From: Jason Wang <jasowang@redhat.com>
To: peter.maydell@linaro.org, qemu-devel@nongnu.org
Cc: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>,
Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>,
Jason Wang <jasowang@redhat.com>, Tong Ho <tong.ho@xilinx.com>
Subject: [PULL V2 22/33] net: cadence_gem: Fix RX address filtering
Date: Thu, 18 Jun 2020 21:21:37 +0800 [thread overview]
Message-ID: <1592486508-6135-23-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1592486508-6135-1-git-send-email-jasowang@redhat.com>
From: Tong Ho <tong.ho@xilinx.com>
Two defects are fixed:
1/ Detection of multicast frames
2/ Treating drop of mis-addressed frames as non-error
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/cadence_gem.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index 78fb9ac..a93b5c0 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -34,6 +34,7 @@
#include "qemu/module.h"
#include "sysemu/dma.h"
#include "net/checksum.h"
+#include "net/eth.h"
#define CADENCE_GEM_ERR_DEBUG 0
#define DB_PRINT(...) do {\
@@ -702,7 +703,7 @@ static unsigned calc_mac_hash(const uint8_t *mac)
static int gem_mac_address_filter(CadenceGEMState *s, const uint8_t *packet)
{
uint8_t *gem_spaddr;
- int i;
+ int i, is_mc;
/* Promiscuous mode? */
if (s->regs[GEM_NWCFG] & GEM_NWCFG_PROMISC) {
@@ -718,22 +719,17 @@ static int gem_mac_address_filter(CadenceGEMState *s, const uint8_t *packet)
}
/* Accept packets -w- hash match? */
- if ((packet[0] == 0x01 && (s->regs[GEM_NWCFG] & GEM_NWCFG_MCAST_HASH)) ||
- (packet[0] != 0x01 && (s->regs[GEM_NWCFG] & GEM_NWCFG_UCAST_HASH))) {
+ is_mc = is_multicast_ether_addr(packet);
+ if ((is_mc && (s->regs[GEM_NWCFG] & GEM_NWCFG_MCAST_HASH)) ||
+ (!is_mc && (s->regs[GEM_NWCFG] & GEM_NWCFG_UCAST_HASH))) {
+ uint64_t buckets;
unsigned hash_index;
hash_index = calc_mac_hash(packet);
- if (hash_index < 32) {
- if (s->regs[GEM_HASHLO] & (1<<hash_index)) {
- return packet[0] == 0x01 ? GEM_RX_MULTICAST_HASH_ACCEPT :
- GEM_RX_UNICAST_HASH_ACCEPT;
- }
- } else {
- hash_index -= 32;
- if (s->regs[GEM_HASHHI] & (1<<hash_index)) {
- return packet[0] == 0x01 ? GEM_RX_MULTICAST_HASH_ACCEPT :
- GEM_RX_UNICAST_HASH_ACCEPT;
- }
+ buckets = ((uint64_t)s->regs[GEM_HASHHI] << 32) | s->regs[GEM_HASHLO];
+ if ((buckets >> hash_index) & 1) {
+ return is_mc ? GEM_RX_MULTICAST_HASH_ACCEPT
+ : GEM_RX_UNICAST_HASH_ACCEPT;
}
}
@@ -958,7 +954,7 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
/* Is this destination MAC address "for us" ? */
maf = gem_mac_address_filter(s, buf);
if (maf == GEM_RX_REJECT) {
- return -1;
+ return size; /* no, drop siliently b/c it's not an error */
}
/* Discard packets with receive length error enabled ? */
--
2.5.0
next prev parent reply other threads:[~2020-06-18 13:32 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-18 13:21 [PULL V2 00/33] Net patches Jason Wang
2020-06-18 13:21 ` [PULL V2 01/33] virtio-net: implement RSS configuration command Jason Wang
2020-06-18 13:21 ` [PULL V2 02/33] virtio-net: implement RX RSS processing Jason Wang
2020-06-18 13:21 ` [PULL V2 03/33] tap: allow extended virtio header with hash info Jason Wang
2020-06-18 13:21 ` [PULL V2 04/33] virtio-net: reference implementation of hash report Jason Wang
2020-06-18 13:21 ` [PULL V2 05/33] vmstate.h: provide VMSTATE_VARRAY_UINT16_ALLOC macro Jason Wang
2020-06-18 13:21 ` [PULL V2 06/33] virtio-net: add migration support for RSS and hash report Jason Wang
2020-06-18 13:21 ` [PULL V2 07/33] virtio-net: align RSC fields with updated virtio-net header Jason Wang
2020-06-18 13:21 ` [PULL V2 08/33] Fix tulip breakage Jason Wang
2020-06-18 13:21 ` [PULL V2 09/33] hw/net/tulip: Fix 'Descriptor Error' definition Jason Wang
2020-06-18 13:21 ` [PULL V2 10/33] hw/net/tulip: Log descriptor overflows Jason Wang
2020-06-18 13:21 ` [PULL V2 11/33] net: cadence_gem: Fix debug statements Jason Wang
2020-06-18 13:21 ` [PULL V2 12/33] net: cadence_gem: Fix the queue address update during wrap around Jason Wang
2020-06-18 13:21 ` [PULL V2 13/33] net: cadence_gem: Fix irq update w.r.t queue Jason Wang
2020-06-18 13:21 ` [PULL V2 14/33] net: cadence_gem: Define access permission for interrupt registers Jason Wang
2020-06-18 13:21 ` [PULL V2 15/33] net: cadence_gem: Set ISR according to queue in use Jason Wang
2020-06-18 13:21 ` [PULL V2 16/33] net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState Jason Wang
2020-06-18 13:21 ` [PULL V2 17/33] net: cadence_gem: Fix up code style Jason Wang
2020-06-18 13:21 ` [PULL V2 18/33] net: cadence_gem: Add support for jumbo frames Jason Wang
2020-06-18 13:21 ` [PULL V2 19/33] net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg Jason Wang
2020-06-18 13:21 ` [PULL V2 20/33] net: cadence_gem: Update the reset value for interrupt mask register Jason Wang
2020-06-18 13:21 ` [PULL V2 21/33] net: cadence_gem: TX_LAST bit should be set by guest Jason Wang
2020-06-18 13:21 ` Jason Wang [this message]
2020-06-18 13:21 ` [PULL V2 23/33] net: use peer when purging queue in qemu_flush_or_purge_queue_packets() Jason Wang
2020-06-18 13:21 ` [PULL V2 24/33] net/colo-compare.c: Create event_bh with the right AioContext Jason Wang
2020-06-18 13:21 ` [PULL V2 25/33] chardev/char.c: Use qemu_co_sleep_ns if in coroutine Jason Wang
2020-06-18 13:21 ` [PULL V2 26/33] net/colo-compare.c: Fix deadlock in compare_chr_send Jason Wang
2020-06-18 13:21 ` [PULL V2 27/33] net/colo-compare.c: Only hexdump packets if tracing is enabled Jason Wang
2020-06-18 13:21 ` [PULL V2 28/33] net/colo-compare.c: Check that colo-compare is active Jason Wang
2020-06-18 13:21 ` [PULL V2 29/33] net/colo-compare.c: Correct ordering in complete and finalize Jason Wang
2020-06-25 9:30 ` Peter Maydell
2020-07-03 16:10 ` Lukas Straub
2020-07-23 17:51 ` Peter Maydell
2020-06-18 13:21 ` [PULL V2 30/33] colo-compare: Fix memory leak in packet_enqueue() Jason Wang
2020-06-18 13:21 ` [PULL V2 31/33] hw/net/e1000e: Do not abort() on invalid PSRCTL register value Jason Wang
2020-06-18 13:21 ` [PULL V2 32/33] net: Drop the legacy "name" parameter from the -net option Jason Wang
2020-06-18 13:21 ` [PULL V2 33/33] net: Drop the NetLegacy structure, always use Netdev instead Jason Wang
2020-06-18 14:05 ` [PULL V2 00/33] Net patches no-reply
2020-06-19 3:19 ` Jason Wang
2020-06-19 10:45 ` Peter Maydell
2020-06-19 10:43 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592486508-6135-23-git-send-email-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=edgar.iglesias@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sai.pavan.boddu@xilinx.com \
--cc=tong.ho@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).