[PATCH v4 64/80] ppc/{ppc440_bamboo, sam460ex}: drop RAM size fixup

[Igor Mammedov <imammedo@redhat.com>]

If user provided non-sense RAM size, board will complain and
continue running with max RAM size supported or sometimes
crash like this:
  %QEMU -M bamboo -m 1
    exec.c:1926: find_ram_offset: Assertion `size != 0' failed.
    Aborted (core dumped)
Also RAM is going to be allocated by generic code, so it won't be
possible for board to fix things up for user.

Make it error message and exit to force user fix CLI,
instead of accepting non-sense CLI values.
That also fixes crash issue, since wrongly calculated size
isn't used to allocate RAM

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
---
v2:
  * s/ppc4xx_sdram_adjust/ppc4xx_sdram_prep/
     (BALATON Zoltan <balaton@eik.bme.hu>)
  * print possible valid ram size id not all RAM was distributed
  * initialize ram_bases/ram_bases at the same time we are checking
    that user supplied RAM would fit available banks and drop nested
    loop that were duplicating the same calculations.
  * coincidentally fix crash when -m is less than minimal bank size
v3:
  * s/ppc4xx_sdram_prep/ppc4xx_sdram_banks/
      (BALATON Zoltan <balaton@eik.bme.hu>)
  * fix subject line in commit message
v3.1:
  * add lost 'break' statement in 'j' loop
v3.2:
  * replace global ram_size with machine->ram_size in ppc4xx_sdram_banks() call
  * add a comment about the expected sorting order within sdram_bank_sizes[]
    (BALATON Zoltan <balaton@eik.bme.hu>)
---
 include/hw/ppc/ppc4xx.h |  9 ++++----
 hw/ppc/ppc440_bamboo.c  | 11 ++++-----
 hw/ppc/ppc4xx_devs.c    | 60 ++++++++++++++++++++++++++-----------------------
 hw/ppc/sam460ex.c       |  5 ++---
 4 files changed, 42 insertions(+), 43 deletions(-)

diff --git a/include/hw/ppc/ppc4xx.h b/include/hw/ppc/ppc4xx.h
index 7d82259..b8c8f32 100644
--- a/include/hw/ppc/ppc4xx.h
+++ b/include/hw/ppc/ppc4xx.h
@@ -42,11 +42,10 @@ enum {
 qemu_irq *ppcuic_init (CPUPPCState *env, qemu_irq *irqs,
                        uint32_t dcr_base, int has_ssr, int has_vr);
 
-ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
-                               MemoryRegion ram_memories[],
-                               hwaddr ram_bases[],
-                               hwaddr ram_sizes[],
-                               const ram_addr_t sdram_bank_sizes[]);
+void ppc4xx_sdram_banks(ram_addr_t ram_size, int nr_banks,
+                        MemoryRegion ram_memories[],
+                        hwaddr ram_bases[], hwaddr ram_sizes[],
+                        const ram_addr_t sdram_bank_sizes[]);
 
 void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,
                         MemoryRegion ram_memories[],
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index da777ef..7e3bc0e 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -158,7 +158,6 @@ static void main_cpu_reset(void *opaque)
 
 static void bamboo_init(MachineState *machine)
 {
-    ram_addr_t ram_size = machine->ram_size;
     const char *kernel_filename = machine->kernel_filename;
     const char *kernel_cmdline = machine->kernel_cmdline;
     const char *initrd_filename = machine->initrd_filename;
@@ -203,10 +202,8 @@ static void bamboo_init(MachineState *machine)
     /* SDRAM controller */
     memset(ram_bases, 0, sizeof(ram_bases));
     memset(ram_sizes, 0, sizeof(ram_sizes));
-    ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS,
-                                   ram_memories,
-                                   ram_bases, ram_sizes,
-                                   ppc440ep_sdram_bank_sizes);
+    ppc4xx_sdram_banks(machine->ram_size, PPC440EP_SDRAM_NR_BANKS, ram_memories,
+                       ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes);
     /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
     ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
                       ram_bases, ram_sizes, 1);
@@ -268,7 +265,7 @@ static void bamboo_init(MachineState *machine)
     /* Load initrd. */
     if (initrd_filename) {
         initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
-                                          ram_size - RAMDISK_ADDR);
+                                          machine->ram_size - RAMDISK_ADDR);
 
         if (initrd_size < 0) {
             error_report("could not load ram disk '%s' at %x",
@@ -279,7 +276,7 @@ static void bamboo_init(MachineState *machine)
 
     /* If we're loading a kernel directly, we must load the device tree too. */
     if (kernel_filename) {
-        if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
+        if (bamboo_load_device_tree(FDT_ADDR, machine->ram_size, RAMDISK_ADDR,
                                     initrd_size, kernel_cmdline) < 0) {
             error_report("couldn't load device tree");
             exit(1);
diff --git a/hw/ppc/ppc4xx_devs.c b/hw/ppc/ppc4xx_devs.c
index c2e5013..d89008a 100644
--- a/hw/ppc/ppc4xx_devs.c
+++ b/hw/ppc/ppc4xx_devs.c
@@ -668,21 +668,22 @@ void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,
 
 /* Fill in consecutive SDRAM banks with 'ram_size' bytes of memory.
  *
- * sdram_bank_sizes[] must be 0-terminated.
+ * sdram_bank_sizes[] must be in descending order, that is sizes[i] > sizes[i+1]
+ * and must be 0-terminated.
  *
  * The 4xx SDRAM controller supports a small number of banks, and each bank
  * must be one of a small set of sizes. The number of banks and the supported
  * sizes varies by SoC. */
-ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
-                               MemoryRegion ram_memories[],
-                               hwaddr ram_bases[],
-                               hwaddr ram_sizes[],
-                               const ram_addr_t sdram_bank_sizes[])
+void ppc4xx_sdram_banks(ram_addr_t ram_size, int nr_banks,
+                        MemoryRegion ram_memories[],
+                        hwaddr ram_bases[], hwaddr ram_sizes[],
+                        const ram_addr_t sdram_bank_sizes[])
 {
     MemoryRegion *ram = g_malloc0(sizeof(*ram));
     ram_addr_t size_left = ram_size;
     ram_addr_t base = 0;
     ram_addr_t bank_size;
+    int last_bank = 0;
     int i;
     int j;
 
@@ -690,7 +691,12 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
         for (j = 0; sdram_bank_sizes[j] != 0; j++) {
             bank_size = sdram_bank_sizes[j];
             if (bank_size <= size_left) {
+                ram_bases[i] = base;
+                ram_sizes[i] = bank_size;
+                base += bank_size;
                 size_left -= bank_size;
+                last_bank = i;
+                break;
             }
         }
         if (!size_left) {
@@ -699,34 +705,32 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
         }
     }
 
-    ram_size -= size_left;
     if (size_left) {
-        error_report("Truncating memory to %" PRId64 " MiB to fit SDRAM"
-                     " controller limits", ram_size / MiB);
+        ram_addr_t used_size = ram_size - size_left;
+        GString *s = g_string_new(NULL);
+
+        for (i = 0; sdram_bank_sizes[i]; i++) {
+            g_string_append_printf(s, "%" PRIi64 "%s",
+                                   sdram_bank_sizes[i] / MiB,
+                                   sdram_bank_sizes[i + 1] ? " ," : "");
+        }
+        error_report("Max %d banks of %s MB DIMM/bank supported",
+            nr_banks, s->str);
+        error_report("Possible valid RAM size: %" PRIi64,
+            used_size ? used_size / MiB : sdram_bank_sizes[i - 1] / MiB);
+
+        g_string_free(s, true);
+        exit(EXIT_FAILURE);
     }
 
     memory_region_allocate_system_memory(ram, NULL, "ppc4xx.sdram", ram_size);
 
-    size_left = ram_size;
-    for (i = 0; i < nr_banks && size_left; i++) {
-        for (j = 0; sdram_bank_sizes[j] != 0; j++) {
-            bank_size = sdram_bank_sizes[j];
-
-            if (bank_size <= size_left) {
-                char name[32];
-                snprintf(name, sizeof(name), "ppc4xx.sdram%d", i);
-                memory_region_init_alias(&ram_memories[i], NULL, name, ram,
-                                         base, bank_size);
-                ram_bases[i] = base;
-                ram_sizes[i] = bank_size;
-                base += bank_size;
-                size_left -= bank_size;
-                break;
-            }
-        }
+    for (i = 0; i <= last_bank; i++) {
+        char name[32];
+        snprintf(name, sizeof(name), "ppc4xx.sdram%d", i);
+        memory_region_init_alias(&ram_memories[i], NULL, name, ram,
+                                 ram_bases[i], ram_sizes[i]);
     }
-
-    return ram_size;
 }
 
 /*****************************************************************************/
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index 89bc70e..17d40bd 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -324,9 +324,8 @@ static void sam460ex_init(MachineState *machine)
     /* SDRAM controller */
     /* put all RAM on first bank because board has one slot
      * and firmware only checks that */
-    machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
-                                   ram_memories, ram_bases, ram_sizes,
-                                   ppc460ex_sdram_bank_sizes);
+    ppc4xx_sdram_banks(machine->ram_size, 1, ram_memories, ram_bases, ram_sizes,
+                       ppc460ex_sdram_bank_sizes);
 
     /* FIXME: does 460EX have ECC interrupts? */
     ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
-- 
2.7.4