[PATCH v2 0/5] hw/riscv: sifive_u: Add Mode Select (MSEL[3:0]) support

[PATCH v2 0/5] hw/riscv: sifive_u: Add Mode Select (MSEL[3:0]) support

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

This series updates the 'sifive_u' machine support:

- Change SiFive E/U series CPU reset vector to 0x1004
- Support Mode Select (MSEL[3:0]) settings at 0x1000 via a new
  "msel" machine property
- Add a dummy DDR memory controller device

With this series, QEMU can boot U-Boot SPL built for SiFive FU540
all the way up to loading U-Boot proper from MMC:

$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin

U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
Trying to boot from MMC1
Unhandled exception: Load access fault
EPC: 0000000008009be6 TVAL: 0000000010050014

The last big gap for the 'sifive_u' machine is the QSPI modeling.

Changes in v2:
- Drop the already applied patch 01 to 11 in v1
- new patch: Rename IBEX CPU init routine
- rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
- rename SiFive E/U CPU init routine names

Bin Meng (5):
  target/riscv: Rename IBEX CPU init routine
  hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004
  hw/riscv: sifive_u: Support different boot source per MSEL pin state
  hw/riscv: sifive_u: Sort the SoC memmap table entries
  hw/riscv: sifive_u: Add a dummy DDR memory controller device

 hw/riscv/sifive_e.c         | 10 +++++----
 hw/riscv/sifive_u.c         | 51 ++++++++++++++++++++++++++++++++++-----------
 include/hw/riscv/sifive_u.h |  7 +++++++
 target/riscv/cpu.c          | 20 +++++++++---------
 4 files changed, 62 insertions(+), 26 deletions(-)

-- 
2.7.4

[PATCH v2 1/5] target/riscv: Rename IBEX CPU init routine

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Current IBEX CPU init routine name seems to be too generic.
Since it uses a different reset vector from the generic one,
it merits a dedicated name.

Signed-off-by: Bin Meng <bin.meng@windriver.com>

---

Changes in v2:
- new patch: Rename IBEX CPU init routine

 target/riscv/cpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index e867766..5f03458 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -153,7 +153,7 @@ static void rvxx_imacu_nommu_cpu_init(Object *obj)
 
 #if defined(TARGET_RISCV32)
 
-static void rv32_imcu_nommu_cpu_init(Object *obj)
+static void rv32_ibex_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
     set_misa(env, RV32 | RVI | RVM | RVC | RVU);
@@ -577,7 +577,7 @@ static const TypeInfo riscv_cpu_type_infos[] = {
     DEFINE_CPU(TYPE_RISCV_CPU_ANY,              riscv_any_cpu_init),
 #if defined(TARGET_RISCV32)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_imcu_nommu_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_imacu_nommu_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_gcsu_priv1_10_0_cpu_init),
-- 
2.7.4

Re: [PATCH v2 1/5] target/riscv: Rename IBEX CPU init routine

[Alistair Francis]

On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> Current IBEX CPU init routine name seems to be too generic.
> Since it uses a different reset vector from the generic one,
> it merits a dedicated name.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

>
> ---
>
> Changes in v2:
> - new patch: Rename IBEX CPU init routine
>
>  target/riscv/cpu.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index e867766..5f03458 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -153,7 +153,7 @@ static void rvxx_imacu_nommu_cpu_init(Object *obj)
>
>  #if defined(TARGET_RISCV32)
>
> -static void rv32_imcu_nommu_cpu_init(Object *obj)
> +static void rv32_ibex_cpu_init(Object *obj)
>  {
>      CPURISCVState *env = &RISCV_CPU(obj)->env;
>      set_misa(env, RV32 | RVI | RVM | RVC | RVU);
> @@ -577,7 +577,7 @@ static const TypeInfo riscv_cpu_type_infos[] = {
>      DEFINE_CPU(TYPE_RISCV_CPU_ANY,              riscv_any_cpu_init),
>  #if defined(TARGET_RISCV32)
>      DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_imcu_nommu_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_imacu_nommu_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_gcsu_priv1_10_0_cpu_init),
> --
> 2.7.4
>
>

[PATCH v2 2/5] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Per the SiFive manual, all E/U series CPU cores' reset vector is
at 0x1004. Update our codes to match the hardware.

Signed-off-by: Bin Meng <bin.meng@windriver.com>

---

Changes in v2:
- rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
- rename SiFive E/U CPU init routine names

 hw/riscv/sifive_e.c | 10 ++++++----
 hw/riscv/sifive_u.c |  6 +++---
 target/riscv/cpu.c  | 16 ++++++++--------
 3 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index d9a5c7b..d1d3bf1 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -98,14 +98,16 @@ static void sifive_e_machine_init(MachineState *machine)
         memmap[SIFIVE_E_DTIM].base, main_mem);
 
     /* Mask ROM reset vector */
-    uint32_t reset_vec[2];
+    uint32_t reset_vec[4];
 
     if (s->revb) {
-        reset_vec[0] = 0x200102b7;        /* 0x1000: lui     t0,0x20010 */
+        reset_vec[1] = 0x200102b7;  /* 0x1004: lui     t0,0x20010 */
     } else {
-        reset_vec[0] = 0x204002b7;        /* 0x1000: lui     t0,0x20400 */
+        reset_vec[1] = 0x204002b7;  /* 0x1004: lui     t0,0x20400 */
     }
-    reset_vec[1] = 0x00028067;        /* 0x1004: jr      t0 */
+    reset_vec[2] = 0x00028067;      /* 0x1008: jr      t0 */
+
+    reset_vec[0] = reset_vec[3] = 0;
 
     /* copy in the reset vector in little_endian byte order */
     for (i = 0; i < sizeof(reset_vec) >> 2; i++) {
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index aaa5adb..0a86ffc 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -433,18 +433,18 @@ static void sifive_u_machine_init(MachineState *machine)
 
     /* reset vector */
     uint32_t reset_vec[8] = {
+        0x00000000,
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(dtb) */
-        0x02028593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
+        0x01c28593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
 #if defined(TARGET_RISCV32)
         0x0182a283,                    /*     lw     t0, 24(t0) */
 #elif defined(TARGET_RISCV64)
-        0x0182b283,                    /*     ld     t0, 24(t0) */
+        0x0182e283,                    /*     lwu    t0, 24(t0) */
 #endif
         0x00028067,                    /*     jr     t0 */
         0x00000000,
         start_addr,                    /* start: .dword */
-        0x00000000,
                                        /* dtb: */
     };
 
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 5f03458..391a0b9 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -134,20 +134,20 @@ static void riscv_base_cpu_init(Object *obj)
     set_resetvec(env, DEFAULT_RSTVEC);
 }
 
-static void rvxx_gcsu_priv1_10_0_cpu_init(Object *obj)
+static void rvxx_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
     set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
     set_priv_version(env, PRIV_VERSION_1_10_0);
-    set_resetvec(env, DEFAULT_RSTVEC);
+    set_resetvec(env, 0x1004);
 }
 
-static void rvxx_imacu_nommu_cpu_init(Object *obj)
+static void rvxx_sifive_e_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
     set_misa(env, RVXLEN | RVI | RVM | RVA | RVC | RVU);
     set_priv_version(env, PRIV_VERSION_1_10_0);
-    set_resetvec(env, DEFAULT_RSTVEC);
+    set_resetvec(env, 0x1004);
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
 
@@ -578,13 +578,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
 #if defined(TARGET_RISCV32)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_imacu_nommu_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_gcsu_priv1_10_0_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_sifive_u_cpu_init),
 #elif defined(TARGET_RISCV64)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_imacu_nommu_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_gcsu_priv1_10_0_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_sifive_e_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_sifive_u_cpu_init),
 #endif
 };
 
-- 
2.7.4

Re: [PATCH v2 2/5] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004

[Alistair Francis]

On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> Per the SiFive manual, all E/U series CPU cores' reset vector is
> at 0x1004. Update our codes to match the hardware.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

>
> ---
>
> Changes in v2:
> - rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
> - rename SiFive E/U CPU init routine names
>
>  hw/riscv/sifive_e.c | 10 ++++++----
>  hw/riscv/sifive_u.c |  6 +++---
>  target/riscv/cpu.c  | 16 ++++++++--------
>  3 files changed, 17 insertions(+), 15 deletions(-)
>
> diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
> index d9a5c7b..d1d3bf1 100644
> --- a/hw/riscv/sifive_e.c
> +++ b/hw/riscv/sifive_e.c
> @@ -98,14 +98,16 @@ static void sifive_e_machine_init(MachineState *machine)
>          memmap[SIFIVE_E_DTIM].base, main_mem);
>
>      /* Mask ROM reset vector */
> -    uint32_t reset_vec[2];
> +    uint32_t reset_vec[4];
>
>      if (s->revb) {
> -        reset_vec[0] = 0x200102b7;        /* 0x1000: lui     t0,0x20010 */
> +        reset_vec[1] = 0x200102b7;  /* 0x1004: lui     t0,0x20010 */
>      } else {
> -        reset_vec[0] = 0x204002b7;        /* 0x1000: lui     t0,0x20400 */
> +        reset_vec[1] = 0x204002b7;  /* 0x1004: lui     t0,0x20400 */
>      }
> -    reset_vec[1] = 0x00028067;        /* 0x1004: jr      t0 */
> +    reset_vec[2] = 0x00028067;      /* 0x1008: jr      t0 */
> +
> +    reset_vec[0] = reset_vec[3] = 0;
>
>      /* copy in the reset vector in little_endian byte order */
>      for (i = 0; i < sizeof(reset_vec) >> 2; i++) {
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index aaa5adb..0a86ffc 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -433,18 +433,18 @@ static void sifive_u_machine_init(MachineState *machine)
>
>      /* reset vector */
>      uint32_t reset_vec[8] = {
> +        0x00000000,
>          0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(dtb) */
> -        0x02028593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
> +        0x01c28593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
>          0xf1402573,                    /*     csrr   a0, mhartid  */
>  #if defined(TARGET_RISCV32)
>          0x0182a283,                    /*     lw     t0, 24(t0) */
>  #elif defined(TARGET_RISCV64)
> -        0x0182b283,                    /*     ld     t0, 24(t0) */
> +        0x0182e283,                    /*     lwu    t0, 24(t0) */
>  #endif
>          0x00028067,                    /*     jr     t0 */
>          0x00000000,
>          start_addr,                    /* start: .dword */
> -        0x00000000,
>                                         /* dtb: */
>      };
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 5f03458..391a0b9 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -134,20 +134,20 @@ static void riscv_base_cpu_init(Object *obj)
>      set_resetvec(env, DEFAULT_RSTVEC);
>  }
>
> -static void rvxx_gcsu_priv1_10_0_cpu_init(Object *obj)
> +static void rvxx_sifive_u_cpu_init(Object *obj)
>  {
>      CPURISCVState *env = &RISCV_CPU(obj)->env;
>      set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
>      set_priv_version(env, PRIV_VERSION_1_10_0);
> -    set_resetvec(env, DEFAULT_RSTVEC);
> +    set_resetvec(env, 0x1004);
>  }
>
> -static void rvxx_imacu_nommu_cpu_init(Object *obj)
> +static void rvxx_sifive_e_cpu_init(Object *obj)
>  {
>      CPURISCVState *env = &RISCV_CPU(obj)->env;
>      set_misa(env, RVXLEN | RVI | RVM | RVA | RVC | RVU);
>      set_priv_version(env, PRIV_VERSION_1_10_0);
> -    set_resetvec(env, DEFAULT_RSTVEC);
> +    set_resetvec(env, 0x1004);
>      qdev_prop_set_bit(DEVICE(obj), "mmu", false);
>  }
>
> @@ -578,13 +578,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
>  #if defined(TARGET_RISCV32)
>      DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_imacu_nommu_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_sifive_e_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_gcsu_priv1_10_0_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_sifive_u_cpu_init),
>  #elif defined(TARGET_RISCV64)
>      DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_imacu_nommu_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_gcsu_priv1_10_0_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_sifive_e_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_sifive_u_cpu_init),
>  #endif
>  };
>
> --
> 2.7.4
>
>

Re: [PATCH v2 2/5] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004

[Alistair Francis]

On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> Per the SiFive manual, all E/U series CPU cores' reset vector is
> at 0x1004. Update our codes to match the hardware.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>

This commit breaks my Oreboot test.

Oreboot starts in flash and we run the command with the
`sifive_u,start-in-flash=true` machine.

I have removed this and the later patches from the RISC-V branch. I
want to send a PR today. After that I'll look into this.

Alistair

>
> ---
>
> Changes in v2:
> - rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
> - rename SiFive E/U CPU init routine names
>
>  hw/riscv/sifive_e.c | 10 ++++++----
>  hw/riscv/sifive_u.c |  6 +++---
>  target/riscv/cpu.c  | 16 ++++++++--------
>  3 files changed, 17 insertions(+), 15 deletions(-)
>
> diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
> index d9a5c7b..d1d3bf1 100644
> --- a/hw/riscv/sifive_e.c
> +++ b/hw/riscv/sifive_e.c
> @@ -98,14 +98,16 @@ static void sifive_e_machine_init(MachineState *machine)
>          memmap[SIFIVE_E_DTIM].base, main_mem);
>
>      /* Mask ROM reset vector */
> -    uint32_t reset_vec[2];
> +    uint32_t reset_vec[4];
>
>      if (s->revb) {
> -        reset_vec[0] = 0x200102b7;        /* 0x1000: lui     t0,0x20010 */
> +        reset_vec[1] = 0x200102b7;  /* 0x1004: lui     t0,0x20010 */
>      } else {
> -        reset_vec[0] = 0x204002b7;        /* 0x1000: lui     t0,0x20400 */
> +        reset_vec[1] = 0x204002b7;  /* 0x1004: lui     t0,0x20400 */
>      }
> -    reset_vec[1] = 0x00028067;        /* 0x1004: jr      t0 */
> +    reset_vec[2] = 0x00028067;      /* 0x1008: jr      t0 */
> +
> +    reset_vec[0] = reset_vec[3] = 0;
>
>      /* copy in the reset vector in little_endian byte order */
>      for (i = 0; i < sizeof(reset_vec) >> 2; i++) {
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index aaa5adb..0a86ffc 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -433,18 +433,18 @@ static void sifive_u_machine_init(MachineState *machine)
>
>      /* reset vector */
>      uint32_t reset_vec[8] = {
> +        0x00000000,
>          0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(dtb) */
> -        0x02028593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
> +        0x01c28593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
>          0xf1402573,                    /*     csrr   a0, mhartid  */
>  #if defined(TARGET_RISCV32)
>          0x0182a283,                    /*     lw     t0, 24(t0) */
>  #elif defined(TARGET_RISCV64)
> -        0x0182b283,                    /*     ld     t0, 24(t0) */
> +        0x0182e283,                    /*     lwu    t0, 24(t0) */
>  #endif
>          0x00028067,                    /*     jr     t0 */
>          0x00000000,
>          start_addr,                    /* start: .dword */
> -        0x00000000,
>                                         /* dtb: */
>      };
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 5f03458..391a0b9 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -134,20 +134,20 @@ static void riscv_base_cpu_init(Object *obj)
>      set_resetvec(env, DEFAULT_RSTVEC);
>  }
>
> -static void rvxx_gcsu_priv1_10_0_cpu_init(Object *obj)
> +static void rvxx_sifive_u_cpu_init(Object *obj)
>  {
>      CPURISCVState *env = &RISCV_CPU(obj)->env;
>      set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
>      set_priv_version(env, PRIV_VERSION_1_10_0);
> -    set_resetvec(env, DEFAULT_RSTVEC);
> +    set_resetvec(env, 0x1004);
>  }
>
> -static void rvxx_imacu_nommu_cpu_init(Object *obj)
> +static void rvxx_sifive_e_cpu_init(Object *obj)
>  {
>      CPURISCVState *env = &RISCV_CPU(obj)->env;
>      set_misa(env, RVXLEN | RVI | RVM | RVA | RVC | RVU);
>      set_priv_version(env, PRIV_VERSION_1_10_0);
> -    set_resetvec(env, DEFAULT_RSTVEC);
> +    set_resetvec(env, 0x1004);
>      qdev_prop_set_bit(DEVICE(obj), "mmu", false);
>  }
>
> @@ -578,13 +578,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
>  #if defined(TARGET_RISCV32)
>      DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_imacu_nommu_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_sifive_e_cpu_init),
>      DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_gcsu_priv1_10_0_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_sifive_u_cpu_init),
>  #elif defined(TARGET_RISCV64)
>      DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_imacu_nommu_cpu_init),
> -    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_gcsu_priv1_10_0_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_sifive_e_cpu_init),
> +    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_sifive_u_cpu_init),
>  #endif
>  };
>
> --
> 2.7.4
>
>

Re: [PATCH v2 2/5] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004

[Bin Meng]

Hi Alistair,

On Thu, Jun 18, 2020 at 12:40 AM Alistair Francis <alistair23@gmail.com> wrote:
>
> On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > From: Bin Meng <bin.meng@windriver.com>
> >
> > Per the SiFive manual, all E/U series CPU cores' reset vector is
> > at 0x1004. Update our codes to match the hardware.
> >
> > Signed-off-by: Bin Meng <bin.meng@windriver.com>
>
> This commit breaks my Oreboot test.
>
> Oreboot starts in flash and we run the command with the
> `sifive_u,start-in-flash=true` machine.

Could you please post an Oreboot binary for testing somewhere, or some
instructions so that I can test this?

>
> I have removed this and the later patches from the RISC-V branch. I
> want to send a PR today. After that I'll look into this.

Regards,
Bin

Re: [PATCH v2 2/5] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004

[Bin Meng]

Hi Alistair,

On Thu, Jun 18, 2020 at 8:41 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Hi Alistair,
>
> On Thu, Jun 18, 2020 at 12:40 AM Alistair Francis <alistair23@gmail.com> wrote:
> >
> > On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> > >
> > > From: Bin Meng <bin.meng@windriver.com>
> > >
> > > Per the SiFive manual, all E/U series CPU cores' reset vector is
> > > at 0x1004. Update our codes to match the hardware.
> > >
> > > Signed-off-by: Bin Meng <bin.meng@windriver.com>
> >
> > This commit breaks my Oreboot test.
> >
> > Oreboot starts in flash and we run the command with the
> > `sifive_u,start-in-flash=true` machine.
>
> Could you please post an Oreboot binary for testing somewhere, or some
> instructions so that I can test this?
>

I have figured out where the issue is. The issue is inside the Oreboot
codes that its QEMU detecting logic should be updated to match this
change.

I've sent pull request to Oreboot to fix this:
https://github.com/oreboot/oreboot/pull/264

> >
> > I have removed this and the later patches from the RISC-V branch. I
> > want to send a PR today. After that I'll look into this.
>

I don't think we should drop this patch and later ones in this series.

Regards,
Bin

Re: [PATCH v2 2/5] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004

[Alistair Francis]

On Wed, Jun 17, 2020 at 10:08 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Hi Alistair,
>
> On Thu, Jun 18, 2020 at 8:41 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > Hi Alistair,
> >
> > On Thu, Jun 18, 2020 at 12:40 AM Alistair Francis <alistair23@gmail.com> wrote:
> > >
> > > On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > >
> > > > From: Bin Meng <bin.meng@windriver.com>
> > > >
> > > > Per the SiFive manual, all E/U series CPU cores' reset vector is
> > > > at 0x1004. Update our codes to match the hardware.
> > > >
> > > > Signed-off-by: Bin Meng <bin.meng@windriver.com>
> > >
> > > This commit breaks my Oreboot test.
> > >
> > > Oreboot starts in flash and we run the command with the
> > > `sifive_u,start-in-flash=true` machine.
> >
> > Could you please post an Oreboot binary for testing somewhere, or some
> > instructions so that I can test this?
> >
>
> I have figured out where the issue is. The issue is inside the Oreboot
> codes that its QEMU detecting logic should be updated to match this
> change.
>
> I've sent pull request to Oreboot to fix this:
> https://github.com/oreboot/oreboot/pull/264

Thanks for that.

>
> > >
> > > I have removed this and the later patches from the RISC-V branch. I
> > > want to send a PR today. After that I'll look into this.
> >
>
> I don't think we should drop this patch and later ones in this series.

Applied again then.

Alistair

>
> Regards,
> Bin

[PATCH v2 3/5] hw/riscv: sifive_u: Support different boot source per MSEL pin state

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

SiFive FU540 SoC supports booting from several sources, which are
controlled using the Mode Select (MSEL[3:0]) pins on the chip.
Typically, the boot process runs through several stages before it
begins execution of user-provided programs.

The SoC supports booting from memory-mapped QSPI flash, which is
how start_in_flash property is used for at present. This matches
MSEL = 1 configuration (QSPI0).

Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL).
It's not necessary for QEMU to implement the full ZSBL ROM codes,
because we know ZSBL downloads the next stage program into the L2
LIM at address 0x8000000 and executes from there. We can bypass
the whole ZSBL execution and use "-bios" to load the next stage
program directly if MSEL indicates a ZSBL booting flow.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v1)

 hw/riscv/sifive_u.c         | 39 +++++++++++++++++++++++++++++++--------
 include/hw/riscv/sifive_u.h |  6 ++++++
 2 files changed, 37 insertions(+), 8 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 0a86ffc..f64aa52 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -408,8 +408,34 @@ static void sifive_u_machine_init(MachineState *machine)
     /* create device tree */
     create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
 
-    riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                 memmap[SIFIVE_U_DRAM].base, NULL);
+    if (s->start_in_flash) {
+        /*
+         * If start_in_flash property is given, assign s->msel to a value
+         * that representing booting from QSPI0 memory-mapped flash.
+         *
+         * This also means that when both start_in_flash and msel properties
+         * are given, start_in_flash takes the precedence over msel.
+         *
+         * Note this is to keep backward compatibility not to break existing
+         * users that use start_in_flash property.
+         */
+        s->msel = MSEL_MEMMAP_QSPI0_FLASH;
+    }
+
+    switch (s->msel) {
+    case MSEL_MEMMAP_QSPI0_FLASH:
+        start_addr = memmap[SIFIVE_U_FLASH0].base;
+        break;
+    case MSEL_L2LIM_QSPI0_FLASH:
+    case MSEL_L2LIM_QSPI2_SD:
+        start_addr = memmap[SIFIVE_U_L2LIM].base;
+        break;
+    default:
+        start_addr = memmap[SIFIVE_U_DRAM].base;
+        break;
+    }
+
+    riscv_find_and_load_firmware(machine, BIOS_FILENAME, start_addr, NULL);
 
     if (machine->kernel_filename) {
         uint64_t kernel_entry = riscv_load_kernel(machine->kernel_filename,
@@ -427,13 +453,9 @@ static void sifive_u_machine_init(MachineState *machine)
         }
     }
 
-    if (s->start_in_flash) {
-        start_addr = memmap[SIFIVE_U_FLASH0].base;
-    }
-
     /* reset vector */
     uint32_t reset_vec[8] = {
-        0x00000000,
+        s->msel,                       /* MSEL pin state */
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(dtb) */
         0x01c28593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
@@ -505,7 +527,8 @@ static void sifive_u_machine_instance_init(Object *obj)
                              sifive_u_machine_set_start_in_flash);
     object_property_set_description(obj, "start-in-flash",
                                     "Set on to tell QEMU's ROM to jump to "
-                                    "flash. Otherwise QEMU will jump to DRAM");
+                                    "flash. Otherwise QEMU will jump to DRAM "
+                                    "or L2LIM depending on the msel value");
 
     s->msel = 0;
     object_property_add(obj, "msel", "uint32",
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index d82cfe0..5d80f91 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -111,6 +111,12 @@ enum {
     SIFIVE_U_RTCCLK_FREQ = 1000000
 };
 
+enum {
+    MSEL_MEMMAP_QSPI0_FLASH = 1,
+    MSEL_L2LIM_QSPI0_FLASH = 6,
+    MSEL_L2LIM_QSPI2_SD = 11
+};
+
 #define SIFIVE_U_MANAGEMENT_CPU_COUNT   1
 #define SIFIVE_U_COMPUTE_CPU_COUNT      4
 
-- 
2.7.4

[PATCH v2 4/5] hw/riscv: sifive_u: Sort the SoC memmap table entries

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Move the flash and DRAM to the end of the SoC memmap table.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v1)

 hw/riscv/sifive_u.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index f64aa52..c94ff6f 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -80,10 +80,10 @@ static const struct MemmapEntry {
     [SIFIVE_U_UART1] =    { 0x10011000,     0x1000 },
     [SIFIVE_U_GPIO] =     { 0x10060000,     0x1000 },
     [SIFIVE_U_OTP] =      { 0x10070000,     0x1000 },
-    [SIFIVE_U_FLASH0] =   { 0x20000000, 0x10000000 },
-    [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
     [SIFIVE_U_GEM] =      { 0x10090000,     0x2000 },
     [SIFIVE_U_GEM_MGMT] = { 0x100a0000,     0x1000 },
+    [SIFIVE_U_FLASH0] =   { 0x20000000, 0x10000000 },
+    [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
 };
 
 #define OTP_SERIAL          1
-- 
2.7.4

[PATCH v2 5/5] hw/riscv: sifive_u: Add a dummy DDR memory controller device

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

It is enough to simply map the SiFive FU540 DDR memory controller
into the MMIO space using create_unimplemented_device(), to make
the upstream U-Boot v2020.07 DDR memory initialization codes happy.

Note we do not generate device tree fragment for the DDR memory
controller. Since the controller data in device tree consumes a
very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the
U-Boot source), and it is only needed by U-Boot SPL but not any
operating system, we choose not to generate the fragment here.
This also means when testing with U-Boot SPL, the device tree has
to come from U-Boot SPL itself, but not the one generated by QEMU
on the fly. The memory has to be set to 8GiB to match the real
HiFive Unleashed board when invoking QEMU (-m 8G).

With this commit, QEMU can boot U-Boot SPL built for SiFive FU540
all the way up to loading U-Boot proper from MMC:

$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin

U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
Trying to boot from MMC1
Unhandled exception: Load access fault
EPC: 0000000008009be6 TVAL: 0000000010050014

The above exception is expected because QSPI is unsupported yet.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

(no changes since v1)

 hw/riscv/sifive_u.c         | 4 ++++
 include/hw/riscv/sifive_u.h | 1 +
 2 files changed, 5 insertions(+)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index c94ff6f..7923df4 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -82,6 +82,7 @@ static const struct MemmapEntry {
     [SIFIVE_U_OTP] =      { 0x10070000,     0x1000 },
     [SIFIVE_U_GEM] =      { 0x10090000,     0x2000 },
     [SIFIVE_U_GEM_MGMT] = { 0x100a0000,     0x1000 },
+    [SIFIVE_U_DMC] =      { 0x100b0000,    0x10000 },
     [SIFIVE_U_FLASH0] =   { 0x20000000, 0x10000000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
 };
@@ -733,6 +734,9 @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
 
     create_unimplemented_device("riscv.sifive.u.gem-mgmt",
         memmap[SIFIVE_U_GEM_MGMT].base, memmap[SIFIVE_U_GEM_MGMT].size);
+
+    create_unimplemented_device("riscv.sifive.u.dmc",
+        memmap[SIFIVE_U_DMC].base, memmap[SIFIVE_U_DMC].size);
 }
 
 static Property sifive_u_soc_props[] = {
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 5d80f91..3e33646 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -78,6 +78,7 @@ enum {
     SIFIVE_U_UART1,
     SIFIVE_U_GPIO,
     SIFIVE_U_OTP,
+    SIFIVE_U_DMC,
     SIFIVE_U_FLASH0,
     SIFIVE_U_DRAM,
     SIFIVE_U_GEM,
-- 
2.7.4

Re: [PATCH v2 0/5] hw/riscv: sifive_u: Add Mode Select (MSEL[3:0]) support

[Alistair Francis]

On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> This series updates the 'sifive_u' machine support:
>
> - Change SiFive E/U series CPU reset vector to 0x1004
> - Support Mode Select (MSEL[3:0]) settings at 0x1000 via a new
>   "msel" machine property
> - Add a dummy DDR memory controller device
>
> With this series, QEMU can boot U-Boot SPL built for SiFive FU540
> all the way up to loading U-Boot proper from MMC:
>
> $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin
>
> U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
> Trying to boot from MMC1
> Unhandled exception: Load access fault
> EPC: 0000000008009be6 TVAL: 0000000010050014
>
> The last big gap for the 'sifive_u' machine is the QSPI modeling.
>
> Changes in v2:
> - Drop the already applied patch 01 to 11 in v1
> - new patch: Rename IBEX CPU init routine
> - rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
> - rename SiFive E/U CPU init routine names
>
> Bin Meng (5):
>   target/riscv: Rename IBEX CPU init routine
>   hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004
>   hw/riscv: sifive_u: Support different boot source per MSEL pin state
>   hw/riscv: sifive_u: Sort the SoC memmap table entries
>   hw/riscv: sifive_u: Add a dummy DDR memory controller device

Applied to the RISC-V tree

Alistair

>
>  hw/riscv/sifive_e.c         | 10 +++++----
>  hw/riscv/sifive_u.c         | 51 ++++++++++++++++++++++++++++++++++-----------
>  include/hw/riscv/sifive_u.h |  7 +++++++
>  target/riscv/cpu.c          | 20 +++++++++---------
>  4 files changed, 62 insertions(+), 26 deletions(-)
>
> --
> 2.7.4
>
>