From: Bin Meng <bmeng.cn@gmail.com>
To: Alistair Francis <Alistair.Francis@wdc.com>,
Palmer Dabbelt <palmer@sifive.com>,
qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Subject: [Qemu-devel] [PATCH v8 30/32] riscv: sifive_u: Fix broken GEM support
Date: Fri, 6 Sep 2019 09:20:17 -0700 [thread overview]
Message-ID: <1567786819-22142-31-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1567786819-22142-1-git-send-email-bmeng.cn@gmail.com>
At present the GEM support in sifive_u machine is seriously broken.
The GEM block register base was set to a weird number (0x100900FC),
which for no way could work with the cadence_gem model in QEMU.
Not like other GEM variants, the FU540-specific GEM has a management
block to control 10/100/1000Mbps link speed changes, that is mapped
to 0x100a0000. We can simply map it into MMIO space without special
handling using create_unimplemented_device().
Update the GEM node compatible string to use the official name used
by the upstream Linux kernel, and add the management block reg base
& size to the <reg> property encoding.
Tested with upstream U-Boot and Linux kernel MACB drivers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---
Changes in v8:
- select UNIMP in sifive_u Kconfig due to applied commit
"hw/misc: Add a config switch for the "unimplemented" device"
in latest qemu/master
Changes in v7: None
Changes in v6: None
Changes in v5:
- add the missing "local-mac-address" property in the ethernet node
Changes in v4: None
Changes in v3: None
Changes in v2:
- use create_unimplemented_device() to create the GEM management
block instead of sifive_mmio_emulate()
- add "phy-handle" property to the ethernet node
hw/riscv/Kconfig | 1 +
hw/riscv/sifive_u.c | 24 ++++++++++++++++++++----
include/hw/riscv/sifive_u.h | 3 ++-
3 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 33e54b0..fb19b2d 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -19,6 +19,7 @@ config SIFIVE_U
select CADENCE
select HART
select SIFIVE
+ select UNIMP
config SPIKE
bool
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 4803e47..3b61fab 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -3,6 +3,7 @@
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017 SiFive, Inc.
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
*
* Provides a board compatible with the SiFive Freedom U SDK:
*
@@ -11,6 +12,7 @@
* 2) PLIC (Platform Level Interrupt Controller)
* 3) PRCI (Power, Reset, Clock, Interrupt)
* 4) OTP (One-Time Programmable) memory with stored serial number
+ * 5) GEM (Gigabit Ethernet Controller) and management block
*
* This board currently generates devicetree dynamically that indicates at least
* two harts and up to five harts.
@@ -37,6 +39,7 @@
#include "hw/sysbus.h"
#include "hw/char/serial.h"
#include "hw/cpu/cluster.h"
+#include "hw/misc/unimp.h"
#include "target/riscv/cpu.h"
#include "hw/riscv/riscv_hart.h"
#include "hw/riscv/sifive_plic.h"
@@ -45,6 +48,7 @@
#include "hw/riscv/sifive_u.h"
#include "hw/riscv/boot.h"
#include "chardev/char.h"
+#include "net/eth.h"
#include "sysemu/arch_init.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
@@ -67,7 +71,8 @@ static const struct MemmapEntry {
[SIFIVE_U_UART1] = { 0x10011000, 0x1000 },
[SIFIVE_U_OTP] = { 0x10070000, 0x1000 },
[SIFIVE_U_DRAM] = { 0x80000000, 0x0 },
- [SIFIVE_U_GEM] = { 0x100900FC, 0x2000 },
+ [SIFIVE_U_GEM] = { 0x10090000, 0x2000 },
+ [SIFIVE_U_GEM_MGMT] = { 0x100a0000, 0x1000 },
};
#define OTP_SERIAL 1
@@ -84,7 +89,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
char ethclk_names[] = "pclk\0hclk";
uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
uint32_t uartclk_phandle;
- uint32_t hfclk_phandle, rtcclk_phandle;
+ uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
fdt = s->fdt = create_device_tree(&s->fdt_size);
if (!fdt) {
@@ -254,21 +259,28 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
ethclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
g_free(nodename);
+ phy_phandle = phandle++;
nodename = g_strdup_printf("/soc/ethernet@%lx",
(long)memmap[SIFIVE_U_GEM].base);
qemu_fdt_add_subnode(fdt, nodename);
- qemu_fdt_setprop_string(fdt, nodename, "compatible", "cdns,macb");
+ qemu_fdt_setprop_string(fdt, nodename, "compatible",
+ "sifive,fu540-c000-gem");
qemu_fdt_setprop_cells(fdt, nodename, "reg",
0x0, memmap[SIFIVE_U_GEM].base,
- 0x0, memmap[SIFIVE_U_GEM].size);
+ 0x0, memmap[SIFIVE_U_GEM].size,
+ 0x0, memmap[SIFIVE_U_GEM_MGMT].base,
+ 0x0, memmap[SIFIVE_U_GEM_MGMT].size);
qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
+ qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
qemu_fdt_setprop_cells(fdt, nodename, "clocks",
prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
sizeof(ethclk_names));
+ qemu_fdt_setprop(fdt, nodename, "local-mac-address",
+ s->soc.gem.conf.macaddr.a, ETH_ALEN);
qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
g_free(nodename);
@@ -276,6 +288,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
(long)memmap[SIFIVE_U_GEM].base);
qemu_fdt_add_subnode(fdt, nodename);
+ qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
g_free(nodename);
@@ -525,6 +538,9 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_GEM].base);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
plic_gpios[SIFIVE_U_GEM_IRQ]);
+
+ create_unimplemented_device("riscv.sifive.u.gem-mgmt",
+ memmap[SIFIVE_U_GEM_MGMT].base, memmap[SIFIVE_U_GEM_MGMT].size);
}
static void riscv_sifive_u_machine_init(MachineClass *mc)
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 4d4733c..5270851 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -64,7 +64,8 @@ enum {
SIFIVE_U_UART1,
SIFIVE_U_OTP,
SIFIVE_U_DRAM,
- SIFIVE_U_GEM
+ SIFIVE_U_GEM,
+ SIFIVE_U_GEM_MGMT
};
enum {
--
2.7.4
next prev parent reply other threads:[~2019-09-06 16:49 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 16:19 [Qemu-devel] [PATCH v8 00/32] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 01/32] riscv: hw: Remove duplicated "hw/hw.h" inclusion Bin Meng
2019-09-06 21:20 ` Alistair Francis
2019-09-09 16:20 ` Palmer Dabbelt
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 02/32] riscv: sifive_test: Add reset functionality Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 03/32] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 04/32] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 05/32] riscv: hw: Remove not needed PLIC properties in device tree Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 06/32] riscv: hw: Change create_fdt() to return void Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 07/32] riscv: hw: Change to use qemu_log_mask(LOG_GUEST_ERROR, ...) instead Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 08/32] riscv: hw: Remove the unnecessary include of target/riscv/cpu.h Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 09/32] riscv: roms: Remove executable attribute of opensbi images Bin Meng
2019-09-06 16:25 ` Philippe Mathieu-Daudé
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 10/32] riscv: sifive_u: Remove the unnecessary include of prci header Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 11/32] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Bin Meng
2019-09-06 16:19 ` [Qemu-devel] [PATCH v8 12/32] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 13/32] riscv: sifive_e: prci: Update the PRCI register block size Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 14/32] riscv: sifive_e: Drop sifive_mmio_emulate() Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 15/32] riscv: Add a sifive_cpu.h to include both E and U cpu type defines Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 16/32] riscv: hart: Extract hart realize to a separate routine Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 17/32] riscv: hart: Add a "hartid-base" property to RISC-V hart array Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 18/32] riscv: sifive_u: Set the minimum number of cpus to 2 Bin Meng
2019-09-13 14:33 ` Palmer Dabbelt
2019-09-13 15:25 ` Bin Meng
2019-09-14 19:00 ` Palmer Dabbelt
2019-09-15 13:07 ` Bin Meng
2019-09-15 17:31 ` Palmer Dabbelt
2019-09-15 17:39 ` [Qemu-devel] [Qemu-riscv] " Jonathan Behrens
2019-09-15 22:16 ` Palmer Dabbelt
2019-09-16 7:51 ` Bin Meng
2019-09-16 17:02 ` [Qemu-devel] " Alistair Francis
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 19/32] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 20/32] riscv: sifive_u: Update PLIC hart topology configuration string Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 21/32] riscv: sifive: Implement PRCI model for FU540 Bin Meng
2019-09-09 16:20 ` Palmer Dabbelt
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 22/32] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 23/32] riscv: sifive_u: Add PRCI block to the SoC Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 24/32] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 25/32] riscv: sifive_u: Update UART base addresses and IRQs Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 26/32] riscv: sifive_u: Change UART node name in device tree Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 27/32] riscv: roms: Update default bios for sifive_u machine Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 28/32] riscv: sifive: Implement a model for SiFive FU540 OTP Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 29/32] riscv: sifive_u: Instantiate OTP memory with a serial number Bin Meng
2019-09-06 16:20 ` Bin Meng [this message]
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 31/32] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet Bin Meng
2019-09-06 16:20 ` [Qemu-devel] [PATCH v8 32/32] riscv: sifive_u: Update model and compatible strings in device tree Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567786819-22142-31-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=Alistair.Francis@wdc.com \
--cc=palmer@sifive.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).