qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: peter.maydell@linaro.org
Cc: Jason Wang <jasowang@redhat.com>,
	qemu-devel@nongnu.org, Finn Thain <fthain@telegraphics.com.au>
Subject: [PULL V2 01/23] dp8393x: Mask EOL bit from descriptor addresses
Date: Tue,  3 Mar 2020 18:10:20 +0800	[thread overview]
Message-ID: <1583230242-14597-2-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1583230242-14597-1-git-send-email-jasowang@redhat.com>

From: Finn Thain <fthain@telegraphics.com.au>

The Least Significant bit of a descriptor address register is used as
an EOL flag. It has to be masked when the register value is to be used
as an actual address for copying memory around. But when the registers
are to be updated the EOL bit should not be masked.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 hw/net/dp8393x.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index 7045193..216d44b 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -145,6 +145,9 @@ do { printf("sonic ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)
 #define SONIC_ISR_PINT   0x0800
 #define SONIC_ISR_LCD    0x1000
 
+#define SONIC_DESC_EOL   0x0001
+#define SONIC_DESC_ADDR  0xFFFE
+
 #define TYPE_DP8393X "dp8393x"
 #define DP8393X(obj) OBJECT_CHECK(dp8393xState, (obj), TYPE_DP8393X)
 
@@ -197,7 +200,8 @@ static uint32_t dp8393x_crba(dp8393xState *s)
 
 static uint32_t dp8393x_crda(dp8393xState *s)
 {
-    return (s->regs[SONIC_URDA] << 16) | s->regs[SONIC_CRDA];
+    return (s->regs[SONIC_URDA] << 16) |
+           (s->regs[SONIC_CRDA] & SONIC_DESC_ADDR);
 }
 
 static uint32_t dp8393x_rbwc(dp8393xState *s)
@@ -217,7 +221,8 @@ static uint32_t dp8393x_tsa(dp8393xState *s)
 
 static uint32_t dp8393x_ttda(dp8393xState *s)
 {
-    return (s->regs[SONIC_UTDA] << 16) | s->regs[SONIC_TTDA];
+    return (s->regs[SONIC_UTDA] << 16) |
+           (s->regs[SONIC_TTDA] & SONIC_DESC_ADDR);
 }
 
 static uint32_t dp8393x_wt(dp8393xState *s)
@@ -509,7 +514,7 @@ static void dp8393x_do_transmit_packets(dp8393xState *s)
                                MEMTXATTRS_UNSPECIFIED, s->data,
                                size);
             s->regs[SONIC_CTDA] = dp8393x_get(s, width, 0) & ~0x1;
-            if (dp8393x_get(s, width, 0) & 0x1) {
+            if (dp8393x_get(s, width, 0) & SONIC_DESC_EOL) {
                 /* EOL detected */
                 break;
             }
@@ -765,13 +770,13 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
     /* XXX: Check byte ordering */
 
     /* Check for EOL */
-    if (s->regs[SONIC_LLFA] & 0x1) {
+    if (s->regs[SONIC_LLFA] & SONIC_DESC_EOL) {
         /* Are we still in resource exhaustion? */
         size = sizeof(uint16_t) * 1 * width;
         address = dp8393x_crda(s) + sizeof(uint16_t) * 5 * width;
         address_space_read(&s->as, address, MEMTXATTRS_UNSPECIFIED,
                            s->data, size);
-        if (dp8393x_get(s, width, 0) & 0x1) {
+        if (dp8393x_get(s, width, 0) & SONIC_DESC_EOL) {
             /* Still EOL ; stop reception */
             return -1;
         } else {
@@ -831,7 +836,7 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
                        dp8393x_crda(s) + sizeof(uint16_t) * 5 * width,
                        MEMTXATTRS_UNSPECIFIED, s->data, size);
     s->regs[SONIC_LLFA] = dp8393x_get(s, width, 0);
-    if (s->regs[SONIC_LLFA] & 0x1) {
+    if (s->regs[SONIC_LLFA] & SONIC_DESC_EOL) {
         /* EOL detected */
         s->regs[SONIC_ISR] |= SONIC_ISR_RDE;
     } else {
-- 
2.5.0



  reply	other threads:[~2020-03-03 10:12 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-03 10:10 [PULL V2 00/23] Net patches Jason Wang
2020-03-03 10:10 ` Jason Wang [this message]
2020-03-03 22:44   ` [PULL V2 01/23] dp8393x: Mask EOL bit from descriptor addresses Finn Thain
2020-03-04  2:43     ` Jason Wang
2020-03-03 10:10 ` [PULL V2 02/23] dp8393x: Always use 32-bit accesses Jason Wang
2020-03-03 10:10 ` [PULL V2 03/23] dp8393x: Clean up endianness hacks Jason Wang
2020-03-03 10:10 ` [PULL V2 04/23] dp8393x: Have dp8393x_receive() return the packet size Jason Wang
2020-03-03 10:10 ` [PULL V2 05/23] dp8393x: Update LLFA and CRDA registers from rx descriptor Jason Wang
2020-03-03 10:10 ` [PULL V2 06/23] dp8393x: Clear RRRA command register bit only when appropriate Jason Wang
2020-03-03 10:10 ` [PULL V2 07/23] dp8393x: Implement packet size limit and RBAE interrupt Jason Wang
2020-03-03 10:10 ` [PULL V2 08/23] dp8393x: Don't clobber packet checksum Jason Wang
2020-03-03 10:10 ` [PULL V2 09/23] dp8393x: Use long-word-aligned RRA pointers in 32-bit mode Jason Wang
2020-03-03 10:10 ` [PULL V2 10/23] dp8393x: Pad frames to word or long word boundary Jason Wang
2020-03-03 10:10 ` [PULL V2 11/23] dp8393x: Clear descriptor in_use field to release packet Jason Wang
2020-03-03 10:10 ` [PULL V2 12/23] dp8393x: Always update RRA pointers and sequence numbers Jason Wang
2020-03-03 10:10 ` [PULL V2 13/23] dp8393x: Don't reset Silicon Revision register Jason Wang
2020-03-03 10:10 ` [PULL V2 14/23] dp8393x: Don't stop reception upon RBE interrupt assertion Jason Wang
2020-03-03 10:10 ` [PULL V2 15/23] e1000e: Avoid hw_error if legacy mode used Jason Wang
2020-03-03 10:10 ` [PULL V2 16/23] NetRxPkt: Introduce support for additional hash types Jason Wang
2020-03-03 10:10 ` [PULL V2 17/23] NetRxPkt: fix hash calculation of IPV6 TCP Jason Wang
2020-03-03 10:10 ` [PULL V2 18/23] hw: net: cadence_gem: Fix build errors in DB_PRINT() Jason Wang
2020-03-03 10:10 ` [PULL V2 19/23] block/replication.c: Ignore requests after failover Jason Wang
2020-03-03 10:10 ` [PULL V2 20/23] tests/test-replication.c: Add test for for secondary node continuing replication Jason Wang
2020-03-03 10:10 ` [PULL V2 21/23] net/filter.c: Add Options to insert filters anywhere in the filter list Jason Wang
2020-03-03 10:10 ` [PULL V2 22/23] colo: Update Documentation for continuous replication Jason Wang
2020-03-03 10:10 ` [PULL V2 23/23] l2tpv3: fix RFC number typo in qemu-options.hx Jason Wang
2020-03-03 13:45 ` [PULL V2 00/23] Net patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1583230242-14597-2-git-send-email-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=fthain@telegraphics.com.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).