From: Steve Sistare <steven.sistare@oracle.com>
To: qemu-devel@nongnu.org
Cc: Peter Xu <peterx@redhat.com>, Fabiano Rosas <farosas@suse.de>,
David Hildenbrand <david@redhat.com>,
Philippe Mathieu-Daude <philmd@linaro.org>,
Paolo Bonzini <pbonzini@redhat.com>,
Steve Sistare <steven.sistare@oracle.com>
Subject: [PATCH V2] migration: ram block cpr blockers
Date: Fri, 14 Feb 2025 12:12:33 -0800 [thread overview]
Message-ID: <1739563953-227207-1-git-send-email-steven.sistare@oracle.com> (raw)
Unlike cpr-reboot mode, cpr-transfer mode cannot save volatile ram blocks
in the migration stream file and recreate them later, because the physical
memory for the blocks is pinned and registered for vfio. Add a blocker
for volatile ram blocks.
Also add a blocker for RAM_GUEST_MEMFD. Preserving guest_memfd may be
sufficient for CPR, but it has not been tested yet.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
---
include/exec/memory.h | 3 +++
include/exec/ramblock.h | 1 +
migration/savevm.c | 2 ++
system/physmem.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 74 insertions(+)
diff --git a/include/exec/memory.h b/include/exec/memory.h
index 9f73b59..ea5d33a 100644
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -3184,6 +3184,9 @@ bool ram_block_discard_is_disabled(void);
*/
bool ram_block_discard_is_required(void);
+void ram_block_add_cpr_blocker(RAMBlock *rb, Error **errp);
+void ram_block_del_cpr_blocker(RAMBlock *rb);
+
#endif
#endif
diff --git a/include/exec/ramblock.h b/include/exec/ramblock.h
index 0babd10..64484cd 100644
--- a/include/exec/ramblock.h
+++ b/include/exec/ramblock.h
@@ -39,6 +39,7 @@ struct RAMBlock {
/* RCU-enabled, writes protected by the ramlist lock */
QLIST_ENTRY(RAMBlock) next;
QLIST_HEAD(, RAMBlockNotifier) ramblock_notifiers;
+ Error *cpr_blocker;
int fd;
uint64_t fd_offset;
int guest_memfd;
diff --git a/migration/savevm.c b/migration/savevm.c
index bc375db..85a3559 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -3315,12 +3315,14 @@ void vmstate_register_ram(MemoryRegion *mr, DeviceState *dev)
qemu_ram_set_idstr(mr->ram_block,
memory_region_name(mr), dev);
qemu_ram_set_migratable(mr->ram_block);
+ ram_block_add_cpr_blocker(mr->ram_block, &error_fatal);
}
void vmstate_unregister_ram(MemoryRegion *mr, DeviceState *dev)
{
qemu_ram_unset_idstr(mr->ram_block);
qemu_ram_unset_migratable(mr->ram_block);
+ ram_block_del_cpr_blocker(mr->ram_block);
}
void vmstate_register_ram_global(MemoryRegion *mr)
diff --git a/system/physmem.c b/system/physmem.c
index 67c9db9..c416068 100644
--- a/system/physmem.c
+++ b/system/physmem.c
@@ -70,7 +70,10 @@
#include "qemu/pmem.h"
+#include "qapi/qapi-types-migration.h"
+#include "migration/blocker.h"
#include "migration/cpr.h"
+#include "migration/options.h"
#include "migration/vmstate.h"
#include "qemu/range.h"
@@ -1899,6 +1902,14 @@ static void ram_block_add(RAMBlock *new_block, Error **errp)
qemu_mutex_unlock_ramlist();
goto out_free;
}
+
+ error_setg(&new_block->cpr_blocker,
+ "Memory region %s uses guest_memfd, "
+ "which is not supported with CPR.",
+ memory_region_name(new_block->mr));
+ migrate_add_blocker_modes(&new_block->cpr_blocker, errp,
+ MIG_MODE_CPR_TRANSFER,
+ -1);
}
ram_size = (new_block->offset + new_block->max_length) >> TARGET_PAGE_BITS;
@@ -4059,3 +4070,60 @@ bool ram_block_discard_is_required(void)
return qatomic_read(&ram_block_discard_required_cnt) ||
qatomic_read(&ram_block_coordinated_discard_required_cnt);
}
+
+/*
+ * Return true if ram contents would be lost during CPR. Do not exclude rom,
+ * because the rom file could change in new QEMU.
+ */
+static bool ram_is_volatile(RAMBlock *rb)
+{
+ MemoryRegion *mr = rb->mr;
+
+ if (!mr || !memory_region_is_ram(mr)) {
+ return false;
+ }
+
+ /* Ram device is remapped in new QEMU */
+ if (memory_region_is_ram_device(mr)) {
+ return false;
+ }
+
+ /* Named files are remapped in new QEMU, same contents if shared (no COW) */
+ if (qemu_ram_is_shared(rb) && qemu_ram_is_named_file(rb)) {
+ return false;
+ }
+
+ /* A file descriptor is remapped in new QEMU */
+ if (rb->fd >= 0) {
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Add a blocker for each volatile ram block. This function should only be
+ * called after we know that the block is migratable. Non-migratable blocks
+ * are either re-created in new QEMU, or are handled specially, or are covered
+ * by a device-level CPR blocker.
+ */
+void ram_block_add_cpr_blocker(RAMBlock *rb, Error **errp)
+{
+ assert(qemu_ram_is_migratable(rb));
+
+ if (!ram_is_volatile(rb)) {
+ return;
+ }
+
+ error_setg(&rb->cpr_blocker,
+ "Memory region %s is volatile. share=on is required for "
+ "memory-backend objects, and aux-ram-share=on is required.",
+ memory_region_name(rb->mr));
+ migrate_add_blocker_modes(&rb->cpr_blocker, errp, MIG_MODE_CPR_TRANSFER,
+ -1);
+}
+
+void ram_block_del_cpr_blocker(RAMBlock *rb)
+{
+ migrate_del_blocker(&rb->cpr_blocker);
+}
--
1.8.3.1
next reply other threads:[~2025-02-14 20:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-14 20:12 Steve Sistare [this message]
2025-02-14 21:21 ` [PATCH V2] migration: ram block cpr blockers David Hildenbrand
2025-02-14 21:44 ` Steven Sistare
2025-02-18 17:27 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1739563953-227207-1-git-send-email-steven.sistare@oracle.com \
--to=steven.sistare@oracle.com \
--cc=david@redhat.com \
--cc=farosas@suse.de \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).