[PATCH 13/18] hw/riscv: microchip_pfsoc: Connect a DMA controller

[Bin Meng <bmeng.cn@gmail.com>]

From: Bin Meng <bin.meng@windriver.com>

Connect a DMA controller to Microchip PolarFire SoC. Note interrupt
has not been connected due to missing information in the manual how
interrupts are routed to PLIC.

On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA
controller to move the 2nd stage bootloader in the system memory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
---

 hw/riscv/Kconfig                   |  1 +
 hw/riscv/microchip_pfsoc.c         | 10 ++++++++++
 include/hw/riscv/microchip_pfsoc.h |  3 +++
 3 files changed, 14 insertions(+)

diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 7412db9..9323701 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -55,4 +55,5 @@ config MICROCHIP_PFSOC
     select SIFIVE
     select UNIMP
     select MCHP_PFSOC_MMUART
+    select MCHP_PFSOC_DMA
     select CADENCE_SDHCI
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index 7c09078..1c67cbc 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -13,6 +13,7 @@
  * 2) eNVM (Embedded Non-Volatile Memory)
  * 3) MMUARTs (Multi-Mode UART)
  * 4) Cadence eMMC/SDHC controller and an SD card connected to it
+ * 5) DMA (Direct Memory Access Controller)
  *
  * This board currently generates devicetree dynamically that indicates at least
  * two harts and up to five harts.
@@ -71,6 +72,7 @@ static const struct MemmapEntry {
     [MICROCHIP_PFSOC_BUSERR_UNIT4] =    {  0x1704000,     0x1000 },
     [MICROCHIP_PFSOC_CLINT] =           {  0x2000000,    0x10000 },
     [MICROCHIP_PFSOC_L2CC] =            {  0x2010000,     0x1000 },
+    [MICROCHIP_PFSOC_DMA] =             {  0x3000000,   0x100000 },
     [MICROCHIP_PFSOC_L2LIM] =           {  0x8000000,  0x2000000 },
     [MICROCHIP_PFSOC_PLIC] =            {  0xc000000,  0x4000000 },
     [MICROCHIP_PFSOC_MMUART0] =         { 0x20000000,     0x1000 },
@@ -114,6 +116,9 @@ static void microchip_pfsoc_soc_instance_init(Object *obj)
                          TYPE_RISCV_CPU_SIFIVE_U54);
     qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR);
 
+    object_initialize_child(obj, "dma-controller", &s->dma,
+                            TYPE_MCHP_PFSOC_DMA);
+
     object_initialize_child(obj, "sd-controller", &s->sdhci,
                             TYPE_CADENCE_SDHCI);
     object_initialize_child(OBJECT(&s->sdhci), "sd-controller.sdhci",
@@ -220,6 +225,11 @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
         memmap[MICROCHIP_PFSOC_PLIC].size);
     g_free(plic_hart_config);
 
+    /* DMA */
+    sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0,
+                    memmap[MICROCHIP_PFSOC_DMA].base);
+
     /* SYSREG */
     create_unimplemented_device("microchip.pfsoc.sysreg",
         memmap[MICROCHIP_PFSOC_SYSREG].base,
diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h
index d810ee8..7825935 100644
--- a/include/hw/riscv/microchip_pfsoc.h
+++ b/include/hw/riscv/microchip_pfsoc.h
@@ -23,6 +23,7 @@
 #define HW_MICROCHIP_PFSOC_H
 
 #include "hw/char/mchp_pfsoc_mmuart.h"
+#include "hw/dma/mchp_pfsoc_dma.h"
 #include "hw/sd/cadence_sdhci.h"
 
 typedef struct MicrochipPFSoCState {
@@ -40,6 +41,7 @@ typedef struct MicrochipPFSoCState {
     MchpPfSoCMMUartState *serial2;
     MchpPfSoCMMUartState *serial3;
     MchpPfSoCMMUartState *serial4;
+    MchpPfSoCDMAState dma;
     CadenceSDHCIState sdhci;
 } MicrochipPFSoCState;
 
@@ -71,6 +73,7 @@ enum {
     MICROCHIP_PFSOC_BUSERR_UNIT4,
     MICROCHIP_PFSOC_CLINT,
     MICROCHIP_PFSOC_L2CC,
+    MICROCHIP_PFSOC_DMA,
     MICROCHIP_PFSOC_L2LIM,
     MICROCHIP_PFSOC_PLIC,
     MICROCHIP_PFSOC_MMUART0,
-- 
2.7.4