From: Bin Meng <bmeng.cn@gmail.com>
To: Alistair Francis <Alistair.Francis@wdc.com>,
Bastian Koppelmann <kbastian@mail.uni-paderborn.de>,
Palmer Dabbelt <palmer@sifive.com>,
Sagar Karandikar <sagark@eecs.berkeley.edu>,
qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Subject: [Qemu-devel] [PATCH v2 19/28] riscv: sifive_u: Instantiate OTP memory with a serial number
Date: Wed, 7 Aug 2019 00:45:15 -0700 [thread overview]
Message-ID: <1565163924-18621-20-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1565163924-18621-1-git-send-email-bmeng.cn@gmail.com>
This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes in v2: None
hw/riscv/sifive_u.c | 5 +++++
include/hw/riscv/sifive_u.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index bddf892..7b4a684 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -10,6 +10,7 @@
* 1) CLINT (Core Level Interruptor)
* 2) PLIC (Platform Level Interrupt Controller)
* 3) PRCI (Power, Reset, Clock, Interrupt)
+ * 4) OTP (One-Time Programmable) memory with stored serial number
*
* This board currently generates devicetree dynamically that indicates at least
* two harts and up to five harts.
@@ -43,6 +44,7 @@
#include "hw/riscv/sifive_clint.h"
#include "hw/riscv/sifive_uart.h"
#include "hw/riscv/sifive_u.h"
+#include "hw/riscv/sifive_u_otp.h"
#include "hw/riscv/sifive_u_prci.h"
#include "hw/riscv/boot.h"
#include "chardev/char.h"
@@ -65,10 +67,12 @@ static const struct MemmapEntry {
[SIFIVE_U_PRCI] = { 0x10000000, 0x1000 },
[SIFIVE_U_UART0] = { 0x10010000, 0x1000 },
[SIFIVE_U_UART1] = { 0x10011000, 0x1000 },
+ [SIFIVE_U_OTP] = { 0x10070000, 0x1000 },
[SIFIVE_U_DRAM] = { 0x80000000, 0x0 },
[SIFIVE_U_GEM] = { 0x100900FC, 0x2000 },
};
+#define SIFIVE_OTP_SERIAL 1
#define GEM_REVISION 0x10070109
static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
@@ -441,6 +445,7 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
memmap[SIFIVE_U_CLINT].size, ms->smp.cpus,
SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
sifive_u_prci_create(memmap[SIFIVE_U_PRCI].base);
+ sifive_u_otp_create(memmap[SIFIVE_U_OTP].base, SIFIVE_OTP_SERIAL);
for (i = 0; i < SIFIVE_U_PLIC_NUM_SOURCES; i++) {
plic_gpios[i] = qdev_get_gpio_in(DEVICE(s->plic), i);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 19d5a6f..2f475c5 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -54,6 +54,7 @@ enum {
SIFIVE_U_PRCI,
SIFIVE_U_UART0,
SIFIVE_U_UART1,
+ SIFIVE_U_OTP,
SIFIVE_U_DRAM,
SIFIVE_U_GEM
};
--
2.7.4
next prev parent reply other threads:[~2019-08-07 7:55 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-07 7:44 [Qemu-devel] [PATCH v2 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
2019-08-07 7:44 ` [Qemu-devel] [PATCH v2 01/28] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
2019-08-07 7:44 ` [Qemu-devel] [PATCH v2 02/28] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Bin Meng
2019-08-07 7:44 ` [Qemu-devel] [PATCH v2 03/28] riscv: Add a sifive_cpu.h to include both E and U cpu type defines Bin Meng
2019-08-07 9:50 ` Philippe Mathieu-Daudé
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 04/28] riscv: hart: Extract hart realize to a separate routine Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 05/28] riscv: hart: Support heterogeneous harts population Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 06/28] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 07/28] riscv: sifive_u: Set the minimum number of cpus to 2 Bin Meng
2019-08-07 9:46 ` Philippe Mathieu-Daudé
2019-08-07 10:05 ` Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 08/28] riscv: sifive_u: Update PLIC hart topology configuration string Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 09/28] riscv: sifive_u: Update UART base addresses Bin Meng
2019-08-07 9:25 ` Chih-Min Chao
2019-08-07 9:38 ` Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 10/28] riscv: sifive_u: Remove the unnecessary include of prci header Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 11/28] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Bin Meng
2019-08-07 8:54 ` Chih-Min Chao
2019-08-07 10:10 ` Bin Meng
2019-08-08 14:00 ` Chih-Min Chao
2019-08-10 1:51 ` Alistair Francis
[not found] ` <CAEUhbmWENVV+DzX756OCUGYc5ES-aCdD8tpSoVoPspniuiGh2A@mail.gmail.com>
2019-08-11 17:06 ` Alistair Francis
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 12/28] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming Bin Meng
2019-08-07 8:59 ` Chih-Min Chao
2019-08-07 9:49 ` Philippe Mathieu-Daudé
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 13/28] riscv: sifive_e: prci: Update the PRCI register block size Bin Meng
2019-08-07 9:00 ` Chih-Min Chao
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 14/28] riscv: sifive: Implement PRCI model for FU540 Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 15/28] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 16/28] riscv: sifive_u: Add PRCI block to the SoC Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 17/28] riscv: sifive_u: Change UART node name in device tree Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 18/28] riscv: hw: Implement a model for SiFive FU540 OTP Bin Meng
2019-08-07 7:45 ` Bin Meng [this message]
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 21/28] riscv: sifive_u: Update UART and ethernet node clock properties Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 22/28] riscv: sifive_u: Generate an aliases node in the device tree Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 23/28] riscv: sifive_u: Fix broken GEM support Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 24/28] riscv: sifive_u: Support loading initramfs Bin Meng
2019-08-07 9:04 ` Chih-Min Chao
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 25/28] riscv: hw: Remove not needed PLIC properties in device tree Bin Meng
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 27/28] riscv: virt: Change create_fdt() to return void Bin Meng
2019-08-07 9:04 ` [Qemu-devel] [Qemu-riscv] " Chih-Min Chao
2019-08-07 9:48 ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-08-07 7:45 ` [Qemu-devel] [PATCH v2 28/28] riscv: sifive_u: Update model and compatible strings in device tree Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565163924-18621-20-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=Alistair.Francis@wdc.com \
--cc=kbastian@mail.uni-paderborn.de \
--cc=palmer@sifive.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=sagark@eecs.berkeley.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).