSbN_Rd4=R<HlM5of7tKnP?=W05Y?tB=|hv9sfPNh2^
zf%6eKAE8s}&PU;V6wXKKRJ!vqI3I)aF*=p*d>qcl;e4D<r90QaxdzTPbSmBX1e{O6
z`2?LxcRmT{lW;ysr_!BI!TA)NPtmD#=hJXL4d>HzD&6@EoX^1d44q1MJ`3lwa6U_?
z(w%GJTnpz~I+gBx4$kM`e2z|~JD-R1c{rb^Q|ZnZ;Cunj7wA;F^F=scg!4r@mF|2A
z&X?ePiB6?EUxxE#IA5ky>CRW+d<D)|=v2D%RXAUT^Hn;P?tBf-*Wi4OPNh3vhx2tf
zU#C;)&NtwE1I{<-RJ!v`INyZxO*)nCd<)LE;Czctr90n-^KCfarc>$8ci?;n&Uffk
zy7OH)--YvCI+gBx56<`Ce2-40JKu-%eK_BzQ|ZnR;QRp259n07^Fug4g!4l>mG1lq
z&X3^yh)$(DKZf&TI6tOS>CR8!`~=QV=v2D%Q#e0`^HVyN?)(hS&*1!wPNh3Phx2nd
zKc`da&M)Bn0?se!RJ!v^IKPDROFEVA{0h#m;QWeCr8~cd^J_T2rc>$8Z{Yj}&Tr^c
zy7OB&zlHN#I+gDH4$kl3{EkkgJHLnXdpN(RQ|Znh;QRs3ALvxN^G7&;g!4x_mG1lr
z&Y$4?iB6?Ee}?mCIDe*7>CRu^`~}Wm=v2D%S2%x#^H(~R?)(kT-{Aa>PNh44hx2zh
zf2ULF&OhM%1I|C_RJ!v|IRAw6Pdb(E{0q*%;QWhDr91zI^KUr+rc>$87C2krY@t(`
zbT&3uXX$^8vEMh17mrN-KB;c&^rjx|VmXO7^5`2R-^e3;qYr+ruys>IeM3fSRO<I%
z!(UeYU!yjT7?u1SN2PvU``<?Oix`#s97m;oYy00u^^X{p{9I~OVSZD*qC8mDP8;Tr
z&`n`&`|y2Fg6#T=@goaHw~5VMoENmp)gwWmZ$=PgEb1Htxf$VI{gdC)^7ruM-Igu&
zNJegEvb1$#^A<gt5iHrl)+9EVuiKXJpY-ObkKyO%1grjU&z#*bzOF9Fj*qJ!6BLeZ
z+f>^S&ss7)h*wT1Svj`NiYWyhWBH9WZ<PH~)MLaM6K0k_u>C8OmrRdkX@gRI%+|-U
z8DWHT!aHT*s2N9wx3Qi<_+e#-<twIU%$TPKOJdo{(Os6WShsERf&9b+Gr|SoBdexg
zl%HCXm3U;;^umEnl?^pnEBhp0)!LzJK57^|w`N)A&uhA_j@PVgyJDKYkeL}7;f>w|
zCa1oxxGDL|)s4+HS@l)vx2#F-LE(GJgg*#nvEqMxyAr#GzF9>hQs1W3hy3tk_y#kh
z+l;EKP5s1`C*DVANccWF>wb|tH9P&T8$ss!chlJ<F+$r`RTuP)^**V)_Lt<pdO-VH
q*Pxf~WCr0A=(!5>nyQM+f`xSx>MLUN8=H&5JIVJQNjl<q-v0n?ptJx0

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP
new file mode 100644
index 0000000000000000000000000000000000000000..27de99f51bfe846b1f8796ace49d83f5b33a1aed
GIT binary patch
literal 268
ycmZ>BbPnKQWME+3?d0$55v<@85#a0w6axw|fY>0Kx<CNcIA#XwTY+i=(L4a*H3tCz

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT
new file mode 100644
index 0000000000000000000000000000000000000000..10107a65e958ff6495bb8c17d63d0539690f59f6
GIT binary patch
literal 96
zcmZ<{aS2IaU|?Xn>E!S15v<@85#a0&6k`O6f!H7#8OTC8azL5|h^3)?DJYFj0RVOU
B2mt^9

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/MCFG b/tests/data/acpi/virt/MCFG
new file mode 100644
index 0000000000000000000000000000000000000000..e8987e1af0ec3829770bf4fe11fab02b06160dd2
GIT binary patch
literal 60
scmeZuc5}C3U|?YMck*}k2v%^42ypfViZKGkKx`0=1Oyx)oc|yS05YNo0RR91

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/SPCR b/tests/data/acpi/virt/SPCR
new file mode 100644
index 0000000000000000000000000000000000000000..377271a0e7817cc21a28c02123a89facad63604f
GIT binary patch
literal 80
zcmWFza1IJ!U|?VpcJg=j2v%^42yhMtiZKGkKx`1r48#l^3?L>agsBLmm>C$E7#RKo
I0Z0r60QF4^0RR91

literal 0
HcmV?d00001

-- 
2.7.4

[Qemu-devel] [PULL v3 15/17] tests: add expected ACPI tables for arm/virt board

[Michael S. Tsirkin]

From: Igor Mammedov <imammedo@redhat.com>

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1559560929-260254-2-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/data/acpi/virt/APIC | Bin 0 -> 168 bytes
 tests/data/acpi/virt/DSDT | Bin 0 -> 18476 bytes
 tests/data/acpi/virt/FACP | Bin 0 -> 268 bytes
 tests/data/acpi/virt/GTDT | Bin 0 -> 96 bytes
 tests/data/acpi/virt/MCFG | Bin 0 -> 60 bytes
 tests/data/acpi/virt/SPCR | Bin 0 -> 80 bytes
 6 files changed, 0 insertions(+), 0 deletions(-)
 create mode 100644 tests/data/acpi/virt/APIC
 create mode 100644 tests/data/acpi/virt/DSDT
 create mode 100644 tests/data/acpi/virt/FACP
 create mode 100644 tests/data/acpi/virt/GTDT
 create mode 100644 tests/data/acpi/virt/MCFG
 create mode 100644 tests/data/acpi/virt/SPCR

diff --git a/tests/data/acpi/virt/APIC b/tests/data/acpi/virt/APIC
new file mode 100644
index 0000000000000000000000000000000000000000..797dfde2841c51b7e72065602e99ce1714347f0d
GIT binary patch
literal 168
zcmZ<^@N{0mz`($~*~#D8BUr&HBEZ=ZD8>jB1F=Cg4Dd+6SPUF6788)c?E~X6Fu>G{
hBZPn~MyPrgD9sGlkD?67;f3451Xcqw&w(L;0RYV=2>}2A

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT
new file mode 100644
index 0000000000000000000000000000000000000000..20e85c7f89f645c69935c615c07084e221419960
GIT binary patch
literal 18476
zcmc)ScU)EVAII^7km3at6myGa+R|dUS|(gjDG>rqi;BuJN5jfYEla7?tSq%Xt!(eT
zr!AYd_uhN&!S8+U(D&=t`StIw9$oH>d%mB0pK#D~&LeJRL*=*uql2K;?26j>=!V`E
z6YJuY`dmg31mXSgWB#J~S-UqiR5Ud<cZ(Mn7iTw(uCB~0kJnWzh6dS9<Etx!#^$Q5
zcx_Gk!TOrf#l<BhsRy&0;`I#$-C~^=whh9GZG-$EIH7frk<mvrM_ZLw*5`%~G&Yxv
z9Mh1RGG=Ujt)>jdl!92h)D&$WWX;hthf7M5uZl}Dl25#TNmhEvu#pquBa=&ZuBsU?
zNU5HsVO)7EM{DBc|GlzR+b&ufK3RFzF7@fJLGsy(?FFt|xgHw}TBWeXJ_0W|JtBPC
ze~f4qtRGR58c`9xic&YHN5oo1&B(GDr9Pu9az<v<jMg@z%x4UWoRJkZBim*S@)?68
zXKWBPBW5!O`-~xxGg?Q@$h8?me8$ko8Ev9ww6hsQea5iJ8QD=Y@@>X2pRsl1jJ8oT
zI@pY@ZAJ-xjMnWRv8Wk^He(x~5xJZ4ha|nLZ)h{N^%>FoX>Qc(=wdUr^BK|mX<pQf
zZZ>0kpAo&Ewu_q4!)6Tk8PWS``=}YcY{m{gBYHp0kDAfjW{mI|(fesZ)QpX6M!C<3
z-cLJ3&DhvxRQQbO{j_7$jQ%zwZZk@w_tV0t8JpUSN}mzEpLU9xvANBt@)^<l>4s4=
z2H1>|J|lWR?Hn~@OPevuXGHI(U7}_b+YJ3Rp7<Lo{JWtvdOz(NHKWvKRQrtR{j^)u
zj6pVIN1qYBpLUO$F~nx<<TIl8(;iVXhS`iUJ|lWR?HM&=8=FyMGs>d((_T?CwzC;y
zeMa<tS`;;7xXq|d%~<euW?j5G^+M{#))ki*57U85TnA*yDhm%|sz&LyqGGIWbzr4i
z9iiog>%s@e)fW`SdejB+pgPzu=p7X6ze?Sk6-*5#>0_Xck_RDm_2W7&y)ZK;$m)=j
zmDAD^jB3z`<oyiYF9|y2hM$kMQk146Q&ARl$ji!YX~_t}HQFv!;VNy|F8Nquoi<Hp
zxKi^I+v=DpxoxV#mFZ1&KomZsHchNlhAY$0l9^bUeg&C9xH7$IW^$!AO{`RgEA@&J
z&!VHl<hH3w855i804k+Sr#m-*bA!ZlrkxukSEgUQ(w(j0)FH86L3&diaJf_I&Ngti
zfwK*rN_S?%nVndf{*veb&7DejwuMs%^U1GX;!Dz&PNh3zaK_-&0i8RQ?#zKR2hJQi
zmG0CTg?&GB;nV@3JC*LtgEJ4#JUW%`YzJpMICa42PNh5B!`U9r_H-)Usgo&l=EJE2
zOm`~XSpa7NoCS0$-Pr-o4shy#)SXIqc7(GdoE_;@y0Z|@LO68*>rSORJHgor&Q5eH
z-MJy08^WmrUUw?p*%{8xaCW9s=}w($+V`^yoH{^ur_!BW;p_@$S2~sM>;`8yICVhn
zPNh4$!`U6q?sO{M*#piVaOwcuol1B1gtI4{J?T`svlpDb;M4)TJC*J%g0l$DB081s
z><wpcICX&UPNh5hz}W}RK6EPGxe=Tj!Ko7hcPic47tX$L_N7zl&W+*R7*3r)xKruQ
zesK1Kvmc#GclL*~Kb$(@aHrCpo4~mVoSV?8bmyjUZVIPPP~53>=Vowj2IppUD&4s`
zoSVa`6B>6a-MIyvTfn&mol18OfO7zxIstO0(wzh090=z?I+gC+63#8*)CrS2mG0aM
z&aL3wicY0FbzRQ>ye)=PCs^)Ox>J|qv@(6<SpsJXol1A=BAiyHk337^)Crk8mG0D~
zH?2$`-<H8yMyJx9y5MHcL2&8>&Yenk>N1--2g5m-PNh3_am}1V;M579JC*L#B{g#n
zg>xvKN_Xl)nmLETsS`wZD&48eXXe}*&aLTGx>Fa;%()GmI-zu@(w(|gX3lNl+?GzI
zJ9UA~oZG>v6Hs?5-KooB=G-36?depyQy0U`IUG)%u)0&}PF(^s=MHf0K&R53Bj6kX
z=LkBL?ktD19L{n&mG0C<E^}7ESwW}Low~GT&N!TLI+gC!1ud;ip8;3GSxKkTow|&r
zmFYi+s^F}mQ|V4!yfWuVI7iZ{bf+#^nR67Jqv%w+Qx~etIU3H<bSmAc%Twm8hO?SZ
zr8{*|%A7mGxg(uQcj{7<Id_6{Cpwkx)CDMWj)8Lwol1A=vXeP$;H;rj=}uj2GUr%0
z$I_{Er!Fy>vlh-;I+gCMgR>6KIy#l^+!@ZD;oO-{r9124tcSCnPNh2=;B0`iflj46
z$H6%c&T(`q-8ml4@o<i(Q|ZoK;M@hyUFcN0a{`<b;G96G(w!6GoCxPcI+gC+70zAZ
z+?7tHJ9mR~H#m2rQ|Zn|I2++?q*Lk6-QnCF&fV!$x^oXW_keQ`I+gC+6V5&1+>=hF
zJDcEag0qQEr91b6b1yjeqEqS4z2V#&&b{eWx^o{m_knXCI+gC61m`3;C()^N=e}_6
z3+KLcD&488-uCD1esJzbr_!C1;hYTTWIC1Z+#k;U;oP52r8}p<IR(xsbSm9B70#(}
zPNh@n&S`K?gL4|4N_S3&b2^;U=~TM&05}hT^8h-P?mQ6A1K~W7PNh2!g7Y9a5291)
z&V%7R7|w&~RJwBpoHO8@L8sE4hroFVoQKe<bmyUP9t!87bSm9>7@UW}c^I8acg}=!
zCY&?rRJ!wUI1h*Oa5|OloCW7BIA_tRbmtLp9s%bObSm9B8_wBq&Zbl8&N*<-fpZR>
zN_WnMb1s~7=~TM&NH~v#^GG_C?mP<4qu@M>PNh5N!8s4kd2}k>c{H3y!+A8FN_QRu
z=P_^|L#NW6^WmHi=X^Sq?py%p0yr1YsdQ&EoXv1H)2Vdlv2Y#>=dpAu-FY0G$H93V
zol18e59jf49#5yzoeSYy2<JjNmF`>w=OQ>4(W!LjVmKGWxtLC+J5PY~1UOHiQ|Znn
za4vy!37txJo(SiOaGpq~(w!&4c@mr_(W!Lj$#9+w=gD*`-MJLbrEo5#Q|ZoA;5-G+
zQ|MH>^Hexbh4WN8mF`>y=Q22#(W!LjayXa6xtva=J6FKD0?rk5D&2V+oTtHg8l6ga
zo(|{faGp-5(w%3(c?O(k(5ZCinQ)#7=b3aW-FX(AXTf<Eol19}4d>Z#o=vCHo#()L
z4xH!EsdVSLaGne2xpXSsc^;hS!Fe8?N_U<Q=lO7+Pp8tI7r=P|oEOlkbmxU|UI^!f
zbSmAs63&%yuB21x&Wqr@2+oV>RJ!wGI4_3tVmg)Xyadim;Jk!Rr8`%_xeCrzbSm9>
zDV&$Wc`2PrcU}hPWpG|br_!C5!+ANJm(!_q=M`{X0p}HTD&2V{oL9nmC7nulUIph>
za9%~H(w$esc{Q9@)2VdlHE>=7=QVUH-FYpX*TQ)%ol19J2j_KgUPq_Wo!7&8J)GCm
zsdVQJaNYpt4Rk8qc_W-R!g(W|N_XA_=S^_lM5of7H^X@|oHx^{bmuK_-U8<>bSm9>
zE1b8&c`Kbtcisl)ZE)U3r_!Cb!+ATLx6`R~=N)j~0p}fbD&2V}oOi-`C!I=n-Ua7f
zaNb3y(w%q1c{iMQ)2VdlJ#gLw=RI^P-FYvZ_riHEol1A!2j_io-bbg>o%h3eKb-f|
zsdVQ9a6SO%19U3g`5>GR!ucSbN_Rd4=R<HlM5of7tKnP?=W05Y?tB=|hv9sfPNh2^
zf%6eKAE8s}&PU;V6wXKKRJ!vqI3I)aF*=p*d>qcl;e4D<r90QaxdzTPbSmBX1e{O6
z`2?LxcRmT{lW;ysr_!BI!TA)NPtmD#=hJXL4d>HzD&6@EoX^1d44q1MJ`3lwa6U_?
z(w%GJTnpz~I+gBx4$kM`e2z|~JD-R1c{rb^Q|ZnZ;Cunj7wA;F^F=scg!4r@mF|2A
z&X?ePiB6?EUxxE#IA5ky>CRW+d<D)|=v2D%RXAUT^Hn;P?tBf-*Wi4OPNh3vhx2tf
zU#C;)&NtwE1I{<-RJ!v`INyZxO*)nCd<)LE;Czctr90n-^KCfarc>$8ci?;n&Uffk
zy7OH)--YvCI+gBx56<`Ce2-40JKu-%eK_BzQ|ZnR;QRp259n07^Fug4g!4l>mG1lq
z&X3^yh)$(DKZf&TI6tOS>CR8!`~=QV=v2D%Q#e0`^HVyN?)(hS&*1!wPNh3Phx2nd
zKc`da&M)Bn0?se!RJ!v^IKPDROFEVA{0h#m;QWeCr8~cd^J_T2rc>$8Z{Yj}&Tr^c
zy7OB&zlHN#I+gDH4$kl3{EkkgJHLnXdpN(RQ|Znh;QRs3ALvxN^G7&;g!4x_mG1lr
z&Y$4?iB6?Ee}?mCIDe*7>CRu^`~}Wm=v2D%S2%x#^H(~R?)(kT-{Aa>PNh44hx2zh
zf2ULF&OhM%1I|C_RJ!v|IRAw6Pdb(E{0q*%;QWhDr91zI^KUr+rc>$87C2krY@t(`
zbT&3uXX$^8vEMh17mrN-KB;c&^rjx|VmXO7^5`2R-^e3;qYr+ruys>IeM3fSRO<I%
z!(UeYU!yjT7?u1SN2PvU``<?Oix`#s97m;oYy00u^^X{p{9I~OVSZD*qC8mDP8;Tr
z&`n`&`|y2Fg6#T=@goaHw~5VMoENmp)gwWmZ$=PgEb1Htxf$VI{gdC)^7ruM-Igu&
zNJegEvb1$#^A<gt5iHrl)+9EVuiKXJpY-ObkKyO%1grjU&z#*bzOF9Fj*qJ!6BLeZ
z+f>^S&ss7)h*wT1Svj`NiYWyhWBH9WZ<PH~)MLaM6K0k_u>C8OmrRdkX@gRI%+|-U
z8DWHT!aHT*s2N9wx3Qi<_+e#-<twIU%$TPKOJdo{(Os6WShsERf&9b+Gr|SoBdexg
zl%HCXm3U;;^umEnl?^pnEBhp0)!LzJK57^|w`N)A&uhA_j@PVgyJDKYkeL}7;f>w|
zCa1oxxGDL|)s4+HS@l)vx2#F-LE(GJgg*#nvEqMxyAr#GzF9>hQs1W3hy3tk_y#kh
z+l;EKP5s1`C*DVANccWF>wb|tH9P&T8$ss!chlJ<F+$r`RTuP)^**V)_Lt<pdO-VH
q*Pxf~WCr0A=(!5>nyQM+f`xSx>MLUN8=H&5JIVJQNjl<q-v0n?ptJx0

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP
new file mode 100644
index 0000000000000000000000000000000000000000..27de99f51bfe846b1f8796ace49d83f5b33a1aed
GIT binary patch
literal 268
ycmZ>BbPnKQWME+3?d0$55v<@85#a0w6axw|fY>0Kx<CNcIA#XwTY+i=(L4a*H3tCz

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT
new file mode 100644
index 0000000000000000000000000000000000000000..10107a65e958ff6495bb8c17d63d0539690f59f6
GIT binary patch
literal 96
zcmZ<{aS2IaU|?Xn>E!S15v<@85#a0&6k`O6f!H7#8OTC8azL5|h^3)?DJYFj0RVOU
B2mt^9

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/MCFG b/tests/data/acpi/virt/MCFG
new file mode 100644
index 0000000000000000000000000000000000000000..e8987e1af0ec3829770bf4fe11fab02b06160dd2
GIT binary patch
literal 60
scmeZuc5}C3U|?YMck*}k2v%^42ypfViZKGkKx`0=1Oyx)oc|yS05YNo0RR91

literal 0
HcmV?d00001

diff --git a/tests/data/acpi/virt/SPCR b/tests/data/acpi/virt/SPCR
new file mode 100644
index 0000000000000000000000000000000000000000..377271a0e7817cc21a28c02123a89facad63604f
GIT binary patch
literal 80
zcmWFza1IJ!U|?VpcJg=j2v%^42yhMtiZKGkKx`1r48#l^3?L>agsBLmm>C$E7#RKo
I0Z0r60QF4^0RR91

literal 0
HcmV?d00001

-- 
MST

[Qemu-devel] [PATCH v6 2/2] tests: acpi: add simple arm/virt testcase

[Igor Mammedov]

adds simple arm/virt test case that starts guest with
bios-tables-test.aarch64.iso.qcow2 boot image which
initializes UefiTestSupport* structure in RAM once
guest is booted.

 * see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
v6:
  * Since aarch64 TCG is broken on 32 bit arm host,
    blacklist it till it's fixed
  * add aarch64 to rebuild script list
v4:
  * force test to use TCG accelerator
v3:
  * use firmware blobs directly from pc-bios directory
  * use bios-tables-test.aarch64.iso.qcow2 as test boot image
  * drop leftover qtest-uefi-images-aarch64 iMakefile rule from
    previos version (Laszlo)
  * add Makefile rule to include bios-tables-test into
    check-qtest-aarch64 target
v2:
  * specify in test_data where board's RAM starts and RAM size

 tests/Makefile.include                  |  4 ++++
 tests/bios-tables-test.c                | 18 ++++++++++++++++++
 tests/data/acpi/rebuild-expected-aml.sh |  2 +-
 3 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/tests/Makefile.include b/tests/Makefile.include
index 1865f6b..2334969 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -267,6 +267,10 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF)
 check-qtest-aarch64-y = tests/numa-test$(EXESUF)
 check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
 check-qtest-aarch64-y += tests/migration-test$(EXESUF)
+# TODO: once aarch64 TCG is fixed on ARM 32 bit host, make test unconditional
+ifneq ($(ARCH),arm)
+check-qtest-aarch64-y += tests/bios-tables-test$(EXESUF)
+endif
 
 check-qtest-microblazeel-y += $(check-qtest-microblaze-y)
 
diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 28d7d42..1242d63 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -830,6 +830,22 @@ static void test_acpi_piix4_tcg_dimm_pxm(void)
     test_acpi_tcg_dimm_pxm(MACHINE_PC);
 }
 
+static void test_acpi_virt_tcg(void)
+{
+    test_data data = {
+        .machine = "virt",
+        .accel = "tcg",
+        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",
+        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",
+        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",
+        .ram_start = 0x40000000ULL,
+        .scan_len = 128ULL * 1024 * 1024,
+    };
+
+    test_acpi_one("-cpu cortex-a57", &data);
+    free_test_data(&data);
+}
+
 int main(int argc, char *argv[])
 {
     const char *arch = qtest_get_arch();
@@ -858,6 +874,8 @@ int main(int argc, char *argv[])
         qtest_add_func("acpi/q35/numamem", test_acpi_q35_tcg_numamem);
         qtest_add_func("acpi/piix4/dimmpxm", test_acpi_piix4_tcg_dimm_pxm);
         qtest_add_func("acpi/q35/dimmpxm", test_acpi_q35_tcg_dimm_pxm);
+    } else if (strcmp(arch, "aarch64") == 0) {
+        qtest_add_func("acpi/virt", test_acpi_virt_tcg);
     }
     ret = g_test_run();
     boot_sector_cleanup(disk);
diff --git a/tests/data/acpi/rebuild-expected-aml.sh b/tests/data/acpi/rebuild-expected-aml.sh
index ff7e622..d285321 100755
--- a/tests/data/acpi/rebuild-expected-aml.sh
+++ b/tests/data/acpi/rebuild-expected-aml.sh
@@ -12,7 +12,7 @@
 # This work is licensed under the terms of the GNU GPLv2.
 # See the COPYING.LIB file in the top-level directory.
 
-qemu_bins="x86_64-softmmu/qemu-system-x86_64"
+qemu_bins="x86_64-softmmu/qemu-system-x86_64 aarch64-softmmu/qemu-system-aarch64"
 
 if [ ! -e "tests/bios-tables-test" ]; then
     echo "Test: bios-tables-test is required! Run make check before this script."
-- 
2.7.4

Re: [Qemu-devel] [PATCH v6 2/2] tests: acpi: add simple arm/virt testcase

[Laszlo Ersek]

On 06/03/19 13:22, Igor Mammedov wrote:
> adds simple arm/virt test case that starts guest with
> bios-tables-test.aarch64.iso.qcow2 boot image which
> initializes UefiTestSupport* structure in RAM once
> guest is booted.
> 
>  * see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper
> 
> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> ---
> v6:
>   * Since aarch64 TCG is broken on 32 bit arm host,
>     blacklist it till it's fixed
>   * add aarch64 to rebuild script list
> v4:
>   * force test to use TCG accelerator
> v3:
>   * use firmware blobs directly from pc-bios directory
>   * use bios-tables-test.aarch64.iso.qcow2 as test boot image
>   * drop leftover qtest-uefi-images-aarch64 iMakefile rule from
>     previos version (Laszlo)
>   * add Makefile rule to include bios-tables-test into
>     check-qtest-aarch64 target
> v2:
>   * specify in test_data where board's RAM starts and RAM size
> 
>  tests/Makefile.include                  |  4 ++++
>  tests/bios-tables-test.c                | 18 ++++++++++++++++++
>  tests/data/acpi/rebuild-expected-aml.sh |  2 +-
>  3 files changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/tests/Makefile.include b/tests/Makefile.include
> index 1865f6b..2334969 100644
> --- a/tests/Makefile.include
> +++ b/tests/Makefile.include
> @@ -267,6 +267,10 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF)
>  check-qtest-aarch64-y = tests/numa-test$(EXESUF)
>  check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
>  check-qtest-aarch64-y += tests/migration-test$(EXESUF)
> +# TODO: once aarch64 TCG is fixed on ARM 32 bit host, make test unconditional

I think you could also capture the following link here, in a comment:

# https://bugs.launchpad.net/qemu/+bug/1830872

> +ifneq ($(ARCH),arm)

Can we exclude all 32-bit host arches, not just ARM? The discussion in
LP#1830872 indicates aarch64-on-i386 can fail too (not this specific
guest payload FWIW, but the "tests/memory" test).

Other than that:

Reviewed-by: Laszlo Ersek <lersek@redhat.com>

Thanks,
Laszlo


> +check-qtest-aarch64-y += tests/bios-tables-test$(EXESUF)
> +endif
>  
>  check-qtest-microblazeel-y += $(check-qtest-microblaze-y)
>  
> diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
> index 28d7d42..1242d63 100644
> --- a/tests/bios-tables-test.c
> +++ b/tests/bios-tables-test.c
> @@ -830,6 +830,22 @@ static void test_acpi_piix4_tcg_dimm_pxm(void)
>      test_acpi_tcg_dimm_pxm(MACHINE_PC);
>  }
>  
> +static void test_acpi_virt_tcg(void)
> +{
> +    test_data data = {
> +        .machine = "virt",
> +        .accel = "tcg",
> +        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",
> +        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",
> +        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",
> +        .ram_start = 0x40000000ULL,
> +        .scan_len = 128ULL * 1024 * 1024,
> +    };
> +
> +    test_acpi_one("-cpu cortex-a57", &data);
> +    free_test_data(&data);
> +}
> +
>  int main(int argc, char *argv[])
>  {
>      const char *arch = qtest_get_arch();
> @@ -858,6 +874,8 @@ int main(int argc, char *argv[])
>          qtest_add_func("acpi/q35/numamem", test_acpi_q35_tcg_numamem);
>          qtest_add_func("acpi/piix4/dimmpxm", test_acpi_piix4_tcg_dimm_pxm);
>          qtest_add_func("acpi/q35/dimmpxm", test_acpi_q35_tcg_dimm_pxm);
> +    } else if (strcmp(arch, "aarch64") == 0) {
> +        qtest_add_func("acpi/virt", test_acpi_virt_tcg);
>      }
>      ret = g_test_run();
>      boot_sector_cleanup(disk);
> diff --git a/tests/data/acpi/rebuild-expected-aml.sh b/tests/data/acpi/rebuild-expected-aml.sh
> index ff7e622..d285321 100755
> --- a/tests/data/acpi/rebuild-expected-aml.sh
> +++ b/tests/data/acpi/rebuild-expected-aml.sh
> @@ -12,7 +12,7 @@
>  # This work is licensed under the terms of the GNU GPLv2.
>  # See the COPYING.LIB file in the top-level directory.
>  
> -qemu_bins="x86_64-softmmu/qemu-system-x86_64"
> +qemu_bins="x86_64-softmmu/qemu-system-x86_64 aarch64-softmmu/qemu-system-aarch64"
>  
>  if [ ! -e "tests/bios-tables-test" ]; then
>      echo "Test: bios-tables-test is required! Run make check before this script."
> 

Re: [Qemu-devel] [PATCH v6 2/2] tests: acpi: add simple arm/virt testcase

[Igor Mammedov]

On Mon, 3 Jun 2019 18:08:12 +0200
Laszlo Ersek <lersek@redhat.com> wrote:

> On 06/03/19 13:22, Igor Mammedov wrote:
> > adds simple arm/virt test case that starts guest with
> > bios-tables-test.aarch64.iso.qcow2 boot image which
> > initializes UefiTestSupport* structure in RAM once
> > guest is booted.
> > 
> >  * see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper
> > 
> > Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> > ---
> > v6:
> >   * Since aarch64 TCG is broken on 32 bit arm host,
> >     blacklist it till it's fixed
> >   * add aarch64 to rebuild script list
> > v4:
> >   * force test to use TCG accelerator
> > v3:
> >   * use firmware blobs directly from pc-bios directory
> >   * use bios-tables-test.aarch64.iso.qcow2 as test boot image
> >   * drop leftover qtest-uefi-images-aarch64 iMakefile rule from
> >     previos version (Laszlo)
> >   * add Makefile rule to include bios-tables-test into
> >     check-qtest-aarch64 target
> > v2:
> >   * specify in test_data where board's RAM starts and RAM size
> > 
> >  tests/Makefile.include                  |  4 ++++
> >  tests/bios-tables-test.c                | 18 ++++++++++++++++++
> >  tests/data/acpi/rebuild-expected-aml.sh |  2 +-
> >  3 files changed, 23 insertions(+), 1 deletion(-)
> > 
> > diff --git a/tests/Makefile.include b/tests/Makefile.include
> > index 1865f6b..2334969 100644
> > --- a/tests/Makefile.include
> > +++ b/tests/Makefile.include
> > @@ -267,6 +267,10 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF)
> >  check-qtest-aarch64-y = tests/numa-test$(EXESUF)
> >  check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
> >  check-qtest-aarch64-y += tests/migration-test$(EXESUF)
> > +# TODO: once aarch64 TCG is fixed on ARM 32 bit host, make test unconditional  
> 
> I think you could also capture the following link here, in a comment:
> 
> # https://bugs.launchpad.net/qemu/+bug/1830872
Michael,
 could you fix it up on commit?
or we could merge v4
   [PATCH v4 13/15] tests: acpi: add simple arm/virt  testcase
which is the same modulo this blacklisting hunk, if
   [RFC PATCH] cputlb: use uint64_t for interim values  for unaligned load
fix is used as prerequisite.

> 
> > +ifneq ($(ARCH),arm)  
> 
> Can we exclude all 32-bit host arches, not just ARM? The discussion in
> LP#1830872 indicates aarch64-on-i386 can fail too (not this specific
> guest payload FWIW, but the "tests/memory" test).
I'd guess it's topic for a separate discussion (considering bios-tables-test
isn't affected it's probably not upto me to pull this trigger).

> 
> Other than that:
> 
> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Thanks!

> 
> Thanks,
> Laszlo
> 
> 
> > +check-qtest-aarch64-y += tests/bios-tables-test$(EXESUF)
> > +endif
> >  
> >  check-qtest-microblazeel-y += $(check-qtest-microblaze-y)
> >  
> > diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
> > index 28d7d42..1242d63 100644
> > --- a/tests/bios-tables-test.c
> > +++ b/tests/bios-tables-test.c
> > @@ -830,6 +830,22 @@ static void test_acpi_piix4_tcg_dimm_pxm(void)
> >      test_acpi_tcg_dimm_pxm(MACHINE_PC);
> >  }
> >  
> > +static void test_acpi_virt_tcg(void)
> > +{
> > +    test_data data = {
> > +        .machine = "virt",
> > +        .accel = "tcg",
> > +        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",
> > +        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",
> > +        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",
> > +        .ram_start = 0x40000000ULL,
> > +        .scan_len = 128ULL * 1024 * 1024,
> > +    };
> > +
> > +    test_acpi_one("-cpu cortex-a57", &data);
> > +    free_test_data(&data);
> > +}
> > +
> >  int main(int argc, char *argv[])
> >  {
> >      const char *arch = qtest_get_arch();
> > @@ -858,6 +874,8 @@ int main(int argc, char *argv[])
> >          qtest_add_func("acpi/q35/numamem", test_acpi_q35_tcg_numamem);
> >          qtest_add_func("acpi/piix4/dimmpxm", test_acpi_piix4_tcg_dimm_pxm);
> >          qtest_add_func("acpi/q35/dimmpxm", test_acpi_q35_tcg_dimm_pxm);
> > +    } else if (strcmp(arch, "aarch64") == 0) {
> > +        qtest_add_func("acpi/virt", test_acpi_virt_tcg);
> >      }
> >      ret = g_test_run();
> >      boot_sector_cleanup(disk);
> > diff --git a/tests/data/acpi/rebuild-expected-aml.sh b/tests/data/acpi/rebuild-expected-aml.sh
> > index ff7e622..d285321 100755
> > --- a/tests/data/acpi/rebuild-expected-aml.sh
> > +++ b/tests/data/acpi/rebuild-expected-aml.sh
> > @@ -12,7 +12,7 @@
> >  # This work is licensed under the terms of the GNU GPLv2.
> >  # See the COPYING.LIB file in the top-level directory.
> >  
> > -qemu_bins="x86_64-softmmu/qemu-system-x86_64"
> > +qemu_bins="x86_64-softmmu/qemu-system-x86_64 aarch64-softmmu/qemu-system-aarch64"
> >  
> >  if [ ! -e "tests/bios-tables-test" ]; then
> >      echo "Test: bios-tables-test is required! Run make check before this script."
> >   
> 

Re: [Qemu-devel] [PATCH v6 2/2] tests: acpi: add simple arm/virt testcase

[Michael S. Tsirkin]

On Tue, Jun 04, 2019 at 01:51:33PM +0200, Igor Mammedov wrote:
> On Mon, 3 Jun 2019 18:08:12 +0200
> Laszlo Ersek <lersek@redhat.com> wrote:
> 
> > On 06/03/19 13:22, Igor Mammedov wrote:
> > > adds simple arm/virt test case that starts guest with
> > > bios-tables-test.aarch64.iso.qcow2 boot image which
> > > initializes UefiTestSupport* structure in RAM once
> > > guest is booted.
> > > 
> > >  * see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper
> > > 
> > > Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> > > ---
> > > v6:
> > >   * Since aarch64 TCG is broken on 32 bit arm host,
> > >     blacklist it till it's fixed
> > >   * add aarch64 to rebuild script list
> > > v4:
> > >   * force test to use TCG accelerator
> > > v3:
> > >   * use firmware blobs directly from pc-bios directory
> > >   * use bios-tables-test.aarch64.iso.qcow2 as test boot image
> > >   * drop leftover qtest-uefi-images-aarch64 iMakefile rule from
> > >     previos version (Laszlo)
> > >   * add Makefile rule to include bios-tables-test into
> > >     check-qtest-aarch64 target
> > > v2:
> > >   * specify in test_data where board's RAM starts and RAM size
> > > 
> > >  tests/Makefile.include                  |  4 ++++
> > >  tests/bios-tables-test.c                | 18 ++++++++++++++++++
> > >  tests/data/acpi/rebuild-expected-aml.sh |  2 +-
> > >  3 files changed, 23 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/tests/Makefile.include b/tests/Makefile.include
> > > index 1865f6b..2334969 100644
> > > --- a/tests/Makefile.include
> > > +++ b/tests/Makefile.include
> > > @@ -267,6 +267,10 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF)
> > >  check-qtest-aarch64-y = tests/numa-test$(EXESUF)
> > >  check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
> > >  check-qtest-aarch64-y += tests/migration-test$(EXESUF)
> > > +# TODO: once aarch64 TCG is fixed on ARM 32 bit host, make test unconditional  
> > 
> > I think you could also capture the following link here, in a comment:
> > 
> > # https://bugs.launchpad.net/qemu/+bug/1830872
> Michael,
>  could you fix it up on commit?

I prefer just seeing a fixed up patch.

> or we could merge v4
>    [PATCH v4 13/15] tests: acpi: add simple arm/virt  testcase
> which is the same modulo this blacklisting hunk, if
>    [RFC PATCH] cputlb: use uint64_t for interim values  for unaligned load
> fix is used as prerequisite.
> 
> > 
> > > +ifneq ($(ARCH),arm)  
> > 
> > Can we exclude all 32-bit host arches, not just ARM? The discussion in
> > LP#1830872 indicates aarch64-on-i386 can fail too (not this specific
> > guest payload FWIW, but the "tests/memory" test).
> I'd guess it's topic for a separate discussion (considering bios-tables-test
> isn't affected it's probably not upto me to pull this trigger).
> 
> > 
> > Other than that:
> > 
> > Reviewed-by: Laszlo Ersek <lersek@redhat.com>
> Thanks!
> 
> > 
> > Thanks,
> > Laszlo
> > 
> > 
> > > +check-qtest-aarch64-y += tests/bios-tables-test$(EXESUF)
> > > +endif
> > >  
> > >  check-qtest-microblazeel-y += $(check-qtest-microblaze-y)
> > >  
> > > diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
> > > index 28d7d42..1242d63 100644
> > > --- a/tests/bios-tables-test.c
> > > +++ b/tests/bios-tables-test.c
> > > @@ -830,6 +830,22 @@ static void test_acpi_piix4_tcg_dimm_pxm(void)
> > >      test_acpi_tcg_dimm_pxm(MACHINE_PC);
> > >  }
> > >  
> > > +static void test_acpi_virt_tcg(void)
> > > +{
> > > +    test_data data = {
> > > +        .machine = "virt",
> > > +        .accel = "tcg",
> > > +        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",
> > > +        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",
> > > +        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",
> > > +        .ram_start = 0x40000000ULL,
> > > +        .scan_len = 128ULL * 1024 * 1024,
> > > +    };
> > > +
> > > +    test_acpi_one("-cpu cortex-a57", &data);
> > > +    free_test_data(&data);
> > > +}
> > > +
> > >  int main(int argc, char *argv[])
> > >  {
> > >      const char *arch = qtest_get_arch();
> > > @@ -858,6 +874,8 @@ int main(int argc, char *argv[])
> > >          qtest_add_func("acpi/q35/numamem", test_acpi_q35_tcg_numamem);
> > >          qtest_add_func("acpi/piix4/dimmpxm", test_acpi_piix4_tcg_dimm_pxm);
> > >          qtest_add_func("acpi/q35/dimmpxm", test_acpi_q35_tcg_dimm_pxm);
> > > +    } else if (strcmp(arch, "aarch64") == 0) {
> > > +        qtest_add_func("acpi/virt", test_acpi_virt_tcg);
> > >      }
> > >      ret = g_test_run();
> > >      boot_sector_cleanup(disk);
> > > diff --git a/tests/data/acpi/rebuild-expected-aml.sh b/tests/data/acpi/rebuild-expected-aml.sh
> > > index ff7e622..d285321 100755
> > > --- a/tests/data/acpi/rebuild-expected-aml.sh
> > > +++ b/tests/data/acpi/rebuild-expected-aml.sh
> > > @@ -12,7 +12,7 @@
> > >  # This work is licensed under the terms of the GNU GPLv2.
> > >  # See the COPYING.LIB file in the top-level directory.
> > >  
> > > -qemu_bins="x86_64-softmmu/qemu-system-x86_64"
> > > +qemu_bins="x86_64-softmmu/qemu-system-x86_64 aarch64-softmmu/qemu-system-aarch64"
> > >  
> > >  if [ ! -e "tests/bios-tables-test" ]; then
> > >      echo "Test: bios-tables-test is required! Run make check before this script."
> > >   
> > 

[Qemu-devel] [PULL v3 16/17] tests: acpi: add simple arm/virt testcase

[Michael S. Tsirkin]

From: Igor Mammedov <imammedo@redhat.com>

adds simple arm/virt test case that starts guest with
bios-tables-test.aarch64.iso.qcow2 boot image which
initializes UefiTestSupport* structure in RAM once
guest is booted.

 * see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559560929-260254-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test.c                | 18 ++++++++++++++++++
 tests/Makefile.include                  |  4 ++++
 tests/data/acpi/rebuild-expected-aml.sh |  2 +-
 3 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 70895e1014..d80ea7f7f3 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -832,6 +832,22 @@ static void test_acpi_piix4_tcg_dimm_pxm(void)
     test_acpi_tcg_dimm_pxm(MACHINE_PC);
 }
 
+static void test_acpi_virt_tcg(void)
+{
+    test_data data = {
+        .machine = "virt",
+        .accel = "tcg",
+        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",
+        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",
+        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",
+        .ram_start = 0x40000000ULL,
+        .scan_len = 128ULL * 1024 * 1024,
+    };
+
+    test_acpi_one("-cpu cortex-a57", &data);
+    free_test_data(&data);
+}
+
 int main(int argc, char *argv[])
 {
     const char *arch = qtest_get_arch();
@@ -860,6 +876,8 @@ int main(int argc, char *argv[])
         qtest_add_func("acpi/q35/numamem", test_acpi_q35_tcg_numamem);
         qtest_add_func("acpi/piix4/dimmpxm", test_acpi_piix4_tcg_dimm_pxm);
         qtest_add_func("acpi/q35/dimmpxm", test_acpi_q35_tcg_dimm_pxm);
+    } else if (strcmp(arch, "aarch64") == 0) {
+        qtest_add_func("acpi/virt", test_acpi_virt_tcg);
     }
     ret = g_test_run();
     boot_sector_cleanup(disk);
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 1865f6b322..2334969f1f 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -267,6 +267,10 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF)
 check-qtest-aarch64-y = tests/numa-test$(EXESUF)
 check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
 check-qtest-aarch64-y += tests/migration-test$(EXESUF)
+# TODO: once aarch64 TCG is fixed on ARM 32 bit host, make test unconditional
+ifneq ($(ARCH),arm)
+check-qtest-aarch64-y += tests/bios-tables-test$(EXESUF)
+endif
 
 check-qtest-microblazeel-y += $(check-qtest-microblaze-y)
 
diff --git a/tests/data/acpi/rebuild-expected-aml.sh b/tests/data/acpi/rebuild-expected-aml.sh
index ff7e62249d..d2853218dd 100755
--- a/tests/data/acpi/rebuild-expected-aml.sh
+++ b/tests/data/acpi/rebuild-expected-aml.sh
@@ -12,7 +12,7 @@
 # This work is licensed under the terms of the GNU GPLv2.
 # See the COPYING.LIB file in the top-level directory.
 
-qemu_bins="x86_64-softmmu/qemu-system-x86_64"
+qemu_bins="x86_64-softmmu/qemu-system-x86_64 aarch64-softmmu/qemu-system-aarch64"
 
 if [ ! -e "tests/bios-tables-test" ]; then
     echo "Test: bios-tables-test is required! Run make check before this script."
-- 
MST

[Qemu-devel] [PULL v3 00/17] virtio, pci, pc: cleanups, features

[Michael S. Tsirkin]

The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:

  Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream

for you to fetch changes up to 7f36f0930ffec11a551844c0452dbce33f80a525:

  bios-tables-test: ignore identical binaries (2019-06-05 15:54:15 -0400)

----------------------------------------------------------------
virtio, pci, pc: cleanups, features

stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.

vhost-scsi migration.

some cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

----------------------------------------------------------------
David Gibson (3):
      pcie: Simplify pci_adjust_config_limit()
      pci: Make is_bridge a bool
      pci: Fold pci_get_bus_devfn() into its sole caller

Igor Mammedov (3):
      docs: smbios: remove family=x from type2 entry description
      tests: add expected ACPI tables for arm/virt board
      tests: acpi: add simple arm/virt testcase

Jie Wang (3):
      vhost: remove the dead code
      vhost: fix incorrect print type
      vhost: fix memory leak in vhost_user_scsi_realize

Liran Alon (1):
      vhost-scsi: Allow user to enable migration

Michael S. Tsirkin (3):
      bios-tables-test: add diff allowed list
      bios-tables-test: list all tables that differ
      bios-tables-test: ignore identical binaries

Nir Weiner (2):
      vhost-scsi: The vhost backend should be stopped when the VM is not running
      vhost-scsi: Add VMState descriptor

Wei Yang (2):
      hw/acpi: Consolidate build_mcfg to pci.c
      acpi: pci: use build_append_foo() API to construct MCFG

 default-configs/i386-softmmu.mak        |   1 +
 include/hw/acpi/acpi-defs.h             |  18 ------
 include/hw/acpi/pci.h                   |   1 +
 include/hw/pci/pci.h                    |   3 +-
 include/hw/pci/pci_bus.h                |   8 ++-
 include/hw/virtio/vhost-scsi-common.h   |   1 +
 tests/bios-tables-test-allowed-diff.h   |   1 +
 hw/acpi/pci.c                           |  61 +++++++++++++++++++
 hw/arm/virt-acpi-build.c                |  17 ------
 hw/i386/acpi-build.c                    |  18 +-----
 hw/pci-bridge/dec.c                     |   4 +-
 hw/pci-bridge/i82801b11.c               |   2 +-
 hw/pci-bridge/pci_bridge_dev.c          |   2 +-
 hw/pci-bridge/pcie_pci_bridge.c         |   2 +-
 hw/pci-bridge/pcie_root_port.c          |   2 +-
 hw/pci-bridge/simba.c                   |   2 +-
 hw/pci-bridge/xio3130_downstream.c      |   2 +-
 hw/pci-bridge/xio3130_upstream.c        |   2 +-
 hw/pci/pci.c                            | 101 ++++++++++++++++----------------
 hw/pci/pci_host.c                       |  13 +---
 hw/ppc/spapr_pci.c                      |  34 ++++-------
 hw/scsi/vhost-scsi.c                    |  57 ++++++++++++++----
 hw/scsi/vhost-user-scsi.c               |   3 +
 hw/virtio/vhost.c                       |   3 +-
 tests/bios-tables-test.c                |  53 ++++++++++++++++-
 hw/acpi/Kconfig                         |   4 ++
 hw/acpi/Makefile.objs                   |   1 +
 hw/arm/Kconfig                          |   1 +
 qemu-options.hx                         |   2 +-
 tests/Makefile.include                  |   4 ++
 tests/data/acpi/rebuild-expected-aml.sh |   2 +-
 tests/data/acpi/virt/APIC               | Bin 0 -> 168 bytes
 tests/data/acpi/virt/DSDT               | Bin 0 -> 18476 bytes
 tests/data/acpi/virt/FACP               | Bin 0 -> 268 bytes
 tests/data/acpi/virt/GTDT               | Bin 0 -> 96 bytes
 tests/data/acpi/virt/MCFG               | Bin 0 -> 60 bytes
 tests/data/acpi/virt/SPCR               | Bin 0 -> 80 bytes
 37 files changed, 261 insertions(+), 164 deletions(-)
 create mode 100644 tests/bios-tables-test-allowed-diff.h
 create mode 100644 hw/acpi/pci.c
 create mode 100644 tests/data/acpi/virt/APIC
 create mode 100644 tests/data/acpi/virt/DSDT
 create mode 100644 tests/data/acpi/virt/FACP
 create mode 100644 tests/data/acpi/virt/GTDT
 create mode 100644 tests/data/acpi/virt/MCFG
 create mode 100644 tests/data/acpi/virt/SPCR

[Qemu-devel] [PULL v3 10/17] bios-tables-test: add diff allowed list

[Michael S. Tsirkin]

Expected table change is then handled like this:
1. add table to diff allowed list
2. change generating code (can be combined with 1)
3. maintainer runs a script to update expected +
   blows away allowed diff list

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test-allowed-diff.h |  1 +
 tests/bios-tables-test.c              | 19 ++++++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)
 create mode 100644 tests/bios-tables-test-allowed-diff.h

diff --git a/tests/bios-tables-test-allowed-diff.h b/tests/bios-tables-test-allowed-diff.h
new file mode 100644
index 0000000000..dfb8523c8b
--- /dev/null
+++ b/tests/bios-tables-test-allowed-diff.h
@@ -0,0 +1 @@
+/* List of comma-separated changed AML files to ignore */
diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 11e07be093..28d7d427e0 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -342,6 +342,22 @@ try_again:
     return exp_tables;
 }
 
+static bool test_acpi_find_diff_allowed(AcpiSdtTable *sdt)
+{
+    const gchar *allowed_diff_file[] = {
+#include "bios-tables-test-allowed-diff.h"
+        NULL
+    };
+    const gchar **f;
+
+    for (f = allowed_diff_file; *f; ++f) {
+        if (!g_strcmp0(sdt->aml_file, *f)) {
+            return true;
+        }
+    }
+    return false;
+}
+
 /* test the list of tables in @data->tables against reference tables */
 static void test_acpi_asl(test_data *data)
 {
@@ -396,7 +412,8 @@ static void test_acpi_asl(test_data *data)
                             "see ASL difference.");
                     }
                 }
-          }
+            }
+            g_assert(test_acpi_find_diff_allowed(exp_sdt));
         }
         g_string_free(asl, true);
         g_string_free(exp_asl, true);
-- 
MST

[Qemu-devel] [PULL v3 14/17] bios-tables-test: list all tables that differ

[Michael S. Tsirkin]

Fail after comparing all tables: this way
user gets the full list of tables that need
to be updated or whitelisted.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 28d7d427e0..70895e1014 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -364,7 +364,7 @@ static void test_acpi_asl(test_data *data)
     int i;
     AcpiSdtTable *sdt, *exp_sdt;
     test_data exp_data;
-    gboolean exp_err, err;
+    gboolean exp_err, err, all_tables_match = true;
 
     memset(&exp_data, 0, sizeof(exp_data));
     exp_data.tables = load_expected_aml(data);
@@ -413,11 +413,13 @@ static void test_acpi_asl(test_data *data)
                     }
                 }
             }
-            g_assert(test_acpi_find_diff_allowed(exp_sdt));
+            all_tables_match = all_tables_match &&
+                test_acpi_find_diff_allowed(exp_sdt);
         }
         g_string_free(asl, true);
         g_string_free(exp_asl, true);
     }
+    g_assert(all_tables_match);
 
     free_test_data(&exp_data);
 }
-- 
MST

[Qemu-devel] [PULL v3 17/17] bios-tables-test: ignore identical binaries

[Michael S. Tsirkin]

when binary of the tables is identical, there is no need to run iasl
to check that they are functionally equivalent.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index d80ea7f7f3..0ce55182f2 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -375,6 +375,20 @@ static void test_acpi_asl(test_data *data)
         sdt = &g_array_index(data->tables, AcpiSdtTable, i);
         exp_sdt = &g_array_index(exp_data.tables, AcpiSdtTable, i);
 
+        if (sdt->aml_len == exp_sdt->aml_len &&
+            !memcmp(sdt->aml, exp_sdt->aml, sdt->aml_len)) {
+            /* Identical table binaries: no need to disassemble. */
+            continue;
+        }
+
+        fprintf(stderr,
+                "acpi-test: Warning! %.4s binary file mismatch. "
+                "Actual [aml:%s], Expected [aml:%s].\n",
+                exp_sdt->aml, sdt->aml_file, exp_sdt->aml_file);
+
+        all_tables_match = all_tables_match &&
+            test_acpi_find_diff_allowed(exp_sdt);
+
         err = load_asl(data->tables, sdt);
         asl = normalize_asl(sdt->asl);
 
@@ -413,8 +427,6 @@ static void test_acpi_asl(test_data *data)
                     }
                 }
             }
-            all_tables_match = all_tables_match &&
-                test_acpi_find_diff_allowed(exp_sdt);
         }
         g_string_free(asl, true);
         g_string_free(exp_asl, true);
-- 
MST

Re: [Qemu-devel] [PULL v3 00/17] virtio, pci, pc: cleanups, features

[Peter Maydell]

On Wed, 5 Jun 2019 at 21:00, Michael S. Tsirkin <mst@redhat.com> wrote:
>
> The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:
>
>   Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream
>
> for you to fetch changes up to 7f36f0930ffec11a551844c0452dbce33f80a525:
>
>   bios-tables-test: ignore identical binaries (2019-06-05 15:54:15 -0400)
>
> ----------------------------------------------------------------
> virtio, pci, pc: cleanups, features
>
> stricter rules for acpi tables: we now fail
> on any difference that isn't whitelisted.
>
> vhost-scsi migration.
>
> some cleanups all over the place
>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>


Applied, thanks.

Please update the changelog at https://wiki.qemu.org/ChangeLog/4.1
for any user-visible changes.

-- PMM

[Qemu-devel] [PULL v2 00/14] virtio, pci, pc: cleanups, features

[Michael S. Tsirkin]

The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:

  Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream

for you to fetch changes up to df7cafdeb68b6572fa81d2be9a1910547c4dfafc:

  bios-tables-test: list all tables that differ (2019-06-03 08:05:43 -0400)

----------------------------------------------------------------
virtio, pci, pc: cleanups, features

stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.

vhost-scsi migration.

some cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

----------------------------------------------------------------
David Gibson (3):
      pcie: Simplify pci_adjust_config_limit()
      pci: Make is_bridge a bool
      pci: Fold pci_get_bus_devfn() into its sole caller

Igor Mammedov (1):
      docs: smbios: remove family=x from type2 entry description

Jie Wang (3):
      vhost: remove the dead code
      vhost: fix incorrect print type
      vhost: fix memory leak in vhost_user_scsi_realize

Liran Alon (1):
      vhost-scsi: Allow user to enable migration

Michael S. Tsirkin (2):
      bios-tables-test: add diff allowed list
      bios-tables-test: list all tables that differ

Nir Weiner (2):
      vhost-scsi: The vhost backend should be stopped when the VM is not running
      vhost-scsi: Add VMState descriptor

Wei Yang (2):
      hw/acpi: Consolidate build_mcfg to pci.c
      acpi: pci: use build_append_foo() API to construct MCFG

 default-configs/i386-softmmu.mak      |   1 +
 include/hw/acpi/acpi-defs.h           |  18 ------
 include/hw/acpi/pci.h                 |   1 +
 include/hw/pci/pci.h                  |   3 +-
 include/hw/pci/pci_bus.h              |   8 ++-
 include/hw/virtio/vhost-scsi-common.h |   1 +
 tests/bios-tables-test-allowed-diff.h |   1 +
 hw/acpi/pci.c                         |  61 ++++++++++++++++++++
 hw/arm/virt-acpi-build.c              |  17 ------
 hw/i386/acpi-build.c                  |  18 +-----
 hw/pci-bridge/dec.c                   |   4 +-
 hw/pci-bridge/i82801b11.c             |   2 +-
 hw/pci-bridge/pci_bridge_dev.c        |   2 +-
 hw/pci-bridge/pcie_pci_bridge.c       |   2 +-
 hw/pci-bridge/pcie_root_port.c        |   2 +-
 hw/pci-bridge/simba.c                 |   2 +-
 hw/pci-bridge/xio3130_downstream.c    |   2 +-
 hw/pci-bridge/xio3130_upstream.c      |   2 +-
 hw/pci/pci.c                          | 101 +++++++++++++++++-----------------
 hw/pci/pci_host.c                     |  13 +----
 hw/ppc/spapr_pci.c                    |  34 ++++--------
 hw/scsi/vhost-scsi.c                  |  57 +++++++++++++++----
 hw/scsi/vhost-user-scsi.c             |   3 +
 hw/virtio/vhost.c                     |   3 +-
 tests/bios-tables-test.c              |  23 +++++++-
 hw/acpi/Kconfig                       |   4 ++
 hw/acpi/Makefile.objs                 |   1 +
 hw/arm/Kconfig                        |   1 +
 qemu-options.hx                       |   2 +-
 29 files changed, 226 insertions(+), 163 deletions(-)
 create mode 100644 tests/bios-tables-test-allowed-diff.h
 create mode 100644 hw/acpi/pci.c

[Qemu-devel] [PULL v2 10/14] bios-tables-test: add diff allowed list

[Michael S. Tsirkin]

Expected table change is then handled like this:
1. add table to diff allowed list
2. change generating code (can be combined with 1)
3. maintainer runs a script to update expected +
   blows away allowed diff list

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test-allowed-diff.h |  1 +
 tests/bios-tables-test.c              | 19 ++++++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)
 create mode 100644 tests/bios-tables-test-allowed-diff.h

diff --git a/tests/bios-tables-test-allowed-diff.h b/tests/bios-tables-test-allowed-diff.h
new file mode 100644
index 0000000000..dfb8523c8b
--- /dev/null
+++ b/tests/bios-tables-test-allowed-diff.h
@@ -0,0 +1 @@
+/* List of comma-separated changed AML files to ignore */
diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 11e07be093..28d7d427e0 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -342,6 +342,22 @@ try_again:
     return exp_tables;
 }
 
+static bool test_acpi_find_diff_allowed(AcpiSdtTable *sdt)
+{
+    const gchar *allowed_diff_file[] = {
+#include "bios-tables-test-allowed-diff.h"
+        NULL
+    };
+    const gchar **f;
+
+    for (f = allowed_diff_file; *f; ++f) {
+        if (!g_strcmp0(sdt->aml_file, *f)) {
+            return true;
+        }
+    }
+    return false;
+}
+
 /* test the list of tables in @data->tables against reference tables */
 static void test_acpi_asl(test_data *data)
 {
@@ -396,7 +412,8 @@ static void test_acpi_asl(test_data *data)
                             "see ASL difference.");
                     }
                 }
-          }
+            }
+            g_assert(test_acpi_find_diff_allowed(exp_sdt));
         }
         g_string_free(asl, true);
         g_string_free(exp_asl, true);
-- 
MST

[Qemu-devel] [PULL v2 14/14] bios-tables-test: list all tables that differ

[Michael S. Tsirkin]

Fail after comparing all tables: this way
user gets the full list of tables that need
to be updated or whitelisted.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 28d7d427e0..70895e1014 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -364,7 +364,7 @@ static void test_acpi_asl(test_data *data)
     int i;
     AcpiSdtTable *sdt, *exp_sdt;
     test_data exp_data;
-    gboolean exp_err, err;
+    gboolean exp_err, err, all_tables_match = true;
 
     memset(&exp_data, 0, sizeof(exp_data));
     exp_data.tables = load_expected_aml(data);
@@ -413,11 +413,13 @@ static void test_acpi_asl(test_data *data)
                     }
                 }
             }
-            g_assert(test_acpi_find_diff_allowed(exp_sdt));
+            all_tables_match = all_tables_match &&
+                test_acpi_find_diff_allowed(exp_sdt);
         }
         g_string_free(asl, true);
         g_string_free(exp_asl, true);
     }
+    g_assert(all_tables_match);
 
     free_test_data(&exp_data);
 }
-- 
MST

Re: [Qemu-devel] [PULL v2 00/14] virtio, pci, pc: cleanups, features

[Peter Maydell]

On Mon, 3 Jun 2019 at 19:08, Michael S. Tsirkin <mst@redhat.com> wrote:
>
> The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:
>
>   Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream
>
> for you to fetch changes up to df7cafdeb68b6572fa81d2be9a1910547c4dfafc:
>
>   bios-tables-test: list all tables that differ (2019-06-03 08:05:43 -0400)
>
> ----------------------------------------------------------------
> virtio, pci, pc: cleanups, features
>
> stricter rules for acpi tables: we now fail
> on any difference that isn't whitelisted.
>
> vhost-scsi migration.
>
> some cleanups all over the place
>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>
> ----------------------------------------------------------------


Hi; I'm afraid this fails 'make check' on my aarch32 build:

MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
QTEST_QEMU_BINARY=i386-softmmu/qemu-system-i386
QTEST_QEMU_IMG=qemu-img tests/bios-tables-test -m=quick -k --tap <
/dev/null | ./scripts/tap-driver.pl --test-name="bios-tables-test"

Looking for expected file 'tests/data/acpi/pc/FACP'
Using expected file 'tests/data/acpi/pc/FACP'
Looking for expected file 'tests/data/acpi/pc/APIC'
Using expected file 'tests/data/acpi/pc/APIC'
Looking for expected file 'tests/data/acpi/pc/HPET'
Using expected file 'tests/data/acpi/pc/HPET'
Looking for expected file 'tests/data/acpi/pc/FACS'
Using expected file 'tests/data/acpi/pc/FACS'
Looking for expected file 'tests/data/acpi/pc/DSDT'
Using expected file 'tests/data/acpi/pc/DSDT'
PASS 1 bios-tables-test /i386/acpi/piix4

Looking for expected file 'tests/data/acpi/q35/FACP'
Using expected file 'tests/data/acpi/q35/FACP'
Looking for expected file 'tests/data/acpi/q35/APIC'
Using expected file 'tests/data/acpi/q35/APIC'
Looking for expected file 'tests/data/acpi/q35/HPET'
Using expected file 'tests/data/acpi/q35/HPET'
Looking for expected file 'tests/data/acpi/q35/MCFG'
Using expected file 'tests/data/acpi/q35/MCFG'
Looking for expected file 'tests/data/acpi/q35/FACS'
Using expected file 'tests/data/acpi/q35/FACS'
Looking for expected file 'tests/data/acpi/q35/DSDT'
Using expected file 'tests/data/acpi/q35/DSDT'
acpi-test: Warning! DSDT mismatch. Actual [asl:/tmp/asl-NKUU2Z.dsl,
aml:/tmp/aml-UERV2Z], Expected [asl:/tmp/asl-3ITW2Z.dsl,
aml:tests/data/acpi/q35/DSDT].
acpi-test: Warning. not showing difference since no diff utility is
specified. Set 'DIFF' environment variable to a preferred diff utility
and run 'make V=1 check' again to see ASL difference.**
ERROR:/home/peter.maydell/qemu/tests/bios-tables-test.c:422:test_acpi_asl:
assertion failed: (all_tables_match)
Aborted
ERROR - too few tests run (expected 15, got 1)
/home/peter.maydell/qemu/tests/Makefile.include:884: recipe for target
'check-qtest-i386' failed


This is the only 32-bit host I test on, so it may be a generic
32-bit host problem rather than arm-specific.

thanks
-- PMM

Re: [Qemu-devel] [PULL v2 00/14] virtio, pci, pc: cleanups, features

[Michael S. Tsirkin]

On Tue, Jun 04, 2019 at 04:57:00PM +0100, Peter Maydell wrote:
> On Mon, 3 Jun 2019 at 19:08, Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:
> >
> >   Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)
> >
> > are available in the Git repository at:
> >
> >   git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream
> >
> > for you to fetch changes up to df7cafdeb68b6572fa81d2be9a1910547c4dfafc:
> >
> >   bios-tables-test: list all tables that differ (2019-06-03 08:05:43 -0400)
> >
> > ----------------------------------------------------------------
> > virtio, pci, pc: cleanups, features
> >
> > stricter rules for acpi tables: we now fail
> > on any difference that isn't whitelisted.
> >
> > vhost-scsi migration.
> >
> > some cleanups all over the place
> >
> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> >
> > ----------------------------------------------------------------
> 
> 
> Hi; I'm afraid this fails 'make check' on my aarch32 build:
> 
> MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
> QTEST_QEMU_BINARY=i386-softmmu/qemu-system-i386
> QTEST_QEMU_IMG=qemu-img tests/bios-tables-test -m=quick -k --tap <
> /dev/null | ./scripts/tap-driver.pl --test-name="bios-tables-test"
> 
> Looking for expected file 'tests/data/acpi/pc/FACP'
> Using expected file 'tests/data/acpi/pc/FACP'
> Looking for expected file 'tests/data/acpi/pc/APIC'
> Using expected file 'tests/data/acpi/pc/APIC'
> Looking for expected file 'tests/data/acpi/pc/HPET'
> Using expected file 'tests/data/acpi/pc/HPET'
> Looking for expected file 'tests/data/acpi/pc/FACS'
> Using expected file 'tests/data/acpi/pc/FACS'
> Looking for expected file 'tests/data/acpi/pc/DSDT'
> Using expected file 'tests/data/acpi/pc/DSDT'
> PASS 1 bios-tables-test /i386/acpi/piix4
> 
> Looking for expected file 'tests/data/acpi/q35/FACP'
> Using expected file 'tests/data/acpi/q35/FACP'
> Looking for expected file 'tests/data/acpi/q35/APIC'
> Using expected file 'tests/data/acpi/q35/APIC'
> Looking for expected file 'tests/data/acpi/q35/HPET'
> Using expected file 'tests/data/acpi/q35/HPET'
> Looking for expected file 'tests/data/acpi/q35/MCFG'
> Using expected file 'tests/data/acpi/q35/MCFG'
> Looking for expected file 'tests/data/acpi/q35/FACS'
> Using expected file 'tests/data/acpi/q35/FACS'
> Looking for expected file 'tests/data/acpi/q35/DSDT'
> Using expected file 'tests/data/acpi/q35/DSDT'
> acpi-test: Warning! DSDT mismatch. Actual [asl:/tmp/asl-NKUU2Z.dsl,
> aml:/tmp/aml-UERV2Z], Expected [asl:/tmp/asl-3ITW2Z.dsl,
> aml:tests/data/acpi/q35/DSDT].
> acpi-test: Warning. not showing difference since no diff utility is
> specified. Set 'DIFF' environment variable to a preferred diff utility
> and run 'make V=1 check' again to see ASL difference.**
> ERROR:/home/peter.maydell/qemu/tests/bios-tables-test.c:422:test_acpi_asl:
> assertion failed: (all_tables_match)
> Aborted
> ERROR - too few tests run (expected 15, got 1)
> /home/peter.maydell/qemu/tests/Makefile.include:884: recipe for target
> 'check-qtest-i386' failed
> 
> 
> This is the only 32-bit host I test on, so it may be a generic
> 32-bit host problem rather than arm-specific.
> 
> thanks
> -- PMM

I see. I can drop this patch for now, but I suspect this
means this host always produced warning and possibly
that the tables are all wrong.
Could you send me the actual and expected files please?
Preferably both dsl and binary.

-- 
MST

Re: [Qemu-devel] [PULL v2 00/14] virtio, pci, pc: cleanups, features

[Peter Maydell]

On Tue, 4 Jun 2019 at 17:48, Michael S. Tsirkin <mst@redhat.com> wrote:
> I see. I can drop this patch for now, but I suspect this
> means this host always produced warning and possibly
> that the tables are all wrong.
> Could you send me the actual and expected files please?
> Preferably both dsl and binary.

Sure, if you can give me commands to run to do that.

thanks
-- PMM

Re: [Qemu-devel] [PULL v2 00/14] virtio, pci, pc: cleanups, features

[Michael S. Tsirkin]

On Tue, Jun 04, 2019 at 05:55:36PM +0100, Peter Maydell wrote:
> On Tue, 4 Jun 2019 at 17:48, Michael S. Tsirkin <mst@redhat.com> wrote:
> > I see. I can drop this patch for now, but I suspect this
> > means this host always produced warning and possibly
> > that the tables are all wrong.
> > Could you send me the actual and expected files please?
> > Preferably both dsl and binary.
> 
> Sure, if you can give me commands to run to do that.
> 
> thanks
> -- PMM

They are produced as part of the test.

So we have:
acpi-test: Warning! DSDT mismatch. Actual [asl:/tmp/asl-NKUU2Z.dsl,
aml:/tmp/aml-UERV2Z], Expected [asl:/tmp/asl-3ITW2Z.dsl,
aml:tests/data/acpi/q35/DSDT].

You would do something like:

tar cvzf tests.tgz /tmp/asl-NKUU2Z.dsl /tmp/aml-UERV2Z /tmp/asl-3ITW2Z.dsl tests/data/acpi/q35/DSDT

And then send the tarball.

-- 
MST

[Qemu-devel] [PULL 00/10] virtio, pci, pc: cleanups

[Michael S. Tsirkin]

The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:

  Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream

for you to fetch changes up to 8828a019eec52858140c7368494fb1523971cd5f:

  vhost: fix memory leak in vhost_user_scsi_realize (2019-05-29 12:34:45 -0400)

----------------------------------------------------------------
virtio, pci, pc: cleanups

not a lot going on, just some cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

----------------------------------------------------------------
David Gibson (3):
      pcie: Simplify pci_adjust_config_limit()
      pci: Make is_bridge a bool
      pci: Fold pci_get_bus_devfn() into its sole caller

Igor Mammedov (1):
      docs: smbios: remove family=x from type2 entry description

Jie Wang (3):
      vhost: remove the dead code
      vhost: fix incorrect print type
      vhost: fix memory leak in vhost_user_scsi_realize

Michael S. Tsirkin (1):
      bios-tables-test: add diff allowed list

Wei Yang (2):
      hw/acpi: Consolidate build_mcfg to pci.c
      acpi: pci: use build_append_foo() API to construct MCFG

 default-configs/i386-softmmu.mak      |   1 +
 include/hw/acpi/acpi-defs.h           |  18 ------
 include/hw/acpi/pci.h                 |   1 +
 include/hw/pci/pci.h                  |   3 +-
 include/hw/pci/pci_bus.h              |   8 ++-
 tests/bios-tables-test-allowed-diff.h |   1 +
 hw/acpi/pci.c                         |  61 ++++++++++++++++++++
 hw/arm/virt-acpi-build.c              |  17 ------
 hw/i386/acpi-build.c                  |  18 +-----
 hw/pci-bridge/dec.c                   |   4 +-
 hw/pci-bridge/i82801b11.c             |   2 +-
 hw/pci-bridge/pci_bridge_dev.c        |   2 +-
 hw/pci-bridge/pcie_pci_bridge.c       |   2 +-
 hw/pci-bridge/pcie_root_port.c        |   2 +-
 hw/pci-bridge/simba.c                 |   2 +-
 hw/pci-bridge/xio3130_downstream.c    |   2 +-
 hw/pci-bridge/xio3130_upstream.c      |   2 +-
 hw/pci/pci.c                          | 101 +++++++++++++++++-----------------
 hw/pci/pci_host.c                     |  13 +----
 hw/ppc/spapr_pci.c                    |  34 ++++--------
 hw/scsi/vhost-user-scsi.c             |   3 +
 hw/virtio/vhost.c                     |   3 +-
 tests/bios-tables-test.c              |  20 ++++++-
 hw/acpi/Kconfig                       |   4 ++
 hw/acpi/Makefile.objs                 |   1 +
 hw/arm/Kconfig                        |   1 +
 qemu-options.hx                       |   2 +-
 27 files changed, 176 insertions(+), 152 deletions(-)
 create mode 100644 tests/bios-tables-test-allowed-diff.h
 create mode 100644 hw/acpi/pci.c

[Qemu-devel] [PATCH] vhost: remove the dead code

[Jie Wang]

remove the dead code

Signed-off-by: Jie Wang <wangjie88@huawei.com>
---
 hw/virtio/vhost.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..2303a8c206 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1650,7 +1650,6 @@ fail_vq:
                              hdev->vqs + i,
                              hdev->vq_index + i);
     }
-    i = hdev->nvqs;
 
 fail_mem:
 fail_features:
-- 
2.16.2.windows.1

[Qemu-devel] [PATCH] vhost: remove the dead code

[Jie Wang]

remove the dead code

Signed-off-by: Jie Wang <wangjie88@huawei.com>
---
 hw/virtio/vhost.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..2303a8c206 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1650,7 +1650,6 @@ fail_vq:
                              hdev->vqs + i,
                              hdev->vq_index + i);
     }
-    i = hdev->nvqs;
 
 fail_mem:
 fail_features:
-- 
2.16.2.windows.1

Re: [Qemu-devel] [PATCH] vhost: remove the dead code

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 260 bytes --]

On Tue, Apr 30, 2019 at 02:10:14PM +0800, Jie Wang wrote:
> remove the dead code
> 
> Signed-off-by: Jie Wang <wangjie88@huawei.com>
> ---
>  hw/virtio/vhost.c | 1 -
>  1 file changed, 1 deletion(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Qemu-devel] [PATCH] vhost: remove the dead code

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 260 bytes --]

On Tue, Apr 30, 2019 at 02:10:14PM +0800, Jie Wang wrote:
> remove the dead code
> 
> Signed-off-by: Jie Wang <wangjie88@huawei.com>
> ---
>  hw/virtio/vhost.c | 1 -
>  1 file changed, 1 deletion(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] Ping Re: [PATCH] vhost: remove the dead code

[Jie Wang]

On 2019/5/2 0:38, Stefan Hajnoczi wrote:
> On Tue, Apr 30, 2019 at 02:10:14PM +0800, Jie Wang wrote:
>> remove the dead code
>>
>> Signed-off-by: Jie Wang <wangjie88@huawei.com>
>> ---
>>  hw/virtio/vhost.c | 1 -
>>  1 file changed, 1 deletion(-)
> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[Qemu-devel] [PULL 08/10] vhost: remove the dead code

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

remove the dead code

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556604614-32081-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/virtio/vhost.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..2303a8c206 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1650,7 +1650,6 @@ fail_vq:
                              hdev->vqs + i,
                              hdev->vq_index + i);
     }
-    i = hdev->nvqs;
 
 fail_mem:
 fail_features:
-- 
MST

[Qemu-devel] [PULL v2 07/14] vhost: remove the dead code

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

remove the dead code

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556604614-32081-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/virtio/vhost.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..2303a8c206 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1650,7 +1650,6 @@ fail_vq:
                              hdev->vqs + i,
                              hdev->vq_index + i);
     }
-    i = hdev->nvqs;
 
 fail_mem:
 fail_features:
-- 
MST

[Qemu-devel] [PULL v3 07/17] vhost: remove the dead code

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

remove the dead code

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556604614-32081-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/virtio/vhost.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..2303a8c206 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1650,7 +1650,6 @@ fail_vq:
                              hdev->vqs + i,
                              hdev->vq_index + i);
     }
-    i = hdev->nvqs;
 
 fail_mem:
 fail_features:
-- 
MST

[Qemu-devel] [PATCH] vhost: fix incorrect print type

[Jie Wang]

fix incorrect print type in vhost_virtqueue_stop

Signed-off-by: Jie Wang <wangjie88@huawei.com>
---
 hw/virtio/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..286bb27c65 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
 
     r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
     if (r < 0) {
-        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
+        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
         /* Connection to the backend is broken, so let's sync internal
          * last avail idx to the device used idx.
          */
-- 
2.16.2.windows.1

[Qemu-devel] [PATCH] vhost: fix incorrect print type

[Jie Wang]

fix incorrect print type in vhost_virtqueue_stop

Signed-off-by: Jie Wang <wangjie88@huawei.com>
---
 hw/virtio/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 7f61018f2a..286bb27c65 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
 
     r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
     if (r < 0) {
-        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
+        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
         /* Connection to the backend is broken, so let's sync internal
          * last avail idx to the device used idx.
          */
-- 
2.16.2.windows.1

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[Philippe Mathieu-Daudé]

On 4/30/19 8:29 AM, Jie Wang wrote:
> fix incorrect print type in vhost_virtqueue_stop
> 
> Signed-off-by: Jie Wang <wangjie88@huawei.com>
> ---
>  hw/virtio/vhost.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> index 7f61018f2a..286bb27c65 100644
> --- a/hw/virtio/vhost.c
> +++ b/hw/virtio/vhost.c
> @@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
>  
>      r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
>      if (r < 0) {
> -        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
> +        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);

'idx' is indeed unsigned.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

>          /* Connection to the backend is broken, so let's sync internal
>           * last avail idx to the device used idx.
>           */
> 

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[Philippe Mathieu-Daudé]

On 4/30/19 8:29 AM, Jie Wang wrote:
> fix incorrect print type in vhost_virtqueue_stop
> 
> Signed-off-by: Jie Wang <wangjie88@huawei.com>
> ---
>  hw/virtio/vhost.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> index 7f61018f2a..286bb27c65 100644
> --- a/hw/virtio/vhost.c
> +++ b/hw/virtio/vhost.c
> @@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
>  
>      r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
>      if (r < 0) {
> -        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
> +        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);

'idx' is indeed unsigned.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

>          /* Connection to the backend is broken, so let's sync internal
>           * last avail idx to the device used idx.
>           */
> 

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[Philippe Mathieu-Daudé]

Cc'ing qemu-trivial

On 4/30/19 10:48 AM, Philippe Mathieu-Daudé wrote:
> On 4/30/19 8:29 AM, Jie Wang wrote:
>> fix incorrect print type in vhost_virtqueue_stop
>>
>> Signed-off-by: Jie Wang <wangjie88@huawei.com>
>> ---
>>  hw/virtio/vhost.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
>> index 7f61018f2a..286bb27c65 100644
>> --- a/hw/virtio/vhost.c
>> +++ b/hw/virtio/vhost.c
>> @@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
>>  
>>      r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
>>      if (r < 0) {
>> -        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
>> +        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
> 
> 'idx' is indeed unsigned.
> 
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> 
>>          /* Connection to the backend is broken, so let's sync internal
>>           * last avail idx to the device used idx.
>>           */
>>

Re: [Qemu-devel] [Qemu-trivial] [PATCH] vhost: fix incorrect print type

[Laurent Vivier]

Le 29/05/2019 à 15:13, Philippe Mathieu-Daudé a écrit :
> Cc'ing qemu-trivial
> 
> On 4/30/19 10:48 AM, Philippe Mathieu-Daudé wrote:
>> On 4/30/19 8:29 AM, Jie Wang wrote:
>>> fix incorrect print type in vhost_virtqueue_stop
>>>
>>> Signed-off-by: Jie Wang <wangjie88@huawei.com>
>>> ---
>>>  hw/virtio/vhost.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
>>> index 7f61018f2a..286bb27c65 100644
>>> --- a/hw/virtio/vhost.c
>>> +++ b/hw/virtio/vhost.c
>>> @@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
>>>  
>>>      r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
>>>      if (r < 0) {
>>> -        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
>>> +        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
>>
>> 'idx' is indeed unsigned.
>>
>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>
>>>          /* Connection to the backend is broken, so let's sync internal
>>>           * last avail idx to the device used idx.
>>>           */
>>>
> 

Applied to my trivial-patches branch.

Thanks,
Laurent

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[no-reply]

Patchew URL: https://patchew.org/QEMU/1556605773-42019-1-git-send-email-wangjie88@huawei.com/



Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 NETWORK=1
=== TEST SCRIPT END ===

  COPY    RUNNER
    RUN test-mingw in qemu:fedora 
container_linux.go:247: starting container process caused "process_linux.go:258: applying cgroup configuration for process caused \"The maximum number of active connections for UID 0 has been reached\""
/usr/bin/docker-current: Error response from daemon: oci runtime error: The maximum number of active connections for UID 0 has been reached.
Traceback (most recent call last):
  File "./tests/docker/docker.py", line 615, in <module>
    sys.exit(main())


The full log is available at
http://patchew.org/logs/1556605773-42019-1-git-send-email-wangjie88@huawei.com/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[no-reply]

Patchew URL: https://patchew.org/QEMU/1556605773-42019-1-git-send-email-wangjie88@huawei.com/



Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 NETWORK=1
=== TEST SCRIPT END ===

  COPY    RUNNER
    RUN test-mingw in qemu:fedora 
container_linux.go:247: starting container process caused "process_linux.go:258: applying cgroup configuration for process caused \"The maximum number of active connections for UID 0 has been reached\""
/usr/bin/docker-current: Error response from daemon: oci runtime error: The maximum number of active connections for UID 0 has been reached.
Traceback (most recent call last):
  File "./tests/docker/docker.py", line 615, in <module>
    sys.exit(main())


The full log is available at
http://patchew.org/logs/1556605773-42019-1-git-send-email-wangjie88@huawei.com/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[no-reply]

Patchew URL: https://patchew.org/QEMU/1556605773-42019-1-git-send-email-wangjie88@huawei.com/



Hi,

This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===




The full log is available at
http://patchew.org/logs/1556605773-42019-1-git-send-email-wangjie88@huawei.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH] vhost: fix incorrect print type

[no-reply]

Patchew URL: https://patchew.org/QEMU/1556605773-42019-1-git-send-email-wangjie88@huawei.com/



Hi,

This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===




The full log is available at
http://patchew.org/logs/1556605773-42019-1-git-send-email-wangjie88@huawei.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

[Qemu-devel] [PULL 09/10] vhost: fix incorrect print type

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

fix incorrect print type in vhost_virtqueue_stop

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/virtio/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 2303a8c206..60747a6f93 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
 
     r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
     if (r < 0) {
-        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
+        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
         /* Connection to the backend is broken, so let's sync internal
          * last avail idx to the device used idx.
          */
-- 
MST

[Qemu-devel] [PULL v2 08/14] vhost: fix incorrect print type

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

fix incorrect print type in vhost_virtqueue_stop

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/virtio/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 2303a8c206..60747a6f93 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
 
     r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
     if (r < 0) {
-        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
+        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
         /* Connection to the backend is broken, so let's sync internal
          * last avail idx to the device used idx.
          */
-- 
MST

[Qemu-devel] [PULL v3 08/17] vhost: fix incorrect print type

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

fix incorrect print type in vhost_virtqueue_stop

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/virtio/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 2303a8c206..60747a6f93 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1081,7 +1081,7 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
 
     r = dev->vhost_ops->vhost_get_vring_base(dev, &state);
     if (r < 0) {
-        VHOST_OPS_DEBUG("vhost VQ %d ring restore failed: %d", idx, r);
+        VHOST_OPS_DEBUG("vhost VQ %u ring restore failed: %d", idx, r);
         /* Connection to the backend is broken, so let's sync internal
          * last avail idx to the device used idx.
          */
-- 
MST

[Qemu-devel] [PATCH] vhost: fix memory leak in vhost_user_scsi_realize

[Jie Wang]

fix memory leak in vhost_user_scsi_realize

Signed-off-by: Jie Wang <wangjie88@huawei.com>
---
 hw/scsi/vhost-user-scsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c
index 8b1e6876db..a9fd8ea305 100644
--- a/hw/scsi/vhost-user-scsi.c
+++ b/hw/scsi/vhost-user-scsi.c
@@ -69,6 +69,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
     VHostUserSCSI *s = VHOST_USER_SCSI(dev);
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    struct vhost_virtqueue *vqs = NULL;
     Error *err = NULL;
     int ret;
 
@@ -93,6 +94,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
     vsc->dev.vq_index = 0;
     vsc->dev.backend_features = 0;
+    vqs = vsc->dev.vqs;
 
     ret = vhost_dev_init(&vsc->dev, &s->vhost_user,
                          VHOST_BACKEND_TYPE_USER, 0);
@@ -100,6 +102,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
         error_setg(errp, "vhost-user-scsi: vhost initialization failed: %s",
                    strerror(-ret));
         vhost_user_cleanup(&s->vhost_user);
+        g_free(vqs);
         return;
     }
 
-- 
2.16.2.windows.1

[Qemu-devel] [PATCH] vhost: fix memory leak in vhost_user_scsi_realize

[Jie Wang]

fix memory leak in vhost_user_scsi_realize

Signed-off-by: Jie Wang <wangjie88@huawei.com>
---
 hw/scsi/vhost-user-scsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c
index 8b1e6876db..a9fd8ea305 100644
--- a/hw/scsi/vhost-user-scsi.c
+++ b/hw/scsi/vhost-user-scsi.c
@@ -69,6 +69,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
     VHostUserSCSI *s = VHOST_USER_SCSI(dev);
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    struct vhost_virtqueue *vqs = NULL;
     Error *err = NULL;
     int ret;
 
@@ -93,6 +94,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
     vsc->dev.vq_index = 0;
     vsc->dev.backend_features = 0;
+    vqs = vsc->dev.vqs;
 
     ret = vhost_dev_init(&vsc->dev, &s->vhost_user,
                          VHOST_BACKEND_TYPE_USER, 0);
@@ -100,6 +102,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
         error_setg(errp, "vhost-user-scsi: vhost initialization failed: %s",
                    strerror(-ret));
         vhost_user_cleanup(&s->vhost_user);
+        g_free(vqs);
         return;
     }
 
-- 
2.16.2.windows.1

Re: [Qemu-devel] [PATCH] vhost: fix memory leak in vhost_user_scsi_realize

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 294 bytes --]

On Tue, Apr 30, 2019 at 03:15:00PM +0800, Jie Wang wrote:
> fix memory leak in vhost_user_scsi_realize
> 
> Signed-off-by: Jie Wang <wangjie88@huawei.com>
> ---
>  hw/scsi/vhost-user-scsi.c | 3 +++
>  1 file changed, 3 insertions(+)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Qemu-devel] [PATCH] vhost: fix memory leak in vhost_user_scsi_realize

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 294 bytes --]

On Tue, Apr 30, 2019 at 03:15:00PM +0800, Jie Wang wrote:
> fix memory leak in vhost_user_scsi_realize
> 
> Signed-off-by: Jie Wang <wangjie88@huawei.com>
> ---
>  hw/scsi/vhost-user-scsi.c | 3 +++
>  1 file changed, 3 insertions(+)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] Ping Re: [PATCH] vhost: fix memory leak in vhost_user_scsi_realize

[Jie Wang]

On 2019/5/2 0:40, Stefan Hajnoczi wrote:
> On Tue, Apr 30, 2019 at 03:15:00PM +0800, Jie Wang wrote:
>> fix memory leak in vhost_user_scsi_realize
>>
>> Signed-off-by: Jie Wang <wangjie88@huawei.com>
>> ---
>>  hw/scsi/vhost-user-scsi.c | 3 +++
>>  1 file changed, 3 insertions(+)
> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[Qemu-devel] [PULL 10/10] vhost: fix memory leak in vhost_user_scsi_realize

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

fix memory leak in vhost_user_scsi_realize

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556608500-12183-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-user-scsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c
index 8b1e6876db..a9fd8ea305 100644
--- a/hw/scsi/vhost-user-scsi.c
+++ b/hw/scsi/vhost-user-scsi.c
@@ -69,6 +69,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
     VHostUserSCSI *s = VHOST_USER_SCSI(dev);
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    struct vhost_virtqueue *vqs = NULL;
     Error *err = NULL;
     int ret;
 
@@ -93,6 +94,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
     vsc->dev.vq_index = 0;
     vsc->dev.backend_features = 0;
+    vqs = vsc->dev.vqs;
 
     ret = vhost_dev_init(&vsc->dev, &s->vhost_user,
                          VHOST_BACKEND_TYPE_USER, 0);
@@ -100,6 +102,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
         error_setg(errp, "vhost-user-scsi: vhost initialization failed: %s",
                    strerror(-ret));
         vhost_user_cleanup(&s->vhost_user);
+        g_free(vqs);
         return;
     }
 
-- 
MST

[Qemu-devel] [PULL v2 09/14] vhost: fix memory leak in vhost_user_scsi_realize

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

fix memory leak in vhost_user_scsi_realize

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556608500-12183-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-user-scsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c
index 8b1e6876db..a9fd8ea305 100644
--- a/hw/scsi/vhost-user-scsi.c
+++ b/hw/scsi/vhost-user-scsi.c
@@ -69,6 +69,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
     VHostUserSCSI *s = VHOST_USER_SCSI(dev);
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    struct vhost_virtqueue *vqs = NULL;
     Error *err = NULL;
     int ret;
 
@@ -93,6 +94,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
     vsc->dev.vq_index = 0;
     vsc->dev.backend_features = 0;
+    vqs = vsc->dev.vqs;
 
     ret = vhost_dev_init(&vsc->dev, &s->vhost_user,
                          VHOST_BACKEND_TYPE_USER, 0);
@@ -100,6 +102,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
         error_setg(errp, "vhost-user-scsi: vhost initialization failed: %s",
                    strerror(-ret));
         vhost_user_cleanup(&s->vhost_user);
+        g_free(vqs);
         return;
     }
 
-- 
MST

[Qemu-devel] [PULL v3 09/17] vhost: fix memory leak in vhost_user_scsi_realize

[Michael S. Tsirkin]

From: Jie Wang <wangjie88@huawei.com>

fix memory leak in vhost_user_scsi_realize

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556608500-12183-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-user-scsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c
index 8b1e6876db..a9fd8ea305 100644
--- a/hw/scsi/vhost-user-scsi.c
+++ b/hw/scsi/vhost-user-scsi.c
@@ -69,6 +69,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
     VHostUserSCSI *s = VHOST_USER_SCSI(dev);
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    struct vhost_virtqueue *vqs = NULL;
     Error *err = NULL;
     int ret;
 
@@ -93,6 +94,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
     vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
     vsc->dev.vq_index = 0;
     vsc->dev.backend_features = 0;
+    vqs = vsc->dev.vqs;
 
     ret = vhost_dev_init(&vsc->dev, &s->vhost_user,
                          VHOST_BACKEND_TYPE_USER, 0);
@@ -100,6 +102,7 @@ static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
         error_setg(errp, "vhost-user-scsi: vhost initialization failed: %s",
                    strerror(-ret));
         vhost_user_cleanup(&s->vhost_user);
+        g_free(vqs);
         return;
     }
 
-- 
MST

[Qemu-devel] [PATCH v2] docs: smbios: remove family=x from type2 entry description

[Igor Mammedov]

'family' option is not part of type 2 table and if user tries to use it
as such QEMU will error out with an unknow option error.
Drop it from docs lest it confuse users.

Fixes: b155eb1d04 ("smbios: document cmdline options for smbios type 2-4, 17 structures")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
 v2:
  - add summary to "Fixes:" in addition to commit message

 qemu-options.hx | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index 5daa5a8..dcdb808 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2080,7 +2080,7 @@ Specify SMBIOS type 0 fields
 @item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}]
 Specify SMBIOS type 1 fields
 
-@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}]
+@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}]
 Specify SMBIOS type 2 fields
 
 @item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}]
-- 
2.7.4

[Qemu-devel] [PULL 07/10] docs: smbios: remove family=x from type2 entry description

[Michael S. Tsirkin]

From: Igor Mammedov <imammedo@redhat.com>

'family' option is not part of type 2 table and if user tries to use it
as such QEMU will error out with an unknow option error.
Drop it from docs lest it confuse users.

Fixes: b155eb1d04 ("smbios: document cmdline options for smbios type 2-4, 17 structures")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1558448611-315074-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 qemu-options.hx | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index 39dc170429..0d8beb4afd 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2080,7 +2080,7 @@ Specify SMBIOS type 0 fields
 @item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}]
 Specify SMBIOS type 1 fields
 
-@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}]
+@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}]
 Specify SMBIOS type 2 fields
 
 @item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}]
-- 
MST

[Qemu-devel] [PULL v2 06/14] docs: smbios: remove family=x from type2 entry description

[Michael S. Tsirkin]

From: Igor Mammedov <imammedo@redhat.com>

'family' option is not part of type 2 table and if user tries to use it
as such QEMU will error out with an unknow option error.
Drop it from docs lest it confuse users.

Fixes: b155eb1d04 ("smbios: document cmdline options for smbios type 2-4, 17 structures")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1558448611-315074-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 qemu-options.hx | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index 39dc170429..0d8beb4afd 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2080,7 +2080,7 @@ Specify SMBIOS type 0 fields
 @item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}]
 Specify SMBIOS type 1 fields
 
-@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}]
+@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}]
 Specify SMBIOS type 2 fields
 
 @item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}]
-- 
MST

[Qemu-devel] [PULL v3 06/17] docs: smbios: remove family=x from type2 entry description

[Michael S. Tsirkin]

From: Igor Mammedov <imammedo@redhat.com>

'family' option is not part of type 2 table and if user tries to use it
as such QEMU will error out with an unknow option error.
Drop it from docs lest it confuse users.

Fixes: b155eb1d04 ("smbios: document cmdline options for smbios type 2-4, 17 structures")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1558448611-315074-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 qemu-options.hx | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index 39dc170429..0d8beb4afd 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2080,7 +2080,7 @@ Specify SMBIOS type 0 fields
 @item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}]
 Specify SMBIOS type 1 fields
 
-@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}]
+@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}]
 Specify SMBIOS type 2 fields
 
 @item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}]
-- 
MST

[Qemu-devel] [PULL 01/10] bios-tables-test: add diff allowed list

[Michael S. Tsirkin]

Expected table change is then handled like this:
1. add table to diff allowed list
2. change generating code (can be combined with 1)
3. maintainer runs a script to update expected +
   blows away allowed diff list

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/bios-tables-test-allowed-diff.h |  1 +
 tests/bios-tables-test.c              | 20 +++++++++++++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)
 create mode 100644 tests/bios-tables-test-allowed-diff.h

diff --git a/tests/bios-tables-test-allowed-diff.h b/tests/bios-tables-test-allowed-diff.h
new file mode 100644
index 0000000000..dfb8523c8b
--- /dev/null
+++ b/tests/bios-tables-test-allowed-diff.h
@@ -0,0 +1 @@
+/* List of comma-separated changed AML files to ignore */
diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 11e07be093..93db1a7265 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -342,6 +342,23 @@ try_again:
     return exp_tables;
 }
 
+static bool test_acpi_find_diff_allowed(AcpiSdtTable *sdt)
+{
+    const gchar *allowed_diff_file[] = {
+#include "bios-tables-test-allowed-diff.h"
+        NULL
+    };
+    int offset = strlen(data_dir) + 1;
+    const gchar **f;
+
+    for (f = allowed_diff_file; *f; ++f) {
+        if (!g_strcmp0(sdt->aml_file + offset, *f)) {
+            return true;
+        }
+    }
+    return false;
+}
+
 /* test the list of tables in @data->tables against reference tables */
 static void test_acpi_asl(test_data *data)
 {
@@ -396,7 +413,8 @@ static void test_acpi_asl(test_data *data)
                             "see ASL difference.");
                     }
                 }
-          }
+            }
+            g_assert(test_acpi_find_diff_allowed(sdt));
         }
         g_string_free(asl, true);
         g_string_free(exp_asl, true);
-- 
MST

Re: [Qemu-devel] [PULL 00/10] virtio, pci, pc: cleanups

[Michael S. Tsirkin]

On Wed, May 29, 2019 at 12:37:07PM -0400, Michael S. Tsirkin wrote:
> The following changes since commit 8c1ecb590497b0349c550607db923972b37f6963:
> 
>   Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging (2019-05-28 17:38:32 +0100)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_upstream
> 
> for you to fetch changes up to 8828a019eec52858140c7368494fb1523971cd5f:


Minor fixup: new commit ab50f22309a17c772c51931940596e707c200739

>   vhost: fix memory leak in vhost_user_scsi_realize (2019-05-29 12:34:45 -0400)
> 
> ----------------------------------------------------------------
> virtio, pci, pc: cleanups
> 
> not a lot going on, just some cleanups all over the place
> 
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> 
> ----------------------------------------------------------------
> David Gibson (3):
>       pcie: Simplify pci_adjust_config_limit()
>       pci: Make is_bridge a bool
>       pci: Fold pci_get_bus_devfn() into its sole caller
> 
> Igor Mammedov (1):
>       docs: smbios: remove family=x from type2 entry description
> 
> Jie Wang (3):
>       vhost: remove the dead code
>       vhost: fix incorrect print type
>       vhost: fix memory leak in vhost_user_scsi_realize
> 
> Michael S. Tsirkin (1):
>       bios-tables-test: add diff allowed list
> 
> Wei Yang (2):
>       hw/acpi: Consolidate build_mcfg to pci.c
>       acpi: pci: use build_append_foo() API to construct MCFG
> 
>  default-configs/i386-softmmu.mak      |   1 +
>  include/hw/acpi/acpi-defs.h           |  18 ------
>  include/hw/acpi/pci.h                 |   1 +
>  include/hw/pci/pci.h                  |   3 +-
>  include/hw/pci/pci_bus.h              |   8 ++-
>  tests/bios-tables-test-allowed-diff.h |   1 +
>  hw/acpi/pci.c                         |  61 ++++++++++++++++++++
>  hw/arm/virt-acpi-build.c              |  17 ------
>  hw/i386/acpi-build.c                  |  18 +-----
>  hw/pci-bridge/dec.c                   |   4 +-
>  hw/pci-bridge/i82801b11.c             |   2 +-
>  hw/pci-bridge/pci_bridge_dev.c        |   2 +-
>  hw/pci-bridge/pcie_pci_bridge.c       |   2 +-
>  hw/pci-bridge/pcie_root_port.c        |   2 +-
>  hw/pci-bridge/simba.c                 |   2 +-
>  hw/pci-bridge/xio3130_downstream.c    |   2 +-
>  hw/pci-bridge/xio3130_upstream.c      |   2 +-
>  hw/pci/pci.c                          | 101 +++++++++++++++++-----------------
>  hw/pci/pci_host.c                     |  13 +----
>  hw/ppc/spapr_pci.c                    |  34 ++++--------
>  hw/scsi/vhost-user-scsi.c             |   3 +
>  hw/virtio/vhost.c                     |   3 +-
>  tests/bios-tables-test.c              |  20 ++++++-
>  hw/acpi/Kconfig                       |   4 ++
>  hw/acpi/Makefile.objs                 |   1 +
>  hw/arm/Kconfig                        |   1 +
>  qemu-options.hx                       |   2 +-
>  27 files changed, 176 insertions(+), 152 deletions(-)
>  create mode 100644 tests/bios-tables-test-allowed-diff.h
>  create mode 100644 hw/acpi/pci.c
> 

[Qemu-devel] [PATCH v6 0/2] Extract build_mcfg Part 2

[Wei Yang]

This patch set tries to generalize MCFG table build process. Several patches
are already merged and these two are left for the following reasons:

  * conflict with latest upstream
  * ACPI_PCI dependency fix
  * missed reserved[8] in MCFG

v4->v5:
    * ACPI_PCI depends on both ACPI and PCI
    * rebase on latest master, adjust arm Kconfig
    * miss the reserved[8] of MCFG, add it back
    * make sure bios-tables-test all OK

Wei Yang (2):
  hw/acpi: Consolidate build_mcfg to pci.c
  acpi: pci: use build_append_foo() API to construct MCFG

 default-configs/i386-softmmu.mak |  1 +
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/acpi/pci.c                    | 61 ++++++++++++++++++++++++++++++++
 hw/arm/Kconfig                   |  1 +
 hw/arm/virt-acpi-build.c         | 17 ---------
 hw/i386/acpi-build.c             | 18 +---------
 include/hw/acpi/acpi-defs.h      | 18 ----------
 include/hw/acpi/pci.h            |  1 +
 9 files changed, 70 insertions(+), 52 deletions(-)
 create mode 100644 hw/acpi/pci.c

-- 
2.19.1

[Qemu-devel] [PATCH v6 1/2] hw/acpi: Consolidate build_mcfg to pci.c

[Wei Yang]

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

v4:
  * ACPI_PCI depends on both ACPI and PCI
  * rebase on latest master, adjust arm Kconfig
v3:
  * adjust changelog based on Igor's suggestion
---
 default-configs/i386-softmmu.mak |  1 +
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
 hw/arm/Kconfig                   |  1 +
 hw/arm/virt-acpi-build.c         | 17 ------------
 hw/i386/acpi-build.c             | 18 +------------
 include/hw/acpi/pci.h            |  1 +
 8 files changed, 55 insertions(+), 34 deletions(-)
 create mode 100644 hw/acpi/pci.c

diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index ba3fb3ff50..cd5ea391e8 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -25,3 +25,4 @@
 CONFIG_ISAPC=y
 CONFIG_I440FX=y
 CONFIG_Q35=y
+CONFIG_ACPI_PCI=y
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index eca3beed75..7c59cf900b 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -23,6 +23,10 @@ config ACPI_NVDIMM
     bool
     depends on ACPI
 
+config ACPI_PCI
+    bool
+    depends on ACPI && PCI
+
 config ACPI_VMGENID
     bool
     default y
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 2d46e3789a..661a9b8c2f 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 common-obj-y += acpi_interface.o
 common-obj-y += bios-linker-loader.o
 common-obj-y += aml-build.o
+common-obj-$(CONFIG_ACPI_PCI) += pci.o
 common-obj-$(CONFIG_TPM) += tpm.o
 
 common-obj-$(CONFIG_IPMI) += ipmi.o
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
new file mode 100644
index 0000000000..fa0fa30bb9
--- /dev/null
+++ b/hw/acpi/pci.c
@@ -0,0 +1,46 @@
+/*
+ * Support for generating PCI related ACPI tables and passing them to Guests
+ *
+ * Copyright (C) 2006 Fabrice Bellard
+ * Copyright (C) 2008-2010  Kevin O'Connor <kevin@koconnor.net>
+ * Copyright (C) 2013-2019 Red Hat Inc
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * Author: Wei Yang <richardw.yang@linux.intel.com>
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/pci.h"
+#include "hw/pci/pcie_host.h"
+
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
+{
+    AcpiTableMcfg *mcfg;
+    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+
+    mcfg = acpi_data_push(table_data, len);
+    mcfg->allocation[0].address = cpu_to_le64(info->base);
+
+    /* Only a single allocation so no need to play with segments */
+    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
+    mcfg->allocation[0].start_bus_number = 0;
+    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+
+    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+}
+
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index af8cffde9c..9aced9d54d 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -19,6 +19,7 @@ config ARM_VIRT
     select PLATFORM_BUS
     select SMBIOS
     select VIRTIO_MMIO
+    select ACPI_PCI
 
 config CHEETAH
     bool
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index e7c96d658e..4a64f9985c 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
-static void
-build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /* GTDT */
 static void
 build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 0d78d73894..85dc1640bc 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                  table_data->len - srat_start, 1, NULL, NULL);
 }
 
-static void
-build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /*
  * VT-d spec 8.1 DMA Remapping Reporting Structure
  * (version Oct. 2014 or later)
@@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
     }
     if (acpi_get_mcfg(&mcfg)) {
         acpi_add_table(table_offsets, tables_blob);
-        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
+        build_mcfg(tables_blob, tables->linker, &mcfg);
     }
     if (x86_iommu_get_default()) {
         IommuType IOMMUType = x86_iommu_get_type();
diff --git a/include/hw/acpi/pci.h b/include/hw/acpi/pci.h
index 124af7d32a..8bbd32cf45 100644
--- a/include/hw/acpi/pci.h
+++ b/include/hw/acpi/pci.h
@@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
     uint32_t size;
 } AcpiMcfgInfo;
 
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
 #endif
-- 
2.19.1

Re: [Qemu-devel] [PATCH v6 1/2] hw/acpi: Consolidate build_mcfg to pci.c

[Igor Mammedov]

On Tue, 21 May 2019 14:28:35 +0800
Wei Yang <richardw.yang@linux.intel.com> wrote:

> Now we have two identical build_mcfg functions.
> 
> Consolidate them in acpi/pci.c.
> 
> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> 
> v4:
>   * ACPI_PCI depends on both ACPI and PCI
>   * rebase on latest master, adjust arm Kconfig
> v3:
>   * adjust changelog based on Igor's suggestion
> ---
>  default-configs/i386-softmmu.mak |  1 +
>  hw/acpi/Kconfig                  |  4 +++
>  hw/acpi/Makefile.objs            |  1 +
>  hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
>  hw/arm/Kconfig                   |  1 +
>  hw/arm/virt-acpi-build.c         | 17 ------------
>  hw/i386/acpi-build.c             | 18 +------------
>  include/hw/acpi/pci.h            |  1 +
>  8 files changed, 55 insertions(+), 34 deletions(-)
>  create mode 100644 hw/acpi/pci.c
> 
> diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> index ba3fb3ff50..cd5ea391e8 100644
> --- a/default-configs/i386-softmmu.mak
> +++ b/default-configs/i386-softmmu.mak
> @@ -25,3 +25,4 @@
>  CONFIG_ISAPC=y
>  CONFIG_I440FX=y
>  CONFIG_Q35=y
> +CONFIG_ACPI_PCI=y
> diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
> index eca3beed75..7c59cf900b 100644
> --- a/hw/acpi/Kconfig
> +++ b/hw/acpi/Kconfig
> @@ -23,6 +23,10 @@ config ACPI_NVDIMM
>      bool
>      depends on ACPI
>  
> +config ACPI_PCI
> +    bool
> +    depends on ACPI && PCI
> +
>  config ACPI_VMGENID
>      bool
>      default y
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index 2d46e3789a..661a9b8c2f 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>  common-obj-y += acpi_interface.o
>  common-obj-y += bios-linker-loader.o
>  common-obj-y += aml-build.o
> +common-obj-$(CONFIG_ACPI_PCI) += pci.o
>  common-obj-$(CONFIG_TPM) += tpm.o
>  
>  common-obj-$(CONFIG_IPMI) += ipmi.o
> diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
> new file mode 100644
> index 0000000000..fa0fa30bb9
> --- /dev/null
> +++ b/hw/acpi/pci.c
> @@ -0,0 +1,46 @@
> +/*
> + * Support for generating PCI related ACPI tables and passing them to Guests
> + *
> + * Copyright (C) 2006 Fabrice Bellard
> + * Copyright (C) 2008-2010  Kevin O'Connor <kevin@koconnor.net>
> + * Copyright (C) 2013-2019 Red Hat Inc
> + * Copyright (C) 2019 Intel Corporation
> + *
> + * Author: Wei Yang <richardw.yang@linux.intel.com>
> + * Author: Michael S. Tsirkin <mst@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> +
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> +
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/pci.h"
> +#include "hw/pci/pcie_host.h"
> +
> +void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
> +{
> +    AcpiTableMcfg *mcfg;
> +    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
> +
> +    mcfg = acpi_data_push(table_data, len);
> +    mcfg->allocation[0].address = cpu_to_le64(info->base);
> +
> +    /* Only a single allocation so no need to play with segments */
> +    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
> +    mcfg->allocation[0].start_bus_number = 0;
> +    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
> +
> +    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
> +}
> +
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index af8cffde9c..9aced9d54d 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -19,6 +19,7 @@ config ARM_VIRT
>      select PLATFORM_BUS
>      select SMBIOS
>      select VIRTIO_MMIO
> +    select ACPI_PCI
>  
>  config CHEETAH
>      bool
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index e7c96d658e..4a64f9985c 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>                   "SRAT", table_data->len - srat_start, 3, NULL, NULL);
>  }
>  
> -static void
> -build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
> -{
> -    AcpiTableMcfg *mcfg;
> -    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
> -
> -    mcfg = acpi_data_push(table_data, len);
> -    mcfg->allocation[0].address = cpu_to_le64(info->base);
> -
> -    /* Only a single allocation so no need to play with segments */
> -    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
> -    mcfg->allocation[0].start_bus_number = 0;
> -    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
> -
> -    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
> -}
> -
>  /* GTDT */
>  static void
>  build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 0d78d73894..85dc1640bc 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
>                   table_data->len - srat_start, 1, NULL, NULL);
>  }
>  
> -static void
> -build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
> -{
> -    AcpiTableMcfg *mcfg;
> -    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
> -
> -    mcfg = acpi_data_push(table_data, len);
> -    mcfg->allocation[0].address = cpu_to_le64(info->base);
> -    /* Only a single allocation so no need to play with segments */
> -    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
> -    mcfg->allocation[0].start_bus_number = 0;
> -    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
> -
> -    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
> -}
> -
>  /*
>   * VT-d spec 8.1 DMA Remapping Reporting Structure
>   * (version Oct. 2014 or later)
> @@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
>      }
>      if (acpi_get_mcfg(&mcfg)) {
>          acpi_add_table(table_offsets, tables_blob);
> -        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
> +        build_mcfg(tables_blob, tables->linker, &mcfg);
>      }
>      if (x86_iommu_get_default()) {
>          IommuType IOMMUType = x86_iommu_get_type();
> diff --git a/include/hw/acpi/pci.h b/include/hw/acpi/pci.h
> index 124af7d32a..8bbd32cf45 100644
> --- a/include/hw/acpi/pci.h
> +++ b/include/hw/acpi/pci.h
> @@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
>      uint32_t size;
>  } AcpiMcfgInfo;
>  
> +void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
>  #endif

[Qemu-devel] [PULL 02/10] hw/acpi: Consolidate build_mcfg to pci.c

[Michael S. Tsirkin]

From: Wei Yang <richardw.yang@linux.intel.com>

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

v4:
  * ACPI_PCI depends on both ACPI and PCI
  * rebase on latest master, adjust arm Kconfig
v3:
  * adjust changelog based on Igor's suggestion
Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 default-configs/i386-softmmu.mak |  1 +
 include/hw/acpi/pci.h            |  1 +
 hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
 hw/arm/virt-acpi-build.c         | 17 ------------
 hw/i386/acpi-build.c             | 18 +------------
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/arm/Kconfig                   |  1 +
 8 files changed, 55 insertions(+), 34 deletions(-)
 create mode 100644 hw/acpi/pci.c

diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index ba3fb3ff50..cd5ea391e8 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -25,3 +25,4 @@
 CONFIG_ISAPC=y
 CONFIG_I440FX=y
 CONFIG_Q35=y
+CONFIG_ACPI_PCI=y
diff --git a/include/hw/acpi/pci.h b/include/hw/acpi/pci.h
index 124af7d32a..8bbd32cf45 100644
--- a/include/hw/acpi/pci.h
+++ b/include/hw/acpi/pci.h
@@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
     uint32_t size;
 } AcpiMcfgInfo;
 
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
 #endif
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
new file mode 100644
index 0000000000..fa0fa30bb9
--- /dev/null
+++ b/hw/acpi/pci.c
@@ -0,0 +1,46 @@
+/*
+ * Support for generating PCI related ACPI tables and passing them to Guests
+ *
+ * Copyright (C) 2006 Fabrice Bellard
+ * Copyright (C) 2008-2010  Kevin O'Connor <kevin@koconnor.net>
+ * Copyright (C) 2013-2019 Red Hat Inc
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * Author: Wei Yang <richardw.yang@linux.intel.com>
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/pci.h"
+#include "hw/pci/pcie_host.h"
+
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
+{
+    AcpiTableMcfg *mcfg;
+    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+
+    mcfg = acpi_data_push(table_data, len);
+    mcfg->allocation[0].address = cpu_to_le64(info->base);
+
+    /* Only a single allocation so no need to play with segments */
+    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
+    mcfg->allocation[0].start_bus_number = 0;
+    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+
+    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+}
+
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index e7c96d658e..4a64f9985c 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
-static void
-build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /* GTDT */
 static void
 build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 0d78d73894..85dc1640bc 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                  table_data->len - srat_start, 1, NULL, NULL);
 }
 
-static void
-build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /*
  * VT-d spec 8.1 DMA Remapping Reporting Structure
  * (version Oct. 2014 or later)
@@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
     }
     if (acpi_get_mcfg(&mcfg)) {
         acpi_add_table(table_offsets, tables_blob);
-        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
+        build_mcfg(tables_blob, tables->linker, &mcfg);
     }
     if (x86_iommu_get_default()) {
         IommuType IOMMUType = x86_iommu_get_type();
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index eca3beed75..7c59cf900b 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -23,6 +23,10 @@ config ACPI_NVDIMM
     bool
     depends on ACPI
 
+config ACPI_PCI
+    bool
+    depends on ACPI && PCI
+
 config ACPI_VMGENID
     bool
     default y
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 2d46e3789a..661a9b8c2f 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 common-obj-y += acpi_interface.o
 common-obj-y += bios-linker-loader.o
 common-obj-y += aml-build.o
+common-obj-$(CONFIG_ACPI_PCI) += pci.o
 common-obj-$(CONFIG_TPM) += tpm.o
 
 common-obj-$(CONFIG_IPMI) += ipmi.o
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index af8cffde9c..9aced9d54d 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -19,6 +19,7 @@ config ARM_VIRT
     select PLATFORM_BUS
     select SMBIOS
     select VIRTIO_MMIO
+    select ACPI_PCI
 
 config CHEETAH
     bool
-- 
MST

[Qemu-devel] [PULL v2 01/14] hw/acpi: Consolidate build_mcfg to pci.c

[Michael S. Tsirkin]

From: Wei Yang <richardw.yang@linux.intel.com>

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

v4:
  * ACPI_PCI depends on both ACPI and PCI
  * rebase on latest master, adjust arm Kconfig
v3:
  * adjust changelog based on Igor's suggestion
Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 default-configs/i386-softmmu.mak |  1 +
 include/hw/acpi/pci.h            |  1 +
 hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
 hw/arm/virt-acpi-build.c         | 17 ------------
 hw/i386/acpi-build.c             | 18 +------------
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/arm/Kconfig                   |  1 +
 8 files changed, 55 insertions(+), 34 deletions(-)
 create mode 100644 hw/acpi/pci.c

diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index ba3fb3ff50..cd5ea391e8 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -25,3 +25,4 @@
 CONFIG_ISAPC=y
 CONFIG_I440FX=y
 CONFIG_Q35=y
+CONFIG_ACPI_PCI=y
diff --git a/include/hw/acpi/pci.h b/include/hw/acpi/pci.h
index 124af7d32a..8bbd32cf45 100644
--- a/include/hw/acpi/pci.h
+++ b/include/hw/acpi/pci.h
@@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
     uint32_t size;
 } AcpiMcfgInfo;
 
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
 #endif
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
new file mode 100644
index 0000000000..fa0fa30bb9
--- /dev/null
+++ b/hw/acpi/pci.c
@@ -0,0 +1,46 @@
+/*
+ * Support for generating PCI related ACPI tables and passing them to Guests
+ *
+ * Copyright (C) 2006 Fabrice Bellard
+ * Copyright (C) 2008-2010  Kevin O'Connor <kevin@koconnor.net>
+ * Copyright (C) 2013-2019 Red Hat Inc
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * Author: Wei Yang <richardw.yang@linux.intel.com>
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/pci.h"
+#include "hw/pci/pcie_host.h"
+
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
+{
+    AcpiTableMcfg *mcfg;
+    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+
+    mcfg = acpi_data_push(table_data, len);
+    mcfg->allocation[0].address = cpu_to_le64(info->base);
+
+    /* Only a single allocation so no need to play with segments */
+    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
+    mcfg->allocation[0].start_bus_number = 0;
+    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+
+    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+}
+
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index e7c96d658e..4a64f9985c 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
-static void
-build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /* GTDT */
 static void
 build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 0d78d73894..85dc1640bc 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                  table_data->len - srat_start, 1, NULL, NULL);
 }
 
-static void
-build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /*
  * VT-d spec 8.1 DMA Remapping Reporting Structure
  * (version Oct. 2014 or later)
@@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
     }
     if (acpi_get_mcfg(&mcfg)) {
         acpi_add_table(table_offsets, tables_blob);
-        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
+        build_mcfg(tables_blob, tables->linker, &mcfg);
     }
     if (x86_iommu_get_default()) {
         IommuType IOMMUType = x86_iommu_get_type();
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index eca3beed75..7c59cf900b 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -23,6 +23,10 @@ config ACPI_NVDIMM
     bool
     depends on ACPI
 
+config ACPI_PCI
+    bool
+    depends on ACPI && PCI
+
 config ACPI_VMGENID
     bool
     default y
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 2d46e3789a..661a9b8c2f 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 common-obj-y += acpi_interface.o
 common-obj-y += bios-linker-loader.o
 common-obj-y += aml-build.o
+common-obj-$(CONFIG_ACPI_PCI) += pci.o
 common-obj-$(CONFIG_TPM) += tpm.o
 
 common-obj-$(CONFIG_IPMI) += ipmi.o
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index af8cffde9c..9aced9d54d 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -19,6 +19,7 @@ config ARM_VIRT
     select PLATFORM_BUS
     select SMBIOS
     select VIRTIO_MMIO
+    select ACPI_PCI
 
 config CHEETAH
     bool
-- 
MST

[Qemu-devel] [PULL v3 01/17] hw/acpi: Consolidate build_mcfg to pci.c

[Michael S. Tsirkin]

From: Wei Yang <richardw.yang@linux.intel.com>

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

v4:
  * ACPI_PCI depends on both ACPI and PCI
  * rebase on latest master, adjust arm Kconfig
v3:
  * adjust changelog based on Igor's suggestion
Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 default-configs/i386-softmmu.mak |  1 +
 include/hw/acpi/pci.h            |  1 +
 hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
 hw/arm/virt-acpi-build.c         | 17 ------------
 hw/i386/acpi-build.c             | 18 +------------
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/arm/Kconfig                   |  1 +
 8 files changed, 55 insertions(+), 34 deletions(-)
 create mode 100644 hw/acpi/pci.c

diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index ba3fb3ff50..cd5ea391e8 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -25,3 +25,4 @@
 CONFIG_ISAPC=y
 CONFIG_I440FX=y
 CONFIG_Q35=y
+CONFIG_ACPI_PCI=y
diff --git a/include/hw/acpi/pci.h b/include/hw/acpi/pci.h
index 124af7d32a..8bbd32cf45 100644
--- a/include/hw/acpi/pci.h
+++ b/include/hw/acpi/pci.h
@@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
     uint32_t size;
 } AcpiMcfgInfo;
 
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
 #endif
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
new file mode 100644
index 0000000000..fa0fa30bb9
--- /dev/null
+++ b/hw/acpi/pci.c
@@ -0,0 +1,46 @@
+/*
+ * Support for generating PCI related ACPI tables and passing them to Guests
+ *
+ * Copyright (C) 2006 Fabrice Bellard
+ * Copyright (C) 2008-2010  Kevin O'Connor <kevin@koconnor.net>
+ * Copyright (C) 2013-2019 Red Hat Inc
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * Author: Wei Yang <richardw.yang@linux.intel.com>
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/pci.h"
+#include "hw/pci/pcie_host.h"
+
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
+{
+    AcpiTableMcfg *mcfg;
+    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+
+    mcfg = acpi_data_push(table_data, len);
+    mcfg->allocation[0].address = cpu_to_le64(info->base);
+
+    /* Only a single allocation so no need to play with segments */
+    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
+    mcfg->allocation[0].start_bus_number = 0;
+    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+
+    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+}
+
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index e7c96d658e..4a64f9985c 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
-static void
-build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /* GTDT */
 static void
 build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 0d78d73894..85dc1640bc 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                  table_data->len - srat_start, 1, NULL, NULL);
 }
 
-static void
-build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /*
  * VT-d spec 8.1 DMA Remapping Reporting Structure
  * (version Oct. 2014 or later)
@@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
     }
     if (acpi_get_mcfg(&mcfg)) {
         acpi_add_table(table_offsets, tables_blob);
-        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
+        build_mcfg(tables_blob, tables->linker, &mcfg);
     }
     if (x86_iommu_get_default()) {
         IommuType IOMMUType = x86_iommu_get_type();
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index eca3beed75..7c59cf900b 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -23,6 +23,10 @@ config ACPI_NVDIMM
     bool
     depends on ACPI
 
+config ACPI_PCI
+    bool
+    depends on ACPI && PCI
+
 config ACPI_VMGENID
     bool
     default y
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 2d46e3789a..661a9b8c2f 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 common-obj-y += acpi_interface.o
 common-obj-y += bios-linker-loader.o
 common-obj-y += aml-build.o
+common-obj-$(CONFIG_ACPI_PCI) += pci.o
 common-obj-$(CONFIG_TPM) += tpm.o
 
 common-obj-$(CONFIG_IPMI) += ipmi.o
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index af8cffde9c..9aced9d54d 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -19,6 +19,7 @@ config ARM_VIRT
     select PLATFORM_BUS
     select SMBIOS
     select VIRTIO_MMIO
+    select ACPI_PCI
 
 config CHEETAH
     bool
-- 
MST

[Qemu-devel] [PATCH v6 2/2] acpi: pci: use build_append_foo() API to construct MCFG

[Wei Yang]

build_append_foo() API doesn't need explicit endianness conversions
which eliminates a source of errors and it makes build_mcfg() look like
declarative definition of MCFG table in ACPI spec, which makes it easy
to review.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

v3:
   * add some comment on the Configuration Space base address allocation
     structure
v2:
   * miss the reserved[8] of MCFG in last version, add it back
   * drop SOBs and make sure bios-tables-test all OK
---
 hw/acpi/pci.c               | 39 +++++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 -----------------
 2 files changed, 27 insertions(+), 30 deletions(-)

diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
index fa0fa30bb9..9510597a19 100644
--- a/hw/acpi/pci.c
+++ b/hw/acpi/pci.c
@@ -30,17 +30,32 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    int mcfg_start = table_data->len;
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
+
+    /*
+     * Memory Mapped Enhanced Configuration Space Base Address Allocation
+     * Structure
+     */
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index f9aa4bd398..57a3f58b0c 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
-- 
2.19.1

[Qemu-devel] [PULL 03/10] acpi: pci: use build_append_foo() API to construct MCFG

[Michael S. Tsirkin]

From: Wei Yang <richardw.yang@linux.intel.com>

build_append_foo() API doesn't need explicit endianness conversions
which eliminates a source of errors and it makes build_mcfg() look like
declarative definition of MCFG table in ACPI spec, which makes it easy
to review.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

v3:
   * add some comment on the Configuration Space base address allocation
     structure
v2:
   * miss the reserved[8] of MCFG in last version, add it back
   * drop SOBs and make sure bios-tables-test all OK
Message-Id: <20190521062836.6541-3-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/acpi/acpi-defs.h | 18 ------------------
 hw/acpi/pci.c               | 33 ++++++++++++++++++++++++---------
 2 files changed, 24 insertions(+), 27 deletions(-)

diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index f9aa4bd398..57a3f58b0c 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
index fa0fa30bb9..9510597a19 100644
--- a/hw/acpi/pci.c
+++ b/hw/acpi/pci.c
@@ -30,17 +30,32 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+    int mcfg_start = table_data->len;
 
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
 
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+    /*
+     * Memory Mapped Enhanced Configuration Space Base Address Allocation
+     * Structure
+     */
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
 
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
-- 
MST

[Qemu-devel] [PULL v2 02/14] acpi: pci: use build_append_foo() API to construct MCFG

[Michael S. Tsirkin]

From: Wei Yang <richardw.yang@linux.intel.com>

build_append_foo() API doesn't need explicit endianness conversions
which eliminates a source of errors and it makes build_mcfg() look like
declarative definition of MCFG table in ACPI spec, which makes it easy
to review.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

v3:
   * add some comment on the Configuration Space base address allocation
     structure
v2:
   * miss the reserved[8] of MCFG in last version, add it back
   * drop SOBs and make sure bios-tables-test all OK
Message-Id: <20190521062836.6541-3-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/acpi/acpi-defs.h | 18 ------------------
 hw/acpi/pci.c               | 33 ++++++++++++++++++++++++---------
 2 files changed, 24 insertions(+), 27 deletions(-)

diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index f9aa4bd398..57a3f58b0c 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
index fa0fa30bb9..9510597a19 100644
--- a/hw/acpi/pci.c
+++ b/hw/acpi/pci.c
@@ -30,17 +30,32 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+    int mcfg_start = table_data->len;
 
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
 
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+    /*
+     * Memory Mapped Enhanced Configuration Space Base Address Allocation
+     * Structure
+     */
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
 
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
-- 
MST

[Qemu-devel] [PULL v3 02/17] acpi: pci: use build_append_foo() API to construct MCFG

[Michael S. Tsirkin]

From: Wei Yang <richardw.yang@linux.intel.com>

build_append_foo() API doesn't need explicit endianness conversions
which eliminates a source of errors and it makes build_mcfg() look like
declarative definition of MCFG table in ACPI spec, which makes it easy
to review.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

v3:
   * add some comment on the Configuration Space base address allocation
     structure
v2:
   * miss the reserved[8] of MCFG in last version, add it back
   * drop SOBs and make sure bios-tables-test all OK
Message-Id: <20190521062836.6541-3-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/acpi/acpi-defs.h | 18 ------------------
 hw/acpi/pci.c               | 33 ++++++++++++++++++++++++---------
 2 files changed, 24 insertions(+), 27 deletions(-)

diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index f9aa4bd398..57a3f58b0c 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
diff --git a/hw/acpi/pci.c b/hw/acpi/pci.c
index fa0fa30bb9..9510597a19 100644
--- a/hw/acpi/pci.c
+++ b/hw/acpi/pci.c
@@ -30,17 +30,32 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+    int mcfg_start = table_data->len;
 
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
 
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+    /*
+     * Memory Mapped Enhanced Configuration Space Base Address Allocation
+     * Structure
+     */
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
 
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
-- 
MST

[Qemu-devel] [PATCH v4 0/5] Simplify some not-really-necessary PCI bus callbacks

[David Gibson]

c2077e2c "pci: Adjust PCI config limit based on bus topology"
introduced checking the availability of extended config space for
PCI-E devices which are in a bus topology that doesn't permit extended
config space access (e.g. under PCI-E to PCI then PCI to PCI-E
bridges).

This caused some problems for the spapr para-virtual PCI bus which
_does_ allow extended config space access, despite acting in most ways
like a vanilla PCI bus.

Greg Kurz made a fix for that which was merged as 1c685a90263 "pci:
Allow PCI bus subtypes to support extended config space accesses".
While that was an appropriate minimal fix for the 4.0 hard freeze, it
was kind of a hack longer term.

This series implements a simpler way of handling the extended config
space permission, which works for both the normal and weird-PAPR
cases.  While we're there, we also make other small cleanups to the
PCI code.

Changes since v3:
 * Remove a redundant call to pci_find_bus_nr() found during review

Changes since v2:
 * Add some minor additional cleanups (patches 4 & 5)
 * Minor whitespace tweak to patch 3

David Gibson (5):
  pcie: Remove redundant test in pcie_mmcfg_data_{read,write}()
  pci: Simplify pci_bus_is_root()
  pcie: Simplify pci_adjust_config_limit()
  pci: Make is_bridge a bool
  pci: Fold pci_get_bus_devfn() into its sole caller

 hw/pci-bridge/dec.c                 |   4 +-
 hw/pci-bridge/i82801b11.c           |   2 +-
 hw/pci-bridge/pci_bridge_dev.c      |   2 +-
 hw/pci-bridge/pci_expander_bridge.c |   6 --
 hw/pci-bridge/pcie_pci_bridge.c     |   2 +-
 hw/pci-bridge/pcie_root_port.c      |   2 +-
 hw/pci-bridge/simba.c               |   2 +-
 hw/pci-bridge/xio3130_downstream.c  |   2 +-
 hw/pci-bridge/xio3130_upstream.c    |   2 +-
 hw/pci/pci.c                        | 115 +++++++++++++---------------
 hw/pci/pci_host.c                   |  13 +---
 hw/pci/pcie_host.c                  |  10 ---
 hw/ppc/spapr_pci.c                  |  34 +++-----
 hw/virtio/virtio-pci.c              |   1 +
 include/hw/pci/pci.h                |   4 +-
 include/hw/pci/pci_bus.h            |  20 ++++-
 16 files changed, 95 insertions(+), 126 deletions(-)

-- 
2.21.0

[Qemu-devel] [PATCH v4 1/5] pcie: Remove redundant test in pcie_mmcfg_data_{read, write}()

[David Gibson]

These functions have an explicit test for accesses above the device's
config size.  But pci_host_config_{read,write}_common() which they're
about to call already have checks against the config space limit and
do the right thing.  So, remove the redundant tests.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci/pcie_host.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/hw/pci/pcie_host.c b/hw/pci/pcie_host.c
index 553db56778..1ee4945a6d 100644
--- a/hw/pci/pcie_host.c
+++ b/hw/pci/pcie_host.c
@@ -47,11 +47,6 @@ static void pcie_mmcfg_data_write(void *opaque, hwaddr mmcfg_addr,
     }
     addr = PCIE_MMCFG_CONFOFFSET(mmcfg_addr);
     limit = pci_config_size(pci_dev);
-    if (limit <= addr) {
-        /* conventional pci device can be behind pcie-to-pci bridge.
-           256 <= addr < 4K has no effects. */
-        return;
-    }
     pci_host_config_write_common(pci_dev, addr, limit, val, len);
 }
 
@@ -70,11 +65,6 @@ static uint64_t pcie_mmcfg_data_read(void *opaque,
     }
     addr = PCIE_MMCFG_CONFOFFSET(mmcfg_addr);
     limit = pci_config_size(pci_dev);
-    if (limit <= addr) {
-        /* conventional pci device can be behind pcie-to-pci bridge.
-           256 <= addr < 4K has no effects. */
-        return ~0x0;
-    }
     return pci_host_config_read_common(pci_dev, addr, limit, len);
 }
 
-- 
2.21.0

[Qemu-devel] [PATCH v4 2/5] pci: Simplify pci_bus_is_root()

[David Gibson]

pci_bus_is_root() currently relies on a method in the PCIBusClass.
But it's always known if a PCI bus is a root bus when we create it, so
using a dynamic method is overkill.

This replaces it with an IS_ROOT bit in a new flags field, which is set on
root buses and otherwise clear.  As a bonus this removes the special
is_root logic from pci_expander_bridge, since it already creates its bus
as a root bus.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci-bridge/pci_expander_bridge.c |  6 ------
 hw/pci/pci.c                        | 14 ++------------
 hw/virtio/virtio-pci.c              |  1 +
 include/hw/pci/pci.h                |  1 -
 include/hw/pci/pci_bus.h            | 12 +++++++++++-
 5 files changed, 14 insertions(+), 20 deletions(-)

diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index e62de4218f..ca66bc721a 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -66,11 +66,6 @@ static int pxb_bus_num(PCIBus *bus)
     return pxb->bus_nr;
 }
 
-static bool pxb_is_root(PCIBus *bus)
-{
-    return true; /* by definition */
-}
-
 static uint16_t pxb_bus_numa_node(PCIBus *bus)
 {
     PXBDev *pxb = convert_to_pxb(bus->parent_dev);
@@ -83,7 +78,6 @@ static void pxb_bus_class_init(ObjectClass *class, void *data)
     PCIBusClass *pbc = PCI_BUS_CLASS(class);
 
     pbc->bus_num = pxb_bus_num;
-    pbc->is_root = pxb_is_root;
     pbc->numa_node = pxb_bus_numa_node;
 }
 
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index a78023f669..b386777045 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -129,14 +129,9 @@ static void pci_bus_unrealize(BusState *qbus, Error **errp)
     vmstate_unregister(NULL, &vmstate_pcibus, bus);
 }
 
-static bool pcibus_is_root(PCIBus *bus)
-{
-    return !bus->parent_dev;
-}
-
 static int pcibus_num(PCIBus *bus)
 {
-    if (pcibus_is_root(bus)) {
+    if (pci_bus_is_root(bus)) {
         return 0; /* pci host bridge */
     }
     return bus->parent_dev->config[PCI_SECONDARY_BUS];
@@ -164,7 +159,6 @@ static void pci_bus_class_init(ObjectClass *klass, void *data)
     k->unrealize = pci_bus_unrealize;
     k->reset = pcibus_reset;
 
-    pbc->is_root = pcibus_is_root;
     pbc->bus_num = pcibus_num;
     pbc->numa_node = pcibus_numa_node;
     pbc->allows_extended_config_space = pcibus_allows_extended_config_space;
@@ -398,6 +392,7 @@ static void pci_root_bus_init(PCIBus *bus, DeviceState *parent,
     bus->slot_reserved_mask = 0x0;
     bus->address_space_mem = address_space_mem;
     bus->address_space_io = address_space_io;
+    bus->flags |= PCI_BUS_IS_ROOT;
 
     /* host bridge */
     QLIST_INIT(&bus->child);
@@ -415,11 +410,6 @@ bool pci_bus_is_express(PCIBus *bus)
     return object_dynamic_cast(OBJECT(bus), TYPE_PCIE_BUS);
 }
 
-bool pci_bus_is_root(PCIBus *bus)
-{
-    return PCI_BUS_GET_CLASS(bus)->is_root(bus);
-}
-
 bool pci_bus_allows_extended_config_space(PCIBus *bus)
 {
     return PCI_BUS_GET_CLASS(bus)->allows_extended_config_space(bus);
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index cb44e19b67..942173d830 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -20,6 +20,7 @@
 #include "standard-headers/linux/virtio_pci.h"
 #include "hw/virtio/virtio.h"
 #include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
 #include "qapi/error.h"
 #include "qemu/error-report.h"
 #include "hw/pci/msi.h"
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index fdd4c43d3a..edf44de21d 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -395,7 +395,6 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
 #define TYPE_PCIE_BUS "PCIE"
 
 bool pci_bus_is_express(PCIBus *bus);
-bool pci_bus_is_root(PCIBus *bus);
 bool pci_bus_allows_extended_config_space(PCIBus *bus);
 
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index f6df834170..aea98d5040 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -15,14 +15,19 @@ typedef struct PCIBusClass {
     BusClass parent_class;
     /*< public >*/
 
-    bool (*is_root)(PCIBus *bus);
     int (*bus_num)(PCIBus *bus);
     uint16_t (*numa_node)(PCIBus *bus);
     bool (*allows_extended_config_space)(PCIBus *bus);
 } PCIBusClass;
 
+enum PCIBusFlags {
+    /* This bus is the root of a PCI domain */
+    PCI_BUS_IS_ROOT                                         = 0x0001,
+};
+
 struct PCIBus {
     BusState qbus;
+    enum PCIBusFlags flags;
     PCIIOMMUFunc iommu_fn;
     void *iommu_opaque;
     uint8_t devfn_min;
@@ -47,4 +52,9 @@ struct PCIBus {
     Notifier machine_done;
 };
 
+static inline bool pci_bus_is_root(PCIBus *bus)
+{
+    return !!(bus->flags & PCI_BUS_IS_ROOT);
+}
+
 #endif /* QEMU_PCI_BUS_H */
-- 
2.21.0

[Qemu-devel] [PATCH v4 3/5] pcie: Simplify pci_adjust_config_limit()

[David Gibson]

Since c2077e2c "pci: Adjust PCI config limit based on bus topology",
pci_adjust_config_limit() has been used in the config space read and write
paths to only permit access to extended config space on buses which permit
it.  Specifically it prevents access on devices below a vanilla-PCI bus via
some combination of bridges, even if both the host bridge and the device
itself are PCI-E.

It accomplishes this with a somewhat complex call up the chain of bridges
to see if any of them prohibit extended config space access.  This is
overly complex, since we can always know if the bus will support such
access at the point it is constructed.

This patch simplifies the test by using a flag in the PCIBus instance
indicating whether extended configuration space is accessible.  It is
false for vanilla PCI buses.  For PCI-E buses, it is true for root
buses and equal to the parent bus's's capability otherwise.

For the special case of sPAPR's paravirtualized PCI root bus, which
acts mostly like vanilla PCI, but does allow extended config space
access, we override the default value of the flag from the host bridge
code.

This should cause no behavioural change.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci/pci.c             | 41 ++++++++++++++++++++++------------------
 hw/pci/pci_host.c        | 13 +++----------
 hw/ppc/spapr_pci.c       | 34 ++++++++++-----------------------
 include/hw/pci/pci.h     |  1 -
 include/hw/pci/pci_bus.h |  8 +++++++-
 5 files changed, 43 insertions(+), 54 deletions(-)

diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index b386777045..7e5f8d001b 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -120,6 +120,27 @@ static void pci_bus_realize(BusState *qbus, Error **errp)
     vmstate_register(NULL, -1, &vmstate_pcibus, bus);
 }
 
+static void pcie_bus_realize(BusState *qbus, Error **errp)
+{
+    PCIBus *bus = PCI_BUS(qbus);
+
+    pci_bus_realize(qbus, errp);
+
+    /*
+     * A PCI-E bus can support extended config space if it's the root
+     * bus, or if the bus/bridge above it does as well
+     */
+    if (pci_bus_is_root(bus)) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    } else {
+        PCIBus *parent_bus = pci_get_bus(bus->parent_dev);
+
+        if (pci_bus_allows_extended_config_space(parent_bus)) {
+            bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+        }
+    }
+}
+
 static void pci_bus_unrealize(BusState *qbus, Error **errp)
 {
     PCIBus *bus = PCI_BUS(qbus);
@@ -142,11 +163,6 @@ static uint16_t pcibus_numa_node(PCIBus *bus)
     return NUMA_NODE_UNASSIGNED;
 }
 
-static bool pcibus_allows_extended_config_space(PCIBus *bus)
-{
-    return false;
-}
-
 static void pci_bus_class_init(ObjectClass *klass, void *data)
 {
     BusClass *k = BUS_CLASS(klass);
@@ -161,7 +177,6 @@ static void pci_bus_class_init(ObjectClass *klass, void *data)
 
     pbc->bus_num = pcibus_num;
     pbc->numa_node = pcibus_numa_node;
-    pbc->allows_extended_config_space = pcibus_allows_extended_config_space;
 }
 
 static const TypeInfo pci_bus_info = {
@@ -182,16 +197,11 @@ static const TypeInfo conventional_pci_interface_info = {
     .parent        = TYPE_INTERFACE,
 };
 
-static bool pciebus_allows_extended_config_space(PCIBus *bus)
-{
-    return true;
-}
-
 static void pcie_bus_class_init(ObjectClass *klass, void *data)
 {
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
+    BusClass *k = BUS_CLASS(klass);
 
-    pbc->allows_extended_config_space = pciebus_allows_extended_config_space;
+    k->realize = pcie_bus_realize;
 }
 
 static const TypeInfo pcie_bus_info = {
@@ -410,11 +420,6 @@ bool pci_bus_is_express(PCIBus *bus)
     return object_dynamic_cast(OBJECT(bus), TYPE_PCIE_BUS);
 }
 
-bool pci_bus_allows_extended_config_space(PCIBus *bus)
-{
-    return PCI_BUS_GET_CLASS(bus)->allows_extended_config_space(bus);
-}
-
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
                               MemoryRegion *address_space_mem,
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 9d64b2e12f..5f3497256c 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -53,16 +53,9 @@ static inline PCIDevice *pci_dev_find_by_addr(PCIBus *bus, uint32_t addr)
 
 static void pci_adjust_config_limit(PCIBus *bus, uint32_t *limit)
 {
-    if (*limit > PCI_CONFIG_SPACE_SIZE) {
-        if (!pci_bus_allows_extended_config_space(bus)) {
-            *limit = PCI_CONFIG_SPACE_SIZE;
-            return;
-        }
-
-        if (!pci_bus_is_root(bus)) {
-            PCIDevice *bridge = pci_bridge_get_device(bus);
-            pci_adjust_config_limit(pci_get_bus(bridge), limit);
-        }
+    if ((*limit > PCI_CONFIG_SPACE_SIZE) &&
+        !pci_bus_allows_extended_config_space(bus)) {
+        *limit = PCI_CONFIG_SPACE_SIZE;
     }
 }
 
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 97961b0128..9cf2c41b8c 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1626,28 +1626,6 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
     memory_region_del_subregion(get_system_memory(), &sphb->mem32window);
 }
 
-static bool spapr_phb_allows_extended_config_space(PCIBus *bus)
-{
-    SpaprPhbState *sphb = SPAPR_PCI_HOST_BRIDGE(BUS(bus)->parent);
-
-    return sphb->pcie_ecs;
-}
-
-static void spapr_phb_root_bus_class_init(ObjectClass *klass, void *data)
-{
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
-
-    pbc->allows_extended_config_space = spapr_phb_allows_extended_config_space;
-}
-
-#define TYPE_SPAPR_PHB_ROOT_BUS "pci"
-
-static const TypeInfo spapr_phb_root_bus_info = {
-    .name = TYPE_SPAPR_PHB_ROOT_BUS,
-    .parent = TYPE_PCI_BUS,
-    .class_init = spapr_phb_root_bus_class_init,
-};
-
 static void spapr_phb_realize(DeviceState *dev, Error **errp)
 {
     /* We don't use SPAPR_MACHINE() in order to exit gracefully if the user
@@ -1753,7 +1731,16 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
                                 pci_spapr_set_irq, pci_swizzle_map_irq_fn, sphb,
                                 &sphb->memspace, &sphb->iospace,
                                 PCI_DEVFN(0, 0), PCI_NUM_PINS,
-                                TYPE_SPAPR_PHB_ROOT_BUS);
+                                TYPE_PCI_BUS);
+
+    /*
+     * Despite resembling a vanilla PCI bus in most ways, the PAPR
+     * para-virtualized PCI bus *does* permit PCI-E extended config
+     * space access
+     */
+    if (sphb->pcie_ecs) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    }
     phb->bus = bus;
     qbus_set_hotplug_handler(BUS(phb->bus), OBJECT(sphb), NULL);
 
@@ -2348,7 +2335,6 @@ void spapr_pci_rtas_init(void)
 static void spapr_pci_register_types(void)
 {
     type_register_static(&spapr_phb_info);
-    type_register_static(&spapr_phb_root_bus_info);
 }
 
 type_init(spapr_pci_register_types)
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index edf44de21d..da20c915ef 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -395,7 +395,6 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
 #define TYPE_PCIE_BUS "PCIE"
 
 bool pci_bus_is_express(PCIBus *bus);
-bool pci_bus_allows_extended_config_space(PCIBus *bus);
 
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index aea98d5040..0714f578af 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -17,12 +17,13 @@ typedef struct PCIBusClass {
 
     int (*bus_num)(PCIBus *bus);
     uint16_t (*numa_node)(PCIBus *bus);
-    bool (*allows_extended_config_space)(PCIBus *bus);
 } PCIBusClass;
 
 enum PCIBusFlags {
     /* This bus is the root of a PCI domain */
     PCI_BUS_IS_ROOT                                         = 0x0001,
+    /* PCIe extended configuration space is accessible on this bus */
+    PCI_BUS_EXTENDED_CONFIG_SPACE                           = 0x0002,
 };
 
 struct PCIBus {
@@ -57,4 +58,9 @@ static inline bool pci_bus_is_root(PCIBus *bus)
     return !!(bus->flags & PCI_BUS_IS_ROOT);
 }
 
+static inline bool pci_bus_allows_extended_config_space(PCIBus *bus)
+{
+    return !!(bus->flags & PCI_BUS_EXTENDED_CONFIG_SPACE);
+}
+
 #endif /* QEMU_PCI_BUS_H */
-- 
2.21.0

[Qemu-devel] [PULL 04/10] pcie: Simplify pci_adjust_config_limit()

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

Since c2077e2c "pci: Adjust PCI config limit based on bus topology",
pci_adjust_config_limit() has been used in the config space read and write
paths to only permit access to extended config space on buses which permit
it.  Specifically it prevents access on devices below a vanilla-PCI bus via
some combination of bridges, even if both the host bridge and the device
itself are PCI-E.

It accomplishes this with a somewhat complex call up the chain of bridges
to see if any of them prohibit extended config space access.  This is
overly complex, since we can always know if the bus will support such
access at the point it is constructed.

This patch simplifies the test by using a flag in the PCIBus instance
indicating whether extended configuration space is accessible.  It is
false for vanilla PCI buses.  For PCI-E buses, it is true for root
buses and equal to the parent bus's's capability otherwise.

For the special case of sPAPR's paravirtualized PCI root bus, which
acts mostly like vanilla PCI, but does allow extended config space
access, we override the default value of the flag from the host bridge
code.

This should cause no behavioural change.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-4-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h     |  1 -
 include/hw/pci/pci_bus.h |  8 +++++++-
 hw/pci/pci.c             | 41 ++++++++++++++++++++++------------------
 hw/pci/pci_host.c        | 13 +++----------
 hw/ppc/spapr_pci.c       | 34 ++++++++++-----------------------
 5 files changed, 43 insertions(+), 54 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index edf44de21d..da20c915ef 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -395,7 +395,6 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
 #define TYPE_PCIE_BUS "PCIE"
 
 bool pci_bus_is_express(PCIBus *bus);
-bool pci_bus_allows_extended_config_space(PCIBus *bus);
 
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index aea98d5040..0714f578af 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -17,12 +17,13 @@ typedef struct PCIBusClass {
 
     int (*bus_num)(PCIBus *bus);
     uint16_t (*numa_node)(PCIBus *bus);
-    bool (*allows_extended_config_space)(PCIBus *bus);
 } PCIBusClass;
 
 enum PCIBusFlags {
     /* This bus is the root of a PCI domain */
     PCI_BUS_IS_ROOT                                         = 0x0001,
+    /* PCIe extended configuration space is accessible on this bus */
+    PCI_BUS_EXTENDED_CONFIG_SPACE                           = 0x0002,
 };
 
 struct PCIBus {
@@ -57,4 +58,9 @@ static inline bool pci_bus_is_root(PCIBus *bus)
     return !!(bus->flags & PCI_BUS_IS_ROOT);
 }
 
+static inline bool pci_bus_allows_extended_config_space(PCIBus *bus)
+{
+    return !!(bus->flags & PCI_BUS_EXTENDED_CONFIG_SPACE);
+}
+
 #endif /* QEMU_PCI_BUS_H */
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index b386777045..7e5f8d001b 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -120,6 +120,27 @@ static void pci_bus_realize(BusState *qbus, Error **errp)
     vmstate_register(NULL, -1, &vmstate_pcibus, bus);
 }
 
+static void pcie_bus_realize(BusState *qbus, Error **errp)
+{
+    PCIBus *bus = PCI_BUS(qbus);
+
+    pci_bus_realize(qbus, errp);
+
+    /*
+     * A PCI-E bus can support extended config space if it's the root
+     * bus, or if the bus/bridge above it does as well
+     */
+    if (pci_bus_is_root(bus)) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    } else {
+        PCIBus *parent_bus = pci_get_bus(bus->parent_dev);
+
+        if (pci_bus_allows_extended_config_space(parent_bus)) {
+            bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+        }
+    }
+}
+
 static void pci_bus_unrealize(BusState *qbus, Error **errp)
 {
     PCIBus *bus = PCI_BUS(qbus);
@@ -142,11 +163,6 @@ static uint16_t pcibus_numa_node(PCIBus *bus)
     return NUMA_NODE_UNASSIGNED;
 }
 
-static bool pcibus_allows_extended_config_space(PCIBus *bus)
-{
-    return false;
-}
-
 static void pci_bus_class_init(ObjectClass *klass, void *data)
 {
     BusClass *k = BUS_CLASS(klass);
@@ -161,7 +177,6 @@ static void pci_bus_class_init(ObjectClass *klass, void *data)
 
     pbc->bus_num = pcibus_num;
     pbc->numa_node = pcibus_numa_node;
-    pbc->allows_extended_config_space = pcibus_allows_extended_config_space;
 }
 
 static const TypeInfo pci_bus_info = {
@@ -182,16 +197,11 @@ static const TypeInfo conventional_pci_interface_info = {
     .parent        = TYPE_INTERFACE,
 };
 
-static bool pciebus_allows_extended_config_space(PCIBus *bus)
-{
-    return true;
-}
-
 static void pcie_bus_class_init(ObjectClass *klass, void *data)
 {
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
+    BusClass *k = BUS_CLASS(klass);
 
-    pbc->allows_extended_config_space = pciebus_allows_extended_config_space;
+    k->realize = pcie_bus_realize;
 }
 
 static const TypeInfo pcie_bus_info = {
@@ -410,11 +420,6 @@ bool pci_bus_is_express(PCIBus *bus)
     return object_dynamic_cast(OBJECT(bus), TYPE_PCIE_BUS);
 }
 
-bool pci_bus_allows_extended_config_space(PCIBus *bus)
-{
-    return PCI_BUS_GET_CLASS(bus)->allows_extended_config_space(bus);
-}
-
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
                               MemoryRegion *address_space_mem,
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 9d64b2e12f..5f3497256c 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -53,16 +53,9 @@ static inline PCIDevice *pci_dev_find_by_addr(PCIBus *bus, uint32_t addr)
 
 static void pci_adjust_config_limit(PCIBus *bus, uint32_t *limit)
 {
-    if (*limit > PCI_CONFIG_SPACE_SIZE) {
-        if (!pci_bus_allows_extended_config_space(bus)) {
-            *limit = PCI_CONFIG_SPACE_SIZE;
-            return;
-        }
-
-        if (!pci_bus_is_root(bus)) {
-            PCIDevice *bridge = pci_bridge_get_device(bus);
-            pci_adjust_config_limit(pci_get_bus(bridge), limit);
-        }
+    if ((*limit > PCI_CONFIG_SPACE_SIZE) &&
+        !pci_bus_allows_extended_config_space(bus)) {
+        *limit = PCI_CONFIG_SPACE_SIZE;
     }
 }
 
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 97961b0128..9cf2c41b8c 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1626,28 +1626,6 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
     memory_region_del_subregion(get_system_memory(), &sphb->mem32window);
 }
 
-static bool spapr_phb_allows_extended_config_space(PCIBus *bus)
-{
-    SpaprPhbState *sphb = SPAPR_PCI_HOST_BRIDGE(BUS(bus)->parent);
-
-    return sphb->pcie_ecs;
-}
-
-static void spapr_phb_root_bus_class_init(ObjectClass *klass, void *data)
-{
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
-
-    pbc->allows_extended_config_space = spapr_phb_allows_extended_config_space;
-}
-
-#define TYPE_SPAPR_PHB_ROOT_BUS "pci"
-
-static const TypeInfo spapr_phb_root_bus_info = {
-    .name = TYPE_SPAPR_PHB_ROOT_BUS,
-    .parent = TYPE_PCI_BUS,
-    .class_init = spapr_phb_root_bus_class_init,
-};
-
 static void spapr_phb_realize(DeviceState *dev, Error **errp)
 {
     /* We don't use SPAPR_MACHINE() in order to exit gracefully if the user
@@ -1753,7 +1731,16 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
                                 pci_spapr_set_irq, pci_swizzle_map_irq_fn, sphb,
                                 &sphb->memspace, &sphb->iospace,
                                 PCI_DEVFN(0, 0), PCI_NUM_PINS,
-                                TYPE_SPAPR_PHB_ROOT_BUS);
+                                TYPE_PCI_BUS);
+
+    /*
+     * Despite resembling a vanilla PCI bus in most ways, the PAPR
+     * para-virtualized PCI bus *does* permit PCI-E extended config
+     * space access
+     */
+    if (sphb->pcie_ecs) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    }
     phb->bus = bus;
     qbus_set_hotplug_handler(BUS(phb->bus), OBJECT(sphb), NULL);
 
@@ -2348,7 +2335,6 @@ void spapr_pci_rtas_init(void)
 static void spapr_pci_register_types(void)
 {
     type_register_static(&spapr_phb_info);
-    type_register_static(&spapr_phb_root_bus_info);
 }
 
 type_init(spapr_pci_register_types)
-- 
MST

[Qemu-devel] [PULL v2 03/14] pcie: Simplify pci_adjust_config_limit()

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

Since c2077e2c "pci: Adjust PCI config limit based on bus topology",
pci_adjust_config_limit() has been used in the config space read and write
paths to only permit access to extended config space on buses which permit
it.  Specifically it prevents access on devices below a vanilla-PCI bus via
some combination of bridges, even if both the host bridge and the device
itself are PCI-E.

It accomplishes this with a somewhat complex call up the chain of bridges
to see if any of them prohibit extended config space access.  This is
overly complex, since we can always know if the bus will support such
access at the point it is constructed.

This patch simplifies the test by using a flag in the PCIBus instance
indicating whether extended configuration space is accessible.  It is
false for vanilla PCI buses.  For PCI-E buses, it is true for root
buses and equal to the parent bus's's capability otherwise.

For the special case of sPAPR's paravirtualized PCI root bus, which
acts mostly like vanilla PCI, but does allow extended config space
access, we override the default value of the flag from the host bridge
code.

This should cause no behavioural change.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-4-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h     |  1 -
 include/hw/pci/pci_bus.h |  8 +++++++-
 hw/pci/pci.c             | 41 ++++++++++++++++++++++------------------
 hw/pci/pci_host.c        | 13 +++----------
 hw/ppc/spapr_pci.c       | 34 ++++++++++-----------------------
 5 files changed, 43 insertions(+), 54 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index edf44de21d..da20c915ef 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -395,7 +395,6 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
 #define TYPE_PCIE_BUS "PCIE"
 
 bool pci_bus_is_express(PCIBus *bus);
-bool pci_bus_allows_extended_config_space(PCIBus *bus);
 
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index aea98d5040..0714f578af 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -17,12 +17,13 @@ typedef struct PCIBusClass {
 
     int (*bus_num)(PCIBus *bus);
     uint16_t (*numa_node)(PCIBus *bus);
-    bool (*allows_extended_config_space)(PCIBus *bus);
 } PCIBusClass;
 
 enum PCIBusFlags {
     /* This bus is the root of a PCI domain */
     PCI_BUS_IS_ROOT                                         = 0x0001,
+    /* PCIe extended configuration space is accessible on this bus */
+    PCI_BUS_EXTENDED_CONFIG_SPACE                           = 0x0002,
 };
 
 struct PCIBus {
@@ -57,4 +58,9 @@ static inline bool pci_bus_is_root(PCIBus *bus)
     return !!(bus->flags & PCI_BUS_IS_ROOT);
 }
 
+static inline bool pci_bus_allows_extended_config_space(PCIBus *bus)
+{
+    return !!(bus->flags & PCI_BUS_EXTENDED_CONFIG_SPACE);
+}
+
 #endif /* QEMU_PCI_BUS_H */
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index b386777045..7e5f8d001b 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -120,6 +120,27 @@ static void pci_bus_realize(BusState *qbus, Error **errp)
     vmstate_register(NULL, -1, &vmstate_pcibus, bus);
 }
 
+static void pcie_bus_realize(BusState *qbus, Error **errp)
+{
+    PCIBus *bus = PCI_BUS(qbus);
+
+    pci_bus_realize(qbus, errp);
+
+    /*
+     * A PCI-E bus can support extended config space if it's the root
+     * bus, or if the bus/bridge above it does as well
+     */
+    if (pci_bus_is_root(bus)) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    } else {
+        PCIBus *parent_bus = pci_get_bus(bus->parent_dev);
+
+        if (pci_bus_allows_extended_config_space(parent_bus)) {
+            bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+        }
+    }
+}
+
 static void pci_bus_unrealize(BusState *qbus, Error **errp)
 {
     PCIBus *bus = PCI_BUS(qbus);
@@ -142,11 +163,6 @@ static uint16_t pcibus_numa_node(PCIBus *bus)
     return NUMA_NODE_UNASSIGNED;
 }
 
-static bool pcibus_allows_extended_config_space(PCIBus *bus)
-{
-    return false;
-}
-
 static void pci_bus_class_init(ObjectClass *klass, void *data)
 {
     BusClass *k = BUS_CLASS(klass);
@@ -161,7 +177,6 @@ static void pci_bus_class_init(ObjectClass *klass, void *data)
 
     pbc->bus_num = pcibus_num;
     pbc->numa_node = pcibus_numa_node;
-    pbc->allows_extended_config_space = pcibus_allows_extended_config_space;
 }
 
 static const TypeInfo pci_bus_info = {
@@ -182,16 +197,11 @@ static const TypeInfo conventional_pci_interface_info = {
     .parent        = TYPE_INTERFACE,
 };
 
-static bool pciebus_allows_extended_config_space(PCIBus *bus)
-{
-    return true;
-}
-
 static void pcie_bus_class_init(ObjectClass *klass, void *data)
 {
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
+    BusClass *k = BUS_CLASS(klass);
 
-    pbc->allows_extended_config_space = pciebus_allows_extended_config_space;
+    k->realize = pcie_bus_realize;
 }
 
 static const TypeInfo pcie_bus_info = {
@@ -410,11 +420,6 @@ bool pci_bus_is_express(PCIBus *bus)
     return object_dynamic_cast(OBJECT(bus), TYPE_PCIE_BUS);
 }
 
-bool pci_bus_allows_extended_config_space(PCIBus *bus)
-{
-    return PCI_BUS_GET_CLASS(bus)->allows_extended_config_space(bus);
-}
-
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
                               MemoryRegion *address_space_mem,
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 9d64b2e12f..5f3497256c 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -53,16 +53,9 @@ static inline PCIDevice *pci_dev_find_by_addr(PCIBus *bus, uint32_t addr)
 
 static void pci_adjust_config_limit(PCIBus *bus, uint32_t *limit)
 {
-    if (*limit > PCI_CONFIG_SPACE_SIZE) {
-        if (!pci_bus_allows_extended_config_space(bus)) {
-            *limit = PCI_CONFIG_SPACE_SIZE;
-            return;
-        }
-
-        if (!pci_bus_is_root(bus)) {
-            PCIDevice *bridge = pci_bridge_get_device(bus);
-            pci_adjust_config_limit(pci_get_bus(bridge), limit);
-        }
+    if ((*limit > PCI_CONFIG_SPACE_SIZE) &&
+        !pci_bus_allows_extended_config_space(bus)) {
+        *limit = PCI_CONFIG_SPACE_SIZE;
     }
 }
 
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 97961b0128..9cf2c41b8c 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1626,28 +1626,6 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
     memory_region_del_subregion(get_system_memory(), &sphb->mem32window);
 }
 
-static bool spapr_phb_allows_extended_config_space(PCIBus *bus)
-{
-    SpaprPhbState *sphb = SPAPR_PCI_HOST_BRIDGE(BUS(bus)->parent);
-
-    return sphb->pcie_ecs;
-}
-
-static void spapr_phb_root_bus_class_init(ObjectClass *klass, void *data)
-{
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
-
-    pbc->allows_extended_config_space = spapr_phb_allows_extended_config_space;
-}
-
-#define TYPE_SPAPR_PHB_ROOT_BUS "pci"
-
-static const TypeInfo spapr_phb_root_bus_info = {
-    .name = TYPE_SPAPR_PHB_ROOT_BUS,
-    .parent = TYPE_PCI_BUS,
-    .class_init = spapr_phb_root_bus_class_init,
-};
-
 static void spapr_phb_realize(DeviceState *dev, Error **errp)
 {
     /* We don't use SPAPR_MACHINE() in order to exit gracefully if the user
@@ -1753,7 +1731,16 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
                                 pci_spapr_set_irq, pci_swizzle_map_irq_fn, sphb,
                                 &sphb->memspace, &sphb->iospace,
                                 PCI_DEVFN(0, 0), PCI_NUM_PINS,
-                                TYPE_SPAPR_PHB_ROOT_BUS);
+                                TYPE_PCI_BUS);
+
+    /*
+     * Despite resembling a vanilla PCI bus in most ways, the PAPR
+     * para-virtualized PCI bus *does* permit PCI-E extended config
+     * space access
+     */
+    if (sphb->pcie_ecs) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    }
     phb->bus = bus;
     qbus_set_hotplug_handler(BUS(phb->bus), OBJECT(sphb), NULL);
 
@@ -2348,7 +2335,6 @@ void spapr_pci_rtas_init(void)
 static void spapr_pci_register_types(void)
 {
     type_register_static(&spapr_phb_info);
-    type_register_static(&spapr_phb_root_bus_info);
 }
 
 type_init(spapr_pci_register_types)
-- 
MST

[Qemu-devel] [PULL v3 03/17] pcie: Simplify pci_adjust_config_limit()

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

Since c2077e2c "pci: Adjust PCI config limit based on bus topology",
pci_adjust_config_limit() has been used in the config space read and write
paths to only permit access to extended config space on buses which permit
it.  Specifically it prevents access on devices below a vanilla-PCI bus via
some combination of bridges, even if both the host bridge and the device
itself are PCI-E.

It accomplishes this with a somewhat complex call up the chain of bridges
to see if any of them prohibit extended config space access.  This is
overly complex, since we can always know if the bus will support such
access at the point it is constructed.

This patch simplifies the test by using a flag in the PCIBus instance
indicating whether extended configuration space is accessible.  It is
false for vanilla PCI buses.  For PCI-E buses, it is true for root
buses and equal to the parent bus's's capability otherwise.

For the special case of sPAPR's paravirtualized PCI root bus, which
acts mostly like vanilla PCI, but does allow extended config space
access, we override the default value of the flag from the host bridge
code.

This should cause no behavioural change.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-4-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h     |  1 -
 include/hw/pci/pci_bus.h |  8 +++++++-
 hw/pci/pci.c             | 41 ++++++++++++++++++++++------------------
 hw/pci/pci_host.c        | 13 +++----------
 hw/ppc/spapr_pci.c       | 34 ++++++++++-----------------------
 5 files changed, 43 insertions(+), 54 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index edf44de21d..da20c915ef 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -395,7 +395,6 @@ typedef PCIINTxRoute (*pci_route_irq_fn)(void *opaque, int pin);
 #define TYPE_PCIE_BUS "PCIE"
 
 bool pci_bus_is_express(PCIBus *bus);
-bool pci_bus_allows_extended_config_space(PCIBus *bus);
 
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
index aea98d5040..0714f578af 100644
--- a/include/hw/pci/pci_bus.h
+++ b/include/hw/pci/pci_bus.h
@@ -17,12 +17,13 @@ typedef struct PCIBusClass {
 
     int (*bus_num)(PCIBus *bus);
     uint16_t (*numa_node)(PCIBus *bus);
-    bool (*allows_extended_config_space)(PCIBus *bus);
 } PCIBusClass;
 
 enum PCIBusFlags {
     /* This bus is the root of a PCI domain */
     PCI_BUS_IS_ROOT                                         = 0x0001,
+    /* PCIe extended configuration space is accessible on this bus */
+    PCI_BUS_EXTENDED_CONFIG_SPACE                           = 0x0002,
 };
 
 struct PCIBus {
@@ -57,4 +58,9 @@ static inline bool pci_bus_is_root(PCIBus *bus)
     return !!(bus->flags & PCI_BUS_IS_ROOT);
 }
 
+static inline bool pci_bus_allows_extended_config_space(PCIBus *bus)
+{
+    return !!(bus->flags & PCI_BUS_EXTENDED_CONFIG_SPACE);
+}
+
 #endif /* QEMU_PCI_BUS_H */
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index b386777045..7e5f8d001b 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -120,6 +120,27 @@ static void pci_bus_realize(BusState *qbus, Error **errp)
     vmstate_register(NULL, -1, &vmstate_pcibus, bus);
 }
 
+static void pcie_bus_realize(BusState *qbus, Error **errp)
+{
+    PCIBus *bus = PCI_BUS(qbus);
+
+    pci_bus_realize(qbus, errp);
+
+    /*
+     * A PCI-E bus can support extended config space if it's the root
+     * bus, or if the bus/bridge above it does as well
+     */
+    if (pci_bus_is_root(bus)) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    } else {
+        PCIBus *parent_bus = pci_get_bus(bus->parent_dev);
+
+        if (pci_bus_allows_extended_config_space(parent_bus)) {
+            bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+        }
+    }
+}
+
 static void pci_bus_unrealize(BusState *qbus, Error **errp)
 {
     PCIBus *bus = PCI_BUS(qbus);
@@ -142,11 +163,6 @@ static uint16_t pcibus_numa_node(PCIBus *bus)
     return NUMA_NODE_UNASSIGNED;
 }
 
-static bool pcibus_allows_extended_config_space(PCIBus *bus)
-{
-    return false;
-}
-
 static void pci_bus_class_init(ObjectClass *klass, void *data)
 {
     BusClass *k = BUS_CLASS(klass);
@@ -161,7 +177,6 @@ static void pci_bus_class_init(ObjectClass *klass, void *data)
 
     pbc->bus_num = pcibus_num;
     pbc->numa_node = pcibus_numa_node;
-    pbc->allows_extended_config_space = pcibus_allows_extended_config_space;
 }
 
 static const TypeInfo pci_bus_info = {
@@ -182,16 +197,11 @@ static const TypeInfo conventional_pci_interface_info = {
     .parent        = TYPE_INTERFACE,
 };
 
-static bool pciebus_allows_extended_config_space(PCIBus *bus)
-{
-    return true;
-}
-
 static void pcie_bus_class_init(ObjectClass *klass, void *data)
 {
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
+    BusClass *k = BUS_CLASS(klass);
 
-    pbc->allows_extended_config_space = pciebus_allows_extended_config_space;
+    k->realize = pcie_bus_realize;
 }
 
 static const TypeInfo pcie_bus_info = {
@@ -410,11 +420,6 @@ bool pci_bus_is_express(PCIBus *bus)
     return object_dynamic_cast(OBJECT(bus), TYPE_PCIE_BUS);
 }
 
-bool pci_bus_allows_extended_config_space(PCIBus *bus)
-{
-    return PCI_BUS_GET_CLASS(bus)->allows_extended_config_space(bus);
-}
-
 void pci_root_bus_new_inplace(PCIBus *bus, size_t bus_size, DeviceState *parent,
                               const char *name,
                               MemoryRegion *address_space_mem,
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 9d64b2e12f..5f3497256c 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -53,16 +53,9 @@ static inline PCIDevice *pci_dev_find_by_addr(PCIBus *bus, uint32_t addr)
 
 static void pci_adjust_config_limit(PCIBus *bus, uint32_t *limit)
 {
-    if (*limit > PCI_CONFIG_SPACE_SIZE) {
-        if (!pci_bus_allows_extended_config_space(bus)) {
-            *limit = PCI_CONFIG_SPACE_SIZE;
-            return;
-        }
-
-        if (!pci_bus_is_root(bus)) {
-            PCIDevice *bridge = pci_bridge_get_device(bus);
-            pci_adjust_config_limit(pci_get_bus(bridge), limit);
-        }
+    if ((*limit > PCI_CONFIG_SPACE_SIZE) &&
+        !pci_bus_allows_extended_config_space(bus)) {
+        *limit = PCI_CONFIG_SPACE_SIZE;
     }
 }
 
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 97961b0128..9cf2c41b8c 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1626,28 +1626,6 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
     memory_region_del_subregion(get_system_memory(), &sphb->mem32window);
 }
 
-static bool spapr_phb_allows_extended_config_space(PCIBus *bus)
-{
-    SpaprPhbState *sphb = SPAPR_PCI_HOST_BRIDGE(BUS(bus)->parent);
-
-    return sphb->pcie_ecs;
-}
-
-static void spapr_phb_root_bus_class_init(ObjectClass *klass, void *data)
-{
-    PCIBusClass *pbc = PCI_BUS_CLASS(klass);
-
-    pbc->allows_extended_config_space = spapr_phb_allows_extended_config_space;
-}
-
-#define TYPE_SPAPR_PHB_ROOT_BUS "pci"
-
-static const TypeInfo spapr_phb_root_bus_info = {
-    .name = TYPE_SPAPR_PHB_ROOT_BUS,
-    .parent = TYPE_PCI_BUS,
-    .class_init = spapr_phb_root_bus_class_init,
-};
-
 static void spapr_phb_realize(DeviceState *dev, Error **errp)
 {
     /* We don't use SPAPR_MACHINE() in order to exit gracefully if the user
@@ -1753,7 +1731,16 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
                                 pci_spapr_set_irq, pci_swizzle_map_irq_fn, sphb,
                                 &sphb->memspace, &sphb->iospace,
                                 PCI_DEVFN(0, 0), PCI_NUM_PINS,
-                                TYPE_SPAPR_PHB_ROOT_BUS);
+                                TYPE_PCI_BUS);
+
+    /*
+     * Despite resembling a vanilla PCI bus in most ways, the PAPR
+     * para-virtualized PCI bus *does* permit PCI-E extended config
+     * space access
+     */
+    if (sphb->pcie_ecs) {
+        bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
+    }
     phb->bus = bus;
     qbus_set_hotplug_handler(BUS(phb->bus), OBJECT(sphb), NULL);
 
@@ -2348,7 +2335,6 @@ void spapr_pci_rtas_init(void)
 static void spapr_pci_register_types(void)
 {
     type_register_static(&spapr_phb_info);
-    type_register_static(&spapr_phb_root_bus_info);
 }
 
 type_init(spapr_pci_register_types)
-- 
MST

[Qemu-devel] [PATCH v4 4/5] pci: Make is_bridge a bool

[David Gibson]

The is_bridge field in PCIDevice acts as a bool, but is declared as an int.
Declare it as a bool for clarity, and change everything that writes it to
use true/false instead of 0/1 to match.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci-bridge/dec.c                | 4 ++--
 hw/pci-bridge/i82801b11.c          | 2 +-
 hw/pci-bridge/pci_bridge_dev.c     | 2 +-
 hw/pci-bridge/pcie_pci_bridge.c    | 2 +-
 hw/pci-bridge/pcie_root_port.c     | 2 +-
 hw/pci-bridge/simba.c              | 2 +-
 hw/pci-bridge/xio3130_downstream.c | 2 +-
 hw/pci-bridge/xio3130_upstream.c   | 2 +-
 include/hw/pci/pci.h               | 2 +-
 9 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/hw/pci-bridge/dec.c b/hw/pci-bridge/dec.c
index 8484bfd434..ca40253730 100644
--- a/hw/pci-bridge/dec.c
+++ b/hw/pci-bridge/dec.c
@@ -68,7 +68,7 @@ static void dec_21154_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_DEC;
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     dc->desc = "DEC 21154 PCI-PCI bridge";
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
@@ -129,7 +129,7 @@ static void dec_21154_pci_host_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->revision = 0x02;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     /*
      * PCI-facing part of the host bridge, not usable without the
      * host-facing part, which can't be device_add'ed, yet.
diff --git a/hw/pci-bridge/i82801b11.c b/hw/pci-bridge/i82801b11.c
index 10e590e5c6..6d8b0f54a7 100644
--- a/hw/pci-bridge/i82801b11.c
+++ b/hw/pci-bridge/i82801b11.c
@@ -90,7 +90,7 @@ static void i82801b11_bridge_class_init(ObjectClass *klass, void *data)
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82801BA_11;
     k->revision = ICH9_D2P_A2_REVISION;
diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
index ff6b8323da..c56ed1f52f 100644
--- a/hw/pci-bridge/pci_bridge_dev.c
+++ b/hw/pci-bridge/pci_bridge_dev.c
@@ -253,7 +253,7 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_BRIDGE;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1,
+    k->is_bridge = true;
     dc->desc = "Standard PCI Bridge";
     dc->reset = qdev_pci_bridge_dev_reset;
     dc->props = pci_bridge_dev_properties;
diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index d491b40d04..9a4fba413a 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -143,7 +143,7 @@ static void pcie_pci_bridge_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE;
     k->realize = pcie_pci_bridge_realize;
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index e94d918b6d..be3f4d5e03 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -162,7 +162,7 @@ static void rp_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = rp_write_config;
     k->realize = rp_realize;
     k->exit = rp_exit;
diff --git a/hw/pci-bridge/simba.c b/hw/pci-bridge/simba.c
index dea4c8c5e7..7cf0d6e047 100644
--- a/hw/pci-bridge/simba.c
+++ b/hw/pci-bridge/simba.c
@@ -76,7 +76,7 @@ static void simba_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
     k->revision = 0x11;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
diff --git a/hw/pci-bridge/xio3130_downstream.c b/hw/pci-bridge/xio3130_downstream.c
index 467bbabe4c..ab2a51e15d 100644
--- a/hw/pci-bridge/xio3130_downstream.c
+++ b/hw/pci-bridge/xio3130_downstream.c
@@ -152,7 +152,7 @@ static void xio3130_downstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_downstream_write_config;
     k->realize = xio3130_downstream_realize;
     k->exit = xio3130_downstream_exitfn;
diff --git a/hw/pci-bridge/xio3130_upstream.c b/hw/pci-bridge/xio3130_upstream.c
index b524908cf1..1d41a49ab0 100644
--- a/hw/pci-bridge/xio3130_upstream.c
+++ b/hw/pci-bridge/xio3130_upstream.c
@@ -126,7 +126,7 @@ static void xio3130_upstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_upstream_write_config;
     k->realize = xio3130_upstream_realize;
     k->exit = xio3130_upstream_exitfn;
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index da20c915ef..d082707dfa 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -234,7 +234,7 @@ typedef struct PCIDeviceClass {
      * This doesn't mean pci host switch.
      * When card bus bridge is supported, this would be enhanced.
      */
-    int is_bridge;
+    bool is_bridge;
 
     /* rom bar */
     const char *romfile;
-- 
2.21.0

[Qemu-devel] [PULL 05/10] pci: Make is_bridge a bool

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

The is_bridge field in PCIDevice acts as a bool, but is declared as an int.
Declare it as a bool for clarity, and change everything that writes it to
use true/false instead of 0/1 to match.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-5-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h               | 2 +-
 hw/pci-bridge/dec.c                | 4 ++--
 hw/pci-bridge/i82801b11.c          | 2 +-
 hw/pci-bridge/pci_bridge_dev.c     | 2 +-
 hw/pci-bridge/pcie_pci_bridge.c    | 2 +-
 hw/pci-bridge/pcie_root_port.c     | 2 +-
 hw/pci-bridge/simba.c              | 2 +-
 hw/pci-bridge/xio3130_downstream.c | 2 +-
 hw/pci-bridge/xio3130_upstream.c   | 2 +-
 9 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index da20c915ef..d082707dfa 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -234,7 +234,7 @@ typedef struct PCIDeviceClass {
      * This doesn't mean pci host switch.
      * When card bus bridge is supported, this would be enhanced.
      */
-    int is_bridge;
+    bool is_bridge;
 
     /* rom bar */
     const char *romfile;
diff --git a/hw/pci-bridge/dec.c b/hw/pci-bridge/dec.c
index 8484bfd434..ca40253730 100644
--- a/hw/pci-bridge/dec.c
+++ b/hw/pci-bridge/dec.c
@@ -68,7 +68,7 @@ static void dec_21154_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_DEC;
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     dc->desc = "DEC 21154 PCI-PCI bridge";
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
@@ -129,7 +129,7 @@ static void dec_21154_pci_host_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->revision = 0x02;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     /*
      * PCI-facing part of the host bridge, not usable without the
      * host-facing part, which can't be device_add'ed, yet.
diff --git a/hw/pci-bridge/i82801b11.c b/hw/pci-bridge/i82801b11.c
index 10e590e5c6..6d8b0f54a7 100644
--- a/hw/pci-bridge/i82801b11.c
+++ b/hw/pci-bridge/i82801b11.c
@@ -90,7 +90,7 @@ static void i82801b11_bridge_class_init(ObjectClass *klass, void *data)
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82801BA_11;
     k->revision = ICH9_D2P_A2_REVISION;
diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
index ff6b8323da..c56ed1f52f 100644
--- a/hw/pci-bridge/pci_bridge_dev.c
+++ b/hw/pci-bridge/pci_bridge_dev.c
@@ -253,7 +253,7 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_BRIDGE;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1,
+    k->is_bridge = true;
     dc->desc = "Standard PCI Bridge";
     dc->reset = qdev_pci_bridge_dev_reset;
     dc->props = pci_bridge_dev_properties;
diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index d491b40d04..9a4fba413a 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -143,7 +143,7 @@ static void pcie_pci_bridge_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE;
     k->realize = pcie_pci_bridge_realize;
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index e94d918b6d..be3f4d5e03 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -162,7 +162,7 @@ static void rp_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = rp_write_config;
     k->realize = rp_realize;
     k->exit = rp_exit;
diff --git a/hw/pci-bridge/simba.c b/hw/pci-bridge/simba.c
index dea4c8c5e7..7cf0d6e047 100644
--- a/hw/pci-bridge/simba.c
+++ b/hw/pci-bridge/simba.c
@@ -76,7 +76,7 @@ static void simba_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
     k->revision = 0x11;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
diff --git a/hw/pci-bridge/xio3130_downstream.c b/hw/pci-bridge/xio3130_downstream.c
index 467bbabe4c..ab2a51e15d 100644
--- a/hw/pci-bridge/xio3130_downstream.c
+++ b/hw/pci-bridge/xio3130_downstream.c
@@ -152,7 +152,7 @@ static void xio3130_downstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_downstream_write_config;
     k->realize = xio3130_downstream_realize;
     k->exit = xio3130_downstream_exitfn;
diff --git a/hw/pci-bridge/xio3130_upstream.c b/hw/pci-bridge/xio3130_upstream.c
index b524908cf1..1d41a49ab0 100644
--- a/hw/pci-bridge/xio3130_upstream.c
+++ b/hw/pci-bridge/xio3130_upstream.c
@@ -126,7 +126,7 @@ static void xio3130_upstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_upstream_write_config;
     k->realize = xio3130_upstream_realize;
     k->exit = xio3130_upstream_exitfn;
-- 
MST

[Qemu-devel] [PULL v2 04/14] pci: Make is_bridge a bool

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

The is_bridge field in PCIDevice acts as a bool, but is declared as an int.
Declare it as a bool for clarity, and change everything that writes it to
use true/false instead of 0/1 to match.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-5-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h               | 2 +-
 hw/pci-bridge/dec.c                | 4 ++--
 hw/pci-bridge/i82801b11.c          | 2 +-
 hw/pci-bridge/pci_bridge_dev.c     | 2 +-
 hw/pci-bridge/pcie_pci_bridge.c    | 2 +-
 hw/pci-bridge/pcie_root_port.c     | 2 +-
 hw/pci-bridge/simba.c              | 2 +-
 hw/pci-bridge/xio3130_downstream.c | 2 +-
 hw/pci-bridge/xio3130_upstream.c   | 2 +-
 9 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index da20c915ef..d082707dfa 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -234,7 +234,7 @@ typedef struct PCIDeviceClass {
      * This doesn't mean pci host switch.
      * When card bus bridge is supported, this would be enhanced.
      */
-    int is_bridge;
+    bool is_bridge;
 
     /* rom bar */
     const char *romfile;
diff --git a/hw/pci-bridge/dec.c b/hw/pci-bridge/dec.c
index 8484bfd434..ca40253730 100644
--- a/hw/pci-bridge/dec.c
+++ b/hw/pci-bridge/dec.c
@@ -68,7 +68,7 @@ static void dec_21154_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_DEC;
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     dc->desc = "DEC 21154 PCI-PCI bridge";
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
@@ -129,7 +129,7 @@ static void dec_21154_pci_host_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->revision = 0x02;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     /*
      * PCI-facing part of the host bridge, not usable without the
      * host-facing part, which can't be device_add'ed, yet.
diff --git a/hw/pci-bridge/i82801b11.c b/hw/pci-bridge/i82801b11.c
index 10e590e5c6..6d8b0f54a7 100644
--- a/hw/pci-bridge/i82801b11.c
+++ b/hw/pci-bridge/i82801b11.c
@@ -90,7 +90,7 @@ static void i82801b11_bridge_class_init(ObjectClass *klass, void *data)
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82801BA_11;
     k->revision = ICH9_D2P_A2_REVISION;
diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
index ff6b8323da..c56ed1f52f 100644
--- a/hw/pci-bridge/pci_bridge_dev.c
+++ b/hw/pci-bridge/pci_bridge_dev.c
@@ -253,7 +253,7 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_BRIDGE;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1,
+    k->is_bridge = true;
     dc->desc = "Standard PCI Bridge";
     dc->reset = qdev_pci_bridge_dev_reset;
     dc->props = pci_bridge_dev_properties;
diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index d491b40d04..9a4fba413a 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -143,7 +143,7 @@ static void pcie_pci_bridge_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE;
     k->realize = pcie_pci_bridge_realize;
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index e94d918b6d..be3f4d5e03 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -162,7 +162,7 @@ static void rp_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = rp_write_config;
     k->realize = rp_realize;
     k->exit = rp_exit;
diff --git a/hw/pci-bridge/simba.c b/hw/pci-bridge/simba.c
index dea4c8c5e7..7cf0d6e047 100644
--- a/hw/pci-bridge/simba.c
+++ b/hw/pci-bridge/simba.c
@@ -76,7 +76,7 @@ static void simba_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
     k->revision = 0x11;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
diff --git a/hw/pci-bridge/xio3130_downstream.c b/hw/pci-bridge/xio3130_downstream.c
index 467bbabe4c..ab2a51e15d 100644
--- a/hw/pci-bridge/xio3130_downstream.c
+++ b/hw/pci-bridge/xio3130_downstream.c
@@ -152,7 +152,7 @@ static void xio3130_downstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_downstream_write_config;
     k->realize = xio3130_downstream_realize;
     k->exit = xio3130_downstream_exitfn;
diff --git a/hw/pci-bridge/xio3130_upstream.c b/hw/pci-bridge/xio3130_upstream.c
index b524908cf1..1d41a49ab0 100644
--- a/hw/pci-bridge/xio3130_upstream.c
+++ b/hw/pci-bridge/xio3130_upstream.c
@@ -126,7 +126,7 @@ static void xio3130_upstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_upstream_write_config;
     k->realize = xio3130_upstream_realize;
     k->exit = xio3130_upstream_exitfn;
-- 
MST

[Qemu-devel] [PULL v3 04/17] pci: Make is_bridge a bool

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

The is_bridge field in PCIDevice acts as a bool, but is declared as an int.
Declare it as a bool for clarity, and change everything that writes it to
use true/false instead of 0/1 to match.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-5-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h               | 2 +-
 hw/pci-bridge/dec.c                | 4 ++--
 hw/pci-bridge/i82801b11.c          | 2 +-
 hw/pci-bridge/pci_bridge_dev.c     | 2 +-
 hw/pci-bridge/pcie_pci_bridge.c    | 2 +-
 hw/pci-bridge/pcie_root_port.c     | 2 +-
 hw/pci-bridge/simba.c              | 2 +-
 hw/pci-bridge/xio3130_downstream.c | 2 +-
 hw/pci-bridge/xio3130_upstream.c   | 2 +-
 9 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index da20c915ef..d082707dfa 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -234,7 +234,7 @@ typedef struct PCIDeviceClass {
      * This doesn't mean pci host switch.
      * When card bus bridge is supported, this would be enhanced.
      */
-    int is_bridge;
+    bool is_bridge;
 
     /* rom bar */
     const char *romfile;
diff --git a/hw/pci-bridge/dec.c b/hw/pci-bridge/dec.c
index 8484bfd434..ca40253730 100644
--- a/hw/pci-bridge/dec.c
+++ b/hw/pci-bridge/dec.c
@@ -68,7 +68,7 @@ static void dec_21154_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_DEC;
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     dc->desc = "DEC 21154 PCI-PCI bridge";
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
@@ -129,7 +129,7 @@ static void dec_21154_pci_host_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_DEC_21154;
     k->revision = 0x02;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     /*
      * PCI-facing part of the host bridge, not usable without the
      * host-facing part, which can't be device_add'ed, yet.
diff --git a/hw/pci-bridge/i82801b11.c b/hw/pci-bridge/i82801b11.c
index 10e590e5c6..6d8b0f54a7 100644
--- a/hw/pci-bridge/i82801b11.c
+++ b/hw/pci-bridge/i82801b11.c
@@ -90,7 +90,7 @@ static void i82801b11_bridge_class_init(ObjectClass *klass, void *data)
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82801BA_11;
     k->revision = ICH9_D2P_A2_REVISION;
diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
index ff6b8323da..c56ed1f52f 100644
--- a/hw/pci-bridge/pci_bridge_dev.c
+++ b/hw/pci-bridge/pci_bridge_dev.c
@@ -253,7 +253,7 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_BRIDGE;
     k->class_id = PCI_CLASS_BRIDGE_PCI;
-    k->is_bridge = 1,
+    k->is_bridge = true;
     dc->desc = "Standard PCI Bridge";
     dc->reset = qdev_pci_bridge_dev_reset;
     dc->props = pci_bridge_dev_properties;
diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index d491b40d04..9a4fba413a 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -143,7 +143,7 @@ static void pcie_pci_bridge_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->vendor_id = PCI_VENDOR_ID_REDHAT;
     k->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE;
     k->realize = pcie_pci_bridge_realize;
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index e94d918b6d..be3f4d5e03 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -162,7 +162,7 @@ static void rp_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = rp_write_config;
     k->realize = rp_realize;
     k->exit = rp_exit;
diff --git a/hw/pci-bridge/simba.c b/hw/pci-bridge/simba.c
index dea4c8c5e7..7cf0d6e047 100644
--- a/hw/pci-bridge/simba.c
+++ b/hw/pci-bridge/simba.c
@@ -76,7 +76,7 @@ static void simba_pci_bridge_class_init(ObjectClass *klass, void *data)
     k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
     k->revision = 0x11;
     k->config_write = pci_bridge_write_config;
-    k->is_bridge = 1;
+    k->is_bridge = true;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
     dc->reset = pci_bridge_reset;
     dc->vmsd = &vmstate_pci_device;
diff --git a/hw/pci-bridge/xio3130_downstream.c b/hw/pci-bridge/xio3130_downstream.c
index 467bbabe4c..ab2a51e15d 100644
--- a/hw/pci-bridge/xio3130_downstream.c
+++ b/hw/pci-bridge/xio3130_downstream.c
@@ -152,7 +152,7 @@ static void xio3130_downstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_downstream_write_config;
     k->realize = xio3130_downstream_realize;
     k->exit = xio3130_downstream_exitfn;
diff --git a/hw/pci-bridge/xio3130_upstream.c b/hw/pci-bridge/xio3130_upstream.c
index b524908cf1..1d41a49ab0 100644
--- a/hw/pci-bridge/xio3130_upstream.c
+++ b/hw/pci-bridge/xio3130_upstream.c
@@ -126,7 +126,7 @@ static void xio3130_upstream_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->is_bridge = 1;
+    k->is_bridge = true;
     k->config_write = xio3130_upstream_write_config;
     k->realize = xio3130_upstream_realize;
     k->exit = xio3130_upstream_exitfn;
-- 
MST

[Qemu-devel] [PATCH v4 5/5] pci: Fold pci_get_bus_devfn() into its sole caller

[David Gibson]

The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
itself an old compatibility function.  Fold the two together to avoid
re-using the stale interface.

While we're there replace the explicit fprintf()s with error_report().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 hw/pci/pci.c | 60 ++++++++++++++++++++++++----------------------------
 1 file changed, 28 insertions(+), 32 deletions(-)

diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 7e5f8d001b..d3893bdfe1 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -723,37 +723,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
     return 0;
 }
 
-static PCIBus *pci_get_bus_devfn(int *devfnp, PCIBus *root,
-                                 const char *devaddr)
-{
-    int dom, bus;
-    unsigned slot;
-
-    if (!root) {
-        fprintf(stderr, "No primary PCI bus\n");
-        return NULL;
-    }
-
-    assert(!root->parent_dev);
-
-    if (!devaddr) {
-        *devfnp = -1;
-        return pci_find_bus_nr(root, 0);
-    }
-
-    if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
-        return NULL;
-    }
-
-    if (dom != 0) {
-        fprintf(stderr, "No support for non-zero PCI domains\n");
-        return NULL;
-    }
-
-    *devfnp = PCI_DEVFN(slot, 0);
-    return pci_find_bus_nr(root, bus);
-}
-
 static void pci_init_cmask(PCIDevice *dev)
 {
     pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff);
@@ -1895,6 +1864,8 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
     DeviceState *dev;
     int devfn;
     int i;
+    int dom, busnr;
+    unsigned slot;
 
     if (nd->model && !strcmp(nd->model, "virtio")) {
         g_free(nd->model);
@@ -1928,7 +1899,32 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
         exit(1);
     }
 
-    bus = pci_get_bus_devfn(&devfn, rootbus, devaddr);
+    if (!rootbus) {
+        error_report("No primary PCI bus");
+        exit(1);
+    }
+
+    assert(!rootbus->parent_dev);
+
+    if (!devaddr) {
+        devfn = -1;
+        busnr = 0;
+    } else {
+        if (pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) {
+            error_report("Invalid PCI device address %s for device %s",
+                         devaddr, nd->model);
+            exit(1);
+        }
+
+        if (dom != 0) {
+            error_report("No support for non-zero PCI domains");
+            exit(1);
+        }
+
+        devfn = PCI_DEVFN(slot, 0);
+    }
+
+    bus = pci_find_bus_nr(rootbus, busnr);
     if (!bus) {
         error_report("Invalid PCI device address %s for device %s",
                      devaddr, nd->model);
-- 
2.21.0

Re: [Qemu-devel] [PATCH v4 5/5] pci: Fold pci_get_bus_devfn() into its sole caller

[Greg Kurz]

On Mon, 13 May 2019 16:19:39 +1000
David Gibson <david@gibson.dropbear.id.au> wrote:

> The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
> itself an old compatibility function.  Fold the two together to avoid
> re-using the stale interface.
> 
> While we're there replace the explicit fprintf()s with error_report().
> 
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> ---

Reviewed-by: Greg Kurz <groug@kaod.org>

>  hw/pci/pci.c | 60 ++++++++++++++++++++++++----------------------------
>  1 file changed, 28 insertions(+), 32 deletions(-)
> 
> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> index 7e5f8d001b..d3893bdfe1 100644
> --- a/hw/pci/pci.c
> +++ b/hw/pci/pci.c
> @@ -723,37 +723,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
>      return 0;
>  }
>  
> -static PCIBus *pci_get_bus_devfn(int *devfnp, PCIBus *root,
> -                                 const char *devaddr)
> -{
> -    int dom, bus;
> -    unsigned slot;
> -
> -    if (!root) {
> -        fprintf(stderr, "No primary PCI bus\n");
> -        return NULL;
> -    }
> -
> -    assert(!root->parent_dev);
> -
> -    if (!devaddr) {
> -        *devfnp = -1;
> -        return pci_find_bus_nr(root, 0);
> -    }
> -
> -    if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
> -        return NULL;
> -    }
> -
> -    if (dom != 0) {
> -        fprintf(stderr, "No support for non-zero PCI domains\n");
> -        return NULL;
> -    }
> -
> -    *devfnp = PCI_DEVFN(slot, 0);
> -    return pci_find_bus_nr(root, bus);
> -}
> -
>  static void pci_init_cmask(PCIDevice *dev)
>  {
>      pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff);
> @@ -1895,6 +1864,8 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
>      DeviceState *dev;
>      int devfn;
>      int i;
> +    int dom, busnr;
> +    unsigned slot;
>  
>      if (nd->model && !strcmp(nd->model, "virtio")) {
>          g_free(nd->model);
> @@ -1928,7 +1899,32 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
>          exit(1);
>      }
>  
> -    bus = pci_get_bus_devfn(&devfn, rootbus, devaddr);
> +    if (!rootbus) {
> +        error_report("No primary PCI bus");
> +        exit(1);
> +    }
> +
> +    assert(!rootbus->parent_dev);
> +
> +    if (!devaddr) {
> +        devfn = -1;
> +        busnr = 0;
> +    } else {
> +        if (pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) {
> +            error_report("Invalid PCI device address %s for device %s",
> +                         devaddr, nd->model);
> +            exit(1);
> +        }
> +
> +        if (dom != 0) {
> +            error_report("No support for non-zero PCI domains");
> +            exit(1);
> +        }
> +
> +        devfn = PCI_DEVFN(slot, 0);
> +    }
> +
> +    bus = pci_find_bus_nr(rootbus, busnr);
>      if (!bus) {
>          error_report("Invalid PCI device address %s for device %s",
>                       devaddr, nd->model);

[Qemu-devel] [PULL 06/10] pci: Fold pci_get_bus_devfn() into its sole caller

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
itself an old compatibility function.  Fold the two together to avoid
re-using the stale interface.

While we're there replace the explicit fprintf()s with error_report().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513061939.3464-6-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci/pci.c | 60 ++++++++++++++++++++++++----------------------------
 1 file changed, 28 insertions(+), 32 deletions(-)

diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 7e5f8d001b..d3893bdfe1 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -723,37 +723,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
     return 0;
 }
 
-static PCIBus *pci_get_bus_devfn(int *devfnp, PCIBus *root,
-                                 const char *devaddr)
-{
-    int dom, bus;
-    unsigned slot;
-
-    if (!root) {
-        fprintf(stderr, "No primary PCI bus\n");
-        return NULL;
-    }
-
-    assert(!root->parent_dev);
-
-    if (!devaddr) {
-        *devfnp = -1;
-        return pci_find_bus_nr(root, 0);
-    }
-
-    if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
-        return NULL;
-    }
-
-    if (dom != 0) {
-        fprintf(stderr, "No support for non-zero PCI domains\n");
-        return NULL;
-    }
-
-    *devfnp = PCI_DEVFN(slot, 0);
-    return pci_find_bus_nr(root, bus);
-}
-
 static void pci_init_cmask(PCIDevice *dev)
 {
     pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff);
@@ -1895,6 +1864,8 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
     DeviceState *dev;
     int devfn;
     int i;
+    int dom, busnr;
+    unsigned slot;
 
     if (nd->model && !strcmp(nd->model, "virtio")) {
         g_free(nd->model);
@@ -1928,7 +1899,32 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
         exit(1);
     }
 
-    bus = pci_get_bus_devfn(&devfn, rootbus, devaddr);
+    if (!rootbus) {
+        error_report("No primary PCI bus");
+        exit(1);
+    }
+
+    assert(!rootbus->parent_dev);
+
+    if (!devaddr) {
+        devfn = -1;
+        busnr = 0;
+    } else {
+        if (pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) {
+            error_report("Invalid PCI device address %s for device %s",
+                         devaddr, nd->model);
+            exit(1);
+        }
+
+        if (dom != 0) {
+            error_report("No support for non-zero PCI domains");
+            exit(1);
+        }
+
+        devfn = PCI_DEVFN(slot, 0);
+    }
+
+    bus = pci_find_bus_nr(rootbus, busnr);
     if (!bus) {
         error_report("Invalid PCI device address %s for device %s",
                      devaddr, nd->model);
-- 
MST

[Qemu-devel] [PULL v2 05/14] pci: Fold pci_get_bus_devfn() into its sole caller

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
itself an old compatibility function.  Fold the two together to avoid
re-using the stale interface.

While we're there replace the explicit fprintf()s with error_report().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513061939.3464-6-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci/pci.c | 60 ++++++++++++++++++++++++----------------------------
 1 file changed, 28 insertions(+), 32 deletions(-)

diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 7e5f8d001b..d3893bdfe1 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -723,37 +723,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
     return 0;
 }
 
-static PCIBus *pci_get_bus_devfn(int *devfnp, PCIBus *root,
-                                 const char *devaddr)
-{
-    int dom, bus;
-    unsigned slot;
-
-    if (!root) {
-        fprintf(stderr, "No primary PCI bus\n");
-        return NULL;
-    }
-
-    assert(!root->parent_dev);
-
-    if (!devaddr) {
-        *devfnp = -1;
-        return pci_find_bus_nr(root, 0);
-    }
-
-    if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
-        return NULL;
-    }
-
-    if (dom != 0) {
-        fprintf(stderr, "No support for non-zero PCI domains\n");
-        return NULL;
-    }
-
-    *devfnp = PCI_DEVFN(slot, 0);
-    return pci_find_bus_nr(root, bus);
-}
-
 static void pci_init_cmask(PCIDevice *dev)
 {
     pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff);
@@ -1895,6 +1864,8 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
     DeviceState *dev;
     int devfn;
     int i;
+    int dom, busnr;
+    unsigned slot;
 
     if (nd->model && !strcmp(nd->model, "virtio")) {
         g_free(nd->model);
@@ -1928,7 +1899,32 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
         exit(1);
     }
 
-    bus = pci_get_bus_devfn(&devfn, rootbus, devaddr);
+    if (!rootbus) {
+        error_report("No primary PCI bus");
+        exit(1);
+    }
+
+    assert(!rootbus->parent_dev);
+
+    if (!devaddr) {
+        devfn = -1;
+        busnr = 0;
+    } else {
+        if (pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) {
+            error_report("Invalid PCI device address %s for device %s",
+                         devaddr, nd->model);
+            exit(1);
+        }
+
+        if (dom != 0) {
+            error_report("No support for non-zero PCI domains");
+            exit(1);
+        }
+
+        devfn = PCI_DEVFN(slot, 0);
+    }
+
+    bus = pci_find_bus_nr(rootbus, busnr);
     if (!bus) {
         error_report("Invalid PCI device address %s for device %s",
                      devaddr, nd->model);
-- 
MST

[Qemu-devel] [PULL v3 05/17] pci: Fold pci_get_bus_devfn() into its sole caller

[Michael S. Tsirkin]

From: David Gibson <david@gibson.dropbear.id.au>

The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
itself an old compatibility function.  Fold the two together to avoid
re-using the stale interface.

While we're there replace the explicit fprintf()s with error_report().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513061939.3464-6-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 hw/pci/pci.c | 60 ++++++++++++++++++++++++----------------------------
 1 file changed, 28 insertions(+), 32 deletions(-)

diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 7e5f8d001b..d3893bdfe1 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -723,37 +723,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
     return 0;
 }
 
-static PCIBus *pci_get_bus_devfn(int *devfnp, PCIBus *root,
-                                 const char *devaddr)
-{
-    int dom, bus;
-    unsigned slot;
-
-    if (!root) {
-        fprintf(stderr, "No primary PCI bus\n");
-        return NULL;
-    }
-
-    assert(!root->parent_dev);
-
-    if (!devaddr) {
-        *devfnp = -1;
-        return pci_find_bus_nr(root, 0);
-    }
-
-    if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
-        return NULL;
-    }
-
-    if (dom != 0) {
-        fprintf(stderr, "No support for non-zero PCI domains\n");
-        return NULL;
-    }
-
-    *devfnp = PCI_DEVFN(slot, 0);
-    return pci_find_bus_nr(root, bus);
-}
-
 static void pci_init_cmask(PCIDevice *dev)
 {
     pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff);
@@ -1895,6 +1864,8 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
     DeviceState *dev;
     int devfn;
     int i;
+    int dom, busnr;
+    unsigned slot;
 
     if (nd->model && !strcmp(nd->model, "virtio")) {
         g_free(nd->model);
@@ -1928,7 +1899,32 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
         exit(1);
     }
 
-    bus = pci_get_bus_devfn(&devfn, rootbus, devaddr);
+    if (!rootbus) {
+        error_report("No primary PCI bus");
+        exit(1);
+    }
+
+    assert(!rootbus->parent_dev);
+
+    if (!devaddr) {
+        devfn = -1;
+        busnr = 0;
+    } else {
+        if (pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) {
+            error_report("Invalid PCI device address %s for device %s",
+                         devaddr, nd->model);
+            exit(1);
+        }
+
+        if (dom != 0) {
+            error_report("No support for non-zero PCI domains");
+            exit(1);
+        }
+
+        devfn = PCI_DEVFN(slot, 0);
+    }
+
+    bus = pci_find_bus_nr(rootbus, busnr);
     if (!bus) {
         error_report("Invalid PCI device address %s for device %s",
                      devaddr, nd->model);
-- 
MST

[Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Liran Alon]

Hi,

This patch series aims to add supprot to migrate a VM with a vhost-scsi device.

The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
VM is stopped (As happens on migratino pre-copy completion).

The 2nd patch adds ability to save/load vhost-scsi device state in VMState.

The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
it's setup supports vhost-scsi migratino. For more detailed information on why
this is valid, see commit message of specific patch.

Regards,
-Liran

[Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Liran Alon]

Hi,

This patch series aims to add supprot to migrate a VM with a vhost-scsi device.

The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
VM is stopped (As happens on migratino pre-copy completion).

The 2nd patch adds ability to save/load vhost-scsi device state in VMState.

The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
it's setup supports vhost-scsi migratino. For more detailed information on why
this is valid, see commit message of specific patch.

Regards,
-Liran

[Qemu-devel] [PATCH v2 1/3] vhost-scsi: The vhost backend should be stopped when the VM is not running

[Liran Alon]

From: Nir Weiner <nir.weiner@oracle.com>

vhost-scsi doesn’t takes into account whether the VM is running or not in
order to decide if it should start/stop vhost backend.
This would lead to vhost backend still being active when VM's RunState
suddenly change to stopped.

An example of when this issue is encountered is when Live-Migration Pre-Copy
phase completes. As in this case, VM state will be changed to stopped (while
vhost backend is still active), which will result in
virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status()
executed but vhost_scsi_set_status() will just return without stopping
vhost backend.

To handle this, change code to consider that vhost processing should be
stopped when VM is not running. Similar to how it is done in vhost-vsock
device at vhost_vsock_set_status().

Fixes: 5e9be92d7752 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”)
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
---
 hw/scsi/vhost-scsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index 61e2e57da9d5..ca42cff1b907 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -114,6 +114,10 @@ static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
     bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK);
 
+    if (!vdev->vm_running) {
+        start = false;
+    }
+
     if (vsc->dev.started == start) {
         return;
     }
-- 
2.20.1

[Qemu-devel] [PATCH v2 1/3] vhost-scsi: The vhost backend should be stopped when the VM is not running

[Liran Alon]

From: Nir Weiner <nir.weiner@oracle.com>

vhost-scsi doesn’t takes into account whether the VM is running or not in
order to decide if it should start/stop vhost backend.
This would lead to vhost backend still being active when VM's RunState
suddenly change to stopped.

An example of when this issue is encountered is when Live-Migration Pre-Copy
phase completes. As in this case, VM state will be changed to stopped (while
vhost backend is still active), which will result in
virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status()
executed but vhost_scsi_set_status() will just return without stopping
vhost backend.

To handle this, change code to consider that vhost processing should be
stopped when VM is not running. Similar to how it is done in vhost-vsock
device at vhost_vsock_set_status().

Fixes: 5e9be92d7752 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”)
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
---
 hw/scsi/vhost-scsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index 61e2e57da9d5..ca42cff1b907 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -114,6 +114,10 @@ static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
     bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK);
 
+    if (!vdev->vm_running) {
+        start = false;
+    }
+
     if (vsc->dev.started == start) {
         return;
     }
-- 
2.20.1

[Qemu-devel] [PULL v2 11/14] vhost-scsi: The vhost backend should be stopped when the VM is not running

[Michael S. Tsirkin]

From: Nir Weiner <nir.weiner@oracle.com>

vhost-scsi doesn’t takes into account whether the VM is running or not in
order to decide if it should start/stop vhost backend.
This would lead to vhost backend still being active when VM's RunState
suddenly change to stopped.

An example of when this issue is encountered is when Live-Migration Pre-Copy
phase completes. As in this case, VM state will be changed to stopped (while
vhost backend is still active), which will result in
virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status()
executed but vhost_scsi_set_status() will just return without stopping
vhost backend.

To handle this, change code to consider that vhost processing should be
stopped when VM is not running. Similar to how it is done in vhost-vsock
device at vhost_vsock_set_status().

Fixes: 5e9be92d7752 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”)
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Message-Id: <20190416125912.44001-2-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-scsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index 61e2e57da9..ca42cff1b9 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -114,6 +114,10 @@ static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
     bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK);
 
+    if (!vdev->vm_running) {
+        start = false;
+    }
+
     if (vsc->dev.started == start) {
         return;
     }
-- 
MST

[Qemu-devel] [PULL v3 11/17] vhost-scsi: The vhost backend should be stopped when the VM is not running

[Michael S. Tsirkin]

From: Nir Weiner <nir.weiner@oracle.com>

vhost-scsi doesn’t takes into account whether the VM is running or not in
order to decide if it should start/stop vhost backend.
This would lead to vhost backend still being active when VM's RunState
suddenly change to stopped.

An example of when this issue is encountered is when Live-Migration Pre-Copy
phase completes. As in this case, VM state will be changed to stopped (while
vhost backend is still active), which will result in
virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status()
executed but vhost_scsi_set_status() will just return without stopping
vhost backend.

To handle this, change code to consider that vhost processing should be
stopped when VM is not running. Similar to how it is done in vhost-vsock
device at vhost_vsock_set_status().

Fixes: 5e9be92d7752 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”)
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Message-Id: <20190416125912.44001-2-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-scsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index 61e2e57da9..ca42cff1b9 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -114,6 +114,10 @@ static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
     bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK);
 
+    if (!vdev->vm_running) {
+        start = false;
+    }
+
     if (vsc->dev.started == start) {
         return;
     }
-- 
MST

[Qemu-devel] [PATCH v2 2/3] vhost-scsi: Add VMState descriptor

[Liran Alon]

From: Nir Weiner <nir.weiner@oracle.com>

As preparation of enabling migration of vhost-scsi device,
define it’s VMState. Note, we keep the convention of
verifying in the pre_save() method that the vhost backend
must be stopped before attempting to save the device
state. Similar to how it is done for vhost-vsock.

Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
---
 hw/scsi/vhost-scsi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index ca42cff1b907..eb0cf9e1312f 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -139,6 +139,28 @@ static void vhost_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
 {
 }
 
+static int vhost_scsi_pre_save(void *opaque)
+{
+    VHostSCSICommon *vsc = opaque;
+
+    /* At this point, backend must be stopped, otherwise
+     * it might keep writing to memory. */
+    assert(!vsc->dev.started);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_virtio_vhost_scsi = {
+    .name = "virtio-vhost_scsi",
+    .minimum_version_id = 1,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_VIRTIO_DEVICE,
+        VMSTATE_END_OF_LIST()
+    },
+    .pre_save = vhost_scsi_pre_save,
+};
+
 static void vhost_scsi_realize(DeviceState *dev, Error **errp)
 {
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
@@ -256,6 +278,7 @@ static void vhost_scsi_class_init(ObjectClass *klass, void *data)
     FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(klass);
 
     dc->props = vhost_scsi_properties;
+    dc->vmsd = &vmstate_virtio_vhost_scsi;
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
     vdc->realize = vhost_scsi_realize;
     vdc->unrealize = vhost_scsi_unrealize;
-- 
2.20.1

[Qemu-devel] [PATCH v2 2/3] vhost-scsi: Add VMState descriptor

[Liran Alon]

From: Nir Weiner <nir.weiner@oracle.com>

As preparation of enabling migration of vhost-scsi device,
define it’s VMState. Note, we keep the convention of
verifying in the pre_save() method that the vhost backend
must be stopped before attempting to save the device
state. Similar to how it is done for vhost-vsock.

Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
---
 hw/scsi/vhost-scsi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index ca42cff1b907..eb0cf9e1312f 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -139,6 +139,28 @@ static void vhost_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
 {
 }
 
+static int vhost_scsi_pre_save(void *opaque)
+{
+    VHostSCSICommon *vsc = opaque;
+
+    /* At this point, backend must be stopped, otherwise
+     * it might keep writing to memory. */
+    assert(!vsc->dev.started);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_virtio_vhost_scsi = {
+    .name = "virtio-vhost_scsi",
+    .minimum_version_id = 1,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_VIRTIO_DEVICE,
+        VMSTATE_END_OF_LIST()
+    },
+    .pre_save = vhost_scsi_pre_save,
+};
+
 static void vhost_scsi_realize(DeviceState *dev, Error **errp)
 {
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
@@ -256,6 +278,7 @@ static void vhost_scsi_class_init(ObjectClass *klass, void *data)
     FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(klass);
 
     dc->props = vhost_scsi_properties;
+    dc->vmsd = &vmstate_virtio_vhost_scsi;
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
     vdc->realize = vhost_scsi_realize;
     vdc->unrealize = vhost_scsi_unrealize;
-- 
2.20.1

[Qemu-devel] [PULL v2 12/14] vhost-scsi: Add VMState descriptor

[Michael S. Tsirkin]

From: Nir Weiner <nir.weiner@oracle.com>

As preparation of enabling migration of vhost-scsi device,
define it’s VMState. Note, we keep the convention of
verifying in the pre_save() method that the vhost backend
must be stopped before attempting to save the device
state. Similar to how it is done for vhost-vsock.

Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Message-Id: <20190416125912.44001-3-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-scsi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index ca42cff1b9..eb0cf9e131 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -139,6 +139,28 @@ static void vhost_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
 {
 }
 
+static int vhost_scsi_pre_save(void *opaque)
+{
+    VHostSCSICommon *vsc = opaque;
+
+    /* At this point, backend must be stopped, otherwise
+     * it might keep writing to memory. */
+    assert(!vsc->dev.started);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_virtio_vhost_scsi = {
+    .name = "virtio-vhost_scsi",
+    .minimum_version_id = 1,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_VIRTIO_DEVICE,
+        VMSTATE_END_OF_LIST()
+    },
+    .pre_save = vhost_scsi_pre_save,
+};
+
 static void vhost_scsi_realize(DeviceState *dev, Error **errp)
 {
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
@@ -256,6 +278,7 @@ static void vhost_scsi_class_init(ObjectClass *klass, void *data)
     FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(klass);
 
     dc->props = vhost_scsi_properties;
+    dc->vmsd = &vmstate_virtio_vhost_scsi;
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
     vdc->realize = vhost_scsi_realize;
     vdc->unrealize = vhost_scsi_unrealize;
-- 
MST

[Qemu-devel] [PULL v3 12/17] vhost-scsi: Add VMState descriptor

[Michael S. Tsirkin]

From: Nir Weiner <nir.weiner@oracle.com>

As preparation of enabling migration of vhost-scsi device,
define it’s VMState. Note, we keep the convention of
verifying in the pre_save() method that the vhost backend
must be stopped before attempting to save the device
state. Similar to how it is done for vhost-vsock.

Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Message-Id: <20190416125912.44001-3-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/scsi/vhost-scsi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index ca42cff1b9..eb0cf9e131 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -139,6 +139,28 @@ static void vhost_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
 {
 }
 
+static int vhost_scsi_pre_save(void *opaque)
+{
+    VHostSCSICommon *vsc = opaque;
+
+    /* At this point, backend must be stopped, otherwise
+     * it might keep writing to memory. */
+    assert(!vsc->dev.started);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_virtio_vhost_scsi = {
+    .name = "virtio-vhost_scsi",
+    .minimum_version_id = 1,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_VIRTIO_DEVICE,
+        VMSTATE_END_OF_LIST()
+    },
+    .pre_save = vhost_scsi_pre_save,
+};
+
 static void vhost_scsi_realize(DeviceState *dev, Error **errp)
 {
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
@@ -256,6 +278,7 @@ static void vhost_scsi_class_init(ObjectClass *klass, void *data)
     FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(klass);
 
     dc->props = vhost_scsi_properties;
+    dc->vmsd = &vmstate_virtio_vhost_scsi;
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
     vdc->realize = vhost_scsi_realize;
     vdc->unrealize = vhost_scsi_unrealize;
-- 
MST

[Qemu-devel] [PATCH v2 3/3] vhost-scsi: Allow user to enable migration

[Liran Alon]

In order to perform a valid migration of a vhost-scsi device,
the following requirements must be met:
(1) The virtio-scsi device state needs to be saved & loaded.
(2) The vhost backend must be stopped before virtio-scsi device state
is saved:
  (2.1) Sync vhost backend state to virtio-scsi device state.
  (2.2) No further I/O requests are made by vhost backend to target
        SCSI device.
  (2.3) No further guest memory access takes place after VM is stopped.
(3) Requests in-flight to target SCSI device are completed before
    migration handover.
(4) Target SCSI device state needs to be saved & loaded into the
    destination host target SCSI device.

Previous commit ("vhost-scsi: Add VMState descriptor")
add support to save & load the device state using VMState.
This meets requirement (1).

When VM is stopped by migration thread (On Pre-Copy complete), the
following code path is executed:
migration_completion() -> vm_stop_force_state() -> vm_stop() ->
do_vm_stop().

do_vm_stop() calls first pause_all_vcpus() which pause all guest
vCPUs and then call vm_state_notify().
In case of vhost-scsi device, this will lead to the following code path
to be executed:
vm_state_notify() -> virtio_vmstate_change() ->
virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop().
vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and
vhost_scsi_common_stop().

vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to
vhost backend which will reach kernel's vhost_scsi_clear_endpoint()
which process all pending I/O requests and wait for them to complete
(vhost_scsi_flush()). This meets requirement (3).

vhost_scsi_common_stop() will stop the vhost backend.
As part of this stop, dirty-bitmap is synced and vhost backend state is
synced with virtio-scsi device state. As at this point guest vCPUs are
already paused, this meets requirement (2).

At this point we are left with requirement (4) which is target SCSI
device specific and therefore cannot be done by QEMU. Which is the main
reason why vhost-scsi adds a migration blocker.
However, as this can be handled either by an external orchestrator or
by using shared-storage (i.e. iSCSI), there is no reason to limit the
orchestrator from being able to explictly specify it wish to enable
migration even when VM have a vhost-scsi device.

Considering all the above, this commit allows orchestrator to explictly
specify that it is responsbile for taking care of requirement (4) and
therefore vhost-scsi should not add a migration blocker.

Reviewed-by: Nir Weiner <nir.weiner@oracle.com>
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
---
 hw/scsi/vhost-scsi.c                  | 30 ++++++++++++++++++---------
 include/hw/virtio/vhost-scsi-common.h |  1 +
 2 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index eb0cf9e1312f..6b01accf61ad 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -199,13 +199,18 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
         goto close_fd;
     }
 
-    error_setg(&vsc->migration_blocker,
-               "vhost-scsi does not support migration");
-    migrate_add_blocker(vsc->migration_blocker, &err);
-    if (err) {
-        error_propagate(errp, err);
-        error_free(vsc->migration_blocker);
-        goto close_fd;
+    if (!vsc->migratable) {
+        error_setg(&vsc->migration_blocker,
+                "vhost-scsi does not support migration in all cases. "
+                "When external environment supports it (Orchestrator migrates "
+                "target SCSI device state or use shared storage over network), "
+                "set 'migratable' property to true to enable migration.");
+        migrate_add_blocker(vsc->migration_blocker, &err);
+        if (err) {
+            error_propagate(errp, err);
+            error_free(vsc->migration_blocker);
+            goto close_fd;
+        }
     }
 
     vsc->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
@@ -230,7 +235,9 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
     return;
 
  free_vqs:
-    migrate_del_blocker(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+    }
     g_free(vsc->dev.vqs);
  close_fd:
     close(vhostfd);
@@ -243,8 +250,10 @@ static void vhost_scsi_unrealize(DeviceState *dev, Error **errp)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(dev);
     struct vhost_virtqueue *vqs = vsc->dev.vqs;
 
-    migrate_del_blocker(vsc->migration_blocker);
-    error_free(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+        error_free(vsc->migration_blocker);
+    }
 
     /* This will stop vhost backend. */
     vhost_scsi_set_status(vdev, 0);
@@ -268,6 +277,7 @@ static Property vhost_scsi_properties[] = {
     DEFINE_PROP_BIT64("t10_pi", VHostSCSICommon, host_features,
                                                  VIRTIO_SCSI_F_T10_PI,
                                                  false),
+    DEFINE_PROP_BOOL("migratable", VHostSCSICommon, migratable, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/virtio/vhost-scsi-common.h b/include/hw/virtio/vhost-scsi-common.h
index 57fb1d87b51d..4eab767ee89f 100644
--- a/include/hw/virtio/vhost-scsi-common.h
+++ b/include/hw/virtio/vhost-scsi-common.h
@@ -36,6 +36,7 @@ typedef struct VHostSCSICommon {
     int target;
     int lun;
     uint64_t host_features;
+    bool migratable;
 } VHostSCSICommon;
 
 int vhost_scsi_common_start(VHostSCSICommon *vsc);
-- 
2.20.1

[Qemu-devel] [PATCH v2 3/3] vhost-scsi: Allow user to enable migration

[Liran Alon]

In order to perform a valid migration of a vhost-scsi device,
the following requirements must be met:
(1) The virtio-scsi device state needs to be saved & loaded.
(2) The vhost backend must be stopped before virtio-scsi device state
is saved:
  (2.1) Sync vhost backend state to virtio-scsi device state.
  (2.2) No further I/O requests are made by vhost backend to target
        SCSI device.
  (2.3) No further guest memory access takes place after VM is stopped.
(3) Requests in-flight to target SCSI device are completed before
    migration handover.
(4) Target SCSI device state needs to be saved & loaded into the
    destination host target SCSI device.

Previous commit ("vhost-scsi: Add VMState descriptor")
add support to save & load the device state using VMState.
This meets requirement (1).

When VM is stopped by migration thread (On Pre-Copy complete), the
following code path is executed:
migration_completion() -> vm_stop_force_state() -> vm_stop() ->
do_vm_stop().

do_vm_stop() calls first pause_all_vcpus() which pause all guest
vCPUs and then call vm_state_notify().
In case of vhost-scsi device, this will lead to the following code path
to be executed:
vm_state_notify() -> virtio_vmstate_change() ->
virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop().
vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and
vhost_scsi_common_stop().

vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to
vhost backend which will reach kernel's vhost_scsi_clear_endpoint()
which process all pending I/O requests and wait for them to complete
(vhost_scsi_flush()). This meets requirement (3).

vhost_scsi_common_stop() will stop the vhost backend.
As part of this stop, dirty-bitmap is synced and vhost backend state is
synced with virtio-scsi device state. As at this point guest vCPUs are
already paused, this meets requirement (2).

At this point we are left with requirement (4) which is target SCSI
device specific and therefore cannot be done by QEMU. Which is the main
reason why vhost-scsi adds a migration blocker.
However, as this can be handled either by an external orchestrator or
by using shared-storage (i.e. iSCSI), there is no reason to limit the
orchestrator from being able to explictly specify it wish to enable
migration even when VM have a vhost-scsi device.

Considering all the above, this commit allows orchestrator to explictly
specify that it is responsbile for taking care of requirement (4) and
therefore vhost-scsi should not add a migration blocker.

Reviewed-by: Nir Weiner <nir.weiner@oracle.com>
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
---
 hw/scsi/vhost-scsi.c                  | 30 ++++++++++++++++++---------
 include/hw/virtio/vhost-scsi-common.h |  1 +
 2 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index eb0cf9e1312f..6b01accf61ad 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -199,13 +199,18 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
         goto close_fd;
     }
 
-    error_setg(&vsc->migration_blocker,
-               "vhost-scsi does not support migration");
-    migrate_add_blocker(vsc->migration_blocker, &err);
-    if (err) {
-        error_propagate(errp, err);
-        error_free(vsc->migration_blocker);
-        goto close_fd;
+    if (!vsc->migratable) {
+        error_setg(&vsc->migration_blocker,
+                "vhost-scsi does not support migration in all cases. "
+                "When external environment supports it (Orchestrator migrates "
+                "target SCSI device state or use shared storage over network), "
+                "set 'migratable' property to true to enable migration.");
+        migrate_add_blocker(vsc->migration_blocker, &err);
+        if (err) {
+            error_propagate(errp, err);
+            error_free(vsc->migration_blocker);
+            goto close_fd;
+        }
     }
 
     vsc->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
@@ -230,7 +235,9 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
     return;
 
  free_vqs:
-    migrate_del_blocker(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+    }
     g_free(vsc->dev.vqs);
  close_fd:
     close(vhostfd);
@@ -243,8 +250,10 @@ static void vhost_scsi_unrealize(DeviceState *dev, Error **errp)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(dev);
     struct vhost_virtqueue *vqs = vsc->dev.vqs;
 
-    migrate_del_blocker(vsc->migration_blocker);
-    error_free(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+        error_free(vsc->migration_blocker);
+    }
 
     /* This will stop vhost backend. */
     vhost_scsi_set_status(vdev, 0);
@@ -268,6 +277,7 @@ static Property vhost_scsi_properties[] = {
     DEFINE_PROP_BIT64("t10_pi", VHostSCSICommon, host_features,
                                                  VIRTIO_SCSI_F_T10_PI,
                                                  false),
+    DEFINE_PROP_BOOL("migratable", VHostSCSICommon, migratable, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/virtio/vhost-scsi-common.h b/include/hw/virtio/vhost-scsi-common.h
index 57fb1d87b51d..4eab767ee89f 100644
--- a/include/hw/virtio/vhost-scsi-common.h
+++ b/include/hw/virtio/vhost-scsi-common.h
@@ -36,6 +36,7 @@ typedef struct VHostSCSICommon {
     int target;
     int lun;
     uint64_t host_features;
+    bool migratable;
 } VHostSCSICommon;
 
 int vhost_scsi_common_start(VHostSCSICommon *vsc);
-- 
2.20.1

[Qemu-devel] [PULL v2 13/14] vhost-scsi: Allow user to enable migration

[Michael S. Tsirkin]

From: Liran Alon <liran.alon@oracle.com>

In order to perform a valid migration of a vhost-scsi device,
the following requirements must be met:
(1) The virtio-scsi device state needs to be saved & loaded.
(2) The vhost backend must be stopped before virtio-scsi device state
is saved:
  (2.1) Sync vhost backend state to virtio-scsi device state.
  (2.2) No further I/O requests are made by vhost backend to target
        SCSI device.
  (2.3) No further guest memory access takes place after VM is stopped.
(3) Requests in-flight to target SCSI device are completed before
    migration handover.
(4) Target SCSI device state needs to be saved & loaded into the
    destination host target SCSI device.

Previous commit ("vhost-scsi: Add VMState descriptor")
add support to save & load the device state using VMState.
This meets requirement (1).

When VM is stopped by migration thread (On Pre-Copy complete), the
following code path is executed:
migration_completion() -> vm_stop_force_state() -> vm_stop() ->
do_vm_stop().

do_vm_stop() calls first pause_all_vcpus() which pause all guest
vCPUs and then call vm_state_notify().
In case of vhost-scsi device, this will lead to the following code path
to be executed:
vm_state_notify() -> virtio_vmstate_change() ->
virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop().
vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and
vhost_scsi_common_stop().

vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to
vhost backend which will reach kernel's vhost_scsi_clear_endpoint()
which process all pending I/O requests and wait for them to complete
(vhost_scsi_flush()). This meets requirement (3).

vhost_scsi_common_stop() will stop the vhost backend.
As part of this stop, dirty-bitmap is synced and vhost backend state is
synced with virtio-scsi device state. As at this point guest vCPUs are
already paused, this meets requirement (2).

At this point we are left with requirement (4) which is target SCSI
device specific and therefore cannot be done by QEMU. Which is the main
reason why vhost-scsi adds a migration blocker.
However, as this can be handled either by an external orchestrator or
by using shared-storage (i.e. iSCSI), there is no reason to limit the
orchestrator from being able to explictly specify it wish to enable
migration even when VM have a vhost-scsi device.

Considering all the above, this commit allows orchestrator to explictly
specify that it is responsbile for taking care of requirement (4) and
therefore vhost-scsi should not add a migration blocker.

Reviewed-by: Nir Weiner <nir.weiner@oracle.com>
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190416125912.44001-4-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/virtio/vhost-scsi-common.h |  1 +
 hw/scsi/vhost-scsi.c                  | 30 ++++++++++++++++++---------
 2 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/include/hw/virtio/vhost-scsi-common.h b/include/hw/virtio/vhost-scsi-common.h
index 57fb1d87b5..4eab767ee8 100644
--- a/include/hw/virtio/vhost-scsi-common.h
+++ b/include/hw/virtio/vhost-scsi-common.h
@@ -36,6 +36,7 @@ typedef struct VHostSCSICommon {
     int target;
     int lun;
     uint64_t host_features;
+    bool migratable;
 } VHostSCSICommon;
 
 int vhost_scsi_common_start(VHostSCSICommon *vsc);
diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index eb0cf9e131..6b01accf61 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -199,13 +199,18 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
         goto close_fd;
     }
 
-    error_setg(&vsc->migration_blocker,
-               "vhost-scsi does not support migration");
-    migrate_add_blocker(vsc->migration_blocker, &err);
-    if (err) {
-        error_propagate(errp, err);
-        error_free(vsc->migration_blocker);
-        goto close_fd;
+    if (!vsc->migratable) {
+        error_setg(&vsc->migration_blocker,
+                "vhost-scsi does not support migration in all cases. "
+                "When external environment supports it (Orchestrator migrates "
+                "target SCSI device state or use shared storage over network), "
+                "set 'migratable' property to true to enable migration.");
+        migrate_add_blocker(vsc->migration_blocker, &err);
+        if (err) {
+            error_propagate(errp, err);
+            error_free(vsc->migration_blocker);
+            goto close_fd;
+        }
     }
 
     vsc->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
@@ -230,7 +235,9 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
     return;
 
  free_vqs:
-    migrate_del_blocker(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+    }
     g_free(vsc->dev.vqs);
  close_fd:
     close(vhostfd);
@@ -243,8 +250,10 @@ static void vhost_scsi_unrealize(DeviceState *dev, Error **errp)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(dev);
     struct vhost_virtqueue *vqs = vsc->dev.vqs;
 
-    migrate_del_blocker(vsc->migration_blocker);
-    error_free(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+        error_free(vsc->migration_blocker);
+    }
 
     /* This will stop vhost backend. */
     vhost_scsi_set_status(vdev, 0);
@@ -268,6 +277,7 @@ static Property vhost_scsi_properties[] = {
     DEFINE_PROP_BIT64("t10_pi", VHostSCSICommon, host_features,
                                                  VIRTIO_SCSI_F_T10_PI,
                                                  false),
+    DEFINE_PROP_BOOL("migratable", VHostSCSICommon, migratable, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
MST

[Qemu-devel] [PULL v3 13/17] vhost-scsi: Allow user to enable migration

[Michael S. Tsirkin]

From: Liran Alon <liran.alon@oracle.com>

In order to perform a valid migration of a vhost-scsi device,
the following requirements must be met:
(1) The virtio-scsi device state needs to be saved & loaded.
(2) The vhost backend must be stopped before virtio-scsi device state
is saved:
  (2.1) Sync vhost backend state to virtio-scsi device state.
  (2.2) No further I/O requests are made by vhost backend to target
        SCSI device.
  (2.3) No further guest memory access takes place after VM is stopped.
(3) Requests in-flight to target SCSI device are completed before
    migration handover.
(4) Target SCSI device state needs to be saved & loaded into the
    destination host target SCSI device.

Previous commit ("vhost-scsi: Add VMState descriptor")
add support to save & load the device state using VMState.
This meets requirement (1).

When VM is stopped by migration thread (On Pre-Copy complete), the
following code path is executed:
migration_completion() -> vm_stop_force_state() -> vm_stop() ->
do_vm_stop().

do_vm_stop() calls first pause_all_vcpus() which pause all guest
vCPUs and then call vm_state_notify().
In case of vhost-scsi device, this will lead to the following code path
to be executed:
vm_state_notify() -> virtio_vmstate_change() ->
virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop().
vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and
vhost_scsi_common_stop().

vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to
vhost backend which will reach kernel's vhost_scsi_clear_endpoint()
which process all pending I/O requests and wait for them to complete
(vhost_scsi_flush()). This meets requirement (3).

vhost_scsi_common_stop() will stop the vhost backend.
As part of this stop, dirty-bitmap is synced and vhost backend state is
synced with virtio-scsi device state. As at this point guest vCPUs are
already paused, this meets requirement (2).

At this point we are left with requirement (4) which is target SCSI
device specific and therefore cannot be done by QEMU. Which is the main
reason why vhost-scsi adds a migration blocker.
However, as this can be handled either by an external orchestrator or
by using shared-storage (i.e. iSCSI), there is no reason to limit the
orchestrator from being able to explictly specify it wish to enable
migration even when VM have a vhost-scsi device.

Considering all the above, this commit allows orchestrator to explictly
specify that it is responsbile for taking care of requirement (4) and
therefore vhost-scsi should not add a migration blocker.

Reviewed-by: Nir Weiner <nir.weiner@oracle.com>
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190416125912.44001-4-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/virtio/vhost-scsi-common.h |  1 +
 hw/scsi/vhost-scsi.c                  | 30 ++++++++++++++++++---------
 2 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/include/hw/virtio/vhost-scsi-common.h b/include/hw/virtio/vhost-scsi-common.h
index 57fb1d87b5..4eab767ee8 100644
--- a/include/hw/virtio/vhost-scsi-common.h
+++ b/include/hw/virtio/vhost-scsi-common.h
@@ -36,6 +36,7 @@ typedef struct VHostSCSICommon {
     int target;
     int lun;
     uint64_t host_features;
+    bool migratable;
 } VHostSCSICommon;
 
 int vhost_scsi_common_start(VHostSCSICommon *vsc);
diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c
index eb0cf9e131..6b01accf61 100644
--- a/hw/scsi/vhost-scsi.c
+++ b/hw/scsi/vhost-scsi.c
@@ -199,13 +199,18 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
         goto close_fd;
     }
 
-    error_setg(&vsc->migration_blocker,
-               "vhost-scsi does not support migration");
-    migrate_add_blocker(vsc->migration_blocker, &err);
-    if (err) {
-        error_propagate(errp, err);
-        error_free(vsc->migration_blocker);
-        goto close_fd;
+    if (!vsc->migratable) {
+        error_setg(&vsc->migration_blocker,
+                "vhost-scsi does not support migration in all cases. "
+                "When external environment supports it (Orchestrator migrates "
+                "target SCSI device state or use shared storage over network), "
+                "set 'migratable' property to true to enable migration.");
+        migrate_add_blocker(vsc->migration_blocker, &err);
+        if (err) {
+            error_propagate(errp, err);
+            error_free(vsc->migration_blocker);
+            goto close_fd;
+        }
     }
 
     vsc->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
@@ -230,7 +235,9 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
     return;
 
  free_vqs:
-    migrate_del_blocker(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+    }
     g_free(vsc->dev.vqs);
  close_fd:
     close(vhostfd);
@@ -243,8 +250,10 @@ static void vhost_scsi_unrealize(DeviceState *dev, Error **errp)
     VHostSCSICommon *vsc = VHOST_SCSI_COMMON(dev);
     struct vhost_virtqueue *vqs = vsc->dev.vqs;
 
-    migrate_del_blocker(vsc->migration_blocker);
-    error_free(vsc->migration_blocker);
+    if (!vsc->migratable) {
+        migrate_del_blocker(vsc->migration_blocker);
+        error_free(vsc->migration_blocker);
+    }
 
     /* This will stop vhost backend. */
     vhost_scsi_set_status(vdev, 0);
@@ -268,6 +277,7 @@ static Property vhost_scsi_properties[] = {
     DEFINE_PROP_BIT64("t10_pi", VHostSCSICommon, host_features,
                                                  VIRTIO_SCSI_F_T10_PI,
                                                  false),
+    DEFINE_PROP_BOOL("migratable", VHostSCSICommon, migratable, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
MST

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 789 bytes --]

On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> Hi,
> 
> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> 
> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> VM is stopped (As happens on migratino pre-copy completion).
> 
> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> 
> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> it's setup supports vhost-scsi migratino. For more detailed information on why
> this is valid, see commit message of specific patch.
> 
> Regards,
> -Liran

Looks fine for vhost_scsi.ko.  I have not checked how this interacts
with vhost-user-scsi.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 789 bytes --]

On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> Hi,
> 
> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> 
> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> VM is stopped (As happens on migratino pre-copy completion).
> 
> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> 
> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> it's setup supports vhost-scsi migratino. For more detailed information on why
> this is valid, see commit message of specific patch.
> 
> Regards,
> -Liran

Looks fine for vhost_scsi.ko.  I have not checked how this interacts
with vhost-user-scsi.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Liran Alon]

> On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> 
> On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
>> Hi,
>> 
>> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
>> 
>> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
>> VM is stopped (As happens on migratino pre-copy completion).
>> 
>> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
>> 
>> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
>> it's setup supports vhost-scsi migratino. For more detailed information on why
>> this is valid, see commit message of specific patch.
>> 
>> Regards,
>> -Liran
> 
> Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> with vhost-user-scsi.
> 
> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

Gentle Ping.

-Liran

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Liran Alon]

> On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> 
> On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
>> Hi,
>> 
>> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
>> 
>> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
>> VM is stopped (As happens on migratino pre-copy completion).
>> 
>> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
>> 
>> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
>> it's setup supports vhost-scsi migratino. For more detailed information on why
>> this is valid, see commit message of specific patch.
>> 
>> Regards,
>> -Liran
> 
> Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> with vhost-user-scsi.
> 
> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

Gentle Ping.

-Liran

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 1122 bytes --]

On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
> 
> 
> > On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> > 
> > On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> >> Hi,
> >> 
> >> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> >> 
> >> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> >> VM is stopped (As happens on migratino pre-copy completion).
> >> 
> >> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> >> 
> >> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> >> it's setup supports vhost-scsi migratino. For more detailed information on why
> >> this is valid, see commit message of specific patch.
> >> 
> >> Regards,
> >> -Liran
> > 
> > Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> > with vhost-user-scsi.
> > 
> > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
> 
> Gentle Ping.

This should go either through Michael's virtio/vhost tree or Paolo's
SCSI tree.

Stefan

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 1122 bytes --]

On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
> 
> 
> > On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> > 
> > On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> >> Hi,
> >> 
> >> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> >> 
> >> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> >> VM is stopped (As happens on migratino pre-copy completion).
> >> 
> >> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> >> 
> >> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> >> it's setup supports vhost-scsi migratino. For more detailed information on why
> >> this is valid, see commit message of specific patch.
> >> 
> >> Regards,
> >> -Liran
> > 
> > Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> > with vhost-user-scsi.
> > 
> > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
> 
> Gentle Ping.

This should go either through Michael's virtio/vhost tree or Paolo's
SCSI tree.

Stefan

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Michael S. Tsirkin]

On Thu, Apr 25, 2019 at 09:38:19AM +0100, Stefan Hajnoczi wrote:
> On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
> > 
> > 
> > > On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> > > 
> > > On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> > >> Hi,
> > >> 
> > >> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> > >> 
> > >> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> > >> VM is stopped (As happens on migratino pre-copy completion).
> > >> 
> > >> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> > >> 
> > >> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> > >> it's setup supports vhost-scsi migratino. For more detailed information on why
> > >> this is valid, see commit message of specific patch.
> > >> 
> > >> Regards,
> > >> -Liran
> > > 
> > > Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> > > with vhost-user-scsi.
> > > 
> > > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
> > 
> > Gentle Ping.
> 
> This should go either through Michael's virtio/vhost tree or Paolo's
> SCSI tree.
> 
> Stefan

OK I'll queue it.

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Michael S. Tsirkin]

On Thu, Apr 25, 2019 at 09:38:19AM +0100, Stefan Hajnoczi wrote:
> On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
> > 
> > 
> > > On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> > > 
> > > On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> > >> Hi,
> > >> 
> > >> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> > >> 
> > >> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> > >> VM is stopped (As happens on migratino pre-copy completion).
> > >> 
> > >> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> > >> 
> > >> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> > >> it's setup supports vhost-scsi migratino. For more detailed information on why
> > >> this is valid, see commit message of specific patch.
> > >> 
> > >> Regards,
> > >> -Liran
> > > 
> > > Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> > > with vhost-user-scsi.
> > > 
> > > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
> > 
> > Gentle Ping.
> 
> This should go either through Michael's virtio/vhost tree or Paolo's
> SCSI tree.
> 
> Stefan

OK I'll queue it.

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Liran Alon]

> On 25 Apr 2019, at 20:53, Michael S. Tsirkin <mst@redhat.com> wrote:
> 
> On Thu, Apr 25, 2019 at 09:38:19AM +0100, Stefan Hajnoczi wrote:
>> On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
>>> 
>>> 
>>>> On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
>>>> 
>>>> On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
>>>>> Hi,
>>>>> 
>>>>> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
>>>>> 
>>>>> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
>>>>> VM is stopped (As happens on migratino pre-copy completion).
>>>>> 
>>>>> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
>>>>> 
>>>>> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
>>>>> it's setup supports vhost-scsi migratino. For more detailed information on why
>>>>> this is valid, see commit message of specific patch.
>>>>> 
>>>>> Regards,
>>>>> -Liran
>>>> 
>>>> Looks fine for vhost_scsi.ko.  I have not checked how this interacts
>>>> with vhost-user-scsi.
>>>> 
>>>> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
>>> 
>>> Gentle Ping.
>> 
>> This should go either through Michael's virtio/vhost tree or Paolo's
>> SCSI tree.
>> 
>> Stefan
> 
> OK I'll queue it.

Thanks.
When is this expected to be merged to QEMU’s master?

-Liran

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Liran Alon]

Any news on when this patch-series is expected to be merged to upstream QEMU?
It was accepted 2 months ago.

Thanks,
-Liran 

> On 25 Apr 2019, at 20:53, Michael S. Tsirkin <mst@redhat.com> wrote:
> 
> On Thu, Apr 25, 2019 at 09:38:19AM +0100, Stefan Hajnoczi wrote:
>> On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
>>> 
>>> 
>>>> On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
>>>> 
>>>> On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
>>>>> Hi,
>>>>> 
>>>>> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
>>>>> 
>>>>> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
>>>>> VM is stopped (As happens on migratino pre-copy completion).
>>>>> 
>>>>> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
>>>>> 
>>>>> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
>>>>> it's setup supports vhost-scsi migratino. For more detailed information on why
>>>>> this is valid, see commit message of specific patch.
>>>>> 
>>>>> Regards,
>>>>> -Liran
>>>> 
>>>> Looks fine for vhost_scsi.ko.  I have not checked how this interacts
>>>> with vhost-user-scsi.
>>>> 
>>>> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
>>> 
>>> Gentle Ping.
>> 
>> This should go either through Michael's virtio/vhost tree or Paolo's
>> SCSI tree.
>> 
>> Stefan
> 
> OK I'll queue it.

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Michael S. Tsirkin]

On Mon, Jun 03, 2019 at 02:40:04AM +0300, Liran Alon wrote:
> Any news on when this patch-series is expected to be merged to upstream QEMU?
> It was accepted 2 months ago.
> 
> Thanks,
> -Liran 
> 
> > On 25 Apr 2019, at 20:53, Michael S. Tsirkin <mst@redhat.com> wrote:
> > 
> > On Thu, Apr 25, 2019 at 09:38:19AM +0100, Stefan Hajnoczi wrote:
> >> On Wed, Apr 24, 2019 at 07:38:57PM +0300, Liran Alon wrote:
> >>> 
> >>> 
> >>>> On 18 Apr 2019, at 12:41, Stefan Hajnoczi <stefanha@gmail.com> wrote:
> >>>> 
> >>>> On Tue, Apr 16, 2019 at 03:59:09PM +0300, Liran Alon wrote:
> >>>>> Hi,
> >>>>> 
> >>>>> This patch series aims to add supprot to migrate a VM with a vhost-scsi device.
> >>>>> 
> >>>>> The 1st patch fixes a bug of mistakenly not stopping vhost-scsi backend when a
> >>>>> VM is stopped (As happens on migratino pre-copy completion).
> >>>>> 
> >>>>> The 2nd patch adds ability to save/load vhost-scsi device state in VMState.
> >>>>> 
> >>>>> The 3rd and final paqtch adds a flag to vhost-scsi which allows admin to specify
> >>>>> it's setup supports vhost-scsi migratino. For more detailed information on why
> >>>>> this is valid, see commit message of specific patch.
> >>>>> 
> >>>>> Regards,
> >>>>> -Liran
> >>>> 
> >>>> Looks fine for vhost_scsi.ko.  I have not checked how this interacts
> >>>> with vhost-user-scsi.
> >>>> 
> >>>> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
> >>> 
> >>> Gentle Ping.
> >> 
> >> This should go either through Michael's virtio/vhost tree or Paolo's
> >> SCSI tree.
> >> 
> >> Stefan
> > 
> > OK I'll queue it.

Sorry dropped it by mistake after queueing and was not cc'd
so forgot to reapply. Queued now.

-- 
MST

Re: [Qemu-devel] [PATCH v2 0/3] vhost-scsi: Support migration

[Paolo Bonzini]

On 03/06/19 01:40, Liran Alon wrote:
> Any news on when this patch-series is expected to be merged to upstream QEMU?
> It was accepted 2 months ago.

It was merged on June 6th.

Paolo