* [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
@ 2020-10-15 13:16 Matthew Rosato
2020-10-15 13:32 ` Christian Borntraeger
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Matthew Rosato @ 2020-10-15 13:16 UTC (permalink / raw)
To: qemu-devel
Cc: thuth, pmorel, david, cohuck, schnelle, farman, pasic,
borntraeger, qemu-s390x, rth
Currently, a subsystem reset event leaves PCI devices enabled, causing
issues post-reset in the guest (an example would be after a kexec). These
devices need to be reset during a subsystem reset, allowing them to be
properly re-enabled afterwards. Add the S390 PCI host bridge to the list
of qdevs to be reset during subsystem reset.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
---
hw/s390x/s390-virtio-ccw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
index e52182f..2e90033 100644
--- a/hw/s390x/s390-virtio-ccw.c
+++ b/hw/s390x/s390-virtio-ccw.c
@@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
"s390-sclp-event-facility",
"s390-flic",
"diag288",
+ TYPE_S390_PCI_HOST_BRIDGE,
};
static void subsystem_reset(void)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
2020-10-15 13:16 [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset Matthew Rosato
@ 2020-10-15 13:32 ` Christian Borntraeger
2020-10-15 13:34 ` Christian Borntraeger
2020-10-16 15:36 ` Halil Pasic
2020-10-20 9:57 ` Cornelia Huck
2 siblings, 1 reply; 7+ messages in thread
From: Christian Borntraeger @ 2020-10-15 13:32 UTC (permalink / raw)
To: Matthew Rosato, qemu-devel
Cc: thuth, pmorel, david, cohuck, schnelle, farman, pasic, qemu-s390x,
rth
On 15.10.20 15:16, Matthew Rosato wrote:
> Currently, a subsystem reset event leaves PCI devices enabled, causing
> issues post-reset in the guest (an example would be after a kexec). These
> devices need to be reset during a subsystem reset, allowing them to be
> properly re-enabled afterwards. Add the S390 PCI host bridge to the list
> of qdevs to be reset during subsystem reset.
>
> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
> Reviewed-by: Eric Farman <farman@linux.ibm.com>
Makese sense.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
> ---
> hw/s390x/s390-virtio-ccw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
> index e52182f..2e90033 100644
> --- a/hw/s390x/s390-virtio-ccw.c
> +++ b/hw/s390x/s390-virtio-ccw.c
> @@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
> "s390-sclp-event-facility",
> "s390-flic",
> "diag288",
> + TYPE_S390_PCI_HOST_BRIDGE,
> };
>
> static void subsystem_reset(void)
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
2020-10-15 13:32 ` Christian Borntraeger
@ 2020-10-15 13:34 ` Christian Borntraeger
2020-10-15 13:37 ` Niklas Schnelle
0 siblings, 1 reply; 7+ messages in thread
From: Christian Borntraeger @ 2020-10-15 13:34 UTC (permalink / raw)
To: Matthew Rosato, qemu-devel
Cc: thuth, pmorel, david, cohuck, schnelle, farman, pasic, qemu-s390x,
rth
On 15.10.20 15:32, Christian Borntraeger wrote:
>
>
> On 15.10.20 15:16, Matthew Rosato wrote:
>> Currently, a subsystem reset event leaves PCI devices enabled, causing
>> issues post-reset in the guest (an example would be after a kexec). These
>> devices need to be reset during a subsystem reset, allowing them to be
>> properly re-enabled afterwards. Add the S390 PCI host bridge to the list
>> of qdevs to be reset during subsystem reset.
>>
>> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
>> Reviewed-by: Eric Farman <farman@linux.ibm.com>
>
> Makese sense.
> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
A question. Is this a stable candidate?
>
>
>> ---
>> hw/s390x/s390-virtio-ccw.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
>> index e52182f..2e90033 100644
>> --- a/hw/s390x/s390-virtio-ccw.c
>> +++ b/hw/s390x/s390-virtio-ccw.c
>> @@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
>> "s390-sclp-event-facility",
>> "s390-flic",
>> "diag288",
>> + TYPE_S390_PCI_HOST_BRIDGE,
>> };
>>
>> static void subsystem_reset(void)
>>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
2020-10-15 13:34 ` Christian Borntraeger
@ 2020-10-15 13:37 ` Niklas Schnelle
2020-10-15 13:45 ` Matthew Rosato
0 siblings, 1 reply; 7+ messages in thread
From: Niklas Schnelle @ 2020-10-15 13:37 UTC (permalink / raw)
To: Christian Borntraeger, Matthew Rosato, qemu-devel
Cc: thuth, pmorel, david, cohuck, farman, pasic, qemu-s390x, rth
On 10/15/20 3:34 PM, Christian Borntraeger wrote:
>
>
> On 15.10.20 15:32, Christian Borntraeger wrote:
>>
>>
>> On 15.10.20 15:16, Matthew Rosato wrote:
>>> Currently, a subsystem reset event leaves PCI devices enabled, causing
>>> issues post-reset in the guest (an example would be after a kexec). These
>>> devices need to be reset during a subsystem reset, allowing them to be
>>> properly re-enabled afterwards. Add the S390 PCI host bridge to the list
>>> of qdevs to be reset during subsystem reset.
>>>
>>> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
>>> Reviewed-by: Eric Farman <farman@linux.ibm.com>
>>
>> Makese sense.
>> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
>
> A question. Is this a stable candidate?
As this can prevent a SUSE guest (which does kexec during boot because of grub)
from seeing any PCI devices I'd say yes.
>
>>
>>
>>> ---
>>> hw/s390x/s390-virtio-ccw.c | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
>>> index e52182f..2e90033 100644
>>> --- a/hw/s390x/s390-virtio-ccw.c
>>> +++ b/hw/s390x/s390-virtio-ccw.c
>>> @@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
>>> "s390-sclp-event-facility",
>>> "s390-flic",
>>> "diag288",
>>> + TYPE_S390_PCI_HOST_BRIDGE,
>>> };
>>>
>>> static void subsystem_reset(void)
>>>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
2020-10-15 13:37 ` Niklas Schnelle
@ 2020-10-15 13:45 ` Matthew Rosato
0 siblings, 0 replies; 7+ messages in thread
From: Matthew Rosato @ 2020-10-15 13:45 UTC (permalink / raw)
To: Niklas Schnelle, Christian Borntraeger, qemu-devel
Cc: thuth, pmorel, david, cohuck, farman, pasic, qemu-s390x, rth
On 10/15/20 9:37 AM, Niklas Schnelle wrote:
>
>
> On 10/15/20 3:34 PM, Christian Borntraeger wrote:
>>
>>
>> On 15.10.20 15:32, Christian Borntraeger wrote:
>>>
>>>
>>> On 15.10.20 15:16, Matthew Rosato wrote:
>>>> Currently, a subsystem reset event leaves PCI devices enabled, causing
>>>> issues post-reset in the guest (an example would be after a kexec). These
>>>> devices need to be reset during a subsystem reset, allowing them to be
>>>> properly re-enabled afterwards. Add the S390 PCI host bridge to the list
>>>> of qdevs to be reset during subsystem reset.
>>>>
>>>> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
>>>> Reviewed-by: Eric Farman <farman@linux.ibm.com>
>>>
>>> Makese sense.
>>> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
>>
>> A question. Is this a stable candidate?
>
> As this can prevent a SUSE guest (which does kexec during boot because of grub)
> from seeing any PCI devices I'd say yes.
>
Yes, agreed.
>>
>>>
>>>
>>>> ---
>>>> hw/s390x/s390-virtio-ccw.c | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
>>>> index e52182f..2e90033 100644
>>>> --- a/hw/s390x/s390-virtio-ccw.c
>>>> +++ b/hw/s390x/s390-virtio-ccw.c
>>>> @@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
>>>> "s390-sclp-event-facility",
>>>> "s390-flic",
>>>> "diag288",
>>>> + TYPE_S390_PCI_HOST_BRIDGE,
>>>> };
>>>>
>>>> static void subsystem_reset(void)
>>>>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
2020-10-15 13:16 [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset Matthew Rosato
2020-10-15 13:32 ` Christian Borntraeger
@ 2020-10-16 15:36 ` Halil Pasic
2020-10-20 9:57 ` Cornelia Huck
2 siblings, 0 replies; 7+ messages in thread
From: Halil Pasic @ 2020-10-16 15:36 UTC (permalink / raw)
To: Matthew Rosato
Cc: thuth, pmorel, schnelle, farman, cohuck, david, qemu-devel,
borntraeger, qemu-s390x, rth
On Thu, 15 Oct 2020 09:16:07 -0400
Matthew Rosato <mjrosato@linux.ibm.com> wrote:
> Currently, a subsystem reset event leaves PCI devices enabled, causing
> issues post-reset in the guest (an example would be after a kexec). These
> devices need to be reset during a subsystem reset, allowing them to be
> properly re-enabled afterwards. Add the S390 PCI host bridge to the list
> of qdevs to be reset during subsystem reset.
>
> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
> Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
> ---
> hw/s390x/s390-virtio-ccw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
> index e52182f..2e90033 100644
> --- a/hw/s390x/s390-virtio-ccw.c
> +++ b/hw/s390x/s390-virtio-ccw.c
> @@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
> "s390-sclp-event-facility",
> "s390-flic",
> "diag288",
> + TYPE_S390_PCI_HOST_BRIDGE,
> };
>
> static void subsystem_reset(void)
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset
2020-10-15 13:16 [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset Matthew Rosato
2020-10-15 13:32 ` Christian Borntraeger
2020-10-16 15:36 ` Halil Pasic
@ 2020-10-20 9:57 ` Cornelia Huck
2 siblings, 0 replies; 7+ messages in thread
From: Cornelia Huck @ 2020-10-20 9:57 UTC (permalink / raw)
To: Matthew Rosato
Cc: thuth, pmorel, david, farman, schnelle, qemu-devel, pasic,
borntraeger, qemu-s390x, rth
On Thu, 15 Oct 2020 09:16:07 -0400
Matthew Rosato <mjrosato@linux.ibm.com> wrote:
> Currently, a subsystem reset event leaves PCI devices enabled, causing
> issues post-reset in the guest (an example would be after a kexec). These
> devices need to be reset during a subsystem reset, allowing them to be
> properly re-enabled afterwards. Add the S390 PCI host bridge to the list
> of qdevs to be reset during subsystem reset.
>
> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
> Reviewed-by: Eric Farman <farman@linux.ibm.com>
> ---
> hw/s390x/s390-virtio-ccw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
> index e52182f..2e90033 100644
> --- a/hw/s390x/s390-virtio-ccw.c
> +++ b/hw/s390x/s390-virtio-ccw.c
> @@ -101,6 +101,7 @@ static const char *const reset_dev_types[] = {
> "s390-sclp-event-facility",
> "s390-flic",
> "diag288",
> + TYPE_S390_PCI_HOST_BRIDGE,
> };
>
> static void subsystem_reset(void)
Thanks, applied (with cc:stable added.)
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-10-20 9:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-10-15 13:16 [PATCH] s390x/s390-virtio-ccw: Reset PCI devices during subsystem reset Matthew Rosato
2020-10-15 13:32 ` Christian Borntraeger
2020-10-15 13:34 ` Christian Borntraeger
2020-10-15 13:37 ` Niklas Schnelle
2020-10-15 13:45 ` Matthew Rosato
2020-10-16 15:36 ` Halil Pasic
2020-10-20 9:57 ` Cornelia Huck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).