[PULL V2 13/23] dp8393x: Don't reset Silicon Revision register

[Jason Wang <jasowang@redhat.com>]

From: Finn Thain <fthain@telegraphics.com.au>

The jazzsonic driver in Linux uses the Silicon Revision register value
to probe the chip. The driver fails unless the SR register contains 4.
Unfortunately, reading this register in QEMU usually returns 0 because
the s->regs[] array gets wiped after a software reset.

Fixes: bd8f1ebce4 ("net/dp8393x: fix hardware reset")
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 hw/net/dp8393x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index cfbc2ee..c2ac2a1 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -923,6 +923,7 @@ static void dp8393x_reset(DeviceState *dev)
     timer_del(s->watchdog);
 
     memset(s->regs, 0, sizeof(s->regs));
+    s->regs[SONIC_SR] = 0x0004; /* only revision recognized by Linux/mips */
     s->regs[SONIC_CR] = SONIC_CR_RST | SONIC_CR_STP | SONIC_CR_RXDIS;
     s->regs[SONIC_DCR] &= ~(SONIC_DCR_EXBUS | SONIC_DCR_LBR);
     s->regs[SONIC_RCR] &= ~(SONIC_RCR_LB0 | SONIC_RCR_LB1 | SONIC_RCR_BRD | SONIC_RCR_RNT);
@@ -975,7 +976,6 @@ static void dp8393x_realize(DeviceState *dev, Error **errp)
     qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
 
     s->watchdog = timer_new_ns(QEMU_CLOCK_VIRTUAL, dp8393x_watchdog, s);
-    s->regs[SONIC_SR] = 0x0004; /* only revision recognized by Linux */
 
     memory_region_init_ram(&s->prom, OBJECT(dev),
                            "dp8393x-prom", SONIC_PROM_SIZE, &local_err);
-- 
2.5.0