[PATCH 021/147] meson: use coverage option

[Paolo Bonzini <pbonzini@redhat.com>]

From: Marc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 Makefile               | 14 --------------
 Makefile.target        | 16 ----------------
 configure              |  9 ++-------
 docs/devel/testing.rst |  7 +++----
 meson.build            |  2 +-
 5 files changed, 6 insertions(+), 42 deletions(-)

diff --git a/Makefile b/Makefile
index f42cbdb..1da5927 100644
--- a/Makefile
+++ b/Makefile
@@ -765,14 +765,6 @@ module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
 	$(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
 	"GEN","$@")
 
-ifdef CONFIG_GCOV
-.PHONY: clean-coverage
-clean-coverage:
-	$(call quiet-command, \
-		find . \( -name '*.gcda' -o -name '*.gcov' \) -type f -exec rm {} +, \
-		"CLEAN", "coverage files")
-endif
-
 clean: recurse-clean
 # avoid old build problems by removing potentially incorrect old files
 	rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
@@ -1275,9 +1267,6 @@ endif
 		echo '')
 	@echo  'Cleaning targets:'
 	$(call print-help,clean,Remove most generated files but keep the config)
-ifdef CONFIG_GCOV
-	$(call print-help,clean-coverage,Remove coverage files)
-endif
 	$(call print-help,distclean,Remove all generated files)
 	$(call print-help,dist,Build a distributable tarball)
 	@echo  ''
@@ -1288,9 +1277,6 @@ endif
 	@echo  ''
 	@echo  'Documentation targets:'
 	$(call print-help,html info pdf txt,Build documentation in specified format)
-ifdef CONFIG_GCOV
-	$(call print-help,coverage-report,Create code coverage report)
-endif
 	@echo  ''
 ifdef CONFIG_WIN32
 	@echo  'Windows targets:'
diff --git a/Makefile.target b/Makefile.target
index ffa2657..d61a6a9 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -269,19 +269,3 @@ endif
 
 generated-files-y += config-target.h
 Makefile: $(generated-files-y)
-
-# Reports/Analysis
-#
-# The target specific coverage report only cares about target specific
-# blobs and not the shared code.
-#
-
-%/coverage-report.html:
-	@mkdir -p $*
-	$(call quiet-command,\
-		gcovr -r $(SRC_PATH) --object-directory $(CURDIR) \
-		-p --html --html-details -o $@, \
-		"GEN", "coverage-report.html")
-
-.PHONY: coverage-report
-coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
diff --git a/configure b/configure
index 91f518a..94cf0a3 100755
--- a/configure
+++ b/configure
@@ -424,7 +424,6 @@ tcg_interpreter="no"
 bigendian="no"
 mingw32="no"
 gcov="no"
-gcov_tool="gcov"
 EXESUF=""
 DSOSUF=".so"
 LDFLAGS_SHARED="-shared"
@@ -1008,8 +1007,6 @@ for opt do
   ;;
   --meson=*) meson="$optarg"
   ;;
-  --gcov=*) gcov_tool="$optarg"
-  ;;
   --smbd=*) smbd="$optarg"
   ;;
   --extra-cflags=*)
@@ -1816,7 +1813,6 @@ Advanced options (experts only):
   --with-coroutine=BACKEND coroutine backend. Supported options:
                            ucontext, sigaltstack, windows
   --enable-gcov            enable test coverage analysis with gcov
-  --gcov=GCOV              use specified gcov [$gcov_tool]
   --disable-blobs          disable installing provided firmware blobs
   --with-vss-sdk=SDK-path  enable Windows VSS support in QEMU Guest Agent
   --with-win-sdk=SDK-path  path to Windows Platform SDK (to build VSS .tlb)
@@ -6535,8 +6531,7 @@ fi
 write_c_skeleton
 
 if test "$gcov" = "yes" ; then
-  QEMU_CFLAGS="-fprofile-arcs -ftest-coverage -g $QEMU_CFLAGS"
-  QEMU_LDFLAGS="-fprofile-arcs -ftest-coverage $QEMU_LDFLAGS"
+  :
 elif test "$fortify_source" = "yes" ; then
   QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
   debug=no
@@ -7809,7 +7804,6 @@ echo "TASN1_CFLAGS=$tasn1_cflags" >> $config_host_mak
 echo "POD2MAN=$POD2MAN" >> $config_host_mak
 if test "$gcov" = "yes" ; then
   echo "CONFIG_GCOV=y" >> $config_host_mak
-  echo "GCOV=$gcov_tool" >> $config_host_mak
 fi
 
 if test "$libudev" != "no"; then
@@ -8449,6 +8443,7 @@ NINJA=$PWD/ninjatool $meson setup \
         -Dwerror=$(if test "$werror" = yes; then echo true; else echo false; fi) \
         -Dstrip=$(if test "$strip_opt" = yes; then echo true; else echo false; fi) \
         -Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \
+        -Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
         $cross_arg \
         "$PWD" "$source_path"
 
diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
index c1ff243..a426469 100644
--- a/docs/devel/testing.rst
+++ b/docs/devel/testing.rst
@@ -164,13 +164,12 @@ instrumenting the tested code. To use it, configure QEMU with
 ``--enable-gcov`` option and build. Then run ``make check`` as usual.
 
 If you want to gather coverage information on a single test the ``make
-clean-coverage`` target can be used to delete any existing coverage
+clean-gcda`` target can be used to delete any existing coverage
 information before running a single test.
 
 You can generate a HTML coverage report by executing ``make
-coverage-report`` which will create
-./reports/coverage/coverage-report.html. If you want to create it
-elsewhere simply execute ``make /foo/bar/baz/coverage-report.html``.
+coverage-html`` which will create
+``meson-logs/coveragereport/index.html``.
 
 Further analysis can be conducted by running the ``gcov`` command
 directly on the various .gcda output files. Please read the ``gcov``
diff --git a/meson.build b/meson.build
index cc08534..b368929 100644
--- a/meson.build
+++ b/meson.build
@@ -199,7 +199,7 @@ summary_info += {'debug stack usage': config_host.has_key('CONFIG_DEBUG_STACK_US
 summary_info += {'mutex debugging':   config_host.has_key('CONFIG_DEBUG_MUTEX')}
 summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
 summary_info += {'GlusterFS support': config_host.has_key('CONFIG_GLUSTERFS')}
-summary_info += {'gcov':              config_host.has_key('CONFIG_GCOV')}
+summary_info += {'gcov':              get_option('b_coverage')}
 summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
 summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
 summary_info += {'QOM debugging':     config_host.has_key('CONFIG_QOM_CAST_DEBUG')}
-- 
1.8.3.1