[PATCH v2 03/22] sd: emmc: Add support for eMMC cards

[Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>]

From: Vincent Palatin <vpalatin@chromium.org>

This patch adds support for eMMC cards, change SET_RELATIVE_ADDR
command to assign relative address as requested by user.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[spb: Split original patch series]
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
---
 hw/sd/sd.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 74b9162..42ee49c 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -108,6 +108,7 @@ struct SDState {
     uint8_t spec_version;
     BlockBackend *blk;
     bool spi;
+    bool emmc;
 
     /* Runtime changeables */
 
@@ -431,9 +432,13 @@ static void sd_set_csd(SDState *sd, uint64_t size)
     sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1;
 }
 
-static void sd_set_rca(SDState *sd)
+static void sd_set_rca(SDState *sd, uint16_t value)
 {
-    sd->rca += 0x4567;
+    if (sd->emmc) {
+        sd->rca = value;
+    } else {
+        sd->rca += 0x4567;
+    }
 }
 
 FIELD(CSR, AKE_SEQ_ERROR,               3,  1)
@@ -979,8 +984,8 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
         case sd_identification_state:
         case sd_standby_state:
             sd->state = sd_standby_state;
-            sd_set_rca(sd);
-            return sd_r6;
+            sd_set_rca(sd, req.arg >> 16);
+            return sd->emmc ? sd_r1 : sd_r6;
 
         default:
             break;
@@ -2176,6 +2181,7 @@ static Property sd_properties[] = {
      * board to ensure that ssi transfers only occur when the chip select
      * is asserted.  */
     DEFINE_PROP_BOOL("spi", SDState, spi, false),
+    DEFINE_PROP_BOOL("emmc", SDState, emmc, false),
     DEFINE_PROP_END_OF_LIST()
 };
 
-- 
2.7.4