[PATCH v3 00/16] hw/riscv: Add Microchip PolarFire SoC Icicle Kit board support

[Bin Meng <bmeng.cn@gmail.com>]

From: Bin Meng <bin.meng@windriver.com>

This adds support for Microchip PolarFire SoC Icicle Kit board.
The Icicle Kit board integrates a PolarFire SoC, with one SiFive's
E51 plus four U54 cores and many on-chip peripherals and an FPGA.

For more details about Microchip PolarFire SoC, please see:
https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga

The Icicle Kit board information can be found here:
https://www.microsemi.com/existing-parts/parts/152514

Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000.
The RISC-V CPU and HART codes has been updated to set the core's
reset vector based on a configurable property from machine codes.

The following perepherals are created as an unimplemented device:

- Bus Error Uint 0/1/2/3/4
- L2 cache controller
- SYSREG
- MPUCFG
- IOSCBCFG
- GPIO

The following perepherals are emulated:
- SiFive CLINT
- SiFive PLIC
- PolarFire SoC Multi-Mode UART
- SiFive PDMA
- Cadence eMMC/SDHCI controller
- Cadence Gigabit Ethernet MAC

The BIOS image used by this machine is hss.bin, aka Hart Software
Services, which can be built from:
https://github.com/polarfire-soc/hart-software-services

To launch this machine:
$ qemu-system-riscv64 -M microchip-icicle-kit -smp 5 \
    -bios path/to/hss.bin -sd path/to/sdcard.img \
    -nic tap,ifname=tap,script=no,model=cadence_gem \
    -display none -serial stdio \
    -chardev socket,id=serial1,path=serial1.sock,server,wait \
    -serial chardev:serial1

The memory is set to 1 GiB by default to match the hardware.
A sanity check on ram size is performed in the machine init routine
to prompt user to increase the RAM size to > 1 GiB when less than
1 GiB ram is detected.

HSS output is on the first serial port (stdio) and U-Boot/Linux
outputs on the 2nd serial port. OpenSBI outputs on a random serial
port due to the lottery mechanism used during the multi-core boot.

Please check the QEMU WiKi page for the target specific information:
https://wiki.qemu.org/Documentation/Platforms/RISCV#Microchip_PolarFire_SoC_Icicle_Kit

Changes in v3:
- rebase on qemu/master
- change MCHP_PFSOC_DMA to SIFIVE_PDMA
- use the correct (Object *) to set the 'phy-addr' in xlnx-zynqmp.c

Changes in v2:
- change to update hw/char/meson.build
- add impl.min_access_size and impl.max_access_size as part of
  MemoryRegionOps and remove the allignment check
- change to update hw/sd/meson.build
- change the name to "generic-sdhci" when calling object_initialize_child()
- add a container MR to simplify out-of-bounds access checks
- do not initialize TYPE_SYSBUS_SDHCI in the SoC instance_init(),
  instead move that to the cadence_sdhci model
- do not access generic-sdhci's state directly,
  instead move that to the cadence_sdhci model
- change to update hw/dma/meson.build
- rename the file names to sifive_pdma.[c|h]
- update irq number to 8 per the SiFive FU540 manual
- fix the register offset for channel 1/2/3 in the read/write ops
- connect 8 IRQs to the PLIC
- change "phy-addr" default value to BOARD_PHY_ADDRESS

Bin Meng (16):
  target/riscv: cpu: Add a new 'resetvec' property
  hw/riscv: hart: Add a new 'resetvec' property
  target/riscv: cpu: Set reset vector based on the configured property
    value
  hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board
  hw/char: Add Microchip PolarFire SoC MMUART emulation
  hw/riscv: microchip_pfsoc: Connect 5 MMUARTs
  hw/sd: Add Cadence SDHCI emulation
  hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an
    SD card
  hw/dma: Add SiFive platform DMA controller emulation
  hw/riscv: microchip_pfsoc: Connect a DMA controller
  hw/net: cadence_gem: Add a new 'phy-addr' property
  hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
  hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
  hw/riscv: microchip_pfsoc: Hook GPIO controllers
  hw/riscv: clint: Avoid using hard-coded timebase frequency
  hw/riscv: sifive_u: Connect a DMA controller

 default-configs/riscv64-softmmu.mak |   1 +
 include/hw/char/mchp_pfsoc_mmuart.h |  61 +++++
 include/hw/dma/sifive_pdma.h        |  57 +++++
 include/hw/net/cadence_gem.h        |   2 +
 include/hw/riscv/microchip_pfsoc.h  | 133 +++++++++++
 include/hw/riscv/riscv_hart.h       |   1 +
 include/hw/riscv/sifive_clint.h     |   4 +-
 include/hw/riscv/sifive_u.h         |  11 +
 include/hw/sd/cadence_sdhci.h       |  47 ++++
 target/riscv/cpu.h                  |   7 +-
 hw/arm/xilinx_zynq.c                |   1 +
 hw/arm/xlnx-versal.c                |   1 +
 hw/arm/xlnx-zynqmp.c                |   2 +
 hw/char/mchp_pfsoc_mmuart.c         |  86 +++++++
 hw/dma/sifive_pdma.c                | 313 ++++++++++++++++++++++++++
 hw/net/cadence_gem.c                |   7 +-
 hw/riscv/microchip_pfsoc.c          | 437 ++++++++++++++++++++++++++++++++++++
 hw/riscv/opentitan.c                |   1 +
 hw/riscv/riscv_hart.c               |   3 +
 hw/riscv/sifive_clint.c             |  26 ++-
 hw/riscv/sifive_e.c                 |   4 +-
 hw/riscv/sifive_u.c                 |  35 ++-
 hw/riscv/spike.c                    |   3 +-
 hw/riscv/virt.c                     |   3 +-
 hw/sd/cadence_sdhci.c               | 193 ++++++++++++++++
 target/riscv/cpu.c                  |   8 +-
 target/riscv/cpu_helper.c           |   4 +-
 target/riscv/csr.c                  |   4 +-
 MAINTAINERS                         |   9 +
 hw/char/Kconfig                     |   3 +
 hw/char/meson.build                 |   1 +
 hw/dma/Kconfig                      |   3 +
 hw/dma/meson.build                  |   1 +
 hw/riscv/Kconfig                    |  10 +
 hw/riscv/meson.build                |   1 +
 hw/sd/Kconfig                       |   4 +
 hw/sd/meson.build                   |   1 +
 37 files changed, 1459 insertions(+), 29 deletions(-)
 create mode 100644 include/hw/char/mchp_pfsoc_mmuart.h
 create mode 100644 include/hw/dma/sifive_pdma.h
 create mode 100644 include/hw/riscv/microchip_pfsoc.h
 create mode 100644 include/hw/sd/cadence_sdhci.h
 create mode 100644 hw/char/mchp_pfsoc_mmuart.c
 create mode 100644 hw/dma/sifive_pdma.c
 create mode 100644 hw/riscv/microchip_pfsoc.c
 create mode 100644 hw/sd/cadence_sdhci.c

-- 
2.7.4