From: Taylor Simpson <tsimpson@quicinc.com>
To: qemu-devel@nongnu.org
Cc: ale@rev.ng, bcain@quicinc.com, tsimpson@quicinc.com,
richard.henderson@linaro.org, f4bug@amsat.org
Subject: [PATCH 2/2] Hexagon (target/hexagon) put writes to USR into temp until commit
Date: Tue, 12 Oct 2021 04:31:21 -0500 [thread overview]
Message-ID: <1634031081-25450-4-git-send-email-tsimpson@quicinc.com> (raw)
In-Reply-To: <1634031081-25450-1-git-send-email-tsimpson@quicinc.com>
Change SET_USR_FIELD to write to hex_new_value[HEX_REG_USR] instead
of hex_gpr[HEX_REG_USR].
Then, we need code to mark the instructions that can set implicitly
set USR
- Macros added to hex_common.py
- A_FPOP added in translate.c
Test case added in tests/tcg/hexagon/overflow.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
---
target/hexagon/macros.h | 2 +-
target/hexagon/attribs_def.h.inc | 1 +
target/hexagon/translate.c | 9 +++-
tests/tcg/hexagon/overflow.c | 107 ++++++++++++++++++++++++++++++++++++++
target/hexagon/hex_common.py | 2 +
tests/tcg/hexagon/Makefile.target | 1 +
6 files changed, 120 insertions(+), 2 deletions(-)
create mode 100644 tests/tcg/hexagon/overflow.c
diff --git a/target/hexagon/macros.h b/target/hexagon/macros.h
index 5c19cde..13e957b 100644
--- a/target/hexagon/macros.h
+++ b/target/hexagon/macros.h
@@ -62,7 +62,7 @@
reg_field_info[FIELD].offset)
#define SET_USR_FIELD(FIELD, VAL) \
- fINSERT_BITS(env->gpr[HEX_REG_USR], reg_field_info[FIELD].width, \
+ fINSERT_BITS(env->new_value[HEX_REG_USR], reg_field_info[FIELD].width, \
reg_field_info[FIELD].offset, (VAL))
#endif
diff --git a/target/hexagon/attribs_def.h.inc b/target/hexagon/attribs_def.h.inc
index 3815509..e44a7ea 100644
--- a/target/hexagon/attribs_def.h.inc
+++ b/target/hexagon/attribs_def.h.inc
@@ -64,6 +64,7 @@ DEF_ATTRIB(IMPLICIT_WRITES_P1, "Writes Predicate 1", "", "UREG.P1")
DEF_ATTRIB(IMPLICIT_WRITES_P2, "Writes Predicate 1", "", "UREG.P2")
DEF_ATTRIB(IMPLICIT_WRITES_P3, "May write Predicate 3", "", "UREG.P3")
DEF_ATTRIB(IMPLICIT_READS_PC, "Reads the PC register", "", "")
+DEF_ATTRIB(IMPLICIT_WRITES_USR, "May write USR", "", "")
DEF_ATTRIB(WRITES_PRED_REG, "Writes a predicate register", "", "")
DEF_ATTRIB(CRSLOT23, "Can execute in slot 2 or slot 3 (CR)", "", "")
diff --git a/target/hexagon/translate.c b/target/hexagon/translate.c
index e065092..f1760ce 100644
--- a/target/hexagon/translate.c
+++ b/target/hexagon/translate.c
@@ -208,7 +208,12 @@ static void mark_implicit_reg_write(DisasContext *ctx, Insn *insn,
int attrib, int rnum)
{
if (GET_ATTRIB(insn->opcode, attrib)) {
- bool is_predicated = GET_ATTRIB(insn->opcode, A_CONDEXEC);
+ /*
+ * USR is used to set overflow and FP exceptions,
+ * so treat it as conditional
+ */
+ bool is_predicated = GET_ATTRIB(insn->opcode, A_CONDEXEC) ||
+ rnum == HEX_REG_USR;
if (is_predicated && !is_preloaded(ctx, rnum)) {
tcg_gen_mov_tl(hex_new_value[rnum], hex_gpr[rnum]);
}
@@ -234,6 +239,8 @@ static void mark_implicit_reg_writes(DisasContext *ctx, Insn *insn)
mark_implicit_reg_write(ctx, insn, A_IMPLICIT_WRITES_SA0, HEX_REG_SA0);
mark_implicit_reg_write(ctx, insn, A_IMPLICIT_WRITES_LC1, HEX_REG_LC1);
mark_implicit_reg_write(ctx, insn, A_IMPLICIT_WRITES_SA1, HEX_REG_SA1);
+ mark_implicit_reg_write(ctx, insn, A_IMPLICIT_WRITES_USR, HEX_REG_USR);
+ mark_implicit_reg_write(ctx, insn, A_FPOP, HEX_REG_USR);
}
static void mark_implicit_pred_writes(DisasContext *ctx, Insn *insn)
diff --git a/tests/tcg/hexagon/overflow.c b/tests/tcg/hexagon/overflow.c
new file mode 100644
index 0000000..196fcf7
--- /dev/null
+++ b/tests/tcg/hexagon/overflow.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright(c) 2021 Qualcomm Innovation Center, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <setjmp.h>
+#include <signal.h>
+
+
+int err;
+
+static void __check(const char *filename, int line, int x, int expect)
+{
+ if (x != expect) {
+ printf("ERROR %s:%d - %d != %d\n",
+ filename, line, x, expect);
+ err++;
+ }
+}
+
+#define check(x, expect) __check(__FILE__, __LINE__, (x), (expect))
+
+static int satub(int src, int *p, int *ovf_result)
+{
+ int result;
+ int usr;
+
+ /*
+ * This instruction can set bit 0 (OVF/overflow) in usr
+ * Clear the bit first, then return that bit to the caller
+ *
+ * We also store the src into *p in the same packet, so we
+ * can ensure the overflow doesn't get set when an exception
+ * is generated.
+ */
+ asm volatile("r2 = usr\n\t"
+ "r2 = clrbit(r2, #0)\n\t" /* clear overflow bit */
+ "usr = r2\n\t"
+ "{\n\t"
+ " %0 = satub(%2)\n\t"
+ " memw(%3) = %2\n\t"
+ "}\n\t"
+ "%1 = usr\n\t"
+ : "=r"(result), "=r"(usr)
+ : "r"(src), "r"(p)
+ : "r2", "usr", "memory");
+ *ovf_result = (usr & 1);
+ return result;
+}
+
+int read_usr_overflow(void)
+{
+ int result;
+ asm volatile("%0 = usr\n\t" : "=r"(result));
+ return result & 1;
+}
+
+
+jmp_buf jmp_env;
+int usr_overflow;
+
+static void sig_segv(int sig, siginfo_t *info, void *puc)
+{
+ usr_overflow = read_usr_overflow();
+ longjmp(jmp_env, 1);
+}
+
+int main()
+{
+ struct sigaction act;
+ int ovf;
+
+ /* SIGSEGV test */
+ act.sa_sigaction = sig_segv;
+ sigemptyset(&act.sa_mask);
+ act.sa_flags = SA_SIGINFO;
+ sigaction(SIGSEGV, &act, NULL);
+ if (setjmp(jmp_env) == 0) {
+ satub(300, 0, &ovf);
+ }
+
+ act.sa_handler = SIG_DFL;
+ sigemptyset(&act.sa_mask);
+ act.sa_flags = 0;
+
+ check(usr_overflow, 0);
+
+ puts(err ? "FAIL" : "PASS");
+ return err ? EXIT_FAILURE : EXIT_SUCCESS;
+}
diff --git a/target/hexagon/hex_common.py b/target/hexagon/hex_common.py
index b3b5340..a84b003 100755
--- a/target/hexagon/hex_common.py
+++ b/target/hexagon/hex_common.py
@@ -73,6 +73,8 @@ def calculate_attribs():
add_qemu_macro_attrib('fWRITE_P1', 'A_WRITES_PRED_REG')
add_qemu_macro_attrib('fWRITE_P2', 'A_WRITES_PRED_REG')
add_qemu_macro_attrib('fWRITE_P3', 'A_WRITES_PRED_REG')
+ add_qemu_macro_attrib('fSET_OVERFLOW', 'A_IMPLICIT_WRITES_USR')
+ add_qemu_macro_attrib('fSET_LPCFG', 'A_IMPLICIT_WRITES_USR')
# Recurse down macros, find attributes from sub-macros
macroValues = list(macros.values())
diff --git a/tests/tcg/hexagon/Makefile.target b/tests/tcg/hexagon/Makefile.target
index c1e1650..8b07a28 100644
--- a/tests/tcg/hexagon/Makefile.target
+++ b/tests/tcg/hexagon/Makefile.target
@@ -40,5 +40,6 @@ HEX_TESTS += load_unpack
HEX_TESTS += load_align
HEX_TESTS += atomics
HEX_TESTS += fpstuff
+HEX_TESTS += overflow
TESTS += $(HEX_TESTS)
--
2.7.4
next prev parent reply other threads:[~2021-10-12 9:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-12 9:31 [PATCH 0/2] Hexagon (target/hexagon) cleanup and bug fix Taylor Simpson
2021-10-12 9:31 ` [PATCH 1/2] Hexagon (target/hexagon) more tcg_constant_* Taylor Simpson
2021-10-18 21:02 ` Richard Henderson
2021-10-19 3:44 ` Philippe Mathieu-Daudé
2021-10-12 9:31 ` [PATCH] Hexagon (target/hexagon) put writes to USR into temp until commit Taylor Simpson
2021-10-19 3:47 ` Philippe Mathieu-Daudé
2021-10-12 9:31 ` Taylor Simpson [this message]
2021-10-18 21:04 ` [PATCH 2/2] " Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1634031081-25450-4-git-send-email-tsimpson@quicinc.com \
--to=tsimpson@quicinc.com \
--cc=ale@rev.ng \
--cc=bcain@quicinc.com \
--cc=f4bug@amsat.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).