From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PULL 58/87] hw/i386/pc: Extract the port92 device
Date: Wed, 18 Dec 2019 13:02:24 +0100 [thread overview]
Message-ID: <1576670573-48048-59-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1576670573-48048-1-git-send-email-pbonzini@redhat.com>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
This device is only used by the PC machines. The pc.c file is
already big enough, with 2255 lines. By removing 113 lines of
it, we reduced it by 5%. It is now a bit easier to navigate
the file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/i386/Makefile.objs | 1 +
hw/i386/pc.c | 113 --------------------------------------------
hw/i386/port92.c | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++
hw/i386/trace-events | 2 +-
include/hw/i386/pc.h | 3 ++
5 files changed, 131 insertions(+), 114 deletions(-)
create mode 100644 hw/i386/port92.c
diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs
index 1236c3b..8ce1b26 100644
--- a/hw/i386/Makefile.objs
+++ b/hw/i386/Makefile.objs
@@ -13,6 +13,7 @@ obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o
obj-$(CONFIG_XEN) += ../xenpv/ xen/
obj-$(CONFIG_VMPORT) += vmport.o
obj-$(CONFIG_VMMOUSE) += vmmouse.o
+obj-$(CONFIG_PC) += port92.o
obj-y += kvmvapic.o
obj-$(CONFIG_PC) += acpi-build.o
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index e36053f..42014b0 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -673,119 +673,6 @@ void pc_cmos_init(PCMachineState *pcms,
qemu_register_reset(pc_cmos_init_late, &arg);
}
-#define TYPE_PORT92 "port92"
-#define PORT92(obj) OBJECT_CHECK(Port92State, (obj), TYPE_PORT92)
-
-/* port 92 stuff: could be split off */
-typedef struct Port92State {
- ISADevice parent_obj;
-
- MemoryRegion io;
- uint8_t outport;
- qemu_irq a20_out;
-} Port92State;
-
-static void port92_write(void *opaque, hwaddr addr, uint64_t val,
- unsigned size)
-{
- Port92State *s = opaque;
- int oldval = s->outport;
-
- trace_port92_write(val);
- s->outport = val;
- qemu_set_irq(s->a20_out, (val >> 1) & 1);
- if ((val & 1) && !(oldval & 1)) {
- qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
- }
-}
-
-static uint64_t port92_read(void *opaque, hwaddr addr,
- unsigned size)
-{
- Port92State *s = opaque;
- uint32_t ret;
-
- ret = s->outport;
- trace_port92_read(ret);
- return ret;
-}
-
-static const VMStateDescription vmstate_port92_isa = {
- .name = "port92",
- .version_id = 1,
- .minimum_version_id = 1,
- .fields = (VMStateField[]) {
- VMSTATE_UINT8(outport, Port92State),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static void port92_reset(DeviceState *d)
-{
- Port92State *s = PORT92(d);
-
- s->outport &= ~1;
-}
-
-static const MemoryRegionOps port92_ops = {
- .read = port92_read,
- .write = port92_write,
- .impl = {
- .min_access_size = 1,
- .max_access_size = 1,
- },
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
-static void port92_initfn(Object *obj)
-{
- Port92State *s = PORT92(obj);
-
- memory_region_init_io(&s->io, OBJECT(s), &port92_ops, s, "port92", 1);
-
- s->outport = 0;
-
- qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, PORT92_A20_LINE, 1);
-}
-
-static void port92_realizefn(DeviceState *dev, Error **errp)
-{
- ISADevice *isadev = ISA_DEVICE(dev);
- Port92State *s = PORT92(dev);
-
- isa_register_ioport(isadev, &s->io, 0x92);
-}
-
-static void port92_class_initfn(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
-
- dc->realize = port92_realizefn;
- dc->reset = port92_reset;
- dc->vmsd = &vmstate_port92_isa;
- /*
- * Reason: unlike ordinary ISA devices, this one needs additional
- * wiring: its A20 output line needs to be wired up with
- * qdev_connect_gpio_out_named().
- */
- dc->user_creatable = false;
-}
-
-static const TypeInfo port92_info = {
- .name = TYPE_PORT92,
- .parent = TYPE_ISA_DEVICE,
- .instance_size = sizeof(Port92State),
- .instance_init = port92_initfn,
- .class_init = port92_class_initfn,
-};
-
-static void port92_register_types(void)
-{
- type_register_static(&port92_info);
-}
-
-type_init(port92_register_types)
-
static void handle_a20_line_change(void *opaque, int irq, int level)
{
X86CPU *cpu = opaque;
diff --git a/hw/i386/port92.c b/hw/i386/port92.c
new file mode 100644
index 0000000..19866c4
--- /dev/null
+++ b/hw/i386/port92.c
@@ -0,0 +1,126 @@
+/*
+ * QEMU I/O port 0x92 (System Control Port A, to handle Fast Gate A20)
+ *
+ * Copyright (c) 2003-2004 Fabrice Bellard
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "qemu/osdep.h"
+#include "sysemu/runstate.h"
+#include "migration/vmstate.h"
+#include "hw/irq.h"
+#include "hw/i386/pc.h"
+#include "trace.h"
+
+#define PORT92(obj) OBJECT_CHECK(Port92State, (obj), TYPE_PORT92)
+
+typedef struct Port92State {
+ ISADevice parent_obj;
+
+ MemoryRegion io;
+ uint8_t outport;
+ qemu_irq a20_out;
+} Port92State;
+
+static void port92_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ Port92State *s = opaque;
+ int oldval = s->outport;
+
+ trace_port92_write(val);
+ s->outport = val;
+ qemu_set_irq(s->a20_out, (val >> 1) & 1);
+ if ((val & 1) && !(oldval & 1)) {
+ qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
+ }
+}
+
+static uint64_t port92_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ Port92State *s = opaque;
+ uint32_t ret;
+
+ ret = s->outport;
+ trace_port92_read(ret);
+
+ return ret;
+}
+
+static const VMStateDescription vmstate_port92_isa = {
+ .name = "port92",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(outport, Port92State),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void port92_reset(DeviceState *d)
+{
+ Port92State *s = PORT92(d);
+
+ s->outport &= ~1;
+}
+
+static const MemoryRegionOps port92_ops = {
+ .read = port92_read,
+ .write = port92_write,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void port92_initfn(Object *obj)
+{
+ Port92State *s = PORT92(obj);
+
+ memory_region_init_io(&s->io, OBJECT(s), &port92_ops, s, "port92", 1);
+
+ s->outport = 0;
+
+ qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, PORT92_A20_LINE, 1);
+}
+
+static void port92_realizefn(DeviceState *dev, Error **errp)
+{
+ ISADevice *isadev = ISA_DEVICE(dev);
+ Port92State *s = PORT92(dev);
+
+ isa_register_ioport(isadev, &s->io, 0x92);
+}
+
+static void port92_class_initfn(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = port92_realizefn;
+ dc->reset = port92_reset;
+ dc->vmsd = &vmstate_port92_isa;
+ /*
+ * Reason: unlike ordinary ISA devices, this one needs additional
+ * wiring: its A20 output line needs to be wired up with
+ * qdev_connect_gpio_out_named().
+ */
+ dc->user_creatable = false;
+}
+
+static const TypeInfo port92_info = {
+ .name = TYPE_PORT92,
+ .parent = TYPE_ISA_DEVICE,
+ .instance_size = sizeof(Port92State),
+ .instance_init = port92_initfn,
+ .class_init = port92_class_initfn,
+};
+
+static void port92_register_types(void)
+{
+ type_register_static(&port92_info);
+}
+
+type_init(port92_register_types)
diff --git a/hw/i386/trace-events b/hw/i386/trace-events
index a9b6437..e48bef2 100644
--- a/hw/i386/trace-events
+++ b/hw/i386/trace-events
@@ -116,6 +116,6 @@ vmport_command(unsigned char command) "command: 0x%02x"
x86_gsi_interrupt(int irqn, int level) "GSI interrupt #%d level:%d"
x86_pic_interrupt(int irqn, int level) "PIC interrupt #%d level:%d"
-# pc.c
+# port92.c
port92_read(uint8_t val) "port92: read 0x%02x"
port92_write(uint8_t val) "port92: write 0x%02x"
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 58aaa23..d5ac76d 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -196,8 +196,11 @@ void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs);
ISADevice *pc_find_fdc0(void);
int cmos_get_fd_drive_type(FloppyDriveType fd0);
+/* port92.c */
#define PORT92_A20_LINE "a20"
+#define TYPE_PORT92 "port92"
+
/* pc_sysfw.c */
void pc_system_flash_create(PCMachineState *pcms);
void pc_system_firmware_init(PCMachineState *pcms, MemoryRegion *rom_memory);
--
1.8.3.1
next prev parent reply other threads:[~2019-12-18 12:33 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 12:01 [PULL 00/87] Misc patches for 2019-12-18 Paolo Bonzini
2019-12-18 12:01 ` [PULL 01/87] kvm: Reallocate dirty_bmap when we change a slot Paolo Bonzini
2019-12-18 12:01 ` [PULL 02/87] migration-test: Create cmd_soure and cmd_target Paolo Bonzini
2019-12-18 12:01 ` [PULL 03/87] migration-test: Move hide_stderr to common commandline Paolo Bonzini
2019-12-18 12:01 ` [PULL 04/87] migration-test: Move -machine " Paolo Bonzini
2019-12-18 12:01 ` [PULL 05/87] migration-test: Move memory size " Paolo Bonzini
2019-12-18 12:01 ` [PULL 06/87] migration-test: Move shmem handling " Paolo Bonzini
2019-12-18 12:01 ` [PULL 07/87] migration-test: Move -name " Paolo Bonzini
2019-12-18 12:01 ` [PULL 08/87] migration-test: Move -serial " Paolo Bonzini
2019-12-18 12:01 ` [PULL 09/87] migration-test: Move -incomming " Paolo Bonzini
2019-12-18 12:01 ` [PULL 10/87] migration-test: Rename cmd_src/dst to arch_source/arch_target Paolo Bonzini
2019-12-18 12:01 ` [PULL 11/87] migration-test: Use a struct for test_migrate_start parameters Paolo Bonzini
2019-12-18 12:01 ` [PULL 12/87] memory: do not look at current_machine->accel Paolo Bonzini
2019-12-18 12:01 ` [PULL 13/87] vl: move icount configuration earlier Paolo Bonzini
2019-12-18 12:01 ` [PULL 14/87] tcg: move qemu_tcg_configure to accel/tcg/tcg-all.c Paolo Bonzini
2019-12-18 12:01 ` [PULL 15/87] vl: extract accelerator option processing to a separate function Paolo Bonzini
2019-12-18 12:01 ` [PULL 16/87] vl: merge -accel processing into configure_accelerators Paolo Bonzini
2019-12-18 12:01 ` [PULL 17/87] accel: compile accel/accel.c just once Paolo Bonzini
2019-12-18 12:01 ` [PULL 18/87] vl: introduce object_parse_property_opt Paolo Bonzini
2019-12-18 12:01 ` [PULL 19/87] vl: configure accelerators from -accel options Paolo Bonzini
2019-12-18 12:01 ` [PULL 20/87] vl: warn for unavailable accelerators, clarify messages Paolo Bonzini
2020-01-16 14:50 ` Laurent Vivier
2020-01-16 15:10 ` Paolo Bonzini
2019-12-18 12:01 ` [PULL 21/87] qom: introduce object_register_sugar_prop Paolo Bonzini
2019-12-18 12:01 ` [PULL 22/87] qom: add object_new_with_class Paolo Bonzini
2019-12-18 12:01 ` [PULL 23/87] accel: pass object to accel_init_machine Paolo Bonzini
2019-12-18 12:01 ` [PULL 24/87] tcg: convert "-accel threads" to a QOM property Paolo Bonzini
2019-12-18 12:01 ` [PULL 25/87] tcg: add "-accel tcg,tb-size" and deprecate "-tb-size" Paolo Bonzini
2019-12-18 12:01 ` [PULL 26/87] xen: convert "-machine igd-passthru" to an accelerator property Paolo Bonzini
2019-12-18 12:01 ` [PULL 27/87] kvm: convert "-machine kvm_shadow_mem" " Paolo Bonzini
2019-12-18 12:01 ` [PULL 28/87] kvm: introduce kvm_kernel_irqchip_* functions Paolo Bonzini
2019-12-18 12:01 ` [PULL 29/87] kvm: convert "-machine kernel_irqchip" to an accelerator property Paolo Bonzini
2020-01-07 14:46 ` Peter Maydell
2020-01-07 16:18 ` Paolo Bonzini
2019-12-18 12:01 ` [PULL 30/87] Makefile: remove unused variables Paolo Bonzini
2019-12-18 12:01 ` [PULL 31/87] object: Improve documentation of interfaces Paolo Bonzini
2019-12-18 12:01 ` [PULL 32/87] build-sys: build vhost-user-gpu only if CONFIG_TOOLS Paolo Bonzini
2019-12-18 12:01 ` [PULL 33/87] build-sys: do not include Windows SLIRP dependencies in $LIBS Paolo Bonzini
2019-12-18 12:02 ` [PULL 34/87] migration: fix maybe-uninitialized warning Paolo Bonzini
2019-12-18 12:02 ` [PULL 35/87] monitor: fix maybe-uninitialized Paolo Bonzini
2019-12-18 12:02 ` [PULL 36/87] vhost-user-scsi: fix printf format warning Paolo Bonzini
2019-12-18 12:02 ` [PULL 37/87] os-posix: simplify os_find_datadir Paolo Bonzini
2019-12-18 12:02 ` [PULL 38/87] tests: skip block layer tests if !CONFIG_TOOLS Paolo Bonzini
2019-12-18 12:02 ` [PULL 39/87] libvixl: remove per-target compiler flags Paolo Bonzini
2019-12-18 12:02 ` [PULL 40/87] crypto: move common bits for all emulators to libqemuutil Paolo Bonzini
2019-12-18 12:02 ` [PULL 41/87] stubs: replace stubs with lnot if applicable Paolo Bonzini
2019-12-18 12:02 ` [PULL 42/87] configure: set $PYTHON to a full path Paolo Bonzini
2019-12-18 12:02 ` [PULL 43/87] configure: simplify vhost condition with Kconfig Paolo Bonzini
2019-12-18 12:02 ` [PULL 44/87] i386: conditionally compile more files Paolo Bonzini
2019-12-18 12:02 ` [PULL 45/87] fw_cfg: allow building without other devices Paolo Bonzini
2019-12-18 12:02 ` [PULL 46/87] hw: replace hw/i386/pc.h with a header just for the i8259 Paolo Bonzini
2019-12-18 12:02 ` [PULL 47/87] pci-stub: add more MSI functions Paolo Bonzini
2019-12-18 12:02 ` [PULL 48/87] x86: move SMM property to X86MachineState Paolo Bonzini
2019-12-23 11:28 ` Michal Prívozník
2019-12-23 11:33 ` Daniel P. Berrangé
2019-12-23 11:40 ` Michal Prívozník
2019-12-23 13:38 ` Paolo Bonzini
2019-12-23 14:46 ` Michal Prívozník
2019-12-18 12:02 ` [PULL 49/87] hw/i386/pc: Convert DPRINTF() to trace events Paolo Bonzini
2019-12-18 12:02 ` [PULL 50/87] x86: move more x86-generic functions out of PC files Paolo Bonzini
2019-12-18 12:02 ` [PULL 51/87] acpi: move PC stubs out of stubs/ Paolo Bonzini
2019-12-18 12:02 ` [PULL 52/87] pc: stubify x86 iommu Paolo Bonzini
2019-12-18 12:02 ` [PULL 53/87] hw/i386: De-duplicate gsi_handler() to remove kvm_pc_gsi_handler() Paolo Bonzini
2019-12-18 12:02 ` [PULL 54/87] hw/i386: Simplify ioapic_init_gsi() Paolo Bonzini
2019-12-18 12:02 ` [PULL 55/87] hw/isa/isa-bus: cleanup irq functions Paolo Bonzini
2019-12-18 12:02 ` [PULL 56/87] hw/i386/pc: Use TYPE_PORT92 instead of hardcoded string Paolo Bonzini
2019-12-18 12:02 ` [PULL 57/87] hw/i386/pc: Inline port92_init() Paolo Bonzini
2019-12-18 12:02 ` Paolo Bonzini [this message]
2019-12-18 12:02 ` [PULL 59/87] hyperv: Use auto rcu_read macros Paolo Bonzini
2019-12-18 12:02 ` [PULL 60/87] qsp: Use WITH_RCU_READ_LOCK_GUARD Paolo Bonzini
2019-12-18 12:02 ` [PULL 61/87] memory: use RCU_READ_LOCK_GUARD Paolo Bonzini
2019-12-18 12:02 ` [PULL 62/87] colo: fix return without releasing RCU Paolo Bonzini
2019-12-18 12:02 ` [PULL 63/87] build: rename CONFIG_LIBCAP to CONFIG_LIBCAP_NG Paolo Bonzini
2019-12-18 12:02 ` [PULL 64/87] docs: import Linux kernel-doc script and extension Paolo Bonzini
2019-12-18 12:02 ` [PULL 65/87] docs: tweak kernel-doc for QEMU coding standards Paolo Bonzini
2019-12-18 12:02 ` [PULL 66/87] docs/conf.py: Enable use of kerneldoc sphinx extension Paolo Bonzini
2019-12-18 12:02 ` [PULL 67/87] Makefile: disable Sphinx nitpicking Paolo Bonzini
2019-12-18 12:02 ` [PULL 68/87] bitops.h: Silence kernel-doc complaints Paolo Bonzini
2019-12-18 12:02 ` [PULL 69/87] docs: Create bitops.rst as example of kernel-docs Paolo Bonzini
2019-12-18 12:02 ` [PULL 70/87] memory.h: Silence kernel-doc complaints Paolo Bonzini
2019-12-18 12:02 ` [PULL 71/87] docs: add memory API reference Paolo Bonzini
2019-12-18 12:02 ` [PULL 72/87] memory: include MemoryListener documentation and some missing function parameters Paolo Bonzini
2019-12-18 12:02 ` [PULL 73/87] migration: check length directly to make sure the range is aligned Paolo Bonzini
2019-12-18 12:02 ` [PULL 74/87] WHPX: refactor load library Paolo Bonzini
2019-12-18 12:02 ` [PULL 75/87] target/i386: remove unused pci-assign codes Paolo Bonzini
2019-12-18 12:02 ` [PULL 76/87] Fix some comment spelling errors Paolo Bonzini
2019-12-18 12:02 ` [PULL 77/87] hw/pci-host/i440fx: Correct the header description Paolo Bonzini
2019-12-18 12:02 ` [PULL 78/87] hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h" Paolo Bonzini
2019-12-18 12:02 ` [PULL 79/87] hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE() Paolo Bonzini
2019-12-18 12:02 ` [PULL 80/87] hw/pci-host/i440fx: Use definitions instead of magic values Paolo Bonzini
2019-12-18 12:02 ` [PULL 81/87] hw/pci-host/i440fx: Extract the IGD passthrough host bridge device Paolo Bonzini
2019-12-18 12:02 ` [PULL 82/87] hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge Paolo Bonzini
2019-12-18 12:02 ` [PULL 83/87] hw/i386: Remove the deprecated machines 0.12 up to 0.15 Paolo Bonzini
2019-12-18 12:02 ` [PULL 84/87] hw/audio: Remove the "use_broken_id" hack from the AC97 device Paolo Bonzini
2019-12-18 12:02 ` [PULL 85/87] hw/pci: Remove the "command_serr_enable" property Paolo Bonzini
2019-12-18 12:02 ` [PULL 86/87] hw/display: Remove "rombar" hack from vga-pci and vmware_vga Paolo Bonzini
2019-12-18 12:02 ` [PULL 87/87] vga: cleanup mapping of VRAM for non-PCI VGA Paolo Bonzini
2019-12-20 12:45 ` [PULL 00/87] Misc patches for 2019-12-18 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576670573-48048-59-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).