[PATCH 008/132] meson: use coverage option

[Paolo Bonzini <pbonzini@redhat.com>]

From: Marc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
 Makefile               | 14 --------------
 Makefile.target        | 16 ----------------
 configure              | 10 ++--------
 docs/devel/testing.rst |  7 +++----
 4 files changed, 5 insertions(+), 42 deletions(-)

diff --git a/Makefile b/Makefile
index 44daed6..292da1f 100644
--- a/Makefile
+++ b/Makefile
@@ -661,14 +661,6 @@ module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
 	$(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
 	"GEN","$@")
 
-ifdef CONFIG_GCOV
-.PHONY: clean-coverage
-clean-coverage:
-	$(call quiet-command, \
-		find . \( -name '*.gcda' -o -name '*.gcov' \) -type f -exec rm {} +, \
-		"CLEAN", "coverage files")
-endif
-
 clean: recurse-clean
 # avoid old build problems by removing potentially incorrect old files
 	rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
@@ -1150,9 +1142,6 @@ endif
 		echo '')
 	@echo  'Cleaning targets:'
 	@echo  '  clean           - Remove most generated files but keep the config'
-ifdef CONFIG_GCOV
-	@echo  '  clean-coverage  - Remove coverage files'
-endif
 	@echo  '  distclean       - Remove all generated files'
 	@echo  '  dist            - Build a distributable tarball'
 	@echo  ''
@@ -1164,9 +1153,6 @@ endif
 	@echo  'Documentation targets:'
 	@echo  '  html info pdf txt'
 	@echo  '                  - Build documentation in specified format'
-ifdef CONFIG_GCOV
-	@echo  '  coverage-report - Create code coverage report'
-endif
 	@echo  ''
 ifdef CONFIG_WIN32
 	@echo  'Windows targets:'
diff --git a/Makefile.target b/Makefile.target
index 532e4ab..f4b44af 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -238,19 +238,3 @@ endif
 
 generated-files-y += config-target.h
 Makefile: $(generated-files-y)
-
-# Reports/Analysis
-#
-# The target specific coverage report only cares about target specific
-# blobs and not the shared code.
-#
-
-%/coverage-report.html:
-	@mkdir -p $*
-	$(call quiet-command,\
-		gcovr -r $(SRC_PATH) --object-directory $(CURDIR) \
-		-p --html --html-details -o $@, \
-		"GEN", "coverage-report.html")
-
-.PHONY: coverage-report
-coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
diff --git a/configure b/configure
index 80055f1..5112683 100755
--- a/configure
+++ b/configure
@@ -417,7 +417,6 @@ tcg_interpreter="no"
 bigendian="no"
 mingw32="no"
 gcov="no"
-gcov_tool="gcov"
 EXESUF=""
 DSOSUF=".so"
 LDFLAGS_SHARED="-shared"
@@ -973,8 +972,6 @@ for opt do
   ;;
   --meson=*) meson="$optarg"
   ;;
-  --gcov=*) gcov_tool="$optarg"
-  ;;
   --smbd=*) smbd="$optarg"
   ;;
   --extra-cflags=*)
@@ -1720,7 +1717,6 @@ Advanced options (experts only):
   --with-coroutine=BACKEND coroutine backend. Supported options:
                            ucontext, sigaltstack, windows
   --enable-gcov            enable test coverage analysis with gcov
-  --gcov=GCOV              use specified gcov [$gcov_tool]
   --disable-blobs          disable installing provided firmware blobs
   --with-vss-sdk=SDK-path  enable Windows VSS support in QEMU Guest Agent
   --with-win-sdk=SDK-path  path to Windows Platform SDK (to build VSS .tlb)
@@ -5967,8 +5963,7 @@ esac
 write_c_skeleton
 
 if test "$gcov" = "yes" ; then
-  CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS"
-  LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS"
+  :
 elif test "$fortify_source" = "yes" ; then
   CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
 elif test "$debug" = "no"; then
@@ -6434,7 +6429,6 @@ echo "debug stack usage $debug_stack_usage"
 echo "mutex debugging   $debug_mutex"
 echo "crypto afalg      $crypto_afalg"
 echo "GlusterFS support $glusterfs"
-echo "gcov              $gcov_tool"
 echo "gcov enabled      $gcov"
 echo "TPM support       $tpm"
 echo "libssh support    $libssh"
@@ -7359,7 +7353,6 @@ echo "TASN1_CFLAGS=$tasn1_cflags" >> $config_host_mak
 echo "POD2MAN=$POD2MAN" >> $config_host_mak
 if test "$gcov" = "yes" ; then
   echo "CONFIG_GCOV=y" >> $config_host_mak
-  echo "GCOV=$gcov_tool" >> $config_host_mak
 fi
 
 if test "$libudev" != "no"; then
@@ -7942,6 +7935,7 @@ NINJA=$PWD/ninjatool $python $meson setup \
 	$(test "$strip_opt" = yes && echo --strip) \
 	--buildtype $(if test "$debug" = yes; then echo debug; else echo debugoptimized; fi) \
         -Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \
+        -Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
         $cross_arg \
 	"$PWD" "$source_path"
 
diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
index bf75675..c81ed35 100644
--- a/docs/devel/testing.rst
+++ b/docs/devel/testing.rst
@@ -163,13 +163,12 @@ instrumenting the tested code. To use it, configure QEMU with
 ``--enable-gcov`` option and build. Then run ``make check`` as usual.
 
 If you want to gather coverage information on a single test the ``make
-clean-coverage`` target can be used to delete any existing coverage
+clean-gcda`` target can be used to delete any existing coverage
 information before running a single test.
 
 You can generate a HTML coverage report by executing ``make
-coverage-report`` which will create
-./reports/coverage/coverage-report.html. If you want to create it
-elsewhere simply execute ``make /foo/bar/baz/coverage-report.html``.
+coverage-html`` which will create
+``meson-logs/coveragereport/index.html``.
 
 Further analysis can be conducted by running the ``gcov`` command
 directly on the various .gcda output files. Please read the ``gcov``
-- 
1.8.3.1